[PATCH 2/2] ARM: OMAP: SmartReflex: pass device dependent data via platform data
jean.pihet at newoldbits.com
jean.pihet at newoldbits.com
Wed Oct 3 09:32:13 EDT 2012
From: Jean Pihet <j-pihet at ti.com>
Remove the device dependent code (ex. cpu_is_xxx()) and settings
from the driver code and instead pass them via the platform
data. This allows a clean separation of the driver code and the platform
code, as required by the move of the platform header files to
include/linux/platform_data.
Note about the smartreflex functional clocks: the smartreflex fclks
are derived from sys_clk and are named "smartreflex.%d". Since the
smartreflex device names and the functional clock names are identical
the device driver code uses them to control the functional clocks.
Signed-off-by: Jean Pihet <j-pihet at ti.com>
---
arch/arm/mach-omap2/sr_device.c | 13 +++++++++++++
drivers/power/avs/smartreflex.c | 38 +++++++++----------------------------
include/linux/power/smartreflex.h | 14 ++++++++++++--
3 files changed, 34 insertions(+), 31 deletions(-)
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index cbeae56..06de443 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -121,6 +121,19 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
sr_data->senn_mod = 0x1;
sr_data->senp_mod = 0x1;
+ if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
+ sr_data->err_weight = OMAP3430_SR_ERRWEIGHT;
+ sr_data->err_maxlimit = OMAP3430_SR_ERRMAXLIMIT;
+ sr_data->accum_data = OMAP3430_SR_ACCUMDATA;
+ if (!(strcmp(sr_data->name, "smartreflex_mpu"))) {
+ sr_data->senn_avgweight = OMAP3430_SR1_SENNAVGWEIGHT;
+ sr_data->senp_avgweight = OMAP3430_SR1_SENPAVGWEIGHT;
+ } else {
+ sr_data->senn_avgweight = OMAP3430_SR2_SENNAVGWEIGHT;
+ sr_data->senp_avgweight = OMAP3430_SR2_SENPAVGWEIGHT;
+ }
+ }
+
sr_data->voltdm = voltdm_lookup(sr_dev_attr->sensor_voltdm_name);
if (IS_ERR(sr_data->voltdm)) {
pr_err("%s: Unable to get voltage domain pointer for VDD %s\n",
diff --git a/drivers/power/avs/smartreflex.c b/drivers/power/avs/smartreflex.c
index 24768a2..829467f 100644
--- a/drivers/power/avs/smartreflex.c
+++ b/drivers/power/avs/smartreflex.c
@@ -133,14 +133,11 @@ static void sr_set_clk_length(struct omap_sr *sr)
struct clk *sys_ck;
u32 sys_clk_speed;
- if (cpu_is_omap34xx())
- sys_ck = clk_get(NULL, "sys_ck");
- else
- sys_ck = clk_get(NULL, "sys_clkin_ck");
+ sys_ck = clk_get(&sr->pdev->dev, "fck");
if (IS_ERR(sys_ck)) {
- dev_err(&sr->pdev->dev, "%s: unable to get sys clk\n",
- __func__);
+ dev_err(&sr->pdev->dev, "%s: unable to get smartreflex fck %s\n",
+ __func__, dev_name(&sr->pdev->dev));
return;
}
@@ -170,28 +167,6 @@ static void sr_set_clk_length(struct omap_sr *sr)
}
}
-static void sr_set_regfields(struct omap_sr *sr)
-{
- /*
- * For time being these values are defined in smartreflex.h
- * and populated during init. May be they can be moved to board
- * file or pmic specific data structure. In that case these structure
- * fields will have to be populated using the pdata or pmic structure.
- */
- if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
- sr->err_weight = OMAP3430_SR_ERRWEIGHT;
- sr->err_maxlimit = OMAP3430_SR_ERRMAXLIMIT;
- sr->accum_data = OMAP3430_SR_ACCUMDATA;
- if (!(strcmp(sr->name, "smartreflex_mpu_iva"))) {
- sr->senn_avgweight = OMAP3430_SR1_SENNAVGWEIGHT;
- sr->senp_avgweight = OMAP3430_SR1_SENPAVGWEIGHT;
- } else {
- sr->senn_avgweight = OMAP3430_SR2_SENNAVGWEIGHT;
- sr->senp_avgweight = OMAP3430_SR2_SENPAVGWEIGHT;
- }
- }
-}
-
static void sr_start_vddautocomp(struct omap_sr *sr)
{
if (!sr_class || !(sr_class->enable) || !(sr_class->configure)) {
@@ -924,8 +899,14 @@ static int __init omap_sr_probe(struct platform_device *pdev)
sr_info->nvalue_count = pdata->nvalue_count;
sr_info->senn_mod = pdata->senn_mod;
sr_info->senp_mod = pdata->senp_mod;
+ sr_info->err_weight = pdata->err_weight;
+ sr_info->err_maxlimit = pdata->err_maxlimit;
+ sr_info->accum_data = pdata->accum_data;
+ sr_info->senn_avgweight = pdata->senn_avgweight;
+ sr_info->senp_avgweight = pdata->senp_avgweight;
sr_info->autocomp_active = false;
sr_info->ip_type = pdata->ip_type;
+
sr_info->base = ioremap(mem->start, resource_size(mem));
if (!sr_info->base) {
dev_err(&pdev->dev, "%s: ioremap fail\n", __func__);
@@ -937,7 +918,6 @@ static int __init omap_sr_probe(struct platform_device *pdev)
sr_info->irq = irq->start;
sr_set_clk_length(sr_info);
- sr_set_regfields(sr_info);
list_add(&sr_info->node, &sr_list);
diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h
index 4a496eb..c0f44c2 100644
--- a/include/linux/power/smartreflex.h
+++ b/include/linux/power/smartreflex.h
@@ -260,8 +260,13 @@ struct omap_sr_nvalue_table {
*
* @name: instance name
* @ip_type: Smartreflex IP type.
- * @senp_mod: SENPENABLE value for the sr
- * @senn_mod: SENNENABLE value for sr
+ * @senp_mod: SENPENABLE value of the sr CONFIG register
+ * @senn_mod: SENNENABLE value for sr CONFIG register
+ * @err_weight ERRWEIGHT value of the sr ERRCONFIG register
+ * @err_maxlimit ERRMAXLIMIT value of the sr ERRCONFIG register
+ * @accum_data ACCUMDATA value of the sr CONFIG register
+ * @senn_avgweight SENNAVGWEIGHT value of the sr AVGWEIGHT register
+ * @senp_avgweight SENPAVGWEIGHT value of the sr AVGWEIGHT register
* @nvalue_count: Number of distinct nvalues in the nvalue table
* @enable_on_init: whether this sr module needs to enabled at
* boot up or not.
@@ -274,6 +279,11 @@ struct omap_sr_data {
int ip_type;
u32 senp_mod;
u32 senn_mod;
+ u32 err_weight;
+ u32 err_maxlimit;
+ u32 accum_data;
+ u32 senn_avgweight;
+ u32 senp_avgweight;
int nvalue_count;
bool enable_on_init;
struct omap_sr_nvalue_table *nvalue_table;
--
1.7.10.4
More information about the linux-arm-kernel
mailing list