[PATCH v2] i2c: change the id to let the i2c-gpio work

[Bo Shen]

The i2c-gpio driver will turn the platform device ID to busnum.
When using platfrom device ID as -1, it means dynamically assigned
the busnum. When writing code, we need to make sure the busnum,
and call i2c_register_board_info(int busnum, ...) to register device
if using -1, we do not know the value of busnum. 

In order to solve this issue, set the platform device ID as a fix number
Here using 0 to match the busnum used in i2c_regsiter_board_info().

Signed-off-by: Bo Shen <voice.shen at atmel.com>
---
Change since v1
  Make the commit message more clear
---
 arch/arm/mach-at91/at91sam9260_devices.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 0f24cfb..805ef95 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -389,7 +389,7 @@ static struct i2c_gpio_platform_data pdata = {
 
 static struct platform_device at91sam9260_twi_device = {
 	.name			= "i2c-gpio",
-	.id			= -1,
+	.id			= 0,
 	.dev.platform_data	= &pdata,
 };
 
-- 
1.7.9.5