[PATCH v2] i2c: change the id to let the i2c-gpio work

[Jean Delvare]

On Fri, 12 Oct 2012 17:42:51 +0800, Bo Shen wrote:
> The i2c-gpio driver will turn the platform device ID to busnum.
> When using platfrom device ID as -1, it means dynamically assigned
> the busnum. When writing code, we need to make sure the busnum,
> and call i2c_register_board_info(int busnum, ...) to register device
> if using -1, we do not know the value of busnum. 
> 
> In order to solve this issue, set the platform device ID as a fix number
> Here using 0 to match the busnum used in i2c_regsiter_board_info().
> 
> Signed-off-by: Bo Shen <voice.shen at atmel.com>
> ---
> Change since v1
>   Make the commit message more clear
> ---
>  arch/arm/mach-at91/at91sam9260_devices.c |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
> index 0f24cfb..805ef95 100644
> --- a/arch/arm/mach-at91/at91sam9260_devices.c
> +++ b/arch/arm/mach-at91/at91sam9260_devices.c
> @@ -389,7 +389,7 @@ static struct i2c_gpio_platform_data pdata = {
>  
>  static struct platform_device at91sam9260_twi_device = {
>  	.name			= "i2c-gpio",
> -	.id			= -1,
> +	.id			= 0,
>  	.dev.platform_data	= &pdata,
>  };
>  

Acked-by: Jean Delvare <khali at linux-fr.org>

-- 
Jean Delvare