Booting vanilla kernel on the beaglebone
hvaibhav at ti.com
Tue Oct 9 01:57:22 EDT 2012
On Tue, Oct 09, 2012 at 00:46:57, Richard Cochran wrote:
> On Mon, Oct 01, 2012 at 12:27:17PM +0530, Vaibhav Hiremath wrote:
> > I have just tested it to cross-check and it boots up fine with
> > linux-next/master branch. I have pasted boot log below for your reference.
> > U-Boot#
> > U-Boot# mmc rescan 0
> > U-Boot# fatload mmc 0 80000000 am335x-evm.dtb
> > reading am335x-evm.dtb
> Two questions:
> 1. Why are you using am335x-evm.dtb and not am335x-bone.dtb here?
You can very well use bone dtb file, as of now we have very little in that
which is specific to particular board.
> 2. Can you post your .config?
I use omap2plus_defconfig + CONFIG_ARM_APPENDED_DTB + CONFIG_ARM_ATAG_DTB_COMPAT and nothing more.
More information about the linux-arm-kernel