[PATCH] ARM: Exynos5: Remove unused static uart resource information

Thomas Abraham thomas.abraham at linaro.org
Mon Oct 29 09:14:15 EDT 2012


All supported Exynos5 platforms are device tree enabled and hence the
unused static uart resource information is removed.

Signed-off-by: Thomas Abraham <thomas.abraham at linaro.org>
---
 arch/arm/mach-exynos/common.c            |    6 +-----
 arch/arm/mach-exynos/dev-uart.c          |   24 ------------------------
 arch/arm/mach-exynos/include/mach/irqs.h |    5 -----
 arch/arm/mach-exynos/include/mach/map.h  |    1 -
 4 files changed, 1 insertions(+), 35 deletions(-)

diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 1947be8..5a305f0 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -96,7 +96,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idmask		= EXYNOS5_SOC_MASK,
 		.map_io		= exynos5_map_io,
 		.init_clocks	= exynos5_init_clocks,
-		.init_uarts	= exynos_init_uarts,
 		.init		= exynos_init,
 		.name		= name_exynos5250,
 	},
@@ -735,10 +734,7 @@ static void __init exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 	for (ucnt = 0; ucnt < no; ucnt++, tcfg++)
 		tcfg->has_fracval = 1;
 
-	if (soc_is_exynos5250())
-		s3c24xx_init_uartdevs("exynos4210-uart", exynos5_uart_resources, cfg, no);
-	else
-		s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no);
+	s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no);
 }
 
 static void __iomem *exynos_eint_base;
diff --git a/arch/arm/mach-exynos/dev-uart.c b/arch/arm/mach-exynos/dev-uart.c
index 2e85c02..7c42f4b 100644
--- a/arch/arm/mach-exynos/dev-uart.c
+++ b/arch/arm/mach-exynos/dev-uart.c
@@ -52,27 +52,3 @@ struct s3c24xx_uart_resources exynos4_uart_resources[] __initdata = {
 		.nr_resources	= ARRAY_SIZE(exynos4_uart3_resource),
 	},
 };
-
-EXYNOS_UART_RESOURCE(5, 0)
-EXYNOS_UART_RESOURCE(5, 1)
-EXYNOS_UART_RESOURCE(5, 2)
-EXYNOS_UART_RESOURCE(5, 3)
-
-struct s3c24xx_uart_resources exynos5_uart_resources[] __initdata = {
-	[0] = {
-		.resources	= exynos5_uart0_resource,
-		.nr_resources	= ARRAY_SIZE(exynos5_uart0_resource),
-	},
-	[1] = {
-		.resources	= exynos5_uart1_resource,
-		.nr_resources	= ARRAY_SIZE(exynos5_uart0_resource),
-	},
-	[2] = {
-		.resources	= exynos5_uart2_resource,
-		.nr_resources	= ARRAY_SIZE(exynos5_uart2_resource),
-	},
-	[3] = {
-		.resources	= exynos5_uart3_resource,
-		.nr_resources	= ARRAY_SIZE(exynos5_uart3_resource),
-	},
-};
diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h
index 35bced6..6da3115 100644
--- a/arch/arm/mach-exynos/include/mach/irqs.h
+++ b/arch/arm/mach-exynos/include/mach/irqs.h
@@ -259,11 +259,6 @@
 #define EXYNOS5_IRQ_IEM_IEC		IRQ_SPI(48)
 #define EXYNOS5_IRQ_IEM_APC		IRQ_SPI(49)
 #define EXYNOS5_IRQ_GPIO_C2C		IRQ_SPI(50)
-#define EXYNOS5_IRQ_UART0		IRQ_SPI(51)
-#define EXYNOS5_IRQ_UART1		IRQ_SPI(52)
-#define EXYNOS5_IRQ_UART2		IRQ_SPI(53)
-#define EXYNOS5_IRQ_UART3		IRQ_SPI(54)
-#define EXYNOS5_IRQ_UART4		IRQ_SPI(55)
 #define EXYNOS5_IRQ_IIC			IRQ_SPI(56)
 #define EXYNOS5_IRQ_IIC1		IRQ_SPI(57)
 #define EXYNOS5_IRQ_IIC2		IRQ_SPI(58)
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 8480849..e737331 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -279,7 +279,6 @@
 #define EXYNOS5_PA_UART1		0x12C10000
 #define EXYNOS5_PA_UART2		0x12C20000
 #define EXYNOS5_PA_UART3		0x12C30000
-#define EXYNOS5_SZ_UART			SZ_256
 
 #define S3C_VA_UARTx(x)			(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
 
-- 
1.6.6.rc2




More information about the linux-arm-kernel mailing list