[PATCH] Add device tree file for the armadeus apf27

[Sascha Hauer]

On Tue, Oct 30, 2012 at 07:55:44PM +0000, Philippe Reynes wrote:
> 
> 
> Hi Sascha,
> >> +        osc26m {
> 
> >> +            compatible = "fsl,imx-osc26m", "fixed-clock";
> >> +            clock-frequency = <33554432>;
> 
> >Is this really correct? The Datasheet specificies 26MHz, some boards
> >have 27Mhz, but 33?
> 
> The clock value on this board is  32.768kHz, so 32768 * 1024.
> I've tried others value, all others produce weird behaviour on the serial.

Ok, so your board runs with the 32.768KHz clock input. I didn't know
there are boards that use this as the reference clock. It seems this
is not handled in the current clk code. Could you test the patch I just
sent to the mailing list (Cced you) and provide a Tested-by tag if it
works? The clock frequency provided in the device tree shouldn't make
a difference then anymore. You should specify it to 0 if you have
nothing connected there.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |