[PATCH V2 1/3] clk: mvebu: add armada-370-xp specific clocks

Mike Turquette mturquette at linaro.org
Tue Oct 30 07:20:25 EDT 2012


Quoting Gregory CLEMENT (2012-10-01 14:12:04)
> Add Armada 370/XP specific clocks: core clocks and CPU clocks.
> 
> The CPU clocks are only for Armada XP for the SMP mode.
> 
> The core clocks are clocks which have their rate set during reset. The
> code was written with the other SoCs of the mvebu family in
> mind. Adding them should be pretty straight forward. For a new
> SoC, only 3 binding have to be added:
> - one to provide the tclk frequency
> - one to provde the pclk frequency
> - and one to provide the ratio between the pclk and the children
>   clocks
> 
> Signed-off-by: Gregory CLEMENT <gregory.clement at free-electrons.com>

Thanks for sending v2 Gregory.  Functionally this series looks good but
unfortunately there are a few style and white space nitpicks below.

> diff --git a/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt
> new file mode 100644
> index 0000000..c524618
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt
> @@ -0,0 +1,21 @@
> +Device Tree Clock bindings for cpu clock of Marvell EBU platforms
> +
> +Required properties:
> +- compatible : shall be one of the following:
> +       "marvell,armada-xp-cpu-clockctrl" - cpu clocks for Armada XP
> +- reg : Address and length of the clock complex register set
> +- #clock-cells : should be set to 1.
> +- clocks : shall be the input parent clock phandle for the clock.
> +
> +cpuclk: clock-complex at d0018700 {
> +       #clock-cells = <1>;
> +       compatible = "marvell,armada-xp-cpu-clockctrl";
> +       reg = <0xd0018700 0xA0>;
> +       clocks = <&coreclk 1>;
> +}
> +
> +cpu at 0 {
> +       compatible = "marvell,sheeva-v7";

Unnecessary white space before the tab in the line above.

> diff --git a/drivers/clk/mvebu/clk-core.c b/drivers/clk/mvebu/clk-core.c
> new file mode 100644
> index 0000000..5792cb5
> --- /dev/null
> +++ b/drivers/clk/mvebu/clk-core.c
> @@ -0,0 +1,312 @@
> +/*
> + * Marvell EBU clock core handling defined at reset
> + *
> + * Copyright (C) 2012 Marvell
> + *
> + * Gregory CLEMENT <gregory.clement at free-electrons.com>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2.  This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +#include <linux/kernel.h>
> +#include <linux/clk.h>
> +#include <linux/clkdev.h>
> +#include <linux/clk-provider.h>
> +#include <linux/of_address.h>
> +#include <linux/io.h>
> +#include <linux/of.h>
> +
> +/* Sample At Reset is a 64 bit bitfiled split in two register of 32
> + * bits*/

Can you make this proper comment block style per CodingStyle convention?

> +
> +#define SARL                               0   /* Low part [0:31] */
> +#define            SARL_AXP_PCLK_FREQ_OPT          21
> +#define            SARL_AXP_PCLK_FREQ_OPT_MASK     0x7
> +#define            SARL_A370_PCLK_FREQ_OPT         11
> +#define            SARL_A370_PCLK_FREQ_OPT_MASK    0xF
> +#define            SARL_AXP_FAB_FREQ_OPT           24
> +#define            SARL_AXP_FAB_FREQ_OPT_MASK      0xF
> +#define            SARL_A370_FAB_FREQ_OPT          15
> +#define            SARL_A370_FAB_FREQ_OPT_MASK     0x1F
> +#define            SARL_A370_TCLK_FREQ_OPT         20
> +#define            SARL_A370_TCLK_FREQ_OPT_MASK    0x1
> +#define SARH                               4   /* High part [32:63] */
> +#define            SARH_AXP_PCLK_FREQ_OPT          (52-32)
> +#define            SARH_AXP_PCLK_FREQ_OPT_MASK     0x1
> +#define            SARH_AXP_PCLK_FREQ_OPT_SHIFT    3
> +#define            SARH_AXP_FAB_FREQ_OPT           (51-32)
> +#define            SARH_AXP_FAB_FREQ_OPT_MASK      0x1
> +#define            SARH_AXP_FAB_FREQ_OPT_SHIFT     4
> +
> +u32 *sar_reg;
> +int sar_reg_size;
> +
> +enum core_clk {
> +       tclk, pclk, nbclk, hclk, dramclk, clk_max
> +};
> +
> +struct core_clk_fn {
> +       u32(*get_tclk_freq) (void);
> +       u32(*get_pck_freq) (void);
> +       const int *(*get_fab_freq_opt) (void);
> +};
> +
> +/* Ratio between VCO and each of the member in the following order:
> +   CPU clock, L2 clock, DRAM controler clock, DDR clcok */

ditto

> +static const int reset_core_ratio[32][4] = {
> +       [0x01] = {1, 2, 2, 2},
> +       [0x02] = {2, 2, 6, 3},
> +       [0x03] = {2, 2, 3, 3},
> +       [0x04] = {1, 2, 3, 3},
> +       [0x05] = {1, 2, 4, 2},
> +       [0x06] = {1, 1, 2, 2},
> +       [0x07] = {2, 3, 6, 6},
> +       [0x09] = {1, 2, 6, 3},
> +       [0x0A] = {2, 4, 10, 5},
> +       [0x0C] = {1, 2, 4, 4},
> +       [0x0F] = {2, 2, 5, 5},
> +       [0x13] = {1, 1, 2, 1},
> +       [0x14] = {2, 3, 6, 3},
> +       [0x1B] = {1, 1, 1, 1},
> +};
> +
> +static struct clk *clks[clk_max];
> +
> +static struct clk_onecell_data clk_data;
> +
> +/* Frequency in MHz*/
> +static u32 armada_370_pclk[] = { 400, 533, 667, 800, 1000, 1067, 1200 };
> +
> +static u32 armada_xp_pclk[] = { 1000, 1066, 1200, 1333, 1500, 1666,
> +       1800, 2000, 667, 0, 800, 1600
> +};
> +
> +static u32 armada_370_tclk[] = { 166, 200 };
> +
> +static const int *__init armada_370_get_fab_freq_opt(void)
> +{
> +       u8 fab_freq_opt = 0;
> +
> +       fab_freq_opt = ((sar_reg[0] >> SARL_A370_FAB_FREQ_OPT) &
> +                       SARL_A370_FAB_FREQ_OPT_MASK);
> +
> +       if (reset_core_ratio[fab_freq_opt][0] == 0)
> +               return NULL;
> +       else
> +               return reset_core_ratio[fab_freq_opt];
> +}
> +
> +static u32 __init armada_370_get_pck_freq(void)
> +{
> +       u32 cpu_freq;
> +       u8 cpu_freq_select = 0;
> +
> +       cpu_freq_select = ((sar_reg[0] >> SARL_A370_PCLK_FREQ_OPT) &
> +                          SARL_A370_PCLK_FREQ_OPT_MASK);
> +       if (cpu_freq_select > ARRAY_SIZE(armada_370_pclk)) {
> +               pr_err("CPU freq select unsuported %d\n", cpu_freq_select);
> +               cpu_freq = 0;
> +       } else
> +               cpu_freq = armada_370_pclk[cpu_freq_select];
> +
> +       return cpu_freq * 1000 * 1000;
> +}
> +
> +static u32 __init armada_370_get_tclk_freq(void)
> +{
> +       u32 tclk_freq;
> +       u8 tclk_freq_select = 0;
> +
> +       tclk_freq_select = ((sar_reg[0] >> SARL_A370_TCLK_FREQ_OPT) &
> +                           SARL_A370_TCLK_FREQ_OPT_MASK);
> +       if (tclk_freq_select > ARRAY_SIZE(armada_370_tclk)) {
> +               pr_err("TCLK freq select unsuported %d\n", tclk_freq_select);
> +               tclk_freq = 0;
> +       } else
> +               tclk_freq = armada_370_tclk[tclk_freq_select];
> +
> +       return tclk_freq * 1000 * 1000;
> +}
> +
> +static const int *__init armada_xp_get_fab_freq_opt(void)
> +{
> +       u8 fab_freq_opt = 0;
> +
> +       fab_freq_opt = ((sar_reg[0] >> SARL_AXP_FAB_FREQ_OPT) &
> +                       SARL_AXP_FAB_FREQ_OPT_MASK);
> +       /* The upper bit is not contiguous to the other ones
> +        * and located in the high part of the SAR
> +        * registers */

ditto

> +       fab_freq_opt |= (((sar_reg[1] >> SARH_AXP_FAB_FREQ_OPT) &
> +                         SARH_AXP_FAB_FREQ_OPT_MASK)
> +                        << SARH_AXP_FAB_FREQ_OPT_SHIFT);
> +
> +       if (reset_core_ratio[fab_freq_opt][0] == 0)
> +               return NULL;
> +       else
> +               return reset_core_ratio[fab_freq_opt];
> +}
> +
> +static u32 __init armada_xp_get_pck_freq(void)
> +{
> +       u32 cpu_freq;
> +       u8 cpu_freq_select = 0;
> +
> +       cpu_freq_select = ((sar_reg[0] >> SARL_AXP_PCLK_FREQ_OPT) &
> +                          SARL_AXP_PCLK_FREQ_OPT_MASK);
> +       /* The upper bit is not contiguous to the other ones
> +        * and located in the high part of the SAR
> +        * registers */

ditto

> +       cpu_freq_select |= (((sar_reg[1] >> SARH_AXP_PCLK_FREQ_OPT) &
> +                            SARH_AXP_PCLK_FREQ_OPT_MASK)
> +                           << SARH_AXP_PCLK_FREQ_OPT_SHIFT);
> +       if (cpu_freq_select > ARRAY_SIZE(armada_xp_pclk)) {
> +               pr_err("CPU freq select unsuported: %d\n", cpu_freq_select);
> +               cpu_freq = 0;
> +       } else
> +               cpu_freq = armada_xp_pclk[cpu_freq_select];
> +
> +       return cpu_freq * 1000 * 1000;
> +}
> +
> +/* For Armada XP TCLK frequency is fix: 250MHz */
> +static u32 __init armada_xp_get_tclk_freq(void)
> +{
> +       return 250 * 1000 * 1000;
> +}
> +
> +void __init of_core_clk_setup(struct device_node *node,
> +                             struct core_clk_fn clk_fn)
> +{
> +       struct clk *clk;
> +       unsigned long rate;
> +       const char *clk_name;
> +       int i;
> +
> +       /* clock 0 is tclk */
> +       of_property_read_string_index(node, "clock-output-names", tclk,
> +                               &clk_name);
> +       rate = clk_fn.get_tclk_freq();
> +       if (rate != 0)
> +               clk = clk_register_fixed_rate(NULL, clk_name, NULL,
> +                                             CLK_IS_ROOT, rate);
> +       else {
> +               pr_err("Invalid freq for %s\n", clk_name);
> +               return;
> +       }
> +
> +       if (WARN_ON(IS_ERR(clk)))
> +               return;
> +       clks[tclk] = clk;
> +
> +       /* clock 1 is pclk */
> +       of_property_read_string_index(node, "clock-output-names", pclk,
> +                               &clk_name);
> +       rate = clk_fn.get_pck_freq();
> +       if (rate != 0)
> +               clk = clk_register_fixed_rate(NULL, clk_name, NULL,
> +                                             CLK_IS_ROOT, rate);
> +       else {
> +               pr_err("Invalid freq for %s\n", clk_name);
> +               return;
> +       }
> +       if (WARN_ON(IS_ERR(clk)))
> +               return;
> +       clks[pclk] = clk;
> +
> +       /* the clocks 2 to 4 are nbclk, hclk and dramclk and are all
> +        * derivated from the clock 1: pclk */

ditto

> +
> +       for (i = nbclk; i <= dramclk; i++) {
> +               const int *ratio = clk_fn.get_fab_freq_opt();
> +               const char *parent_clk_name;
> +
> +               of_property_read_string_index(node, "clock-output-names",
> +                                        i, &clk_name);
> +               of_property_read_string_index(node, "clock-output-names",
> +                                        pclk, &parent_clk_name);
> +
> +               if (ratio != NULL)
> +                       clk = clk_register_fixed_factor(NULL, clk_name,
> +                                                       parent_clk_name, 0,
> +                                                       ratio[0],
> +                                                       ratio[i - nbclk + 1]);
> +               else {
> +                       pr_err("Invalid clk ratio for %s\n", clk_name);
> +                       return;
> +               }
> +
> +               if (WARN_ON(IS_ERR(clk)))
> +                       return;
> +               clks[i] = clk;
> +       }
> +       clk_data.clk_num = ARRAY_SIZE(clks);
> +       clk_data.clks = clks;
> +       of_clk_add_provider(node, of_clk_src_onecell_get, &clk_data);
> +}
> +
> +static struct core_clk_fn armada_370_clk_fn = {
> +       .get_tclk_freq = armada_370_get_tclk_freq,
> +       .get_pck_freq = armada_370_get_pck_freq,
> +       .get_fab_freq_opt = armada_370_get_fab_freq_opt,
> +};
> +
> +static struct core_clk_fn armada_xp_clk_fn = {
> +       .get_tclk_freq = armada_xp_get_tclk_freq,
> +       .get_pck_freq = armada_xp_get_pck_freq,
> +       .get_fab_freq_opt = armada_xp_get_fab_freq_opt,
> +};
> +
> +static const __initconst struct of_device_id clk_match[] = {
> +       {
> +        .compatible = "marvell,armada-370-core-clockctrl",
> +        .data = &armada_370_clk_fn,
> +        },

Indention is a bit weird here.  The members are just indented with one
space and there is an extra white space in front of the closing bracket.
Can you re-align?

> +
> +       {
> +        .compatible = "marvell,armada-xp-core-clockctrl",
> +        .data = &armada_xp_clk_fn,
> +        },

ditto

> +       {
> +        /* sentinel */
> +        }

ditto

> +};
> +
> +void __init mvebu_core_clocks_init(void)
> +{
> +       struct device_node *np;
> +       struct resource res;
> +       void __iomem *sar_base;
> +       int i;
> +
> +       np = of_find_node_by_name(NULL, "mvebu-sar");
> +
> +       if (!np)
> +               goto err;
> +
> +       if (of_address_to_resource(np, 0, &res))
> +               goto err;
> +
> +       sar_reg_size = resource_size(&res);
> +       sar_reg = kmalloc(sar_reg_size, GFP_KERNEL);
> +
> +       sar_base = ioremap(res.start, sar_reg_size);
> +       if (sar_base == NULL)
> +               goto err;
> +       for (i = 0; i < sar_reg_size; i += sizeof(*sar_reg))
> +               sar_reg[i] = readl(sar_base + i);
> +
> +       iounmap(sar_base);
> +
> +       for_each_matching_node(np, clk_match) {
> +               const struct of_device_id *match = of_match_node(clk_match, np);
> +               struct core_clk_fn *clk_fn = match->data;
> +               of_core_clk_setup(np, *clk_fn);
> +       }
> +
> +       return;
> +err:
> +       pr_err("%s:SAR base adresse not set in DT\n", __func__);
> +       return;
> +}
> diff --git a/drivers/clk/mvebu/clk-core.h b/drivers/clk/mvebu/clk-core.h
> new file mode 100644
> index 0000000..a04f80b
> --- /dev/null
> +++ b/drivers/clk/mvebu/clk-core.h
> @@ -0,0 +1,19 @@
> +/*
> + *  * Marvell EBU clock core handling defined at reset
> + *
> + * Copyright (C) 2012 Marvell
> + *
> + * Gregory CLEMENT <gregory.clement at free-electrons.com>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2.  This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#ifndef __MVEBU_CLK_CORE_H
> +#define __MVEBU_CLK_CORE_H
> +
> +void __init of_core_clk_setup(struct device_node *node);
> +void __init mvebu_core_clocks_init(void);
> +
> +#endif
> diff --git a/drivers/clk/mvebu/clk-cpu.c b/drivers/clk/mvebu/clk-cpu.c
> new file mode 100644
> index 0000000..6b5c841
> --- /dev/null
> +++ b/drivers/clk/mvebu/clk-cpu.c
> @@ -0,0 +1,155 @@
> +/*
> + * Marvell MVEBU CPU clock handling.
> + *
> + * Copyright (C) 2012 Marvell
> + *
> + * Gregory CLEMENT <gregory.clement at free-electrons.com>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2.  This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +#include <linux/kernel.h>
> +#include <linux/clk.h>

clk-provider.h includes clk.h, so this is redundant.

Regards,
Mike



More information about the linux-arm-kernel mailing list