[PATCH 8/8] ARM: shmobile: Remove G4EVM machine support

Simon Horman horms at verge.net.au
Wed Oct 31 20:40:11 EDT 2012


From: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj at renesas.com>

This machine is using old CPU of shmobile (sh7377) and cannot obtain
machine, either.
Therefore, remove G4EVM support.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj at renesas.com>
Signed-off-by: Simon Horman <horms at verge.net.au>
---
 arch/arm/configs/g4evm_defconfig     |   57 -----
 arch/arm/mach-shmobile/Kconfig       |    9 +-
 arch/arm/mach-shmobile/Makefile      |    1 -
 arch/arm/mach-shmobile/board-g4evm.c |  384 ----------------------------------
 4 files changed, 1 insertion(+), 450 deletions(-)
 delete mode 100644 arch/arm/configs/g4evm_defconfig
 delete mode 100644 arch/arm/mach-shmobile/board-g4evm.c

diff --git a/arch/arm/configs/g4evm_defconfig b/arch/arm/configs/g4evm_defconfig
deleted file mode 100644
index 21c6d03..0000000
--- a/arch/arm/configs/g4evm_defconfig
+++ /dev/null
@@ -1,57 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
-CONFIG_ARCH_SH7377=y
-CONFIG_MACH_G4EVM=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySC4,115200 earlyprintk=sh-sci.4,115200"
-CONFIG_KEXEC=y
-CONFIG_PM=y
-# CONFIG_SUSPEND is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=8
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_FTRACE is not set
-# CONFIG_CRC32 is not set
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 73c2021..f58c3ea 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -50,12 +50,6 @@ config ARCH_EMEV2
 
 comment "SH-Mobile Board Type"
 
-config MACH_G4EVM
-	bool "G4EVM board"
-	depends on ARCH_SH7377
-	select ARCH_REQUIRE_GPIOLIB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-
 config MACH_AP4EVB
 	bool "AP4EVB board"
 	depends on ARCH_SH7372
@@ -142,7 +136,7 @@ menu "Memory configuration"
 
 config MEMORY_START
 	hex "Physical memory start address"
-	default "0x40000000" if MACH_G4EVM || MACH_AP4EVB || MACH_AG5EVM || \
+	default "0x40000000" if MACH_AP4EVB || MACH_AG5EVM || \
 				MACH_MACKEREL || MACH_BONITO || \
 				MACH_ARMADILLO800EVA
 	default "0x41000000" if MACH_KOTA2
@@ -154,7 +148,6 @@ config MEMORY_START
 
 config MEMORY_SIZE
 	hex "Physical memory size"
-	default "0x08000000" if MACH_G4EVM
 	default "0x20000000" if MACH_AG5EVM || MACH_BONITO || \
 				MACH_ARMADILLO800EVA
 	default "0x1e000000" if MACH_KOTA2
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 30a6c83..bd2633b 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -45,7 +45,6 @@ obj-$(CONFIG_ARCH_R8A7740)	+= pm-r8a7740.o
 obj-$(CONFIG_ARCH_R8A7779)	+= pm-r8a7779.o
 
 # Board objects
-obj-$(CONFIG_MACH_G4EVM)	+= board-g4evm.o
 obj-$(CONFIG_MACH_AP4EVB)	+= board-ap4evb.o
 obj-$(CONFIG_MACH_AG5EVM)	+= board-ag5evm.o
 obj-$(CONFIG_MACH_MACKEREL)	+= board-mackerel.o
diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c
deleted file mode 100644
index 35c126c..0000000
--- a/arch/arm/mach-shmobile/board-g4evm.c
+++ /dev/null
@@ -1,384 +0,0 @@
-/*
- * G4EVM board support
- *
- * Copyright (C) 2010  Magnus Damm
- * Copyright (C) 2008  Yoshihiro Shimoda
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/io.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/gpio.h>
-#include <linux/dma-mapping.h>
-#include <mach/irqs.h>
-#include <mach/sh7377.h>
-#include <mach/common.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "sh-gpio.h"
-
-/*
- * SDHI
- *
- * SDHI0 : card detection is possible
- * SDHI1 : card detection is impossible
- *
- * [G4-MAIN-BOARD]
- * JP74 : short		# DBG_2V8A    for SDHI0
- * JP75 : NC		# DBG_3V3A    for SDHI0
- * JP76 : NC		# DBG_3V3A_SD for SDHI0
- * JP77 : NC		# 3V3A_SDIO   for SDHI1
- * JP78 : short		# DBG_2V8A    for SDHI1
- * JP79 : NC		# DBG_3V3A    for SDHI1
- * JP80 : NC		# DBG_3V3A_SD for SDHI1
- *
- * [G4-CORE-BOARD]
- * S32 : all off	# to dissever from G3-CORE_DBG board
- * S33 : all off	# to dissever from G3-CORE_DBG board
- *
- * [G3-CORE_DBG-BOARD]
- * S1  : all off	# to dissever from G3-CORE_DBG board
- * S3  : all off	# to dissever from G3-CORE_DBG board
- * S4  : all off	# to dissever from G3-CORE_DBG board
- */
-
-static struct mtd_partition nor_flash_partitions[] = {
-	{
-		.name		= "loader",
-		.offset		= 0x00000000,
-		.size		= 512 * 1024,
-	},
-	{
-		.name		= "bootenv",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 512 * 1024,
-	},
-	{
-		.name		= "kernel_ro",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 8 * 1024 * 1024,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 8 * 1024 * 1024,
-	},
-	{
-		.name		= "data",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data nor_flash_data = {
-	.width		= 2,
-	.parts		= nor_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
-};
-
-static struct resource nor_flash_resources[] = {
-	[0]	= {
-		.start	= 0x00000000,
-		.end	= 0x08000000 - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device nor_flash_device = {
-	.name		= "physmap-flash",
-	.dev		= {
-		.platform_data	= &nor_flash_data,
-	},
-	.num_resources	= ARRAY_SIZE(nor_flash_resources),
-	.resource	= nor_flash_resources,
-};
-
-/* USBHS */
-static void usb_host_port_power(int port, int power)
-{
-	if (!power) /* only power-on supported for now */
-		return;
-
-	/* set VBOUT/PWEN and EXTLP0 in DVSTCTR */
-	__raw_writew(__raw_readw(IOMEM(0xe6890008)) | 0x600, IOMEM(0xe6890008));
-}
-
-static struct r8a66597_platdata usb_host_data = {
-	.on_chip = 1,
-	.port_power = usb_host_port_power,
-};
-
-static struct resource usb_host_resources[] = {
-	[0] = {
-		.name	= "USBHS",
-		.start	= 0xe6890000,
-		.end	= 0xe68900e5,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= evt2irq(0x0a20), /* USBHS_USHI0 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usb_host_device = {
-	.name		= "r8a66597_hcd",
-	.id		= 0,
-	.dev = {
-		.platform_data		= &usb_host_data,
-		.dma_mask		= NULL,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(usb_host_resources),
-	.resource	= usb_host_resources,
-};
-
-/* KEYSC */
-static struct sh_keysc_info keysc_info = {
-	.mode		= SH_KEYSC_MODE_5,
-	.scan_timing	= 3,
-	.delay		= 100,
-	.keycodes = {
-		KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F,
-		KEY_G, KEY_H, KEY_I, KEY_J, KEY_K, KEY_L,
-		KEY_M, KEY_N, KEY_U, KEY_P, KEY_Q, KEY_R,
-		KEY_S, KEY_T, KEY_U, KEY_V, KEY_W, KEY_X,
-		KEY_Y, KEY_Z, KEY_HOME, KEY_SLEEP, KEY_WAKEUP, KEY_COFFEE,
-		KEY_0, KEY_1, KEY_2, KEY_3, KEY_4, KEY_5,
-		KEY_6, KEY_7, KEY_8, KEY_9, KEY_STOP, KEY_COMPUTER,
-	},
-};
-
-static struct resource keysc_resources[] = {
-	[0] = {
-		.name	= "KEYSC",
-		.start  = 0xe61b0000,
-		.end    = 0xe61b000f,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = evt2irq(0x0be0), /* KEYSC_KEY */
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device keysc_device = {
-	.name           = "sh_keysc",
-	.id             = 0, /* keysc0 clock */
-	.num_resources  = ARRAY_SIZE(keysc_resources),
-	.resource       = keysc_resources,
-	.dev	= {
-		.platform_data	= &keysc_info,
-	},
-};
-
-/* Fixed 3.3V regulator to be used by SDHI0 and SDHI1 */
-static struct regulator_consumer_supply fixed3v3_power_consumers[] =
-{
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
-};
-
-/* SDHI */
-static struct sh_mobile_sdhi_info sdhi0_info = {
-	.tmio_caps	= MMC_CAP_SDIO_IRQ,
-};
-
-static struct resource sdhi0_resources[] = {
-	[0] = {
-		.name	= "SDHI0",
-		.start  = 0xe6d50000,
-		.end    = 0xe6d500ff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = evt2irq(0x0e00), /* SDHI0 */
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi0_device = {
-	.name           = "sh_mobile_sdhi",
-	.num_resources  = ARRAY_SIZE(sdhi0_resources),
-	.resource       = sdhi0_resources,
-	.id             = 0,
-	.dev	= {
-		.platform_data	= &sdhi0_info,
-	},
-};
-
-static struct sh_mobile_sdhi_info sdhi1_info = {
-	.tmio_caps	= MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
-};
-
-static struct resource sdhi1_resources[] = {
-	[0] = {
-		.name	= "SDHI1",
-		.start  = 0xe6d60000,
-		.end    = 0xe6d600ff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = evt2irq(0x0e80), /* SDHI1 */
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi1_device = {
-	.name           = "sh_mobile_sdhi",
-	.num_resources  = ARRAY_SIZE(sdhi1_resources),
-	.resource       = sdhi1_resources,
-	.id             = 1,
-	.dev	= {
-		.platform_data	= &sdhi1_info,
-	},
-};
-
-static struct platform_device *g4evm_devices[] __initdata = {
-	&nor_flash_device,
-	&usb_host_device,
-	&keysc_device,
-	&sdhi0_device,
-	&sdhi1_device,
-};
-
-#define GPIO_SDHID0_D0	IOMEM(0xe60520fc)
-#define GPIO_SDHID0_D1	IOMEM(0xe60520fd)
-#define GPIO_SDHID0_D2	IOMEM(0xe60520fe)
-#define GPIO_SDHID0_D3	IOMEM(0xe60520ff)
-#define GPIO_SDHICMD0	IOMEM(0xe6052100)
-
-#define GPIO_SDHID1_D0	IOMEM(0xe6052103)
-#define GPIO_SDHID1_D1	IOMEM(0xe6052104)
-#define GPIO_SDHID1_D2	IOMEM(0xe6052105)
-#define GPIO_SDHID1_D3	IOMEM(0xe6052106)
-#define GPIO_SDHICMD1	IOMEM(0xe6052107)
-
-static void __init g4evm_init(void)
-{
-	regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
-				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
-
-	sh7377_pinmux_init();
-
-	/* Lit DS14 LED */
-	gpio_request(GPIO_PORT109, NULL);
-	gpio_direction_output(GPIO_PORT109, 1);
-	gpio_export(GPIO_PORT109, 1);
-
-	/* Lit DS15 LED */
-	gpio_request(GPIO_PORT110, NULL);
-	gpio_direction_output(GPIO_PORT110, 1);
-	gpio_export(GPIO_PORT110, 1);
-
-	/* Lit DS16 LED */
-	gpio_request(GPIO_PORT112, NULL);
-	gpio_direction_output(GPIO_PORT112, 1);
-	gpio_export(GPIO_PORT112, 1);
-
-	/* Lit DS17 LED */
-	gpio_request(GPIO_PORT113, NULL);
-	gpio_direction_output(GPIO_PORT113, 1);
-	gpio_export(GPIO_PORT113, 1);
-
-	/* USBHS */
-	gpio_request(GPIO_FN_VBUS_0, NULL);
-	gpio_request(GPIO_FN_PWEN, NULL);
-	gpio_request(GPIO_FN_OVCN, NULL);
-	gpio_request(GPIO_FN_OVCN2, NULL);
-	gpio_request(GPIO_FN_EXTLP, NULL);
-	gpio_request(GPIO_FN_IDIN, NULL);
-
-	/* setup USB phy */
-	__raw_writew(0x0200, IOMEM(0xe605810a));       /* USBCR1 */
-	__raw_writew(0x00e0, IOMEM(0xe60581c0));       /* CPFCH */
-	__raw_writew(0x6010, IOMEM(0xe60581c6));       /* CGPOSR */
-	__raw_writew(0x8a0a, IOMEM(0xe605810c));       /* USBCR2 */
-
-	/* KEYSC @ CN31 */
-	gpio_request(GPIO_FN_PORT60_KEYOUT5, NULL);
-	gpio_request(GPIO_FN_PORT61_KEYOUT4, NULL);
-	gpio_request(GPIO_FN_PORT62_KEYOUT3, NULL);
-	gpio_request(GPIO_FN_PORT63_KEYOUT2, NULL);
-	gpio_request(GPIO_FN_PORT64_KEYOUT1, NULL);
-	gpio_request(GPIO_FN_PORT65_KEYOUT0, NULL);
-	gpio_request(GPIO_FN_PORT66_KEYIN0_PU, NULL);
-	gpio_request(GPIO_FN_PORT67_KEYIN1_PU, NULL);
-	gpio_request(GPIO_FN_PORT68_KEYIN2_PU, NULL);
-	gpio_request(GPIO_FN_PORT69_KEYIN3_PU, NULL);
-	gpio_request(GPIO_FN_PORT70_KEYIN4_PU, NULL);
-	gpio_request(GPIO_FN_PORT71_KEYIN5_PU, NULL);
-	gpio_request(GPIO_FN_PORT72_KEYIN6_PU, NULL);
-
-	/* SDHI0 */
-	gpio_request(GPIO_FN_SDHICLK0, NULL);
-	gpio_request(GPIO_FN_SDHICD0, NULL);
-	gpio_request(GPIO_FN_SDHID0_0, NULL);
-	gpio_request(GPIO_FN_SDHID0_1, NULL);
-	gpio_request(GPIO_FN_SDHID0_2, NULL);
-	gpio_request(GPIO_FN_SDHID0_3, NULL);
-	gpio_request(GPIO_FN_SDHICMD0, NULL);
-	gpio_request(GPIO_FN_SDHIWP0, NULL);
-	gpio_request_pullup(GPIO_SDHID0_D0);
-	gpio_request_pullup(GPIO_SDHID0_D1);
-	gpio_request_pullup(GPIO_SDHID0_D2);
-	gpio_request_pullup(GPIO_SDHID0_D3);
-	gpio_request_pullup(GPIO_SDHICMD0);
-
-	/* SDHI1 */
-	gpio_request(GPIO_FN_SDHICLK1, NULL);
-	gpio_request(GPIO_FN_SDHID1_0, NULL);
-	gpio_request(GPIO_FN_SDHID1_1, NULL);
-	gpio_request(GPIO_FN_SDHID1_2, NULL);
-	gpio_request(GPIO_FN_SDHID1_3, NULL);
-	gpio_request(GPIO_FN_SDHICMD1, NULL);
-	gpio_request_pullup(GPIO_SDHID1_D0);
-	gpio_request_pullup(GPIO_SDHID1_D1);
-	gpio_request_pullup(GPIO_SDHID1_D2);
-	gpio_request_pullup(GPIO_SDHID1_D3);
-	gpio_request_pullup(GPIO_SDHICMD1);
-
-	sh7377_add_standard_devices();
-
-	platform_add_devices(g4evm_devices, ARRAY_SIZE(g4evm_devices));
-}
-
-MACHINE_START(G4EVM, "g4evm")
-	.map_io		= sh7377_map_io,
-	.init_early	= sh7377_add_early_devices,
-	.init_irq	= sh7377_init_irq,
-	.handle_irq	= shmobile_handle_irq_intc,
-	.init_machine	= g4evm_init,
-	.init_late	= shmobile_init_late,
-	.timer		= &shmobile_timer,
-MACHINE_END
-- 
1.7.10.4




More information about the linux-arm-kernel mailing list