[PATCH 3/4] ARM: AT91: Add AT91RM9200 support to DT board

[Joachim Eastwood]

Signed-off-by: Joachim Eastwood <manabian at gmail.com>
---

Hi,

This patch has some potential issues.
Before this patch board-dt would fail building when only AT91RM9200 was enabled because at91sam926x_timer symbol would be missing. This patch uses the at91rm9200_timer which
will fail if AT91RM9200 is not enabled.

Any thoughts on solving this? As mention above this bug exists in mainline now.

I had to create a new at91rm9200_dt_initialize since at91_dt_initialize will panic when it tries to add rstc and shdwc.
Is it okay to add at91rm9200_dt_initialize or should we fix at91_dt_rstc and at91_dt_shdwc to not panic when DT nodes are not found?

regards
Joachim Eastwood

 arch/arm/mach-at91/board-dt.c | 15 +++++++++++++++
 arch/arm/mach-at91/generic.h  |  1 +
 arch/arm/mach-at91/setup.c    | 14 ++++++++++++++
 3 files changed, 30 insertions(+)

diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
index e8f45c4..0e73317 100644
--- a/arch/arm/mach-at91/board-dt.c
+++ b/arch/arm/mach-at91/board-dt.c
@@ -45,11 +45,26 @@ static void __init at91_dt_device_init(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
+static const char *at91rm9200_dt_board_compat[] __initdata = {
+	"atmel,at91rm9200",
+	NULL
+};
+
 static const char *at91_dt_board_compat[] __initdata = {
 	"atmel,at91sam9",
 	NULL
 };
 
+DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)")
+	.timer		= &at91rm9200_timer,
+	.map_io		= at91_map_io,
+	.handle_irq	= at91_aic_handle_irq,
+	.init_early	= at91rm9200_dt_initialize,
+	.init_irq	= at91_dt_init_irq,
+	.init_machine	= at91_dt_device_init,
+	.dt_compat	= at91rm9200_dt_board_compat,
+MACHINE_END
+
 DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)")
 	/* Maintainer: Atmel */
 	.timer		= &at91sam926x_timer,
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index f496506..9bb5ce5 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -20,6 +20,7 @@ extern void __init at91_init_sram(int bank, unsigned long base,
 extern void __init at91rm9200_set_type(int type);
 extern void __init at91_initialize(unsigned long main_clock);
 extern void __init at91x40_initialize(unsigned long main_clock);
+extern void __init at91rm9200_dt_initialize(void);
 extern void __init at91_dt_initialize(void);
 
  /* Interrupts */
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index da9881b..2c1fdd4 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -338,6 +338,7 @@ static void at91_dt_rstc(void)
 }
 
 static struct of_device_id ramc_ids[] = {
+	{ .compatible = "atmel,at91rm9200-sdramc" },
 	{ .compatible = "atmel,at91sam9260-sdramc" },
 	{ .compatible = "atmel,at91sam9g45-ddramc" },
 	{ /*sentinel*/ }
@@ -436,6 +437,19 @@ end:
 	of_node_put(np);
 }
 
+void __init at91rm9200_dt_initialize(void)
+{
+	at91_dt_ramc();
+
+	/* Init clock subsystem */
+	at91_dt_clock_init();
+
+	/* Register the processor-specific clocks */
+	at91_boot_soc.register_clocks();
+
+	at91_boot_soc.init();
+}
+
 void __init at91_dt_initialize(void)
 {
 	at91_dt_rstc();
-- 
1.7.12.2