[PATCH 2/2] arm: mvebu: adding SATA support: dt binding and config update

[Rob Herring]

On 10/25/2012 08:34 AM, Gregory CLEMENT wrote:
> On 10/25/2012 03:21 PM, Thomas Petazzoni wrote:
>> Jason,
>>
>> On Thu, 25 Oct 2012 09:18:18 -0400, Jason Cooper wrote:
>>
>>>> Jason, Andrew, do you want I split this patch as suggested by
>>>> Thomas or are you fine with having one single patch?
>>>
>>> Yes, please make the defconfig changes a separate patch.  Also, please
>>> make sure only the minimum is enabled (eq RAID... isn't needed).
>>
>> I haven't looked in details at the driver, but is nr-ports = <foo> the
>> right way of doing things? We may have platforms were port 0 is not
>> used, but port 1 is used, and just a number of ports doesn't allow to
>> express this.
>>
>> Shouldn't the DT property be
>>
>>   ports = <0>, <1>
>>   ports = <1>
>>   ports = <1>, <3>
>>
>> In order to allow to more precisely enabled SATA ports? Or maybe the
>> SATA ports cannot be enabled/disabled on a per-port basis, in which
>> case I'm obviously wrong here.
> 
> The actual implementation of mv_sata.c doesn't work like this. You can
> only pass the number of ports supported not the list of the port you
> want to support. I've checked in the device tree binding documentation
> _and_ also in the code.

Is that a statement about the driver or the h/w? It does not matter what
the driver does. If the h/w can support skipping a port, then the dts
should allow that.

A bitmask would be most appropriate here (and matches how AHCI does the
equivalent).

Rob