[PATCH 14/24] USB: ohci: merge ohci_finish_controller_resume with ohci_resume

Nicolas Ferre nicolas.ferre at atmel.com
Fri Oct 5 03:42:00 EDT 2012


On 10/04/2012 05:17 PM, Florian Fainelli :
> Merge ohci_finish_controller_resume with ohci_resume as suggested by Alan
> Stern. Since ohci_finish_controller_resume no longer exists, update the
> various OHCI drivers to call ohci_resume() instead. Some drivers used to set
> themselves the bit HCD_FLAG_HW_ACCESSIBLE, which is now handled by
> ohci_resume().
> 
> Signed-off-by: Florian Fainelli <florian at openwrt.org>
> ---
>  drivers/usb/host/ohci-at91.c     |    2 +-

Seems ok for AT91, so

Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>

Thanks Florian, bye,

>  drivers/usb/host/ohci-ep93xx.c   |    2 +-
>  drivers/usb/host/ohci-exynos.c   |    5 +----
>  drivers/usb/host/ohci-hcd.c      |   41 +++++++++++++++++++++++++++++++++++--
>  drivers/usb/host/ohci-hub.c      |   42 --------------------------------------
>  drivers/usb/host/ohci-omap.c     |    2 +-
>  drivers/usb/host/ohci-platform.c |    2 +-
>  drivers/usb/host/ohci-pxa27x.c   |    2 +-
>  drivers/usb/host/ohci-s3c2410.c  |    3 +--
>  drivers/usb/host/ohci-spear.c    |    2 +-
>  drivers/usb/host/ohci-tmio.c     |    2 +-
>  11 files changed, 48 insertions(+), 57 deletions(-)
> 
> diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
> index 0bf72f9..908d84a 100644
> --- a/drivers/usb/host/ohci-at91.c
> +++ b/drivers/usb/host/ohci-at91.c
> @@ -705,7 +705,7 @@ static int ohci_hcd_at91_drv_resume(struct platform_device *pdev)
>  	if (!clocked)
>  		at91_start_clock();
>  
> -	ohci_finish_controller_resume(hcd);
> +	ohci_resume(hcd, false);
>  	return 0;
>  }
>  #else
> diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
> index dbfbd1d..a982f04 100644
> --- a/drivers/usb/host/ohci-ep93xx.c
> +++ b/drivers/usb/host/ohci-ep93xx.c
> @@ -194,7 +194,7 @@ static int ohci_hcd_ep93xx_drv_resume(struct platform_device *pdev)
>  
>  	ep93xx_start_hc(&pdev->dev);
>  
> -	ohci_finish_controller_resume(hcd);
> +	ohci_resume(hcd, false);
>  	return 0;
>  }
>  #endif
> diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
> index fc3091b..53c5a989 100644
> --- a/drivers/usb/host/ohci-exynos.c
> +++ b/drivers/usb/host/ohci-exynos.c
> @@ -252,10 +252,7 @@ static int exynos_ohci_resume(struct device *dev)
>  	if (pdata && pdata->phy_init)
>  		pdata->phy_init(pdev, S5P_USB_PHY_HOST);
>  
> -	/* Mark hardware accessible again as we are out of D3 state by now */
> -	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
> -
> -	ohci_finish_controller_resume(hcd);
> +	ohci_resume(hcd, false);
>  
>  	return 0;
>  }
> diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
> index 5d30992..568bdb3 100644
> --- a/drivers/usb/host/ohci-hcd.c
> +++ b/drivers/usb/host/ohci-hcd.c
> @@ -1003,13 +1003,50 @@ static int __maybe_unused ohci_suspend(struct usb_hcd *hcd, bool do_wakeup)
>  
>  static int __maybe_unused ohci_resume(struct usb_hcd *hcd, bool hibernated)
>  {
> +	struct ohci_hcd		*ohci = hcd_to_ohci(hcd);
> +	int			port;
> +	bool			need_reinit = false;
> +
>  	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
>  
>  	/* Make sure resume from hibernation re-enumerates everything */
>  	if (hibernated)
> -		ohci_usb_reset(hcd_to_ohci(hcd));
> +		ohci_usb_reset(ohci);
> +
> +	/* See if the controller is already running or has been reset */
> +	ohci->hc_control = ohci_readl(ohci, &ohci->regs->control);
> +	if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
> +		need_reinit = true;
> +	} else {
> +		switch (ohci->hc_control & OHCI_CTRL_HCFS) {
> +		case OHCI_USB_OPER:
> +		case OHCI_USB_RESET:
> +			need_reinit = true;
> +		}
> +	}
> +
> +	/* If needed, reinitialize and suspend the root hub */
> +	if (need_reinit) {
> +		spin_lock_irq(&ohci->lock);
> +		ohci_rh_resume(ohci);
> +		ohci_rh_suspend(ohci, 0);
> +		spin_unlock_irq(&ohci->lock);
> +	}
> +
> +	/* Normally just turn on port power and enable interrupts */
> +	else {
> +		ohci_dbg(ohci, "powerup ports\n");
> +		for (port = 0; port < ohci->num_ports; port++)
> +			ohci_writel(ohci, RH_PS_PPS,
> +					&ohci->regs->roothub.portstatus[port]);
> +
> +		ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrenable);
> +		ohci_readl(ohci, &ohci->regs->intrenable);
> +		msleep(20);
> +	}
> +
> +	usb_hcd_resume_root_hub(hcd);
>  
> -	ohci_finish_controller_resume(hcd);
>  	return 0;
>  }
>  
> diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
> index 2f3619e..db09dae 100644
> --- a/drivers/usb/host/ohci-hub.c
> +++ b/drivers/usb/host/ohci-hub.c
> @@ -316,48 +316,6 @@ static int ohci_bus_resume (struct usb_hcd *hcd)
>  	return rc;
>  }
>  
> -/* Carry out the final steps of resuming the controller device */
> -static void __maybe_unused ohci_finish_controller_resume(struct usb_hcd *hcd)
> -{
> -	struct ohci_hcd		*ohci = hcd_to_ohci(hcd);
> -	int			port;
> -	bool			need_reinit = false;
> -
> -	/* See if the controller is already running or has been reset */
> -	ohci->hc_control = ohci_readl(ohci, &ohci->regs->control);
> -	if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
> -		need_reinit = true;
> -	} else {
> -		switch (ohci->hc_control & OHCI_CTRL_HCFS) {
> -		case OHCI_USB_OPER:
> -		case OHCI_USB_RESET:
> -			need_reinit = true;
> -		}
> -	}
> -
> -	/* If needed, reinitialize and suspend the root hub */
> -	if (need_reinit) {
> -		spin_lock_irq(&ohci->lock);
> -		ohci_rh_resume(ohci);
> -		ohci_rh_suspend(ohci, 0);
> -		spin_unlock_irq(&ohci->lock);
> -	}
> -
> -	/* Normally just turn on port power and enable interrupts */
> -	else {
> -		ohci_dbg(ohci, "powerup ports\n");
> -		for (port = 0; port < ohci->num_ports; port++)
> -			ohci_writel(ohci, RH_PS_PPS,
> -					&ohci->regs->roothub.portstatus[port]);
> -
> -		ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrenable);
> -		ohci_readl(ohci, &ohci->regs->intrenable);
> -		msleep(20);
> -	}
> -
> -	usb_hcd_resume_root_hub(hcd);
> -}
> -
>  /* Carry out polling-, autostop-, and autoresume-related state changes */
>  static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
>  		int any_connected, int rhsc_status)
> diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
> index f8b2d91..9fab4d8 100644
> --- a/drivers/usb/host/ohci-omap.c
> +++ b/drivers/usb/host/ohci-omap.c
> @@ -530,7 +530,7 @@ static int ohci_omap_resume(struct platform_device *dev)
>  	ohci->next_statechange = jiffies;
>  
>  	omap_ohci_clock_power(1);
> -	ohci_finish_controller_resume(hcd);
> +	ohci_resume(hcd, false);
>  	return 0;
>  }
>  
> diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
> index 1caaf65..99d1755 100644
> --- a/drivers/usb/host/ohci-platform.c
> +++ b/drivers/usb/host/ohci-platform.c
> @@ -203,7 +203,7 @@ static int ohci_platform_resume(struct device *dev)
>  			return err;
>  	}
>  
> -	ohci_finish_controller_resume(hcd);
> +	ohci_resume(hcd, false);
>  	return 0;
>  }
>  
> diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
> index 77f4402..8bffde3 100644
> --- a/drivers/usb/host/ohci-pxa27x.c
> +++ b/drivers/usb/host/ohci-pxa27x.c
> @@ -591,7 +591,7 @@ static int ohci_hcd_pxa27x_drv_resume(struct device *dev)
>  	/* Select Power Management Mode */
>  	pxa27x_ohci_select_pmm(ohci, inf->port_mode);
>  
> -	ohci_finish_controller_resume(hcd);
> +	ohci_resume(hcd, false);
>  	return 0;
>  }
>  
> diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
> index 664c869..8af53c6 100644
> --- a/drivers/usb/host/ohci-s3c2410.c
> +++ b/drivers/usb/host/ohci-s3c2410.c
> @@ -524,8 +524,7 @@ static int ohci_hcd_s3c2410_drv_resume(struct device *dev)
>  
>  	s3c2410_start_hc(pdev, hcd);
>  
> -	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
> -	ohci_finish_controller_resume(hcd);
> +	ohci_resume(hcd, false);
>  
>  	return 0;
>  }
> diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c
> index fc7305e..d607be3 100644
> --- a/drivers/usb/host/ohci-spear.c
> +++ b/drivers/usb/host/ohci-spear.c
> @@ -231,7 +231,7 @@ static int spear_ohci_hcd_drv_resume(struct platform_device *dev)
>  	ohci->next_statechange = jiffies;
>  
>  	spear_start_ohci(ohci_p);
> -	ohci_finish_controller_resume(hcd);
> +	ohci_resume(hcd, false);
>  	return 0;
>  }
>  #endif
> diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c
> index 60c2b07..2c9ab8f 100644
> --- a/drivers/usb/host/ohci-tmio.c
> +++ b/drivers/usb/host/ohci-tmio.c
> @@ -352,7 +352,7 @@ static int ohci_hcd_tmio_drv_resume(struct platform_device *dev)
>  
>  	spin_unlock_irqrestore(&tmio->lock, flags);
>  
> -	ohci_finish_controller_resume(hcd);
> +	ohci_resume(hcd, false);
>  
>  	return 0;
>  }
> 


-- 
Nicolas Ferre



More information about the linux-arm-kernel mailing list