[PATCH 2/3] arm: bcm2835: convert to the irqchip infrastructure
Thomas Petazzoni
thomas.petazzoni at free-electrons.com
Sat Oct 27 12:45:15 EDT 2012
Register the irq controller driver in the main
drivers/irqchip/irqchip.c file, and make sure that the initialization
function of the driver sets handle_arch_irq() appropriately. This
requires a bit of movement in the driver since the
bcm2835_handle_irq() must move before the armctrl_of_init() function
to avoid a forward declaration.
On the arch/arm side, use irqchip_init() as the ->init_irq() callback,
and remove the definition of ->handle_irq() since this is now done by
the irq controller driver.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
Cc: Stephen Warren <swarren at wwwdotorg.org>
---
arch/arm/Kconfig | 1 +
arch/arm/mach-bcm2835/bcm2835.c | 5 +-
drivers/irqchip/irq-bcm2835.c | 110 +++++++++++++++++++--------------------
drivers/irqchip/irqchip.c | 3 ++
drivers/irqchip/irqchip.h | 2 +
include/linux/irqchip/bcm2835.h | 29 -----------
6 files changed, 61 insertions(+), 89 deletions(-)
delete mode 100644 include/linux/irqchip/bcm2835.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 73067ef..7030500 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -347,6 +347,7 @@ config ARCH_BCM2835
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
select USE_OF
+ select USE_IRQCHIP
help
This enables support for the Broadcom BCM2835 SoC. This SoC is
use in the Raspberry Pi, and Roku 2 devices.
diff --git a/arch/arm/mach-bcm2835/bcm2835.c b/arch/arm/mach-bcm2835/bcm2835.c
index f6fea49..ab1bccd 100644
--- a/arch/arm/mach-bcm2835/bcm2835.c
+++ b/arch/arm/mach-bcm2835/bcm2835.c
@@ -13,10 +13,10 @@
*/
#include <linux/init.h>
-#include <linux/irqchip/bcm2835.h>
#include <linux/of_platform.h>
#include <linux/bcm2835_timer.h>
#include <linux/clk/bcm2835.h>
+#include <linux/irqchip.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -56,8 +56,7 @@ static const char * const bcm2835_compat[] = {
DT_MACHINE_START(BCM2835, "BCM2835")
.map_io = bcm2835_map_io,
- .init_irq = bcm2835_init_irq,
- .handle_irq = bcm2835_handle_irq,
+ .init_irq = irqchip_init,
.init_machine = bcm2835_init,
.timer = &bcm2835_timer,
.dt_compat = bcm2835_compat
diff --git a/drivers/irqchip/irq-bcm2835.c b/drivers/irqchip/irq-bcm2835.c
index dc670cc..6f845c7 100644
--- a/drivers/irqchip/irq-bcm2835.c
+++ b/drivers/irqchip/irq-bcm2835.c
@@ -49,9 +49,11 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/irqdomain.h>
-#include <linux/irqchip/bcm2835.h>
#include <asm/exception.h>
+#include <asm/mach/irq.h>
+
+#include "irqchip.h"
/* Put the bank and irq (32 bits) into the hwirq */
#define MAKE_HWIRQ(b, n) ((b << 5) | (n))
@@ -94,6 +96,52 @@ struct armctrl_ic {
static struct armctrl_ic intc __read_mostly;
+/*
+ * Handle each interrupt across the entire interrupt controller. This reads the
+ * status register before handling each interrupt, which is necessary given that
+ * handle_IRQ may briefly re-enable interrupts for soft IRQ handling.
+ */
+
+static void armctrl_handle_bank(int bank, struct pt_regs *regs)
+{
+ u32 stat, irq;
+
+ while ((stat = readl_relaxed(intc.pending[bank]))) {
+ irq = MAKE_HWIRQ(bank, ffs(stat) - 1);
+ handle_IRQ(irq_linear_revmap(intc.domain, irq), regs);
+ }
+}
+
+static void armctrl_handle_shortcut(int bank, struct pt_regs *regs,
+ u32 stat)
+{
+ u32 irq = MAKE_HWIRQ(bank, shortcuts[ffs(stat >> SHORTCUT_SHIFT) - 1]);
+ handle_IRQ(irq_linear_revmap(intc.domain, irq), regs);
+}
+
+static asmlinkage void __exception_irq_entry
+bcm2835_handle_irq(struct pt_regs *regs)
+{
+ u32 stat, irq;
+
+ while ((stat = readl_relaxed(intc.pending[0]) & BANK0_VALID_MASK)) {
+ if (stat & BANK0_HWIRQ_MASK) {
+ irq = MAKE_HWIRQ(0, ffs(stat & BANK0_HWIRQ_MASK) - 1);
+ handle_IRQ(irq_linear_revmap(intc.domain, irq), regs);
+ } else if (stat & SHORTCUT1_MASK) {
+ armctrl_handle_shortcut(1, regs, stat & SHORTCUT1_MASK);
+ } else if (stat & SHORTCUT2_MASK) {
+ armctrl_handle_shortcut(2, regs, stat & SHORTCUT2_MASK);
+ } else if (stat & BANK1_HWIRQ) {
+ armctrl_handle_bank(1, regs);
+ } else if (stat & BANK2_HWIRQ) {
+ armctrl_handle_bank(2, regs);
+ } else {
+ BUG();
+ }
+ }
+}
+
static void armctrl_mask_irq(struct irq_data *d)
{
writel_relaxed(HWIRQ_BIT(d->hwirq), intc.disable[HWIRQ_BANK(d->hwirq)]);
@@ -135,8 +183,8 @@ static struct irq_domain_ops armctrl_ops = {
.xlate = armctrl_xlate
};
-static int __init armctrl_of_init(struct device_node *node,
- struct device_node *parent)
+int __init armctrl_of_init(struct device_node *node,
+ struct device_node *parent)
{
void __iomem *base;
int irq, b, i;
@@ -164,60 +212,8 @@ static int __init armctrl_of_init(struct device_node *node,
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
}
- return 0;
-}
-
-static struct of_device_id irq_of_match[] __initconst = {
- { .compatible = "brcm,bcm2835-armctrl-ic", .data = armctrl_of_init }
-};
-
-void __init bcm2835_init_irq(void)
-{
- of_irq_init(irq_of_match);
-}
-
-/*
- * Handle each interrupt across the entire interrupt controller. This reads the
- * status register before handling each interrupt, which is necessary given that
- * handle_IRQ may briefly re-enable interrupts for soft IRQ handling.
- */
-
-static void armctrl_handle_bank(int bank, struct pt_regs *regs)
-{
- u32 stat, irq;
-
- while ((stat = readl_relaxed(intc.pending[bank]))) {
- irq = MAKE_HWIRQ(bank, ffs(stat) - 1);
- handle_IRQ(irq_linear_revmap(intc.domain, irq), regs);
- }
-}
-static void armctrl_handle_shortcut(int bank, struct pt_regs *regs,
- u32 stat)
-{
- u32 irq = MAKE_HWIRQ(bank, shortcuts[ffs(stat >> SHORTCUT_SHIFT) - 1]);
- handle_IRQ(irq_linear_revmap(intc.domain, irq), regs);
-}
-
-asmlinkage void __exception_irq_entry bcm2835_handle_irq(
- struct pt_regs *regs)
-{
- u32 stat, irq;
+ handle_arch_irq = bcm2835_handle_irq;
- while ((stat = readl_relaxed(intc.pending[0]) & BANK0_VALID_MASK)) {
- if (stat & BANK0_HWIRQ_MASK) {
- irq = MAKE_HWIRQ(0, ffs(stat & BANK0_HWIRQ_MASK) - 1);
- handle_IRQ(irq_linear_revmap(intc.domain, irq), regs);
- } else if (stat & SHORTCUT1_MASK) {
- armctrl_handle_shortcut(1, regs, stat & SHORTCUT1_MASK);
- } else if (stat & SHORTCUT2_MASK) {
- armctrl_handle_shortcut(2, regs, stat & SHORTCUT2_MASK);
- } else if (stat & BANK1_HWIRQ) {
- armctrl_handle_bank(1, regs);
- } else if (stat & BANK2_HWIRQ) {
- armctrl_handle_bank(2, regs);
- } else {
- BUG();
- }
- }
+ return 0;
}
diff --git a/drivers/irqchip/irqchip.c b/drivers/irqchip/irqchip.c
index 410f99f..f01cf6e 100644
--- a/drivers/irqchip/irqchip.c
+++ b/drivers/irqchip/irqchip.c
@@ -14,6 +14,9 @@
#include "irqchip.h"
static const struct of_device_id irqchip_of_match[] __initconst = {
+#ifdef CONFIG_ARCH_BCM2835
+ { .compatible = "brcm,bcm2835-armctrl-ic", .data = armctrl_of_init },
+#endif
{},
};
diff --git a/drivers/irqchip/irqchip.h b/drivers/irqchip/irqchip.h
index 1e7a5c2..0e68965 100644
--- a/drivers/irqchip/irqchip.h
+++ b/drivers/irqchip/irqchip.h
@@ -11,4 +11,6 @@
#ifndef _IRQCHIP_H
#define _IRQCHIP_H
+int armctrl_of_init(struct device_node *node, struct device_node *parent);
+
#endif
diff --git a/include/linux/irqchip/bcm2835.h b/include/linux/irqchip/bcm2835.h
deleted file mode 100644
index 48a859b..0000000
--- a/include/linux/irqchip/bcm2835.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright (C) 2010 Broadcom
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __LINUX_IRQCHIP_BCM2835_H_
-#define __LINUX_IRQCHIP_BCM2835_H_
-
-#include <asm/exception.h>
-
-extern void bcm2835_init_irq(void);
-
-extern asmlinkage void __exception_irq_entry bcm2835_handle_irq(
- struct pt_regs *regs);
-
-#endif
--
1.7.9.5
More information about the linux-arm-kernel
mailing list