[PATCH] at91sam9m10g45-ek: rename leds to match board

[Jean-Christophe PLAGNIOL-VILLARD]

On 21:29 Fri 26 Oct     , Alexandre Belloni wrote:
> The leds' name in the board file didn't match the names written on the
> board itsef. This can be confusing when trying to use them for another
> purpose.

It like this for so long time and I'm not really willing to touch the dts

Best Regards,
J.
> 
> Signed-off-by: Alexandre Belloni <alexandre.belloni at piout.net>
> Cc: Nicolas Ferre <nicolas.ferre at atmel.com>
> ---
>  arch/arm/boot/dts/at91sam9m10g45ek.dts  |   12 ++++++------
>  arch/arm/mach-at91/board-sam9m10g45ek.c |    8 ++++----
>  2 files changed, 10 insertions(+), 10 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
> index 15e1dd4..c58b628 100644
> --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
> +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
> @@ -93,20 +93,20 @@
>  	leds {
>  		compatible = "gpio-leds";
>  
> -		d8 {
> -			label = "d8";
> +		d3 {
> +			label = "d3";
>  			gpios = <&pioD 30 0>;
>  			linux,default-trigger = "heartbeat";
>  		};
>  
> -		d6 {
> -			label = "d6";
> +		d1 {
> +			label = "d1";
>  			gpios = <&pioD 0 1>;
>  			linux,default-trigger = "nand-disk";
>  		};
>  
> -		d7 {
> -			label = "d7";
> +		d2 {
> +			label = "d2";
>  			gpios = <&pioD 31 1>;
>  			linux,default-trigger = "mmc0";
>  		};
> diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
> index 3d48ec1..6d77687 100644
> --- a/arch/arm/mach-at91/board-sam9m10g45ek.c
> +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
> @@ -413,19 +413,19 @@ static struct ac97c_platform_data ek_ac97_data = {
>   */
>  static struct gpio_led ek_leds[] = {
>  	{	/* "top" led, red, powerled */
> -		.name			= "d8",
> +		.name			= "d3",
>  		.gpio			= AT91_PIN_PD30,
>  		.default_trigger	= "heartbeat",
>  	},
>  	{	/* "left" led, green, userled2, pwm3 */
> -		.name			= "d6",
> +		.name			= "d1",
>  		.gpio			= AT91_PIN_PD0,
>  		.active_low		= 1,
>  		.default_trigger	= "nand-disk",
>  	},
>  #if !(defined(CONFIG_LEDS_ATMEL_PWM) || defined(CONFIG_LEDS_ATMEL_PWM_MODULE))
>  	{	/* "right" led, green, userled1, pwm1 */
> -		.name			= "d7",
> +		.name			= "d2",
>  		.gpio			= AT91_PIN_PD31,
>  		.active_low		= 1,
>  		.default_trigger	= "mmc0",
> @@ -440,7 +440,7 @@ static struct gpio_led ek_leds[] = {
>  static struct gpio_led ek_pwm_led[] = {
>  #if defined(CONFIG_LEDS_ATMEL_PWM) || defined(CONFIG_LEDS_ATMEL_PWM_MODULE)
>  	{	/* "right" led, green, userled1, pwm1 */
> -		.name			= "d7",
> +		.name			= "d2",
>  		.gpio			= 1,	/* is PWM channel number */
>  		.active_low		= 1,
>  		.default_trigger	= "none",
> -- 
> 1.7.9.5
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel