[PATCH 10/10] ARM: ux500: Supply the STMPE keypad Device Tree node to the STUIB DT

[Lee Jones]

This patch allows the STMPE keypad driver to be successfully probed
and initialised during a Device Tree enabled boot sequence. It
contains all of the required properties needed to setup and map
each key on the 6x3 keypad located on the ST User Interface Board.

Acked-by: Linus Walleij <linus.walleij at linaro.org>
Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
 arch/arm/boot/dts/stuib.dtsi |   27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/arch/arm/boot/dts/stuib.dtsi b/arch/arm/boot/dts/stuib.dtsi
index b25663c..b492e3e 100644
--- a/arch/arm/boot/dts/stuib.dtsi
+++ b/arch/arm/boot/dts/stuib.dtsi
@@ -21,6 +21,33 @@
 
 				i2c-client-wake;
 				st,autosleep-timeout = <1024>;
+
+				stmpe_keypad {
+					compatible = "st,stmpe-keypad";
+
+					debounce-interval = <64>;
+					stericsson,scan-count = <8>;
+					stericsson,no-autorepeat;
+
+					linux,keymap = <0x205006b
+							0x4010074
+							0x3050072
+							0x1030004
+							0x502006a
+							0x500000a
+							0x5008b
+							0x706001c
+							0x405000b
+							0x6070003
+							0x3040067
+							0x303006c
+							0x60400e7
+							0x602009e
+							0x4020073
+							0x5050002
+							0x4030069
+							0x3020008>;
+				};
 			};
 		};
 
-- 
1.7.9.5