[PATCH 4/4] zynq: move static peripheral mappings

[Josh Cartwright]

Shifting them up into the vmalloc region prevents the following warning,
when booting a zynq qemu target with more than 512mb of RAM:

  BUG: mapping for 0xe0000000 at 0xe0000000 out of vmalloc space

In addition, it allows for reuse of these mappings when the proper
drivers issue requests via ioremap().

Signed-off-by: Josh Cartwright <josh.cartwright at ni.com>
---
 arch/arm/mach-zynq/common.c                |  8 +++----
 arch/arm/mach-zynq/include/mach/zynq_soc.h | 34 +++++++++++++++++-------------
 2 files changed, 23 insertions(+), 19 deletions(-)

diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 6ea86cf..e10268c 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -75,17 +75,17 @@ static struct map_desc io_desc[] __initdata = {
 	{
 		.virtual	= TTC0_VIRT,
 		.pfn		= __phys_to_pfn(TTC0_PHYS),
-		.length		= SZ_4K,
+		.length		= TTC0_SIZE,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= SCU_PERIPH_VIRT,
 		.pfn		= __phys_to_pfn(SCU_PERIPH_PHYS),
-		.length		= SZ_8K,
+		.length		= SCU_PERIPH_SIZE,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= PL310_L2CC_VIRT,
 		.pfn		= __phys_to_pfn(PL310_L2CC_PHYS),
-		.length		= SZ_4K,
+		.length		= PL310_L2CC_SIZE,
 		.type		= MT_DEVICE,
 	},
 
@@ -93,7 +93,7 @@ static struct map_desc io_desc[] __initdata = {
 	{
 		.virtual	= UART0_VIRT,
 		.pfn		= __phys_to_pfn(UART0_PHYS),
-		.length		= SZ_4K,
+		.length		= UART0_SIZE,
 		.type		= MT_DEVICE,
 	},
 #endif
diff --git a/arch/arm/mach-zynq/include/mach/zynq_soc.h b/arch/arm/mach-zynq/include/mach/zynq_soc.h
index 3d1c6a6..9156914 100644
--- a/arch/arm/mach-zynq/include/mach/zynq_soc.h
+++ b/arch/arm/mach-zynq/include/mach/zynq_soc.h
@@ -15,31 +15,35 @@
 #ifndef __MACH_XILINX_SOC_H__
 #define __MACH_XILINX_SOC_H__
 
+#include <asm/pgtable.h>
+
 #define PERIPHERAL_CLOCK_RATE		2500000
 
-/* For now, all mappings are flat (physical = virtual)
+/* Static peripheral mappings are mapped at the top of the
+ * vmalloc region
  */
-#define UART0_PHYS			0xE0000000
-#define UART0_VIRT			UART0_PHYS
+#define UART0_PHYS		0xE0000000
+#define UART0_SIZE		SZ_4K
+#define UART0_VIRT		(VMALLOC_END - UART0_SIZE)
 
-#define TTC0_PHYS			0xF8001000
-#define TTC0_VIRT			TTC0_PHYS
+#define TTC0_PHYS		0xF8001000
+#define TTC0_SIZE		SZ_4K
+#define TTC0_VIRT		(UART0_VIRT - TTC0_SIZE)
 
-#define PL310_L2CC_PHYS			0xF8F02000
-#define PL310_L2CC_VIRT			PL310_L2CC_PHYS
+#define PL310_L2CC_PHYS		0xF8F02000
+#define PL310_L2CC_SIZE		SZ_4K
+#define PL310_L2CC_VIRT		(TTC0_VIRT - PL310_L2CC_SIZE)
 
-#define SCU_PERIPH_PHYS			0xF8F00000
-#define SCU_PERIPH_VIRT			SCU_PERIPH_PHYS
+#define SCU_PERIPH_PHYS		0xF8F00000
+#define SCU_PERIPH_SIZE		SZ_8K
+#define SCU_PERIPH_VIRT		(PL310_L2CC_VIRT - SCU_PERIPH_SIZE)
 
 /* The following are intended for the devices that are mapped early */
 
-#define TTC0_BASE			IOMEM(TTC0_VIRT)
-#define SCU_PERIPH_BASE			IOMEM(SCU_PERIPH_VIRT)
-#define PL310_L2CC_BASE			IOMEM(PL310_L2CC_VIRT)
+#define TTC0_BASE		IOMEM(TTC0_VIRT)
+#define SCU_PERIPH_BASE		IOMEM(SCU_PERIPH_VIRT)
+#define PL310_L2CC_BASE		IOMEM(PL310_L2CC_VIRT)
 
-/*
- * Mandatory for CONFIG_LL_DEBUG, UART is mapped virtual = physical
- */
 #define LL_UART_PADDR	UART0_PHYS
 #define LL_UART_VADDR	UART0_VIRT
 
-- 
1.8.0