[git pull] signals pile 3
Russell King - ARM Linux
linux at arm.linux.org.uk
Sun Oct 14 19:16:49 EDT 2012
On Mon, Oct 15, 2012 at 12:39:40AM +0200, Daniel Mack wrote:
> Tested-by: Daniel Mack <zonque at gmail.com>
>
> Many thanks for the very prompt response!
Thanks Daniel.
I've also tested this on my OMAP4430 board running in ARM mode, so that
still works - we've covered the possibilities between us here between
ARM mode and Thumb mode, so...
Linus, could you merge this patch please, thanks.
8<===
From: Russell King <rmk+kernel at arm.linux.org.uk>
Subject: [PATCH] ARM: fix oops on initial entry to userspace with Thumb2 kernels
Daniel Mack reports an oops at boot with the latest kernels:
[ 4.896717] Internal error: Oops - undefined instruction: 0 [#1] SMP THUMB2
[ 4.904034] Modules linked in:
[ 4.907253] CPU: 0 Not tainted (3.6.0-11057-g584df1d #145)
[ 4.913372] PC is at cpsw_probe+0x45a/0x9ac
[ 4.917760] LR is at trace_hardirqs_on_caller+0x8f/0xfc
[ 4.923235] pc : [<c03493de>] lr : [<c005e81f>] psr: 60000113
[ 4.923235] sp : cf055fb0 ip : 00000000 fp : 00000000
[ 4.935246] r10: 00000000 r9 : 00000000 r8 : 00000000
[ 4.940715] r7 : 00000000 r6 : 00000000 r5 : c0344555 r4 : 00000000
[ 4.947548] r3 : cf057a40 r2 : 00000000 r1 : 00000001 r0 : 00000000
[ 4.954383] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
[ 4.961853] Control: 50c5387d Table: 8f3f4019 DAC: 00000015
[ 4.967868] Process init (pid: 1, stack limit = 0xcf054240)
[ 4.973702] Stack: (0xcf055fb0 to 0xcf056000)
[ 4.978269] 5fa0: 00000001 00000000 00000000 00000000
[ 4.986836] 5fc0: cf055fb0 c000d1a8 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.995403] 5fe0: 00000000 be9b3f10 00000000 b6f6add0 00000010 00000000 aaaabfaf a8babbaa
The analysis of this is as follows. In init/main.c, we issue:
kernel_thread(kernel_init, NULL, CLONE_FS | CLONE_SIGHAND);
This creates a new thread, which falls through to the ret_from_fork
assembly, with r4 set NULL and r5 set to kernel_init. You can see
this in your oops dump register set - r5 is 0xc0344555, which is the
address of kernel_init plus 1 which marks the function as Thumb code.
Now, let's look at this code a little closer - this is what the
disassembly looks like:
c000d180 <ret_from_fork>:
c000d180: f03a fe08 bl c0047d94 <schedule_tail>
c000d184: 2d00 cmp r5, #0
c000d186: bf1e ittt ne
c000d188: 4620 movne r0, r4
c000d18a: 46fe movne lr, pc <-- XXXXXXX
c000d18c: 46af movne pc, r5
c000d18e: 46e9 mov r9, sp
c000d190: ea4f 3959 mov.w r9, r9, lsr #13
c000d194: ea4f 3949 mov.w r9, r9, lsl #13
c000d198: e7c8 b.n c000d12c <ret_to_user>
c000d19a: bf00 nop
c000d19c: f3af 8000 nop.w
This code was introduced in 9fff2fa0db911 (arm: switch to saner
kernel_execve() semantics). I have marked one instruction, and it's
the significant one - I'll come back to that later.
Eventually, having had a successful call to kernel_execve(), kernel_init()
returns zero.
In returning, it uses the value in 'lr' which was set by the instruction
I marked above. Unfortunately, this causes lr to contain 0xc000d18e -
an even address. This switches the ISA to ARM on return but with a non
word aligned PC value.
So, what do we end up executing? Well, not the instructions above - yes
the opcodes, but they don't mean the same thing in ARM mode. In ARM mode,
it looks like this instead:
c000d18c: 46e946af strbtmi r4, [r9], pc, lsr #13
c000d190: 3959ea4f ldmdbcc r9, {r0, r1, r2, r3, r6, r9, fp, sp, lr, pc}^
c000d194: 3949ea4f stmdbcc r9, {r0, r1, r2, r3, r6, r9, fp, sp, lr, pc}^
c000d198: bf00e7c8 svclt 0x0000e7c8
c000d19c: 8000f3af andhi pc, r0, pc, lsr #7
c000d1a0: e88db092 stm sp, {r1, r4, r7, ip, sp, pc}
c000d1a4: 46e81fff ; <UNDEFINED> instruction: 0x46e81fff
c000d1a8: 8a00f3ef bhi 0xc004a16c
c000d1ac: 0a0cf08a beq 0xc03493dc
I have included more above, because it's relevant. The PSR flags which we
can see in the oops dump are nZCv, so Z and C are set.
All the above ARM instructions are not executed, except for two. c000d1a0,
which has no writeback, and writes below the current stack pointer (and
that data is lost when we take the next exception.) The other instruction
which is executed is c000d1ac, which takes us to... 0xc03493dc. However,
remember that bit 1 of the PC got set. So that makes the PC value
0xc03493de.
And that value is the value we find in the oops dump for PC. What is the
instruction here when interpreted in ARM mode?
0: f71e150c ; <UNDEFINED> instruction: 0xf71e150c
and there we have our undefined instruction (remember that the 'never'
condition code, 0xf, has been deprecated and is now always executed as it
is now being used for additional instructions.)
This path also nicely explains the state of the stack we see in the oops
dump too.
The above is a consistent and sane story for how we got to the oops dump,
which all stems from the instruction at 0xc000d18a being wrong.
Reported-by: Daniel Mack <zonque at gmail.com>
Tested-by: Daniel Mack <zonque at gmail.com>
Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
---
arch/arm/kernel/entry-common.S | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 417bac1..3471175 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -88,9 +88,9 @@ ENTRY(ret_from_fork)
bl schedule_tail
cmp r5, #0
movne r0, r4
- movne lr, pc
+ adrne lr, BSYM(1f)
movne pc, r5
- get_thread_info tsk
+1: get_thread_info tsk
b ret_slow_syscall
ENDPROC(ret_from_fork)
More information about the linux-arm-kernel
mailing list