[PATCH 1/2] input: qt1070: add pinctrl consumer

[Bo Shen]

On 10/23/2012 21:29, Jean-Christophe PLAGNIOL-VILLARD wrote:
> If no pinctrl available just report a warning as some architecture may not
> need to do anything.
>
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
> Cc: Linus Walleij <linus.walleij at linaro.org>
> Cc: linux-input at vger.kernel.org
> ---
>   drivers/input/keyboard/qt1070.c |   11 +++++++++++
>   1 file changed, 11 insertions(+)

Test it on sam9x5ek board with qt1070. It works well.

Tested-by: Bo Shen <voice.shen at atmel.com>

> diff --git a/drivers/input/keyboard/qt1070.c b/drivers/input/keyboard/qt1070.c
> index ca68f29..967734e 100644
> --- a/drivers/input/keyboard/qt1070.c
> +++ b/drivers/input/keyboard/qt1070.c
> @@ -33,6 +33,7 @@
>   #include <linux/interrupt.h>
>   #include <linux/jiffies.h>
>   #include <linux/delay.h>
> +#include <linux/pinctrl/consumer.h>
>
>   /* Address for each register */
>   #define CHIP_ID            0x00
> @@ -147,6 +148,7 @@ static int __devinit qt1070_probe(struct i2c_client *client,
>   	struct input_dev *input;
>   	int i;
>   	int err;
> +	struct pinctrl *pinctrl;
>
>   	err = i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE);
>   	if (!err) {
> @@ -155,6 +157,15 @@ static int __devinit qt1070_probe(struct i2c_client *client,
>   		return -ENODEV;
>   	}
>
> +	pinctrl = devm_pinctrl_get_select_default(&client->dev);
> +	if (IS_ERR(pinctrl)) {
> +		err = PTR_ERR(pinctrl);
> +		if (err == -EPROBE_DEFER)
> +			return err;
> +
> +		dev_warn(&client->dev, "No pinctrl provided\n");
> +	}
> +
>   	if (!client->irq) {
>   		dev_err(&client->dev, "please assign the irq to this device\n");
>   		return -EINVAL;
>