[PATCH 3/9] ARM: Kirkwood: Convert dnskw to pinctrl
Andrew Lunn
andrew at lunn.ch
Wed Oct 24 10:53:48 EDT 2012
Signed-off-by: Andrew Lunn <andrew at lunn.ch>
---
arch/arm/boot/dts/kirkwood-dnskw.dtsi | 136 +++++++++++++++++++++++++++++++++
arch/arm/mach-kirkwood/board-dnskw.c | 37 ---------
2 files changed, 136 insertions(+), 37 deletions(-)
diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
index 9b32d02..5d8cf93 100644
--- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi
+++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
@@ -36,6 +36,142 @@
};
ocp at f1000000 {
+ pinctrl: pinctrl at 10000 {
+ compatible = "marvell,88f6281-pinctrl";
+ reg = <0x10000 0x20>;
+
+ pinctrl-0 = < &pmx_uart1 &pmx_sata1
+ &pmx_gpio_24 &pmx_gpio_25
+ &pmx_led_power &pmx_led_power
+ &pmx_led_red_right_hdd
+ &pmx_led_red_left_hdd
+ &pmx_led_red_usb_325
+ &pmx_gpio_30 &pmx_gpio_31
+ &pmx_gpio_32 &pmx_gpio_33
+ &pmx_button_power
+ &pmx_led_red_usb_320
+ &pmx_power_off &pmx_power_back_on
+ &pmx_power_sata0 &pmx_power_sata1
+ &pmx_present_sata0 &pmx_present_sata1
+ &pmx_led_white_usb &pmx_fan_tacho
+ &pmx_fan_high_speed &pmx_fan_low_speed
+ &pmx_button_unmount &pmx_button_reset
+ &pmx_temp_alarm >;
+ pinctrl-names = "default";
+
+ pmx_uart1: pmx-uart1 {
+ marvell,pins = "mpp13", "mpp14";
+ marvell,function = "uart1";
+ };
+ pmx_sata1: pmx-sata1 {
+ marvell,pins = "mpp4", "mpp20", "mpp22";
+ marvell,function = "sata1";
+ };
+ pmx_gpio_24: pmx-gpio-24 {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+ pmx_gpio_25: pmx-gpio-25 {
+ marvell,pins = "mpp25";
+ marvell,function = "gpio";
+ };
+ pmx_led_power: pmx-led-power {
+ marvell,pins = "mpp26";
+ marvell,function = "gpio";
+ };
+ pmx_led_red_right_hdd: pmx-led-red-right-hdd {
+ marvell,pins = "mpp27";
+ marvell,function = "gpio";
+ };
+ pmx_led_red_left_hdd: pmx-led-red-left-hdd {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+ pmx_led_red_usb_325: pmx-led-red-usb-325 {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+ pmx_gpio_30: pmx-gpio-30 {
+ marvell,pins = "mpp30";
+ marvell,function = "gpio";
+ };
+ pmx_gpio_31: pmx-gpio-31 {
+ marvell,pins = "mpp31";
+ marvell,function = "gpio";
+ };
+ pmx_gpio_32: pmx-gpio-32 {
+ marvell,pins = "mpp32";
+ marvell,function = "gpio";
+ };
+ pmx_gpio_33: pmx-gpio-33 {
+ marvell,pins = "mpp33";
+ marvell,function = "gpio";
+ };
+ pmx_button_power: pmx-button-power {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+ pmx_led_red_usb_320: pmx-led-red-usb-320 {
+ marvell,pins = "mpp35";
+ marvell,function = "gpio";
+ };
+ pmx_power_off: pmx-power-off {
+ marvell,pins = "mpp36";
+ marvell,function = "gpio";
+ };
+ pmx_power_back_on: pmx-power-back-on {
+ marvell,pins = "mpp37";
+ marvell,function = "gpio";
+ };
+ pmx_gpio_38: pmx-gpio-38 {
+ marvell,pins = "mpp38";
+ marvell,function = "gpio";
+ };
+ pmx_power_sata0: pmx-power-sata0 {
+ marvell,pins = "mpp39";
+ marvell,function = "gpio";
+ };
+ pmx_power_sata1: pmx-power-sata1 {
+ marvell,pins = "mpp40";
+ marvell,function = "gpio";
+ };
+ pmx_present_sata0: pmx-present-sata0 {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+ pmx_present_sata1: pmx-present-sata1 {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+ pmx_led_white_usb: pmx-led-white-usb {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+ pmx_fan_tacho: pmx-fan-tacho {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+ pmx_fan_high_speed: pmx-fan-high-speed {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+ pmx_fan_low_speed: pmx-fan-low-speed {
+ marvell,pins = "mpp46";
+ marvell,function = "gpio";
+ };
+ pmx_button_unmount: pmx-button-unmount {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+ pmx_button_reset: pmx-button-reset {
+ marvell,pins = "mpp48";
+ marvell,function = "gpio";
+ };
+ pmx_temp_alarm: pmx-temp-alarm {
+ marvell,pins = "mpp49";
+ marvell,function = "gpio";
+ };
+ };
sata at 80000 {
status = "okay";
nr-ports = <2>;
diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c
index 43d16d6..ed93c09 100644
--- a/arch/arm/mach-kirkwood/board-dnskw.c
+++ b/arch/arm/mach-kirkwood/board-dnskw.c
@@ -17,46 +17,11 @@
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include "common.h"
-#include "mpp.h"
static struct mv643xx_eth_platform_data dnskw_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
-static unsigned int dnskw_mpp_config[] __initdata = {
- MPP13_UART1_TXD, /* Custom ... */
- MPP14_UART1_RXD, /* ... Controller (DNS-320 only) */
- MPP20_SATA1_ACTn, /* LED: White Right HDD */
- MPP21_SATA0_ACTn, /* LED: White Left HDD */
- MPP24_GPIO,
- MPP25_GPIO,
- MPP26_GPIO, /* LED: Power */
- MPP27_GPIO, /* LED: Red Right HDD */
- MPP28_GPIO, /* LED: Red Left HDD */
- MPP29_GPIO, /* LED: Red USB (DNS-325 only) */
- MPP30_GPIO,
- MPP31_GPIO,
- MPP32_GPIO,
- MPP33_GPO,
- MPP34_GPIO, /* Button: Front power */
- MPP35_GPIO, /* LED: Red USB (DNS-320 only) */
- MPP36_GPIO, /* Power: Turn off board */
- MPP37_GPIO, /* Power: Turn back on after power failure */
- MPP38_GPIO,
- MPP39_GPIO, /* Power: SATA0 */
- MPP40_GPIO, /* Power: SATA1 */
- MPP41_GPIO, /* SATA0 present */
- MPP42_GPIO, /* SATA1 present */
- MPP43_GPIO, /* LED: White USB */
- MPP44_GPIO, /* Fan: Tachometer Pin */
- MPP45_GPIO, /* Fan: high speed */
- MPP46_GPIO, /* Fan: low speed */
- MPP47_GPIO, /* Button: Back unmount */
- MPP48_GPIO, /* Button: Back reset */
- MPP49_GPIO, /* Temp Alarm (DNS-325) Pin of U5 (DNS-320) */
- 0
-};
-
static void dnskw_power_off(void)
{
gpio_set_value(36, 1);
@@ -76,8 +41,6 @@ static void __init dnskw_gpio_register(unsigned gpio, char *name, int def)
void __init dnskw_init(void)
{
- kirkwood_mpp_conf(dnskw_mpp_config);
-
kirkwood_ehci_init();
kirkwood_ge00_init(&dnskw_ge00_data);
--
1.7.10.4
More information about the linux-arm-kernel
mailing list