OMAP baseline test results for v3.7-rc1
Santosh Shilimkar
santosh.shilimkar at ti.com
Thu Oct 18 04:48:20 EDT 2012
Tero, paul,
On Thursday 18 October 2012 02:07 PM, Tero Kristo wrote:
> On Thu, 2012-10-18 at 06:48 +0000, Paul Walmsley wrote:
>> On Thu, 18 Oct 2012, Paul Walmsley wrote:
>>
>>> Here are some basic OMAP test results for Linux v3.7-rc1.
>>> Logs and other details at http://www.pwsan.com/omap/testlogs/test_v3.7-rc1/
>>
>> A few additional observations missing from the original message.
>>
>>> Failing tests: needing investigation
>>> ------------------------------------
>>>
>>> Boot tests:
>>>
>>> * 2420n800: boot hangs during UART initialization
>>> - http://lkml.org/lkml/2012/9/11/454
>>> - Various attempts at fixes posted; etiology known; issue still unresolved
>>>
>>> * CM-T3517: L3 in-band error with IPSS during boot
>>> - Cause unknown but see http://marc.info/?l=linux-omap&m=134833869730129&w=2
>>> - Longstanding issue; does not occur on the 3517EVM
>>>
>>> * 3517EVM & CM-T3517: boot hangs with NFS root
>>> - Likely some Kconfig, board file, and PM issues with EMAC
>>>
>>> * CM-T3517: boot hangs with MMC boot
>>> - Due to missing MMC setup in board file
>>
>> * 4430es2panda: clockevents problems early in boot
>> - boots with dummy_timer
>> - no one-shot mode so no-HZ is likely to fail
>
> I have a fix for this problem, however I am seeing this on omap4460
> panda. The root cause seems to be that local timer init for OMAP is
> using wrong interrupt number. It adds a wrong offset to the interrupt
> (OMAP_INTC_START) which should be omitted. Will send a patch soon along
> with a new version of core ret set.
>
This one is already fixed by [1] and Tony has sent pull request[1] to
arm-soc maintainers for 3.7-rc1 which includes the fix.
regards
santosh
[1] https://patchwork.kernel.org/patch/1587621/
[2] http://www.mail-archive.com/linux-omap@vger.kernel.org/msg78045.html
More information about the linux-arm-kernel
mailing list