[PATCH 1/5] ARM: PXA: Add z2-usb-switch driver

[Vasily Khoruzhick]

Ooops, sorry, please discard this patch. One file is missing after
rebase, will resend this patch shortly

On Sun, Oct 28, 2012 at 6:35 PM, Vasily Khoruzhick <anarsoul at gmail.com> wrote:
> This driver controls mode of USB port #2 pins - device or host.
>
> Signed-off-by: Vasily Khoruzhick <anarsoul at gmail.com>
> ---
>  arch/arm/mach-pxa/Kconfig  | 7 +++++++
>  arch/arm/mach-pxa/Makefile | 1 +
>  2 files changed, 8 insertions(+)
>
> diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
> index 11aa739..5fffc4b 100644
> --- a/arch/arm/mach-pxa/Kconfig
> +++ b/arch/arm/mach-pxa/Kconfig
> @@ -630,6 +630,13 @@ config MACH_ZIPIT2
>         bool "Zipit Z2 Handheld"
>         select HAVE_PWM
>         select PXA27x
> +
> +config Z2_USB_SWITCH
> +       tristate "Control the state of USB port on Zipit Z2"
> +       depends on MACH_ZIPIT2
> +       help
> +         This is a simple driver that is able to control
> +         usb mode of Zipit Z2
>  endif
>  endmenu
>
> diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
> index ee88d6e..86a032f 100644
> --- a/arch/arm/mach-pxa/Makefile
> +++ b/arch/arm/mach-pxa/Makefile
> @@ -99,3 +99,4 @@ obj-$(CONFIG_MACH_RAUMFELD_SPEAKER)   += raumfeld.o
>  obj-$(CONFIG_MACH_ZIPIT2)      += z2.o
>
>  obj-$(CONFIG_TOSA_BT)          += tosa-bt.o
> +obj-$(CONFIG_Z2_USB_SWITCH)    += z2-usb-switch.o
> --
> 1.7.12.4
>