[PATCH v2 2/2] ARM: Kirkwood: Convert all DT boards to EHCI via DT.
Andrew Lunn
andrew at lunn.ch
Sat Oct 20 07:10:01 EDT 2012
Now that the EHCI driver has DT support, drop old style configuration
of it and add DT in its place. Since all the boards enable the EHCI,
enable it by default in kirkwood.dtsi. Any new boards which don't have
USB can specifically disable it.
Signed-off-by: Andrew Lunn <andrew at lunn.ch>
---
arch/arm/boot/dts/kirkwood.dtsi | 7 +++++++
arch/arm/mach-kirkwood/board-dnskw.c | 1 -
arch/arm/mach-kirkwood/board-dockstar.c | 1 -
arch/arm/mach-kirkwood/board-dreamplug.c | 1 -
arch/arm/mach-kirkwood/board-dt.c | 1 +
arch/arm/mach-kirkwood/board-goflexnet.c | 1 -
arch/arm/mach-kirkwood/board-ib62x0.c | 1 -
arch/arm/mach-kirkwood/board-iconnect.c | 1 -
arch/arm/mach-kirkwood/board-iomega_ix2_200.c | 2 --
arch/arm/mach-kirkwood/board-km_kirkwood.c | 1 -
arch/arm/mach-kirkwood/board-lsxl.c | 1 -
arch/arm/mach-kirkwood/board-ts219.c | 1 -
12 files changed, 8 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 4e5b815..4fc7a8e 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -77,6 +77,13 @@
status = "okay";
};
+ ehci at 50000 {
+ compatible = "marvell,orion-ehci";
+ reg = <0x50000 0x1000>;
+ interrupts = <19>;
+ status = "okay";
+ };
+
sata at 80000 {
compatible = "marvell,orion-sata";
reg = <0x80000 0x5000>;
diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c
index 43d16d6..2ac6c60 100644
--- a/arch/arm/mach-kirkwood/board-dnskw.c
+++ b/arch/arm/mach-kirkwood/board-dnskw.c
@@ -78,7 +78,6 @@ void __init dnskw_init(void)
{
kirkwood_mpp_conf(dnskw_mpp_config);
- kirkwood_ehci_init();
kirkwood_ge00_init(&dnskw_ge00_data);
/* Register power-off GPIO. */
diff --git a/arch/arm/mach-kirkwood/board-dockstar.c b/arch/arm/mach-kirkwood/board-dockstar.c
index f2fbb02..e94782d 100644
--- a/arch/arm/mach-kirkwood/board-dockstar.c
+++ b/arch/arm/mach-kirkwood/board-dockstar.c
@@ -55,7 +55,6 @@ void __init dockstar_dt_init(void)
if (gpio_request(29, "USB Power Enable") != 0 ||
gpio_direction_output(29, 1) != 0)
pr_err("can't setup GPIO 29 (USB Power Enable)\n");
- kirkwood_ehci_init();
kirkwood_ge00_init(&dockstar_ge00_data);
}
diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c
index 20af53a..acdc04a 100644
--- a/arch/arm/mach-kirkwood/board-dreamplug.c
+++ b/arch/arm/mach-kirkwood/board-dreamplug.c
@@ -64,7 +64,6 @@ void __init dreamplug_init(void)
*/
kirkwood_mpp_conf(dreamplug_mpp_config);
- kirkwood_ehci_init();
kirkwood_ge00_init(&dreamplug_ge00_data);
kirkwood_ge01_init(&dreamplug_ge01_data);
kirkwood_sdio_init(&dreamplug_mvsdio_data);
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index 70c5a28..ccb91b8 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -34,6 +34,7 @@ struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL),
OF_DEV_AUXDATA("marvell,orion-nand", 0xf4000000, "orion_nand", NULL),
OF_DEV_AUXDATA("marvell,orion-crypto", 0xf1030000, "mv_crypto", NULL),
+ OF_DEV_AUXDATA("marvell,orion-ehci", 0xf1050000, "orion-ehci.0", NULL),
{},
};
diff --git a/arch/arm/mach-kirkwood/board-goflexnet.c b/arch/arm/mach-kirkwood/board-goflexnet.c
index 001ca8c..d388bea 100644
--- a/arch/arm/mach-kirkwood/board-goflexnet.c
+++ b/arch/arm/mach-kirkwood/board-goflexnet.c
@@ -65,7 +65,6 @@ void __init goflexnet_init(void)
if (gpio_request(29, "USB Power Enable") != 0 ||
gpio_direction_output(29, 1) != 0)
pr_err("can't setup GPIO 29 (USB Power Enable)\n");
- kirkwood_ehci_init();
kirkwood_ge00_init(&goflexnet_ge00_data);
}
diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c
index cfc47f8..db08e37 100644
--- a/arch/arm/mach-kirkwood/board-ib62x0.c
+++ b/arch/arm/mach-kirkwood/board-ib62x0.c
@@ -61,7 +61,6 @@ void __init ib62x0_init(void)
*/
kirkwood_mpp_conf(ib62x0_mpp_config);
- kirkwood_ehci_init();
kirkwood_ge00_init(&ib62x0_ge00_data);
if (gpio_request(IB62X0_GPIO_POWER_OFF, "ib62x0:power:off") == 0 &&
gpio_direction_output(IB62X0_GPIO_POWER_OFF, 0) == 0)
diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c
index d084b1e..8275fb0 100644
--- a/arch/arm/mach-kirkwood/board-iconnect.c
+++ b/arch/arm/mach-kirkwood/board-iconnect.c
@@ -45,7 +45,6 @@ void __init iconnect_init(void)
{
kirkwood_mpp_conf(iconnect_mpp_config);
- kirkwood_ehci_init();
kirkwood_ge00_init(&iconnect_ge00_data);
}
diff --git a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
index 158fb97..a6f3d29 100644
--- a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
+++ b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
@@ -51,7 +51,5 @@ void __init iomega_ix2_200_init(void)
*/
kirkwood_mpp_conf(iomega_ix2_200_mpp_config);
- kirkwood_ehci_init();
-
kirkwood_ge01_init(&iomega_ix2_200_ge00_data);
}
diff --git a/arch/arm/mach-kirkwood/board-km_kirkwood.c b/arch/arm/mach-kirkwood/board-km_kirkwood.c
index f7d3283..1e9ac4b 100644
--- a/arch/arm/mach-kirkwood/board-km_kirkwood.c
+++ b/arch/arm/mach-kirkwood/board-km_kirkwood.c
@@ -52,6 +52,5 @@ void __init km_kirkwood_init(void)
if (!IS_ERR(sata_clk))
sata_clk->flags |= CLK_IGNORE_UNUSED;
- kirkwood_ehci_init();
kirkwood_ge00_init(&km_kirkwood_ge00_data);
}
diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c
index 83d8975..68e64b2 100644
--- a/arch/arm/mach-kirkwood/board-lsxl.c
+++ b/arch/arm/mach-kirkwood/board-lsxl.c
@@ -125,7 +125,6 @@ void __init lsxl_init(void)
gpio_set_value(LSXL_GPIO_USB_POWER, 1);
gpio_set_value(LSXL_GPIO_HDD_POWER, 1);
- kirkwood_ehci_init();
kirkwood_ge00_init(&lsxl_ge00_data);
kirkwood_ge01_init(&lsxl_ge01_data);
platform_device_register(&lsxl_fan_device);
diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c
index 1750e68..5a031b9 100644
--- a/arch/arm/mach-kirkwood/board-ts219.c
+++ b/arch/arm/mach-kirkwood/board-ts219.c
@@ -66,7 +66,6 @@ void __init qnap_dt_ts219_init(void)
qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
kirkwood_ge00_init(&qnap_ts219_ge00_data);
- kirkwood_ehci_init();
pm_power_off = qnap_tsx1x_power_off;
}
--
1.7.10.4
More information about the linux-arm-kernel
mailing list