[PATCH] video: imxfb: Do not crash on reboot

[Uwe Kleine-König]

On Mon, Oct 08, 2012 at 10:35:36AM -0300, Fabio Estevam wrote:
> Issuing a "reboot" command after the LCD times out causes the following
> warnings:
> 
> Requesting system reboot
> ------------[ cut here ]------------
> WARNING: at drivers/clk/clk.c:471 clk_disable+0x24/0x50()
> Modules linked in:
> [<c001ad90>] (unwind_backtrace+0x0/0xf4) from [<c0025aac>] (warn_slowpath_common+0x48/0x60)
> [<c0025aac>] (warn_slowpath_common+0x48/0x60) from [<c0025ae0>] (warn_slowpath_null+0x1c/0x24)
> [<c0025ae0>] (warn_slowpath_null+0x1c/0x24) from [<c03960a0>] (clk_disable+0x24/0x50)
> [<c03960a0>] (clk_disable+0x24/0x50) from [<c02695a0>] (imxfb_disable_controller+0x48/0x7c)
> [<c02695a0>] (imxfb_disable_controller+0x48/0x7c) from [<c029d838>] (platform_drv_shutdown+0x18/0x1c)
> [<c029d838>] (platform_drv_shutdown+0x18/0x1c) from [<c02990fc>] (device_shutdown+0x48/0x14c)
> [<c02990fc>] (device_shutdown+0x48/0x14c) from [<c003d09c>] (kernel_restart_prepare+0x2c/0x3c)
> [<c003d09c>] (kernel_restart_prepare+0x2c/0x3c) from [<c003d0e4>] (kernel_restart+0xc/0x48)
> [<c003d0e4>] (kernel_restart+0xc/0x48) from [<c003d1e8>] (sys_reboot+0xc0/0x1bc)
> [<c003d1e8>] (sys_reboot+0xc0/0x1bc) from [<c0014ca0>] (ret_fast_syscall+0x0/0x2c)
> ---[ end trace da6b502ca79c854f ]---
> ------------[ cut here ]------------
> WARNING: at drivers/clk/clk.c:380 clk_unprepare+0x1c/0x2c()
> Modules linked in:
> [<c001ad90>] (unwind_backtrace+0x0/0xf4) from [<c0025aac>] (warn_slowpath_common+0x48/0x60)
> [<c0025aac>] (warn_slowpath_common+0x48/0x60) from [<c0025ae0>] (warn_slowpath_null+0x1c/0x24)
> [<c0025ae0>] (warn_slowpath_null+0x1c/0x24) from [<c0396338>] (clk_unprepare+0x1c/0x2c)
> [<c0396338>] (clk_unprepare+0x1c/0x2c) from [<c02695a8>] (imxfb_disable_controller+0x50/0x7c)
> [<c02695a8>] (imxfb_disable_controller+0x50/0x7c) from [<c029d838>] (platform_drv_shutdown+0x18/0x1c)
> [<c029d838>] (platform_drv_shutdown+0x18/0x1c) from [<c02990fc>] (device_shutdown+0x48/0x14c)
> [<c02990fc>] (device_shutdown+0x48/0x14c) from [<c003d09c>] (kernel_restart_prepare+0x2c/0x3c)
> [<c003d09c>] (kernel_restart_prepare+0x2c/0x3c) from [<c003d0e4>] (kernel_restart+0xc/0x48)
> [<c003d0e4>] (kernel_restart+0xc/0x48) from [<c003d1e8>] (sys_reboot+0xc0/0x1bc)
> [<c003d1e8>] (sys_reboot+0xc0/0x1bc) from [<c0014ca0>] (ret_fast_syscall+0x0/0x2c)
> ---[ end trace da6b502ca79c8550 ]---
> ------------[ cut here ]------------
> 
> This happens because "reboot" triggers imxfb_shutdown(), which calls
> imxfb_disable_controller with the clocks already disabled.
> 
> To prevent this, add a clock enabled status so that we can check if the clocks
> are enabled before disabling them. 
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
>  drivers/video/imxfb.c |   19 +++++++++++++------
>  1 file changed, 13 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
> index f3363b2..6acf98a 100644
> --- a/drivers/video/imxfb.c
> +++ b/drivers/video/imxfb.c
> @@ -134,6 +134,7 @@ struct imxfb_info {
>  	struct clk		*clk_ipg;
>  	struct clk		*clk_ahb;
>  	struct clk		*clk_per;
> +	int			enabled;
I didn't really know the driver, but I wonder if the name "enabled" is a
tad too generic. Maybe better "clks_enabled"?

Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |