[PATCH] ARM: zynq: move ttc timer code to drivers/clocksource
Josh Cartwright
josh.cartwright at ni.com
Mon Oct 29 14:56:30 EDT 2012
Suggested cleanup by Arnd Bergmann. Move the ttc timer.c code to
drivers/clocksource, and out of the mach-zynq directory.
The common.h (which only held the timer declaration) was renamed to
xilinx_ttc.h and moved into include/linux.
Signed-off-by: Josh Cartwright <josh.cartwright at ni.com>
Cc: Arnd Bergmann <arnd at arndb.de>
---
arch/arm/mach-zynq/Makefile | 2 +-
arch/arm/mach-zynq/common.c | 2 +-
arch/arm/mach-zynq/common.h | 24 ----
arch/arm/mach-zynq/timer.c | 298 ---------------------------------------
drivers/clocksource/Makefile | 1 +
drivers/clocksource/xilinx_ttc.c | 297 ++++++++++++++++++++++++++++++++++++++
include/linux/xilinx_ttc.h | 24 ++++
7 files changed, 324 insertions(+), 324 deletions(-)
delete mode 100644 arch/arm/mach-zynq/common.h
delete mode 100644 arch/arm/mach-zynq/timer.c
create mode 100644 drivers/clocksource/xilinx_ttc.c
create mode 100644 include/linux/xilinx_ttc.h
diff --git a/arch/arm/mach-zynq/Makefile b/arch/arm/mach-zynq/Makefile
index 397268c..320faed 100644
--- a/arch/arm/mach-zynq/Makefile
+++ b/arch/arm/mach-zynq/Makefile
@@ -3,4 +3,4 @@
#
# Common support
-obj-y := common.o timer.o
+obj-y := common.o
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 93b9105..eecc898 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -22,6 +22,7 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/of.h>
+#include <linux/xilinx_ttc.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -31,7 +32,6 @@
#include <asm/hardware/cache-l2x0.h>
#include <mach/zynq_soc.h>
-#include "common.h"
static struct of_device_id zynq_of_bus_ids[] __initdata = {
{ .compatible = "simple-bus", },
diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h
deleted file mode 100644
index a009644..0000000
--- a/arch/arm/mach-zynq/common.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * This file contains common function prototypes to avoid externs
- * in the c files.
- *
- * Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_ZYNQ_COMMON_H__
-#define __MACH_ZYNQ_COMMON_H__
-
-#include <asm/mach/time.h>
-
-extern struct sys_timer xttcpss_sys_timer;
-
-#endif
diff --git a/arch/arm/mach-zynq/timer.c b/arch/arm/mach-zynq/timer.c
deleted file mode 100644
index c2c96cc..0000000
--- a/arch/arm/mach-zynq/timer.c
+++ /dev/null
@@ -1,298 +0,0 @@
-/*
- * This file contains driver for the Xilinx PS Timer Counter IP.
- *
- * Copyright (C) 2011 Xilinx
- *
- * based on arch/mips/kernel/time.c timer driver
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/types.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/io.h>
-
-#include <asm/mach/time.h>
-#include <mach/zynq_soc.h>
-#include "common.h"
-
-#define IRQ_TIMERCOUNTER0 42
-
-/*
- * This driver configures the 2 16-bit count-up timers as follows:
- *
- * T1: Timer 1, clocksource for generic timekeeping
- * T2: Timer 2, clockevent source for hrtimers
- * T3: Timer 3, <unused>
- *
- * The input frequency to the timer module for emulation is 2.5MHz which is
- * common to all the timer channels (T1, T2, and T3). With a pre-scaler of 32,
- * the timers are clocked at 78.125KHz (12.8 us resolution).
- *
- * The input frequency to the timer module in silicon will be 200MHz. With the
- * pre-scaler of 32, the timers are clocked at 6.25MHz (160ns resolution).
- */
-#define XTTCPSS_CLOCKSOURCE 0 /* Timer 1 as a generic timekeeping */
-#define XTTCPSS_CLOCKEVENT 1 /* Timer 2 as a clock event */
-
-#define XTTCPSS_TIMER_BASE TTC0_BASE
-#define XTTCPCC_EVENT_TIMER_IRQ (IRQ_TIMERCOUNTER0 + 1)
-/*
- * Timer Register Offset Definitions of Timer 1, Increment base address by 4
- * and use same offsets for Timer 2
- */
-#define XTTCPSS_CLK_CNTRL_OFFSET 0x00 /* Clock Control Reg, RW */
-#define XTTCPSS_CNT_CNTRL_OFFSET 0x0C /* Counter Control Reg, RW */
-#define XTTCPSS_COUNT_VAL_OFFSET 0x18 /* Counter Value Reg, RO */
-#define XTTCPSS_INTR_VAL_OFFSET 0x24 /* Interval Count Reg, RW */
-#define XTTCPSS_MATCH_1_OFFSET 0x30 /* Match 1 Value Reg, RW */
-#define XTTCPSS_MATCH_2_OFFSET 0x3C /* Match 2 Value Reg, RW */
-#define XTTCPSS_MATCH_3_OFFSET 0x48 /* Match 3 Value Reg, RW */
-#define XTTCPSS_ISR_OFFSET 0x54 /* Interrupt Status Reg, RO */
-#define XTTCPSS_IER_OFFSET 0x60 /* Interrupt Enable Reg, RW */
-
-#define XTTCPSS_CNT_CNTRL_DISABLE_MASK 0x1
-
-/* Setup the timers to use pre-scaling */
-
-#define TIMER_RATE (PERIPHERAL_CLOCK_RATE / 32)
-
-/**
- * struct xttcpss_timer - This definition defines local timer structure
- *
- * @base_addr: Base address of timer
- **/
-struct xttcpss_timer {
- void __iomem *base_addr;
-};
-
-static struct xttcpss_timer timers[2];
-static struct clock_event_device xttcpss_clockevent;
-
-/**
- * xttcpss_set_interval - Set the timer interval value
- *
- * @timer: Pointer to the timer instance
- * @cycles: Timer interval ticks
- **/
-static void xttcpss_set_interval(struct xttcpss_timer *timer,
- unsigned long cycles)
-{
- u32 ctrl_reg;
-
- /* Disable the counter, set the counter value and re-enable counter */
- ctrl_reg = __raw_readl(timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
- ctrl_reg |= XTTCPSS_CNT_CNTRL_DISABLE_MASK;
- __raw_writel(ctrl_reg, timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
-
- __raw_writel(cycles, timer->base_addr + XTTCPSS_INTR_VAL_OFFSET);
-
- /* Reset the counter (0x10) so that it starts from 0, one-shot
- mode makes this needed for timing to be right. */
- ctrl_reg |= 0x10;
- ctrl_reg &= ~XTTCPSS_CNT_CNTRL_DISABLE_MASK;
- __raw_writel(ctrl_reg, timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
-}
-
-/**
- * xttcpss_clock_event_interrupt - Clock event timer interrupt handler
- *
- * @irq: IRQ number of the Timer
- * @dev_id: void pointer to the xttcpss_timer instance
- *
- * returns: Always IRQ_HANDLED - success
- **/
-static irqreturn_t xttcpss_clock_event_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = &xttcpss_clockevent;
- struct xttcpss_timer *timer = dev_id;
-
- /* Acknowledge the interrupt and call event handler */
- __raw_writel(__raw_readl(timer->base_addr + XTTCPSS_ISR_OFFSET),
- timer->base_addr + XTTCPSS_ISR_OFFSET);
-
- evt->event_handler(evt);
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction event_timer_irq = {
- .name = "xttcpss clockevent",
- .flags = IRQF_DISABLED | IRQF_TIMER,
- .handler = xttcpss_clock_event_interrupt,
-};
-
-/**
- * xttcpss_timer_hardware_init - Initialize the timer hardware
- *
- * Initialize the hardware to start the clock source, get the clock
- * event timer ready to use, and hook up the interrupt.
- **/
-static void __init xttcpss_timer_hardware_init(void)
-{
- /* Setup the clock source counter to be an incrementing counter
- * with no interrupt and it rolls over at 0xFFFF. Pre-scale
- it by 32 also. Let it start running now.
- */
- timers[XTTCPSS_CLOCKSOURCE].base_addr = XTTCPSS_TIMER_BASE;
-
- __raw_writel(0x0, timers[XTTCPSS_CLOCKSOURCE].base_addr +
- XTTCPSS_IER_OFFSET);
- __raw_writel(0x9, timers[XTTCPSS_CLOCKSOURCE].base_addr +
- XTTCPSS_CLK_CNTRL_OFFSET);
- __raw_writel(0x10, timers[XTTCPSS_CLOCKSOURCE].base_addr +
- XTTCPSS_CNT_CNTRL_OFFSET);
-
- /* Setup the clock event timer to be an interval timer which
- * is prescaled by 32 using the interval interrupt. Leave it
- * disabled for now.
- */
-
- timers[XTTCPSS_CLOCKEVENT].base_addr = XTTCPSS_TIMER_BASE + 4;
-
- __raw_writel(0x23, timers[XTTCPSS_CLOCKEVENT].base_addr +
- XTTCPSS_CNT_CNTRL_OFFSET);
- __raw_writel(0x9, timers[XTTCPSS_CLOCKEVENT].base_addr +
- XTTCPSS_CLK_CNTRL_OFFSET);
- __raw_writel(0x1, timers[XTTCPSS_CLOCKEVENT].base_addr +
- XTTCPSS_IER_OFFSET);
-
- /* Setup IRQ the clock event timer */
- event_timer_irq.dev_id = &timers[XTTCPSS_CLOCKEVENT];
- setup_irq(XTTCPCC_EVENT_TIMER_IRQ, &event_timer_irq);
-}
-
-/**
- * __raw_readl_cycles - Reads the timer counter register
- *
- * returns: Current timer counter register value
- **/
-static cycle_t __raw_readl_cycles(struct clocksource *cs)
-{
- struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKSOURCE];
-
- return (cycle_t)__raw_readl(timer->base_addr +
- XTTCPSS_COUNT_VAL_OFFSET);
-}
-
-
-/*
- * Instantiate and initialize the clock source structure
- */
-static struct clocksource clocksource_xttcpss = {
- .name = "xttcpss_timer1",
- .rating = 200, /* Reasonable clock source */
- .read = __raw_readl_cycles,
- .mask = CLOCKSOURCE_MASK(16),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-
-/**
- * xttcpss_set_next_event - Sets the time interval for next event
- *
- * @cycles: Timer interval ticks
- * @evt: Address of clock event instance
- *
- * returns: Always 0 - success
- **/
-static int xttcpss_set_next_event(unsigned long cycles,
- struct clock_event_device *evt)
-{
- struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKEVENT];
-
- xttcpss_set_interval(timer, cycles);
- return 0;
-}
-
-/**
- * xttcpss_set_mode - Sets the mode of timer
- *
- * @mode: Mode to be set
- * @evt: Address of clock event instance
- **/
-static void xttcpss_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKEVENT];
- u32 ctrl_reg;
-
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- xttcpss_set_interval(timer, TIMER_RATE / HZ);
- break;
- case CLOCK_EVT_MODE_ONESHOT:
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- ctrl_reg = __raw_readl(timer->base_addr +
- XTTCPSS_CNT_CNTRL_OFFSET);
- ctrl_reg |= XTTCPSS_CNT_CNTRL_DISABLE_MASK;
- __raw_writel(ctrl_reg,
- timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
- break;
- case CLOCK_EVT_MODE_RESUME:
- ctrl_reg = __raw_readl(timer->base_addr +
- XTTCPSS_CNT_CNTRL_OFFSET);
- ctrl_reg &= ~XTTCPSS_CNT_CNTRL_DISABLE_MASK;
- __raw_writel(ctrl_reg,
- timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
- break;
- }
-}
-
-/*
- * Instantiate and initialize the clock event structure
- */
-static struct clock_event_device xttcpss_clockevent = {
- .name = "xttcpss_timer2",
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .set_next_event = xttcpss_set_next_event,
- .set_mode = xttcpss_set_mode,
- .rating = 200,
-};
-
-/**
- * xttcpss_timer_init - Initialize the timer
- *
- * Initializes the timer hardware and register the clock source and clock event
- * timers with Linux kernal timer framework
- **/
-static void __init xttcpss_timer_init(void)
-{
- xttcpss_timer_hardware_init();
- clocksource_register_hz(&clocksource_xttcpss, TIMER_RATE);
-
- /* Calculate the parameters to allow the clockevent to operate using
- integer math
- */
- clockevents_calc_mult_shift(&xttcpss_clockevent, TIMER_RATE, 4);
-
- xttcpss_clockevent.max_delta_ns =
- clockevent_delta2ns(0xfffe, &xttcpss_clockevent);
- xttcpss_clockevent.min_delta_ns =
- clockevent_delta2ns(1, &xttcpss_clockevent);
-
- /* Indicate that clock event is on 1st CPU as SMP boot needs it */
-
- xttcpss_clockevent.cpumask = cpumask_of(0);
- clockevents_register_device(&xttcpss_clockevent);
-}
-
-/*
- * Instantiate and initialize the system timer structure
- */
-struct sys_timer xttcpss_sys_timer = {
- .init = xttcpss_timer_init,
-};
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 603be36..f27c7b1 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -14,5 +14,6 @@ obj-$(CONFIG_DW_APB_TIMER_OF) += dw_apb_timer_of.o
obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o
obj-$(CONFIG_ARMADA_370_XP_TIMER) += time-armada-370-xp.o
obj-$(CONFIG_ARCH_BCM2835) += bcm2835_timer.o
+obj-$(CONFIG_ARCH_ZYNQ) += xilinx_ttc.o
obj-$(CONFIG_CLKSRC_ARM_GENERIC) += arm_generic.o
diff --git a/drivers/clocksource/xilinx_ttc.c b/drivers/clocksource/xilinx_ttc.c
new file mode 100644
index 0000000..3296556
--- /dev/null
+++ b/drivers/clocksource/xilinx_ttc.c
@@ -0,0 +1,297 @@
+/*
+ * This file contains driver for the Xilinx PS Timer Counter IP.
+ *
+ * Copyright (C) 2011 Xilinx
+ *
+ * based on arch/mips/kernel/time.c timer driver
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/types.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/io.h>
+
+#include <asm/mach/time.h>
+#include <mach/zynq_soc.h>
+
+#define IRQ_TIMERCOUNTER0 42
+
+/*
+ * This driver configures the 2 16-bit count-up timers as follows:
+ *
+ * T1: Timer 1, clocksource for generic timekeeping
+ * T2: Timer 2, clockevent source for hrtimers
+ * T3: Timer 3, <unused>
+ *
+ * The input frequency to the timer module for emulation is 2.5MHz which is
+ * common to all the timer channels (T1, T2, and T3). With a pre-scaler of 32,
+ * the timers are clocked at 78.125KHz (12.8 us resolution).
+ *
+ * The input frequency to the timer module in silicon will be 200MHz. With the
+ * pre-scaler of 32, the timers are clocked at 6.25MHz (160ns resolution).
+ */
+#define XTTCPSS_CLOCKSOURCE 0 /* Timer 1 as a generic timekeeping */
+#define XTTCPSS_CLOCKEVENT 1 /* Timer 2 as a clock event */
+
+#define XTTCPSS_TIMER_BASE TTC0_BASE
+#define XTTCPCC_EVENT_TIMER_IRQ (IRQ_TIMERCOUNTER0 + 1)
+/*
+ * Timer Register Offset Definitions of Timer 1, Increment base address by 4
+ * and use same offsets for Timer 2
+ */
+#define XTTCPSS_CLK_CNTRL_OFFSET 0x00 /* Clock Control Reg, RW */
+#define XTTCPSS_CNT_CNTRL_OFFSET 0x0C /* Counter Control Reg, RW */
+#define XTTCPSS_COUNT_VAL_OFFSET 0x18 /* Counter Value Reg, RO */
+#define XTTCPSS_INTR_VAL_OFFSET 0x24 /* Interval Count Reg, RW */
+#define XTTCPSS_MATCH_1_OFFSET 0x30 /* Match 1 Value Reg, RW */
+#define XTTCPSS_MATCH_2_OFFSET 0x3C /* Match 2 Value Reg, RW */
+#define XTTCPSS_MATCH_3_OFFSET 0x48 /* Match 3 Value Reg, RW */
+#define XTTCPSS_ISR_OFFSET 0x54 /* Interrupt Status Reg, RO */
+#define XTTCPSS_IER_OFFSET 0x60 /* Interrupt Enable Reg, RW */
+
+#define XTTCPSS_CNT_CNTRL_DISABLE_MASK 0x1
+
+/* Setup the timers to use pre-scaling */
+
+#define TIMER_RATE (PERIPHERAL_CLOCK_RATE / 32)
+
+/**
+ * struct xttcpss_timer - This definition defines local timer structure
+ *
+ * @base_addr: Base address of timer
+ **/
+struct xttcpss_timer {
+ void __iomem *base_addr;
+};
+
+static struct xttcpss_timer timers[2];
+static struct clock_event_device xttcpss_clockevent;
+
+/**
+ * xttcpss_set_interval - Set the timer interval value
+ *
+ * @timer: Pointer to the timer instance
+ * @cycles: Timer interval ticks
+ **/
+static void xttcpss_set_interval(struct xttcpss_timer *timer,
+ unsigned long cycles)
+{
+ u32 ctrl_reg;
+
+ /* Disable the counter, set the counter value and re-enable counter */
+ ctrl_reg = __raw_readl(timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+ ctrl_reg |= XTTCPSS_CNT_CNTRL_DISABLE_MASK;
+ __raw_writel(ctrl_reg, timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+
+ __raw_writel(cycles, timer->base_addr + XTTCPSS_INTR_VAL_OFFSET);
+
+ /* Reset the counter (0x10) so that it starts from 0, one-shot
+ mode makes this needed for timing to be right. */
+ ctrl_reg |= 0x10;
+ ctrl_reg &= ~XTTCPSS_CNT_CNTRL_DISABLE_MASK;
+ __raw_writel(ctrl_reg, timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+}
+
+/**
+ * xttcpss_clock_event_interrupt - Clock event timer interrupt handler
+ *
+ * @irq: IRQ number of the Timer
+ * @dev_id: void pointer to the xttcpss_timer instance
+ *
+ * returns: Always IRQ_HANDLED - success
+ **/
+static irqreturn_t xttcpss_clock_event_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = &xttcpss_clockevent;
+ struct xttcpss_timer *timer = dev_id;
+
+ /* Acknowledge the interrupt and call event handler */
+ __raw_writel(__raw_readl(timer->base_addr + XTTCPSS_ISR_OFFSET),
+ timer->base_addr + XTTCPSS_ISR_OFFSET);
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction event_timer_irq = {
+ .name = "xttcpss clockevent",
+ .flags = IRQF_DISABLED | IRQF_TIMER,
+ .handler = xttcpss_clock_event_interrupt,
+};
+
+/**
+ * xttcpss_timer_hardware_init - Initialize the timer hardware
+ *
+ * Initialize the hardware to start the clock source, get the clock
+ * event timer ready to use, and hook up the interrupt.
+ **/
+static void __init xttcpss_timer_hardware_init(void)
+{
+ /* Setup the clock source counter to be an incrementing counter
+ * with no interrupt and it rolls over at 0xFFFF. Pre-scale
+ it by 32 also. Let it start running now.
+ */
+ timers[XTTCPSS_CLOCKSOURCE].base_addr = XTTCPSS_TIMER_BASE;
+
+ __raw_writel(0x0, timers[XTTCPSS_CLOCKSOURCE].base_addr +
+ XTTCPSS_IER_OFFSET);
+ __raw_writel(0x9, timers[XTTCPSS_CLOCKSOURCE].base_addr +
+ XTTCPSS_CLK_CNTRL_OFFSET);
+ __raw_writel(0x10, timers[XTTCPSS_CLOCKSOURCE].base_addr +
+ XTTCPSS_CNT_CNTRL_OFFSET);
+
+ /* Setup the clock event timer to be an interval timer which
+ * is prescaled by 32 using the interval interrupt. Leave it
+ * disabled for now.
+ */
+
+ timers[XTTCPSS_CLOCKEVENT].base_addr = XTTCPSS_TIMER_BASE + 4;
+
+ __raw_writel(0x23, timers[XTTCPSS_CLOCKEVENT].base_addr +
+ XTTCPSS_CNT_CNTRL_OFFSET);
+ __raw_writel(0x9, timers[XTTCPSS_CLOCKEVENT].base_addr +
+ XTTCPSS_CLK_CNTRL_OFFSET);
+ __raw_writel(0x1, timers[XTTCPSS_CLOCKEVENT].base_addr +
+ XTTCPSS_IER_OFFSET);
+
+ /* Setup IRQ the clock event timer */
+ event_timer_irq.dev_id = &timers[XTTCPSS_CLOCKEVENT];
+ setup_irq(XTTCPCC_EVENT_TIMER_IRQ, &event_timer_irq);
+}
+
+/**
+ * __raw_readl_cycles - Reads the timer counter register
+ *
+ * returns: Current timer counter register value
+ **/
+static cycle_t __raw_readl_cycles(struct clocksource *cs)
+{
+ struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKSOURCE];
+
+ return (cycle_t)__raw_readl(timer->base_addr +
+ XTTCPSS_COUNT_VAL_OFFSET);
+}
+
+
+/*
+ * Instantiate and initialize the clock source structure
+ */
+static struct clocksource clocksource_xttcpss = {
+ .name = "xttcpss_timer1",
+ .rating = 200, /* Reasonable clock source */
+ .read = __raw_readl_cycles,
+ .mask = CLOCKSOURCE_MASK(16),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+
+/**
+ * xttcpss_set_next_event - Sets the time interval for next event
+ *
+ * @cycles: Timer interval ticks
+ * @evt: Address of clock event instance
+ *
+ * returns: Always 0 - success
+ **/
+static int xttcpss_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKEVENT];
+
+ xttcpss_set_interval(timer, cycles);
+ return 0;
+}
+
+/**
+ * xttcpss_set_mode - Sets the mode of timer
+ *
+ * @mode: Mode to be set
+ * @evt: Address of clock event instance
+ **/
+static void xttcpss_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKEVENT];
+ u32 ctrl_reg;
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ xttcpss_set_interval(timer, TIMER_RATE / HZ);
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ ctrl_reg = __raw_readl(timer->base_addr +
+ XTTCPSS_CNT_CNTRL_OFFSET);
+ ctrl_reg |= XTTCPSS_CNT_CNTRL_DISABLE_MASK;
+ __raw_writel(ctrl_reg,
+ timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+ break;
+ case CLOCK_EVT_MODE_RESUME:
+ ctrl_reg = __raw_readl(timer->base_addr +
+ XTTCPSS_CNT_CNTRL_OFFSET);
+ ctrl_reg &= ~XTTCPSS_CNT_CNTRL_DISABLE_MASK;
+ __raw_writel(ctrl_reg,
+ timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+ break;
+ }
+}
+
+/*
+ * Instantiate and initialize the clock event structure
+ */
+static struct clock_event_device xttcpss_clockevent = {
+ .name = "xttcpss_timer2",
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .set_next_event = xttcpss_set_next_event,
+ .set_mode = xttcpss_set_mode,
+ .rating = 200,
+};
+
+/**
+ * xttcpss_timer_init - Initialize the timer
+ *
+ * Initializes the timer hardware and register the clock source and clock event
+ * timers with Linux kernal timer framework
+ **/
+static void __init xttcpss_timer_init(void)
+{
+ xttcpss_timer_hardware_init();
+ clocksource_register_hz(&clocksource_xttcpss, TIMER_RATE);
+
+ /* Calculate the parameters to allow the clockevent to operate using
+ integer math
+ */
+ clockevents_calc_mult_shift(&xttcpss_clockevent, TIMER_RATE, 4);
+
+ xttcpss_clockevent.max_delta_ns =
+ clockevent_delta2ns(0xfffe, &xttcpss_clockevent);
+ xttcpss_clockevent.min_delta_ns =
+ clockevent_delta2ns(1, &xttcpss_clockevent);
+
+ /* Indicate that clock event is on 1st CPU as SMP boot needs it */
+
+ xttcpss_clockevent.cpumask = cpumask_of(0);
+ clockevents_register_device(&xttcpss_clockevent);
+}
+
+/*
+ * Instantiate and initialize the system timer structure
+ */
+struct sys_timer xttcpss_sys_timer = {
+ .init = xttcpss_timer_init,
+};
diff --git a/include/linux/xilinx_ttc.h b/include/linux/xilinx_ttc.h
new file mode 100644
index 0000000..3606beb
--- /dev/null
+++ b/include/linux/xilinx_ttc.h
@@ -0,0 +1,24 @@
+/*
+ * This file contains common function prototypes to avoid externs
+ * in the c files.
+ *
+ * Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __XILINX_TTC_H__
+#define __XILINX_TTC_H__
+
+#include <asm/mach/time.h>
+
+extern struct sys_timer xttcpss_sys_timer;
+
+#endif
--
1.8.0
More information about the linux-arm-kernel
mailing list