OMAP baseline test results for v3.7-rc1

[Kevin Hilman]

Matt Porter <mporter at ti.com> writes:

> On Sat, Oct 20, 2012 at 06:58:10PM +0000, Paul Walmsley wrote:
>> On Sat, 20 Oct 2012, Richard Cochran wrote:
>> 
>> > On Sat, Oct 20, 2012 at 06:12:35PM +0000, Paul Walmsley wrote:
>> > > Just tried omap2plus_defconfig here and the board didn't boot, confirming 
>> > > your result.  Will add a section to the testlog README.txt about that.
>> > > 
>> > > > > In terms of differences from your setup, looks like we have different 
>> > > > > X-Loader and u-boot; it wouldn't surprise me if we have different kernel 
>> > > > > configs too.
>> > 
>> > I tried both omap2plus_defconfig and your am33xx_only config, and
>> > neither one work with my (recent) u-boot version.
>> 
>> Just sent you the MLO and u-boot.img from here via private E-mail.  Those 
>> were the files that came with the BeagleBone SD card here.
>> 
>> TI also has a u-boot tree for the AM33xx; might be worth trying:
>> 
>> git://arago-project.org/git/projects/u-boot-am33x.git
>
> Use of the vendor tree should be discouraged. The best thing to use
> is current ToT U-Boot mainline or the v2012.10 stable U-Boot release.
> X-Loader is deprecated by U-Boot SPL.

Just FYI for anyone else having an older BeagleBone.

On my Rev A2, using u-boot mainline, neither HEAD or v2012.10 result in
a working network interface, so you can't netboot/dhcp.

Kevin