[PATCH] ARM: dts: mxs: add the "clock-names" for gpmi-nand

[Shawn Guo]

Hi Arnd, Olof,

Can you please apply this fix for -rc?  Otherwise, please let me know
if you prefer to get a pull request from me.

Shawn

On Wed, Oct 10, 2012 at 06:27:09PM +0800, Huang Shijie wrote:
> The current DT nodes for mx23/mx28 miss the `clocks-names` item for gpmi-nand.
> So the gpmi-nand driver could not find the proper clock.
> 
> This patch fixes this issue.
> 
> Signed-off-by: Huang Shijie <b32955 at freescale.com>
> ---
>  arch/arm/boot/dts/imx23.dtsi |    1 +
>  arch/arm/boot/dts/imx28.dtsi |    1 +
>  2 files changed, 2 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
> index 9ca4ca7..6d31aa3 100644
> --- a/arch/arm/boot/dts/imx23.dtsi
> +++ b/arch/arm/boot/dts/imx23.dtsi
> @@ -69,6 +69,7 @@
>  				interrupts = <13>, <56>;
>  				interrupt-names = "gpmi-dma", "bch";
>  				clocks = <&clks 34>;
> +				clock-names = "gpmi_io";
>  				fsl,gpmi-dma-channel = <4>;
>  				status = "disabled";
>  			};
> diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
> index e16d631..55c57ea 100644
> --- a/arch/arm/boot/dts/imx28.dtsi
> +++ b/arch/arm/boot/dts/imx28.dtsi
> @@ -85,6 +85,7 @@
>  				interrupts = <88>, <41>;
>  				interrupt-names = "gpmi-dma", "bch";
>  				clocks = <&clks 50>;
> +				clock-names = "gpmi_io";
>  				fsl,gpmi-dma-channel = <4>;
>  				status = "disabled";
>  			};
> -- 
> 1.7.0.4
> 
>