[PATCH 4/4] ARM: kirkwood: DT board setup for Network Space Mini v2
Simon Guinot
simon.guinot at sequanux.org
Mon Oct 15 11:34:55 EDT 2012
This patch adds DT board setup for the LaCie NAS Network Space Mini v2
(aka SafeBox). The hardware characteristics are very close to those of
the Network Space Lite v2. The main difference are:
- A GPIO fan which is only available on the NS2 Mini.
- A single USB host port is wired on the NS2 Mini. The NS2 Lite provides
an additional dual-mode USB port (host/device).
Signed-off-by: Simon Guinot <simon.guinot at sequanux.org>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/kirkwood-ns2mini.dts | 49 ++++++++++++++++++++++++++++++++
arch/arm/mach-kirkwood/Kconfig | 8 ++++++
arch/arm/mach-kirkwood/Makefile | 1 +
arch/arm/mach-kirkwood/board-dt.c | 4 ++-
arch/arm/mach-kirkwood/board-ns2.c | 3 +-
arch/arm/mach-kirkwood/common.h | 3 +-
drivers/leds/Kconfig | 2 +-
8 files changed, 67 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/boot/dts/kirkwood-ns2mini.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 42b3e90..f2af858 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -41,6 +41,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
kirkwood-ns2.dtb \
kirkwood-ns2lite.dtb \
kirkwood-ns2max.dtb \
+ kirkwood-ns2mini.dtb \
kirkwood-ts219-6281.dtb \
kirkwood-ts219-6282.dtb
dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts
new file mode 100644
index 0000000..b58fd3d
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts
@@ -0,0 +1,49 @@
+/dts-v1/;
+
+/include/ "kirkwood-ns2-common.dtsi"
+
+/ {
+ model = "LaCie Network Space Mini v2";
+ compatible = "lacie,netspace_mini_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ ocp at f1000000 {
+ sata at 80000 {
+ status = "okay";
+ nr-ports = <1>;
+ };
+ };
+
+ gpio_fan {
+ compatible = "gpio-fan";
+ gpios = <&gpio0 22 1
+ &gpio0 7 1
+ &gpio1 1 1
+ &gpio0 23 1>;
+ gpio-fan,speed-map =
+ < 0 0
+ 3000 15
+ 3180 14
+ 4140 13
+ 4570 12
+ 6760 11
+ 7140 10
+ 7980 9
+ 9200 8>;
+ alarm-gpios = <&gpio0 25 1>;
+ };
+
+ ns2-leds {
+ compatible = "ns2-leds";
+
+ blue-sata {
+ label = "ns2:blue:sata";
+ slow-gpio = <&gpio0 29 0>;
+ cmd-gpio = <&gpio0 30 0>;
+ };
+ };
+};
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 83df331..757bdb3 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -158,6 +158,14 @@ config MACH_NETSPACE_LITE_V2_DT
Say 'Y' here if you want your kernel to support the LaCie
Network Space Lite v2 NAS, using Flattened Device Tree.
+config MACH_NETSPACE_MINI_V2_DT
+ bool "LaCie Network Space Mini v2 NAS (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ help
+ Say 'Y' here if you want your kernel to support the LaCie
+ Network Space Mini v2 NAS (aka SafeBox), using Flattened
+ Device Tree.
+
config MACH_TS219
bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
help
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 4d4b7d4..3ff4aa1 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -35,3 +35,4 @@ obj-$(CONFIG_MACH_INETSPACE_V2_DT) += board-ns2.o
obj-$(CONFIG_MACH_NETSPACE_V2_DT) += board-ns2.o
obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT) += board-ns2.o
obj-$(CONFIG_MACH_NETSPACE_LITE_V2_DT) += board-ns2.o
+obj-$(CONFIG_MACH_NETSPACE_MINI_V2_DT) += board-ns2.o
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index ab7595e..c3dd5d2 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -99,7 +99,8 @@ static void __init kirkwood_dt_init(void)
if (of_machine_is_compatible("lacie,inetspace_v2") ||
of_machine_is_compatible("lacie,netspace_v2") ||
of_machine_is_compatible("lacie,netspace_max_v2") ||
- of_machine_is_compatible("lacie,netspace_lite_v2"))
+ of_machine_is_compatible("lacie,netspace_lite_v2") ||
+ of_machine_is_compatible("lacie,netspace_mini_v2"))
ns2_init();
of_platform_populate(NULL, kirkwood_dt_match_table,
@@ -122,6 +123,7 @@ static const char *kirkwood_dt_board_compat[] = {
"lacie,netspace_max_v2",
"lacie,netspace_v2",
"lacie,netspace_lite_v2",
+ "lacie,netspace_mini_v2",
NULL
};
diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c
index da8c4c5..78596c4 100644
--- a/arch/arm/mach-kirkwood/board-ns2.c
+++ b/arch/arm/mach-kirkwood/board-ns2.c
@@ -74,7 +74,8 @@ void __init ns2_init(void)
kirkwood_mpp_conf(ns2_mpp_config);
kirkwood_ehci_init();
- if (of_machine_is_compatible("lacie,netspace_lite_v2"))
+ if (of_machine_is_compatible("lacie,netspace_lite_v2") ||
+ of_machine_is_compatible("lacie,netspace_mini_v2"))
ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
kirkwood_ge00_init(&ns2_ge00_data);
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 6949d81..95eb69b 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -115,7 +115,8 @@ static inline void km_kirkwood_init(void) {};
#if defined(CONFIG_MACH_INETSPACE_V2_DT) || \
defined(CONFIG_MACH_NETSPACE_V2_DT) || \
defined(CONFIG_MACH_NETSPACE_MAX_V2_DT) || \
- defined(CONFIG_MACH_NETSPACE_LITE_V2_DT)
+ defined(CONFIG_MACH_NETSPACE_LITE_V2_DT) || \
+ defined(CONFIG_MACH_NETSPACE_MINI_V2_DT)
void ns2_init(void);
#else
static inline void ns2_init(void) {};
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index e455c08..b58bc8a 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -381,7 +381,7 @@ config LEDS_NS2
depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || \
MACH_NETSPACE_MAX_V2 || MACH_D2NET_V2 || \
MACH_NETSPACE_V2_DT || MACH_INETSPACE_V2_DT || \
- MACH_NETSPACE_MAX_V2_DT
+ MACH_NETSPACE_MAX_V2_DT || MACH_NETSPACE_MINI_V2_DT
default y
help
This option enable support for the dual-GPIO LED found on the
--
1.7.10
More information about the linux-arm-kernel
mailing list