OMAP baseline test results for v3.7-rc1
richardcochran at gmail.com
Sat Oct 20 14:01:24 EDT 2012
On Sat, Oct 20, 2012 at 04:27:19PM +0000, Paul Walmsley wrote:
> > BeagleBone Rev. A6 does not boot v3.7-rc1, at least not for me.
> > I recently posted the missing patches needed to make it work (but the
> > patches are not by me).
> Those are the patches at:
Yes, that is right. Only the first patch is absoutely required for booting.
> Thanks for the report. Are you using the stock v3.7-rc1 DTS file in
> arch/arm/boot/dts/am335x-bone.dts ?
> Also are you using omap2plus_defconfig?
Yes, but I de-selected a few items. I will try it again without
> Here's the console log from the boot test here:
> And here's the kernel config and uImage+DTB from the boot test here:
Okay, so there are a number of differences between your am33xx_only
and the omap2plus_defconfig. I will try it with your config as well.
> In terms of differences from your setup, looks like we have different
> X-Loader and u-boot; it wouldn't surprise me if we have different kernel
> configs too.
What is X-Loader?
More information about the linux-arm-kernel