[PATCH 2/3] PWM: vt8500: Update vt8500 PWM driver support

[Tony Prisk]

On Mon, 2012-10-22 at 10:04 +0200, Thierry Reding wrote:
> On Mon, Oct 22, 2012 at 08:36:22PM +1300, Tony Prisk wrote:
> > On Mon, 2012-10-22 at 09:24 +0200, Thierry Reding wrote:
> > > On Mon, Oct 22, 2012 at 08:09:07PM +1300, Tony Prisk wrote:
> > > > On Mon, 2012-10-22 at 19:51 +1300, Tony Prisk wrote:
> > > > > > 
> > > > > > >  	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
> > > > > > >  	if (chip == NULL) {
> > > > > > >  		dev_err(&pdev->dev, "failed to allocate memory\n");
> > > > > > > @@ -123,26 +144,32 @@ static int __devinit pwm_probe(struct platform_device *pdev)
> > > > > > >  	chip->chip.ops = &vt8500_pwm_ops;
> > > > > > >  	chip->chip.base = -1;
> > > > > > >  	chip->chip.npwm = VT8500_NR_PWMS;
> > > > > > > +	chip->clk = of_clk_get(np, 0);
> > > > > > 
> > > > > > I thought this was supposed to work transparently across OF and !OF
> > > > > > configurations by using just clk_get() or devm_clk_get()? I guess that
> > > > > > if the driver depends on OF, then this would be moot, but we should
> > > > > > probably stick to the standard usage anyway.
> > > > > > 
> > > > > > Furthermore, of_clk_get() doesn't seem to be managed, so you'd need to
> > > > > > add explicit clk_put() in the error cleanup paths. One more argument in
> > > > > > favour of using devm_clk_get() instead.
> > > > > 
> > > > > Hmm good point. I stuck with of_ functions because its an OF only driver
> > > > > and it seemed 'backward' to mix old code with new. It does pose the
> > > > > question of 'why have of_clk_get() if existing functions work better'.
> > > > 
> > > > Was about to fix this but noticed why it wasn't like this to start
> > > > with :)
> > > > 
> > > > struct clk *devm_clk_get(struct device *dev, const char *id);
> > > > struct clk *of_clk_get(struct device_node *np, int index);
> > > > 
> > > > devm_clk_get requires me to 'get' the clock by name. arch-vt8500 (and I
> > > > believe a lot of other arch's) don't enforce names for clocks defined in
> > > > devicetree, therefore there is no way for me to know what name the clk
> > > > has unless I include in the binding that the clock must be named 'xxx'.
> > > 
> > > I thought clk_get() was supposed to return the first clock specified in
> > > DT if you pass NULL as the consumer name. I haven't tested this though.
> > > And I haven't looked at the code.
> > > 
> > > > of_clk_get retrieves it by the dt-node + index, so it doesn't care as
> > > > long as its the 1st clock listed.
> > > 
> > > So the usual way to do this, I believe, is:
> > > 
> > > 	clocks = <&clk_foo>;
> > > 	clock-names = "foo";
> > > 
> > > Then use:
> > > 
> > > 	clk = devm_clk_get(&pdev->dev, "foo");
> > > 
> > > And as I said above, I was under the impression that the default would
> > > be to use the first clock if NULL was specified instead of "foo".
> > > 
> > > Thierry
> > 
> > clock-names is an optional property (as defined in
> > bindings/clock/clock-bindings.txt) so relying on it is .. well,
> > unreliable.
> > 
> > What you say makes sense, but it means the binding document has to make
> > an optional property into a required property simply to use an 'old'
> > function when a new function would 'work' (granted not as well, as you
> > pointed out) without requiring the optional property.
> 
> Okay, I've just checked the core clock code, and indeed if you run
> clk_get() with con_id set to NULL, you'll eventually call of_clk_get()
> with index == 0. That's exactly what you want, right? The only setup
> where this won't work out is if you need to handle multiple clocks, in
> which case I think it would make sense to make the clock-names property
> mandatory. But for this driver that won't be necessary, since it will
> never use a second clock, right?
> 
> > Your subsystem - your rules. Let me know if I've managed to sway you or
> > not :)
> 
> I'd rather persuade you than force the issue. =)
> 
> Thierry

Further to the discussion, my preference is still for of_clk_get()
(although I've changed the patch anyway as you saw because it makes no
difference in this case) :)

clk_get(x, NULL) and devm_clk_get(x, NULL) both seems like 'hacks' to
allow platforms to convert to DT without having to update all their
drivers first. It only allows the first (default) clock, as your pointed
out. Getting a 2nd... clock relies on an optional property in DT (which
again, seems like it is there to support 'old' drivers) which allows you
to request clocks by name.

of_clk_get() on the other hand seems like a properly native DT function.
You don't need to know anything about the clock, as long as the correct
clock is specified in the correct order as documented by the binding.
Relying on 'pre-OF' code for a OF-only driver also seems
counter-intuitive.

Granted of_clk_get() doesn't provide the 'garbage-collection' of
devm_get_clk() but I think that is just an arguement to needing
of_devm_clk_get().

Just my two cents.

Regards
Tony P