[PATCH v4 RESEND 1/3] Input: egalax_ts: get gpio from devicetree

[Hui Wang]

Shawn Guo wrote:
> Add LAKML ...
>
> On Wed, Oct 10, 2012 at 09:30:36AM -0700, Dmitry Torokhov wrote:
>   
>> Hi Hui,
>>
>> On Wed, Oct 10, 2012 at 05:12:01PM +0800, Hui Wang wrote:
>>     
>>> The irq_to_gpio() is old, most platforms use GENERIC_GPIO framework
>>> and don't support this API anymore.
>>>
>>> The i.MX6q sabrelite platform equips an egalax touchscreen controller,
>>> and this platform already transfered to GENERIC_GPIO framework, to
>>> support this driver, we use a more generic way to get gpio.
>>>       
>> Unfortunately this does break the driver for platforms that do still
>> support irq_to_gpio and have not transitioned to device tree (yet?).
>> It looks like the API suffered from premature deletion...
>>
>> I really do not want to add a new platform data structure with only gpio
>> in it, is there a better way to detect if irq_to_gpio() (even if only a
>> stub) is available?
>>
>>     
> If CONFIG_ARCH_HAVE_CUSTOM_GPIO_H is not enabled for an architecture,
> the irq_to_gpio() in include/linux/gpio.h will tell unavailability by
> returning -EINVAL.  But ARM
>   
So far, the only way i can figure out is to add following in the 
arch/arm/include/asm/gpio.h

static inline int arm_irq_to_gpio(unsigned int irq)
{
return -EINVAL;
}

#ifndef irq_to_gpio
#define irq_to_gpio arm_irq_to_gpio
#endif

And remove all irq_to_gpio() function definitions in the arch/arm/, if 
mach want a specific irq_to_gpio, they can use macro to define their own.

Regards,
Hui.