[PATCH 2/7] ARM: ux500: Add SDI (MMC) support to the HREF Device Tree

[Lee Jones]

Here we add the Device Tree nodes which are required to successfully
probe the MMCI driver which will enable the four cards available on
ST-Ericsson's HREF hardware development platform.

Acked-by: Linus Walleij <linus.walleij at linaro.org>
Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
 arch/arm/boot/dts/hrefv60plus.dts  |   44 ++++++++++++++++++++++++++++++++++++
 arch/arm/mach-ux500/board-mop500.c |    1 -
 2 files changed, 44 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts
index e2213204..3fd83c6 100644
--- a/arch/arm/boot/dts/hrefv60plus.dts
+++ b/arch/arm/boot/dts/hrefv60plus.dts
@@ -77,6 +77,50 @@
 			};
 		};
 
+		// External Micro SD slot
+		sdi0_per1 at 80126000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+			mmc-cap-sd-highspeed;
+			mmc-cap-mmc-highspeed;
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+
+			cd-gpios  = <&tc3589x_gpio 3 0x4>;
+
+			status = "okay";
+		};
+
+		// WLAN SDIO channel
+		sdi1_per2 at 80118000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+
+			status = "okay";
+		};
+
+		// PoP:ed eMMC
+		sdi2_per3 at 80005000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <8>;
+			mmc-cap-mmc-highspeed;
+
+			status = "okay";
+		};
+
+		// On-board eMMC
+		sdi4_per2 at 80114000 {
+			arm,primecell-periphid = <0x10480180>;
+		        max-frequency = <50000000>;
+			bus-width = <8>;
+			mmc-cap-mmc-highspeed;
+			vmmc-supply = <&ab8500_ldo_aux2_reg>;
+
+			status = "okay";
+		};
+
 		sound {
 			compatible = "stericsson,snd-soc-mop500";
 
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 4eedf1c..38e53b2 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -818,7 +818,6 @@ static void __init u8500_init_machine(void)
 		platform_add_devices(mop500_platform_devs,
 				ARRAY_SIZE(mop500_platform_devs));
 
-		mop500_sdi_init(parent);
 		mop500_audio_init(parent);
 		i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 		i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
-- 
1.7.9.5