[PATCH] arm: dts: omap4-sdp: pinmux configuration for keypad

[Tony Lindgren]

* Sourav Poddar <sourav.poddar at ti.com> [121022 00:30]:
> --- a/arch/arm/boot/dts/omap4-sdp.dts
> +++ b/arch/arm/boot/dts/omap4-sdp.dts
> @@ -194,6 +194,27 @@
>  			0xbc 0x100	/* abe_mcbsp2_fsx.abe_mcbsp2_fsx INPUT | MODE0 */
>  		>;
>  	};
> +
> +	keypad_pins: pinmux_keypad_pins {
> +		pinctrl-single,pins = <
> +			0x24 0x4119   /* gpmc_a18.kpd_row6 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
> +			0x26 0x4119   /* gpmc_a19.kpd_row6 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
> +			0x2c 0x4001   /* gpmc_a22.kpd_col6 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
> +			0x2e 0x4001   /* gpmc_a23.kpd_col7 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
> +			0x13c 0x4001  /* kpd_col0.kpd_col0 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
> +			0x13e 0x4001  /* kpd_col1.kpd_col1 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
> +			0x140 0x4001  /* kpd_col2.kpd_col2 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
> +			0x142 0x10F   /* kpd_col3.kpd_col3 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
> +			0x144 0x4001  /* kpd_col4.kpd_col4 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
> +			0x146 0x4001  /* kpd_col5.kpd_col5 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
> +			0x148 0xc119  /* kpd_row0.kpd_row0 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
> +			0x14a 0x4119  /* kpd_row1.kpd_row1 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
> +			0x14c 0x4119  /* kpd_row2.kpd_row2 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
> +			0x14e 0x4119  /* kpd_row3.kpd_row3 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
> +			0x150 0x4119  /* kpd_row4.kpd_row4 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
> +			0x152 0x4119  /* kpd_row5.kpd_row5 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
> +		>;
> +	};
>  };

Please shorten these to leave out OMAP_:

		pinctrl-single,pins = <
			0x24 0x4119   /* gpmc_a18.kpd_row6 PULL_ENA | PULL_UP | WAKEUP_EN | MUX_MODE1 | INPUT_EN */
			0x26 0x4119   /* gpmc_a19.kpd_row6 PULL_ENA | PULL_UP | WAKEUP_EN | MUX_MODE1 | INPUT_EN */
			...

When we convert them over to use the preprocessor, we can still
easily replace them.

Regards,

Tony