[PATCH 09/15] pinctrl: samsung: Include bank-specific eint offset in bank struct
Tomasz Figa
t.figa at samsung.com
Thu Oct 11 04:11:15 EDT 2012
Some SoCs, like Exynos4x12, have non-sequential layout of EINT control
registers and so current way of calculating register addresses does not
work correctly for them.
This patch adds eint_offset field to samsung_pin_bank struct and
modifies the driver to use it instead of calculating the offsets from
bank index.
Signed-off-by: Tomasz Figa <t.figa at samsung.com>
---
drivers/pinctrl/pinctrl-exynos.c | 55 +++++++++++++++++++--------------------
drivers/pinctrl/pinctrl-exynos.h | 3 ++-
drivers/pinctrl/pinctrl-samsung.h | 1 +
3 files changed, 30 insertions(+), 29 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c
index 0ea2164..bd9f130 100644
--- a/drivers/pinctrl/pinctrl-exynos.c
+++ b/drivers/pinctrl/pinctrl-exynos.c
@@ -146,7 +146,7 @@ static struct exynos_geint_data *exynos_get_eint_data(irq_hw_number_t hw,
struct samsung_pin_bank *bank = d->ctrl->pin_banks;
struct exynos_geint_data *eint_data;
unsigned int nr_banks = d->ctrl->nr_banks, idx;
- unsigned int irq_base = 0, eint_offset = 0;
+ unsigned int irq_base = 0;
if (hw >= d->ctrl->nr_gint) {
dev_err(d->dev, "unsupported ext-gpio interrupt\n");
@@ -159,7 +159,6 @@ static struct exynos_geint_data *exynos_get_eint_data(irq_hw_number_t hw,
if ((hw >= irq_base) && (hw < (irq_base + bank->nr_pins)))
break;
irq_base += bank->nr_pins;
- eint_offset += 4;
}
if (idx == nr_banks) {
@@ -175,7 +174,7 @@ static struct exynos_geint_data *exynos_get_eint_data(irq_hw_number_t hw,
eint_data->bank = bank;
eint_data->pin = hw - irq_base;
- eint_data->eint_offset = eint_offset;
+ eint_data->eint_offset = bank->eint_offset;
return eint_data;
}
@@ -484,35 +483,35 @@ static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d)
/* pin banks of exynos4210 pin-controller 0 */
static struct samsung_pin_bank exynos4210_pin_banks0[] = {
- EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0"),
- EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1"),
- EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb"),
- EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpc0"),
- EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpc1"),
- EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpd0"),
- EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpd1"),
- EXYNOS_PIN_BANK_EINTG(5, 0x0E0, "gpe0"),
- EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpe1"),
- EXYNOS_PIN_BANK_EINTG(6, 0x120, "gpe2"),
- EXYNOS_PIN_BANK_EINTG(8, 0x140, "gpe3"),
- EXYNOS_PIN_BANK_EINTG(8, 0x160, "gpe4"),
- EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpf0"),
- EXYNOS_PIN_BANK_EINTG(8, 0x1A0, "gpf1"),
- EXYNOS_PIN_BANK_EINTG(8, 0x1C0, "gpf2"),
- EXYNOS_PIN_BANK_EINTG(6, 0x1E0, "gpf3"),
+ EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
+ EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04),
+ EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb", 0x08),
+ EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpc0", 0x0c),
+ EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpc1", 0x10),
+ EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpd0", 0x14),
+ EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpd1", 0x18),
+ EXYNOS_PIN_BANK_EINTG(5, 0x0E0, "gpe0", 0x1c),
+ EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpe1", 0x20),
+ EXYNOS_PIN_BANK_EINTG(6, 0x120, "gpe2", 0x24),
+ EXYNOS_PIN_BANK_EINTG(8, 0x140, "gpe3", 0x28),
+ EXYNOS_PIN_BANK_EINTG(8, 0x160, "gpe4", 0x2c),
+ EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpf0", 0x30),
+ EXYNOS_PIN_BANK_EINTG(8, 0x1A0, "gpf1", 0x34),
+ EXYNOS_PIN_BANK_EINTG(8, 0x1C0, "gpf2", 0x38),
+ EXYNOS_PIN_BANK_EINTG(6, 0x1E0, "gpf3", 0x3c),
};
/* pin banks of exynos4210 pin-controller 1 */
static struct samsung_pin_bank exynos4210_pin_banks1[] = {
- EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpj0"),
- EXYNOS_PIN_BANK_EINTG(5, 0x020, "gpj1"),
- EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpk0"),
- EXYNOS_PIN_BANK_EINTG(7, 0x060, "gpk1"),
- EXYNOS_PIN_BANK_EINTG(7, 0x080, "gpk2"),
- EXYNOS_PIN_BANK_EINTG(7, 0x0A0, "gpk3"),
- EXYNOS_PIN_BANK_EINTG(8, 0x0C0, "gpl0"),
- EXYNOS_PIN_BANK_EINTG(3, 0x0E0, "gpl1"),
- EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpl2"),
+ EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpj0", 0x00),
+ EXYNOS_PIN_BANK_EINTG(5, 0x020, "gpj1", 0x04),
+ EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpk0", 0x08),
+ EXYNOS_PIN_BANK_EINTG(7, 0x060, "gpk1", 0x0c),
+ EXYNOS_PIN_BANK_EINTG(7, 0x080, "gpk2", 0x10),
+ EXYNOS_PIN_BANK_EINTG(7, 0x0A0, "gpk3", 0x14),
+ EXYNOS_PIN_BANK_EINTG(8, 0x0C0, "gpl0", 0x18),
+ EXYNOS_PIN_BANK_EINTG(3, 0x0E0, "gpl1", 0x1c),
+ EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpl2", 0x20),
EXYNOS_PIN_BANK_EINTN(6, 0x120, "gpy0"),
EXYNOS_PIN_BANK_EINTN(4, 0x140, "gpy1"),
EXYNOS_PIN_BANK_EINTN(6, 0x160, "gpy2"),
diff --git a/drivers/pinctrl/pinctrl-exynos.h b/drivers/pinctrl/pinctrl-exynos.h
index 2de4a29..5d8e380 100644
--- a/drivers/pinctrl/pinctrl-exynos.h
+++ b/drivers/pinctrl/pinctrl-exynos.h
@@ -59,7 +59,7 @@
.name = id \
}
-#define EXYNOS_PIN_BANK_EINTG(pins, reg, id) \
+#define EXYNOS_PIN_BANK_EINTG(pins, reg, id, offs) \
{ \
.pctl_offset = reg, \
.nr_pins = pins, \
@@ -69,6 +69,7 @@
.conpdn_width = 2, \
.pudpdn_width = 2, \
.eint_type = EINT_TYPE_GPIO, \
+ .eint_offset = offs, \
.name = id \
}
diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h
index ea5dadd..d77d9bc 100644
--- a/drivers/pinctrl/pinctrl-samsung.h
+++ b/drivers/pinctrl/pinctrl-samsung.h
@@ -124,6 +124,7 @@ struct samsung_pin_bank {
u8 conpdn_width;
u8 pudpdn_width;
enum eint_type eint_type;
+ u32 eint_offset;
u32 irq_base;
char *name;
struct device_node *of_node;
--
1.7.12
More information about the linux-arm-kernel
mailing list