[PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver

[Florian Fainelli]

Le dimanche 21 octobre 2012 00:10:32, Tony Prisk a écrit :
> Add a binding document for ehci-platform driver.
> 
> Signed-off-by: Tony Prisk <linux at prisktech.co.nz>
> ---
>  .../devicetree/bindings/usb/ehci-platform.txt      |   27
> ++++++++++++++++++++ 1 file changed, 27 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/ehci-platform.txt
> 
> diff --git a/Documentation/devicetree/bindings/usb/ehci-platform.txt
> b/Documentation/devicetree/bindings/usb/ehci-platform.txt new file mode
> 100644
> index 0000000..930b19e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/ehci-platform.txt
> @@ -0,0 +1,27 @@
> +Generic Platform EHCI Controller
> +-----------------------------------------------------
> +
> +Required properties:
> +- compatible : "linux,ehci-platform"

Here you changed to linux,ehci-platform, which is good, but in the example you 
forgot to update it.

Otherwise, this is ok with me.

> +- reg : Should contain 1 register ranges(address and length)
> +- interrupts : EHCI controller interrupt
> +
> +Optional properties:
> +- caps-offset : offset to the capabilities register (default = 0)
> +- has-tt : controller has transaction translator(s).
> +- has-synopsys-hc-bug : controller has the synopsys hc bug
> +- no-io-watchdog : controller does not need io watchdog
> +
> +- big-endian : descriptors and registers are both big endian. This
> +  is the equivalent of specifying big-endian-desc and big-endian-regs.
> +OR
> +- big-endian-desc : descriptors are in big-endian format
> +- big-endian-regs : mmio is in big-endian format
> +
> +Example:
> +	ehci at d8007c00 {
> +		compatible = "ehci-platform";
> +		reg = <0xd8007c00 0x200>;
> +		interrupts = <43>;
> +		has-tt;
> +	};

-- 
Florian