[PATCH] i2c: omap: re-factor omap_i2c_init function
Shubhrajyoti Datta
omaplinuxkernel at gmail.com
Tue Oct 23 13:56:15 EDT 2012
On Tue, Oct 23, 2012 at 10:48 PM, Felipe Balbi <balbi at ti.com> wrote:
> Hi,
>
> On Tue, Oct 23, 2012 at 08:57:19PM +0530, Shubhrajyoti D wrote:
>> re-factor omap_i2c_init() so that we can re-use it for resume.
>> While at it also remove the bufstate variable as we write it
>> in omap_i2c_resize_fifo for every transfer.
>>
>> Signed-off-by: Shubhrajyoti D <shubhrajyoti at ti.com>
>> ---
>> Applies on Felipe's series
>> http://www.spinics.net/lists/linux-omap/msg79995.html
>>
>> Tested with Terro sys fix + Felipe's stop sched_clock() during suspend
>> on omap3636 beagle both idle and suspend.
>>
>> Functional testing on omap4sdp.
>>
>> drivers/i2c/busses/i2c-omap.c | 68 +++++++++++++++++------------------------
>> 1 files changed, 28 insertions(+), 40 deletions(-)
>>
>> diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
>> index 5e5cefb..338cee7 100644
>> --- a/drivers/i2c/busses/i2c-omap.c
>> +++ b/drivers/i2c/busses/i2c-omap.c
>> @@ -209,7 +209,6 @@ struct omap_i2c_dev {
>> u16 pscstate;
>> u16 scllstate;
>> u16 sclhstate;
>> - u16 bufstate;
>> u16 syscstate;
>> u16 westate;
>> u16 errata;
>> @@ -285,9 +284,26 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
>> }
>> }
>>
>> +static void __omap_i2c_init(struct omap_i2c_dev *dev)
>> +{
>> +
>> + omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
>> + /* Setup clock prescaler to obtain approx 12MHz I2C module clock: */
>> + omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, dev->pscstate);
>> +
>> + /* SCL low and high time values */
>> + omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, dev->scllstate);
>> + omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, dev->sclhstate);
>> + if (dev->rev >= OMAP_I2C_REV_ON_3430_3530)
>> + omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, dev->westate);
>> + /* Take the I2C module out of reset: */
>> + omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
>> + omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
>> +
>> +}
>> static int omap_i2c_init(struct omap_i2c_dev *dev)
>> {
>> - u16 psc = 0, scll = 0, sclh = 0, buf = 0;
>> + u16 psc = 0, scll = 0, sclh = 0;
>> u16 fsscll = 0, fssclh = 0, hsscll = 0, hssclh = 0;
>> unsigned long fclk_rate = 12000000;
>> unsigned long timeout;
>> @@ -337,11 +353,8 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
>> * REVISIT: Some wkup sources might not be needed.
>> */
>> dev->westate = OMAP_I2C_WE_ALL;
>> - omap_i2c_write_reg(dev, OMAP_I2C_WE_REG,
>> - dev->westate);
>> }
>> }
>> - omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
>>
>> if (dev->flags & OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK) {
>> /*
>> @@ -426,28 +439,18 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
>> sclh = fclk_rate / (dev->speed * 2) - 7 + psc;
>> }
>>
>> - /* Setup clock prescaler to obtain approx 12MHz I2C module clock: */
>> - omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, psc);
>> -
>> - /* SCL low and high time values */
>> - omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, scll);
>> - omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, sclh);
>> -
>> - /* Take the I2C module out of reset: */
>> - omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
>> -
>> /* Enable interrupts */
>> dev->iestate = (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
>> OMAP_I2C_IE_NACK | OMAP_I2C_IE_AL) |
>> ((dev->fifo_size) ? (OMAP_I2C_IE_RDR |
>> OMAP_I2C_IE_XDR) : 0);
>> - omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
>> - if (dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
>> - dev->pscstate = psc;
>> - dev->scllstate = scll;
>> - dev->sclhstate = sclh;
>> - dev->bufstate = buf;
>> - }
>> +
>> + dev->pscstate = psc;
>> + dev->scllstate = scll;
>> + dev->sclhstate = sclh;
>> +
>> + __omap_i2c_init(dev);
>> +
>> return 0;
>> }
>>
>> @@ -1136,7 +1139,7 @@ omap_i2c_probe(struct platform_device *pdev)
>> if (IS_ERR_VALUE(r))
>> goto err_free_mem;
>>
>> - dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
>> + dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
>
> trailing change. not part of $SUBJECT
my mistake will remove.
>
>> dev->errata = 0;
>>
>> @@ -1268,23 +1271,8 @@ static int omap_i2c_runtime_resume(struct device *dev)
>> {
>> struct omap_i2c_dev *_dev = dev_get_drvdata(dev);
>>
>> - if (_dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
>> - omap_i2c_write_reg(_dev, OMAP_I2C_CON_REG, 0);
>> - omap_i2c_write_reg(_dev, OMAP_I2C_PSC_REG, _dev->pscstate);
>> - omap_i2c_write_reg(_dev, OMAP_I2C_SCLL_REG, _dev->scllstate);
>> - omap_i2c_write_reg(_dev, OMAP_I2C_SCLH_REG, _dev->sclhstate);
>> - omap_i2c_write_reg(_dev, OMAP_I2C_BUF_REG, _dev->bufstate);
>> - omap_i2c_write_reg(_dev, OMAP_I2C_SYSC_REG, _dev->syscstate);
>> - omap_i2c_write_reg(_dev, OMAP_I2C_WE_REG, _dev->westate);
>> - omap_i2c_write_reg(_dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
>> - }
>> -
>> - /*
>> - * Don't write to this register if the IE state is 0 as it can
>> - * cause deadlock.
>> - */
>> - if (_dev->iestate)
>> - omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, _dev->iestate);
>
> this part is not on __omap_i2c_init() so you're potentially causing a
> regression here.
iestate is set at init so cannot be zero. so the check was removed.
>
>> + if (_dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE)
>> + __omap_i2c_init(_dev);
>
> how has this been tested ? Did you validate suspend to ram and runtime
> pm ?
yes.
beagleXm hitting off on idle and suspend path.
and omap4sdp didnt hit off just suspend to ram.
>
>> return 0;
>> }
>> --
>> 1.7.5.4
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
>> the body of a message to majordomo at vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
> --
> balbi
More information about the linux-arm-kernel
mailing list