[PATCH v3] gpio/omap: fix off-mode bug: clear debounce clock enable mask on free/reset

Santosh Shilimkar santosh.shilimkar at ti.com
Fri Oct 26 02:01:34 EDT 2012


On Friday 26 October 2012 04:22 AM, Jon Hunter wrote:
> Hi Kevin,
> On 10/25/2012 11:34 AM, Kevin Hilman wrote:
>> From: Kevin Hilman <khilman at ti.com>


>> diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
>> index 94cbc84..ce1da19 100644
>> --- a/drivers/gpio/gpio-omap.c
>> +++ b/drivers/gpio/gpio-omap.c
>> @@ -539,6 +539,8 @@ static void _reset_gpio(struct gpio_bank *bank, int gpio)
>>   	_set_gpio_irqenable(bank, gpio, 0);
>>   	_clear_gpio_irqstatus(bank, gpio);
>>   	_set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), IRQ_TYPE_NONE);
>> +	bank->dbck_enable_mask &= ~(GPIO_BIT(bank, gpio));
>> +	_gpio_dbck_disable(bank);
> We can't use _gpio_dbck_disable() here. This has been specifically implemented
> for the suspend path and is designed to disable the debounce clock while
> debounce is enabled (which makes sense). Yes this needs to be cleaned up.
I thought this bit was clear on v2 discussion list that debounce
clock disable needs to be conditional based on debounce mask.

>  From 33812f3bd4f7aab1154e7194b7f11fba700a5086 Mon Sep 17 00:00:00 2001
> From: Jon Hunter <jon-hunter at ti.com>
> Date: Thu, 25 Oct 2012 16:00:51 -0500
> Subject: [PATCH] gpio/omap: fix clearing of debounce settings on gpio
>   free/reset
> When a GPIO is freed or shutdown, we need to ensure that any debounce settings
> are cleared and if the GPIO is the only GPIO in the bank that is currently
> using debounce, then disable the debounce clock as well to save power.
> Therefore, introduce a new function called _clear_gpio_debounce() to clear
> any debounce settings when the GPIO is freed or shutdown.
> Please note that we cannot use _gpio_dbck_disable() to disable the debounce
> clock because this has been specifically created for the gpio suspend path
> and is intended to shutdown the debounce clock while debounce is enabled.
> This has been unit tested on an OMAP3430 Beagle board, by requesting a gpio,
> enabling debounce and then freeing the gpio and checking the register contents,
> the saved register context and the debounce clock state.
> Signed-off-by: Jon Hunter <jon-hunter at ti.com>
> ---
Now that we are aligned, so we can take this patch forward. Feel free
to add my ack in case you plan to refresh it.

Acked-by: Santosh Shilimkar <santosh.shilimkar at ti.com>

More information about the linux-arm-kernel mailing list