[PATCH v3] ARM: dts: AM33xx: Add SPI node
Philip, Avinash
avinashphilip at ti.com
Wed Oct 31 06:51:09 EDT 2012
Add McSPI data node to AM33XX device tree file. The McSPI module (and so
as the driver) is reused from OMAP4.
Signed-off-by: Philip, Avinash <avinashphilip at ti.com>
Tested-by: Matt Porter <mporter at ti.com>
---
Changes since v2:
- Commit message corrected.
- Rebase on top of for_3.8/dts
Changes since v1:
- Corrected reg offset in reg DT entry.
:100644 100644 97a7bd3... 6e04789... M arch/arm/boot/dts/am33xx.dtsi
arch/arm/boot/dts/am33xx.dtsi | 24 ++++++++++++++++++++++++
1 files changed, 24 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 97a7bd3..6e04789 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -299,5 +299,29 @@
76>;
ti,hwmods = "rtc";
};
+
+ spi0: spi at 48030000 {
+ compatible = "ti,omap4-mcspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x48030000 0x400>;
+ interrupt-parent = <&intc>;
+ interrupt = <65>;
+ ti,spi-num-cs = <2>;
+ ti,hwmods = "spi0";
+ status = "disabled";
+ };
+
+ spi1: spi at 481a0000 {
+ compatible = "ti,omap4-mcspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x481a0000 0x400>;
+ interrupt-parent = <&intc>;
+ interrupt = <125>;
+ ti,spi-num-cs = <2>;
+ ti,hwmods = "spi1";
+ status = "disabled";
+ };
};
};
--
1.7.0.4
More information about the linux-arm-kernel
mailing list