[PATCH 1/2] ARM: dts: OMAP: Add counter-32k nodes
Benoit Cousson
b-cousson at ti.com
Thu Oct 18 10:23:29 EDT 2012
Hi Jon,
This looks good to me, I just have a minor nit comment.
On 10/17/2012 08:33 PM, Jon Hunter wrote:
> Adds the counter-32k timers nodes present in OMAP2/3/4 devices and
> device-tree binding documentation for OMAP counter-32k.
>
> Signed-off-by: Jon Hunter <jon-hunter at ti.com>
> ---
> .../devicetree/bindings/arm/omap/counter32k.txt | 15 +++++++++++++++
> arch/arm/boot/dts/omap2420.dtsi | 6 ++++++
> arch/arm/boot/dts/omap2430.dtsi | 6 ++++++
> arch/arm/boot/dts/omap3.dtsi | 6 ++++++
> arch/arm/boot/dts/omap4.dtsi | 6 ++++++
> 5 files changed, 39 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/omap/counter32k.txt
>
> diff --git a/Documentation/devicetree/bindings/arm/omap/counter32k.txt b/Documentation/devicetree/bindings/arm/omap/counter32k.txt
> new file mode 100644
> index 0000000..1983fae
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/omap/counter32k.txt
> @@ -0,0 +1,15 @@
> +OMAP Counter-32K bindings
> +
> +Required properties:
> +- compatible: Must be "ti,omap-counter32k" for OMAP controllers
> +- reg: Contains timer register address range (base address and length)
> +- ti,hwmods: Name of the hwmod associated to the counter, which is typically
> + "counter_32k"
> +
> +Example:
> +
> +counter32k: counter32k at 4a304000 {
> + compatible = "ti,omap-counter32k";
> + reg = <0x4a304000 0x001f>;
> + ti,hwmods = "counter_32k";
> +};
> diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
> index 5f68a70..082193f 100644
> --- a/arch/arm/boot/dts/omap2420.dtsi
> +++ b/arch/arm/boot/dts/omap2420.dtsi
> @@ -14,6 +14,12 @@
> compatible = "ti,omap2420", "ti,omap2";
>
> ocp {
> + counter32k: counter32k at 48004000 {
I'd rather use "counter" as generic type to be consistent with the timer
type we are already using.
+ counter32k: counter at 48004000 {
Regards,
Benoit
More information about the linux-arm-kernel
mailing list