[PATCH 3/6] Serial: AT91: Request tx dma channel
Elen Song
elen.song at atmel.com
Mon Oct 29 05:10:14 EDT 2012
Request a slave dma channel for tx dma use
Signed-off-by: Elen Song <elen.song at atmel.com>
---
drivers/tty/serial/atmel_serial.c | 110 +++++++++++++++++++++++++++++++++++++
1 file changed, 110 insertions(+)
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 8a4b8f8..c02a919 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -151,6 +151,14 @@ struct atmel_uart_port {
short use_pdc_tx; /* enable PDC transmitter */
struct atmel_dma_buffer pdc_tx; /* PDC transmitter */
+ spinlock_t lock_tx; /* port lock */
+ struct dma_chan *chan_tx;
+ struct dma_async_tx_descriptor *desc_tx;
+ dma_cookie_t cookie_tx;
+
+ struct scatterlist sg_tx;
+ unsigned int sg_len_tx;
+
struct tasklet_struct tasklet;
unsigned int irq_status;
unsigned int irq_status_prev;
@@ -582,6 +590,102 @@ static void atmel_tx_chars(struct uart_port *port)
UART_PUT_IER(port, atmel_port->tx_done_mask);
}
+static void atmel_tx_dma_release(struct atmel_uart_port *atmel_port)
+{
+ struct dma_chan *chan = atmel_port->chan_tx;
+
+ atmel_port->chan_tx = NULL;
+ atmel_port->cookie_tx = -EINVAL;
+ if (chan) {
+ dmaengine_terminate_all(chan);
+ dma_release_channel(chan);
+ }
+}
+
+static bool filter(struct dma_chan *chan, void *slave)
+{
+ struct at_dma_slave *sl = slave;
+
+ if (sl->dma_dev == chan->device->dev) {
+ chan->private = sl;
+ return true;
+ } else {
+ return false;
+ }
+}
+
+static void atmel_tx_request_dma(struct atmel_uart_port *atmel_port)
+{
+ struct uart_port *port;
+ struct atmel_uart_data *pdata;
+ dma_cap_mask_t mask;
+ struct dma_chan *chan = NULL;
+ struct dma_slave_config config;
+ int ret;
+
+ if (atmel_port == NULL)
+ return;
+
+ port = &(atmel_port->uart);
+ pdata = (struct atmel_uart_data *)port->private_data;
+
+ if (!pdata) {
+ dev_notice(port->dev, "DMA not available, using PIO\n");
+ return;
+ }
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ if (atmel_use_dma_tx(port) && pdata->dma_tx_slave) {
+ pdata->dma_tx_slave->tx_reg = port->mapbase + ATMEL_US_THR;
+ chan = dma_request_channel(mask, filter, pdata->dma_tx_slave);
+ dev_dbg(port->dev, "%s: TX: got channel %p\n", __func__, chan);
+ }
+
+ if (chan) {
+ int nent;
+
+ spin_lock_init(&atmel_port->lock_tx);
+ atmel_port->chan_tx = chan;
+
+ sg_init_table(&atmel_port->sg_tx, 1);
+ /* UART circular tx buffer is an aligned page. */
+ BUG_ON((int)port->state->xmit.buf & ~PAGE_MASK);
+ sg_set_page(&atmel_port->sg_tx,
+ virt_to_page(port->state->xmit.buf),
+ UART_XMIT_SIZE,
+ (int)port->state->xmit.buf & ~PAGE_MASK);
+ nent = dma_map_sg(port->dev,
+ &atmel_port->sg_tx,
+ 1,
+ DMA_MEM_TO_DEV);
+
+ if (!nent)
+ dev_dbg(port->dev, "need to release resource of dma\n");
+ else
+ dev_dbg(port->dev, "%s: mapped %d@%p to %x\n", __func__,
+ sg_dma_len(&atmel_port->sg_tx),
+ port->state->xmit.buf,
+ sg_dma_address(&atmel_port->sg_tx));
+
+ atmel_port->sg_len_tx = nent;
+ }
+
+ /* Configure the slave DMA */
+ memset(&config, 0, sizeof(config));
+ config.direction = DMA_MEM_TO_DEV;
+ config.dst_addr_width = pdata->dma_tx_slave->reg_width;
+ config.dst_addr = pdata->dma_tx_slave->tx_reg;
+
+ ret = dmaengine_device_control(chan, DMA_SLAVE_CONFIG,
+ (unsigned long)&config);
+ if (ret) {
+ dev_err(port->dev, "DMA tx slave configuration failed\n");
+ return;
+ }
+}
+
/*
* receive interrupt handler.
*/
@@ -994,6 +1098,9 @@ static int atmel_startup(struct uart_port *port)
pdc->ofs = 0;
}
+ if (atmel_use_dma_tx(port))
+ atmel_tx_request_dma(atmel_port);
+
/*
* If there is a specific "open" function (to register
* control line interrupts)
@@ -1070,6 +1177,9 @@ static void atmel_shutdown(struct uart_port *port)
DMA_TO_DEVICE);
}
+ if (atmel_use_dma_tx(port))
+ atmel_tx_dma_release(atmel_port);
+
/*
* Disable all interrupts, port and break condition.
*/
--
1.7.9.5
More information about the linux-arm-kernel
mailing list