Which kirkwood does your DT board use?

[Josh Coombs]

On Sat, Oct 20, 2012 at 7:38 AM, Andrew Lunn <andrew at lunn.ch> wrote:
> Hi Folks
>
> All of you in the To: have contributed a DT based Kirkwood board port.
> Nearly all the DT files we have declare the CPU to be
> marvell,kirkwood-88f6281. For adding DT based pinctrl, to replace the
> mpp code, we need to know the exact kirkwood being used. It should be
> one of MV88F6180, MV88F6190, MV88F6192, MV88F6281 or MV88F6282.
>
> You can see what your hardware has a boot time:
>
> Kirkwood: MV88F6282-Rev-A0, TCLK=200000000.
>
> Please could you check your hardware and let me know what the correct
> CPU is. I can then fix the .dts files and prepare a first attempt at
> converting boards to pinctrl.
>
> Thanks
>         Andrew

Seagate GoFlexNet
[jcoombs at alarm ~]$ dmesg | grep -i tclk
[    5.851008] Kirkwood: MV88F6281-A0, TCLK=200000000.

Joshua Coombs