[PATCH 1/3] ARM: tegra: simplify DEBUG_LL UART selection options
Stephen Warren
swarren at wwwdotorg.org
Tue Oct 2 15:07:44 EDT 2012
From: Stephen Warren <swarren at nvidia.com>
Delete CONFIG_TEGRA_DEBUG_UART_AUTO_SCRATCH; it's not useful any more:
* No upstream bootloader currently or will ever support this option.
* CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA is a much more direct alternative.
Merge the fixed and automatic UART selection menus into a single choice
for simplicity; now you either pick AUTO_ODMDATA or a single fixed UART,
rather than potentially having an AUTO option override whatever fixed
option was chosen.
Remove TEGRA_DEBUG_UART_NONE; if you don't want a Tegra DEBUG_LL UART,
simply don't turn on DEBUG_LL. NONE used to be the default option, so
pick AUTO_ODMDATA as the new default.
Signed-off-by: Stephen Warren <swarren at nvidia.com>
---
arch/arm/mach-tegra/Kconfig | 41 +++++---------------
arch/arm/mach-tegra/common.c | 5 +-
arch/arm/mach-tegra/include/mach/iomap.h | 14 -------
arch/arm/mach-tegra/include/mach/uncompress.h | 52 ++-----------------------
4 files changed, 16 insertions(+), 96 deletions(-)
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 1219d87..87f0e2d 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -58,11 +58,17 @@ config TEGRA_AHB
perfomance parameters(priority, prefech size).
choice
- prompt "Default low-level debug console UART"
- default TEGRA_DEBUG_UART_NONE
+ prompt "Low-level debug console UART"
+ default TEGRA_DEBUG_UART_AUTO_ODMDATA
-config TEGRA_DEBUG_UART_NONE
- bool "None"
+config TEGRA_DEBUG_UART_AUTO_ODMDATA
+ bool "Via ODMDATA"
+ help
+ Automatically determines which UART to use for low-level debug based
+ on the ODMDATA value. This value is part of the BCT, and is written
+ to the boot memory device using nvflash, or other flashing tool.
+ When bits 19:18 are 3, then bits 17:15 indicate which UART to use;
+ 0/1/2/3/4 are UART A/B/C/D/E.
config TEGRA_DEBUG_UARTA
bool "UART-A"
@@ -81,33 +87,6 @@ config TEGRA_DEBUG_UARTE
endchoice
-choice
- prompt "Automatic low-level debug console UART"
- default TEGRA_DEBUG_UART_AUTO_NONE
-
-config TEGRA_DEBUG_UART_AUTO_NONE
- bool "None"
-
-config TEGRA_DEBUG_UART_AUTO_ODMDATA
- bool "Via ODMDATA"
- help
- Automatically determines which UART to use for low-level debug based
- on the ODMDATA value. This value is part of the BCT, and is written
- to the boot memory device using nvflash, or other flashing tool.
- When bits 19:18 are 3, then bits 17:15 indicate which UART to use;
- 0/1/2/3/4 are UART A/B/C/D/E.
-
-config TEGRA_DEBUG_UART_AUTO_SCRATCH
- bool "Via UART scratch register"
- help
- Automatically determines which UART to use for low-level debug based
- on the UART scratch register value. Some bootloaders put ASCII 'D'
- in this register when they initialize their own console UART output.
- Using this option allows the kernel to automatically pick the same
- UART.
-
-endchoice
-
config TEGRA_EMC_SCALING_ENABLE
bool "Enable scaling the memory frequency"
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index 0b0a5f5..0913d1f 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -44,14 +44,13 @@
* kernel is loaded. The data is declared here rather than debug-macro.S so
* that multiple inclusions of debug-macro.S point at the same data.
*/
-#define TEGRA_DEBUG_UART_OFFSET (TEGRA_DEBUG_UART_BASE & 0xFFFF)
u32 tegra_uart_config[3] = {
/* Debug UART initialization required */
1,
/* Debug UART physical address */
- (u32)(IO_APB_PHYS + TEGRA_DEBUG_UART_OFFSET),
+ 0,
/* Debug UART virtual address */
- (u32)(IO_APB_VIRT + TEGRA_DEBUG_UART_OFFSET),
+ 0,
};
#ifdef CONFIG_OF
diff --git a/arch/arm/mach-tegra/include/mach/iomap.h b/arch/arm/mach-tegra/include/mach/iomap.h
index fee3a94..4f1d9a3 100644
--- a/arch/arm/mach-tegra/include/mach/iomap.h
+++ b/arch/arm/mach-tegra/include/mach/iomap.h
@@ -263,20 +263,6 @@
#define TEGRA_SDMMC4_BASE 0xC8000600
#define TEGRA_SDMMC4_SIZE SZ_512
-#if defined(CONFIG_TEGRA_DEBUG_UART_NONE)
-# define TEGRA_DEBUG_UART_BASE 0
-#elif defined(CONFIG_TEGRA_DEBUG_UARTA)
-# define TEGRA_DEBUG_UART_BASE TEGRA_UARTA_BASE
-#elif defined(CONFIG_TEGRA_DEBUG_UARTB)
-# define TEGRA_DEBUG_UART_BASE TEGRA_UARTB_BASE
-#elif defined(CONFIG_TEGRA_DEBUG_UARTC)
-# define TEGRA_DEBUG_UART_BASE TEGRA_UARTC_BASE
-#elif defined(CONFIG_TEGRA_DEBUG_UARTD)
-# define TEGRA_DEBUG_UART_BASE TEGRA_UARTD_BASE
-#elif defined(CONFIG_TEGRA_DEBUG_UARTE)
-# define TEGRA_DEBUG_UART_BASE TEGRA_UARTE_BASE
-#endif
-
/* On TEGRA, many peripherals are very closely packed in
* two 256MB io windows (that actually only use about 64KB
* at the start of each).
diff --git a/arch/arm/mach-tegra/include/mach/uncompress.h b/arch/arm/mach-tegra/include/mach/uncompress.h
index 937c4c5..d5b86ce 100644
--- a/arch/arm/mach-tegra/include/mach/uncompress.h
+++ b/arch/arm/mach-tegra/include/mach/uncompress.h
@@ -139,51 +139,19 @@ int auto_odmdata(void)
}
#endif
-#ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_SCRATCH
-int auto_scratch(void)
-{
- int i;
-
- /*
- * Look for the first UART that:
- * a) Is not in reset.
- * b) Is clocked.
- * c) Has a 'D' in the scratchpad register.
- *
- * Note that on Tegra30, the first two conditions are required, since
- * if not true, accesses to the UART scratch register will hang.
- * Tegra20 doesn't have this issue.
- *
- * The intent is that the bootloader will tell the kernel which UART
- * to use by setting up those conditions. If nothing found, we'll fall
- * back to what's specified in TEGRA_DEBUG_UART_BASE.
- */
- for (i = 0; i < ARRAY_SIZE(uarts); i++) {
- if (!uart_clocked(i))
- continue;
-
- uart = (volatile u8 *)uarts[i].base;
- if (uart[UART_SCR << DEBUG_UART_SHIFT] != 'D')
- continue;
-
- return i;
- }
-
- return -1;
-}
-#endif
-
/*
* Setup before decompression. This is where we do UART selection for
* earlyprintk and init the uart_base register.
*/
static inline void arch_decomp_setup(void)
{
- int uart_id, auto_uart_id;
+ int uart_id;
volatile u32 *apb_misc = (volatile u32 *)TEGRA_APB_MISC_BASE;
u32 chip, div;
-#if defined(CONFIG_TEGRA_DEBUG_UARTA)
+#if defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
+ uart_id = auto_odmdata();
+#elif defined(CONFIG_TEGRA_DEBUG_UARTA)
uart_id = 0;
#elif defined(CONFIG_TEGRA_DEBUG_UARTB)
uart_id = 1;
@@ -193,19 +161,7 @@ static inline void arch_decomp_setup(void)
uart_id = 3;
#elif defined(CONFIG_TEGRA_DEBUG_UARTE)
uart_id = 4;
-#else
- uart_id = -1;
-#endif
-
-#if defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
- auto_uart_id = auto_odmdata();
-#elif defined(CONFIG_TEGRA_DEBUG_UART_AUTO_SCRATCH)
- auto_uart_id = auto_scratch();
-#else
- auto_uart_id = -1;
#endif
- if (auto_uart_id != -1)
- uart_id = auto_uart_id;
if (uart_id < 0 || uart_id >= ARRAY_SIZE(uarts) ||
!uart_clocked(uart_id))
--
1.7.0.4
More information about the linux-arm-kernel
mailing list