[RFC 04/11] ARM: Kirkwood: Convert iConnect to pinctrl.
Andrew Lunn
andrew at lunn.ch
Sat Oct 20 11:11:35 EDT 2012
Signed-off-by: Andrew Lunn <andrew at lunn.ch>
---
arch/arm/boot/dts/kirkwood-iconnect.dts | 52 +++++++++++++++++++++++++++++++
arch/arm/mach-kirkwood/board-iconnect.c | 17 ----------
2 files changed, 52 insertions(+), 17 deletions(-)
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
index d97cd9d..7b926f7 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -18,6 +18,58 @@
};
ocp at f1000000 {
+ pinctrl: pinctrl at 10000 {
+ compatible = "marvell,88f6281-pinctrl";
+ reg = <0x10000 0x20>;
+
+ pinctrl-0 = < &pmx_gpio_12 &pmx_gpio_35
+ &pmx_gpio_41 &pmx_gpio_42
+ &pmx_gpio_43 &pmx_gpio_44
+ &pmx_gpio_45 &pmx_gpio_46
+ &pmx_gpio_47 &pmx_gpio_48 >;
+ pinctrl-names = "default";
+
+ pmx_gpio_12: pmx-gpio-12 {
+ marvell,pins = "mpp12";
+ marvell,function = "gpio";
+ };
+ pmx_gpio_35: pmx-gpio-35 {
+ marvell,pins = "mpp35";
+ marvell,function = "gpio";
+ };
+ pmx_gpio_41: pmx-gpio-41 {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+ pmx_gpio_42: pmx-gpio-42 {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+ pmx_gpio_43: pmx-gpio-43 {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+ pmx_gpio_44: pmx-gpio-44 {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+ pmx_gpio_45: pmx-gpio-45 {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+ pmx_gpio_46: pmx-gpio-46 {
+ marvell,pins = "mpp46";
+ marvell,function = "gpio";
+ };
+ pmx_gpio_47: pmx-gpio-47 {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+ pmx_gpio_48: pmx-gpio-48 {
+ marvell,pins = "mpp48";
+ marvell,function = "gpio";
+ };
+ };
i2c at 11000 {
status = "okay";
diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c
index d084b1e..aeba479 100644
--- a/arch/arm/mach-kirkwood/board-iconnect.c
+++ b/arch/arm/mach-kirkwood/board-iconnect.c
@@ -21,30 +21,13 @@
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include "common.h"
-#include "mpp.h"
static struct mv643xx_eth_platform_data iconnect_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(11),
};
-static unsigned int iconnect_mpp_config[] __initdata = {
- MPP12_GPIO,
- MPP35_GPIO,
- MPP41_GPIO,
- MPP42_GPIO,
- MPP43_GPIO,
- MPP44_GPIO,
- MPP45_GPIO,
- MPP46_GPIO,
- MPP47_GPIO,
- MPP48_GPIO,
- 0
-};
-
void __init iconnect_init(void)
{
- kirkwood_mpp_conf(iconnect_mpp_config);
-
kirkwood_ehci_init();
kirkwood_ge00_init(&iconnect_ge00_data);
}
--
1.7.10.4
More information about the linux-arm-kernel
mailing list