[RESEND][PATCH v4] gpio/omap: fix off-mode bug: clear debounce settings on free/reset
Jon Hunter
jon-hunter at ti.com
Fri Oct 26 15:22:09 EDT 2012
Sorry, ignore these ...
On 10/26/2012 02:20 PM, Jon Hunter wrote:
> From: Kevin Hilman <khilman at ti.com>
... forgot to change the author from Kevin to me. Will re-post.
Jon
> This change was originally titled "gpio/omap: fix off-mode bug: clear debounce
> clock enable mask on free/reset". The title has been updated slightly to
> reflect (what should be) the final fix.
>
> When a GPIO is freed or shutdown, we need to ensure that any debounce settings
> are cleared and if the GPIO is the only GPIO in the bank that is currently
> using debounce, then disable the debounce clock as well to save power.
>
> Currently, the debounce settings are not cleared on a GPIO free or shutdown and
> so during a context restore on subsequent off-mode transition, the previous
> debounce values are restored from the shadow copies (bank->context.debounce*)
> leading to mismatch state between driver state and hardware state.
>
> This was discovered when board code was doing
>
> gpio_request_one()
> gpio_set_debounce()
> gpio_free()
>
> which was leaving the GPIO debounce settings in a confused state. If that GPIO
> bank is subsequently used with off-mode enabled, bogus state would be restored,
> leaving GPIO debounce enabled which then prevented the CORE powerdomain from
> transitioning.
>
> To fix this, introduce a new function called _clear_gpio_debounce() to clear
> any debounce settings when the GPIO is freed or shutdown. If this GPIO is the
> last debounce-enabled GPIO in the bank, the debounce will also be cut.
>
> Please note that we cannot use _gpio_dbck_disable() to disable the debounce
> clock because this has been specifically created for the gpio suspend path
> and is intended to shutdown the debounce clock while debounce is enabled.
>
> Special thanks to Kevin Hilman for root causing the bug. This fix is a
> collaborative effort with inputs from Kevin Hilman, Grazvydas Ignotas and
> Santosh Shilimkar.
>
> Testing:
> - This has been unit tested on an OMAP3430 Beagle board, by requesting a gpio,
> enabling debounce and then freeing the gpio and checking the register
> contents, the saved register context and the debounce clock state.
> - Kevin Hilman tested on 37xx/EVM board which configures GPIO debounce for the
> ads7846 touchscreen in its board file using the above sequence, and so was
> failing off-mode tests in dynamic idle. Verified that off-mode tests are
> passing with this patch.
>
> Reported-by: Paul Walmsley <paul at pwsan.com>
> Cc: Igor Grinberg <grinberg at compulab.co.il>
> Cc: Grazvydas Ignotas <notasas at gmail.com>
> Cc: Jon Hunter <jon-hunter at ti.com>
> Signed-off-by: Jon Hunter <jon-hunter at ti.com>
> Reviewed-by: Kevin Hilman <khilman at ti.com>
> Tested-by: Kevin Hilman <khilman at ti.com>
> Acked-by: Santosh Shilimkar <santosh.shilimkar at ti.com>
> ---
> drivers/gpio/gpio-omap.c | 35 +++++++++++++++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
>
> diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
> index 94cbc84..d335af1 100644
> --- a/drivers/gpio/gpio-omap.c
> +++ b/drivers/gpio/gpio-omap.c
> @@ -251,6 +251,40 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
> }
> }
>
> +/**
> + * _clear_gpio_debounce - clear debounce settings for a gpio
> + * @bank: the gpio bank we're acting upon
> + * @gpio: the gpio number on this @gpio
> + *
> + * If a gpio is using debounce, then clear the debounce enable bit and if
> + * this is the only gpio in this bank using debounce, then clear the debounce
> + * time too. The debounce clock will also be disabled when calling this function
> + * if this is the only gpio in the bank using debounce.
> + */
> +static void _clear_gpio_debounce(struct gpio_bank *bank, unsigned gpio)
> +{
> + u32 gpio_bit = GPIO_BIT(bank, gpio);
> +
> + if (!bank->dbck_flag)
> + return;
> +
> + if (!(bank->dbck_enable_mask & gpio_bit))
> + return;
> +
> + bank->dbck_enable_mask &= ~gpio_bit;
> + bank->context.debounce_en &= ~gpio_bit;
> + __raw_writel(bank->context.debounce_en,
> + bank->base + bank->regs->debounce_en);
> +
> + if (!bank->dbck_enable_mask) {
> + bank->context.debounce = 0;
> + __raw_writel(bank->context.debounce, bank->base +
> + bank->regs->debounce);
> + clk_disable(bank->dbck);
> + bank->dbck_enabled = false;
> + }
> +}
> +
> static inline void set_gpio_trigger(struct gpio_bank *bank, int gpio,
> unsigned trigger)
> {
> @@ -539,6 +573,7 @@ static void _reset_gpio(struct gpio_bank *bank, int gpio)
> _set_gpio_irqenable(bank, gpio, 0);
> _clear_gpio_irqstatus(bank, gpio);
> _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), IRQ_TYPE_NONE);
> + _clear_gpio_debounce(bank, gpio);
> }
>
> /* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
>
More information about the linux-arm-kernel
mailing list