[PATCH 2/8] ARM: S3C64XX: Update hookup for Arizona class devices

[Mark Brown]

Renumber to use SPI /CS 1 instead of 0 to allow coexistance with DSPs.
Also add additional supplies for the devices while we're at it.

Signed-off-by: Mark Brown <broonie at opensource.wolfsonmicro.com>
---
 arch/arm/mach-s3c64xx/mach-crag6410-module.c |    2 +-
 arch/arm/mach-s3c64xx/mach-crag6410.c        |   23 ++++++++++++++++++++++-
 2 files changed, 23 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 3364fab..89f5e7d 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -202,7 +202,7 @@ static struct spi_board_info wm5102_spi_devs[] = {
 		.modalias	= "wm5102",
 		.max_speed_hz	= 10 * 1000 * 1000,
 		.bus_num	= 0,
-		.chip_select	= 0,
+		.chip_select	= 1,
 		.mode		= SPI_MODE_0,
 		.irq		= GLENFARCLAS_PMIC_IRQ_BASE +
 				  WM831X_IRQ_GPIO_2,
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 13b7eaa..6d5b2c6 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -304,6 +304,13 @@ static struct regulator_consumer_supply wallvdd_consumers[] = {
 	REGULATOR_SUPPLY("SPKVDDL", "1-001a"),
 	REGULATOR_SUPPLY("SPKVDDR", "1-001a"),
 
+	REGULATOR_SUPPLY("SPKVDDL", "spi0.1"),
+	REGULATOR_SUPPLY("SPKVDDR", "spi0.1"),
+	REGULATOR_SUPPLY("SPKVDDL", "wm5102-codec"),
+	REGULATOR_SUPPLY("SPKVDDR", "wm5102-codec"),
+	REGULATOR_SUPPLY("SPKVDDL", "wm5110-codec"),
+	REGULATOR_SUPPLY("SPKVDDR", "wm5110-codec"),
+
 	REGULATOR_SUPPLY("DC1VDD", "0-0034"),
 	REGULATOR_SUPPLY("DC2VDD", "0-0034"),
 	REGULATOR_SUPPLY("DC3VDD", "0-0034"),
@@ -597,6 +604,7 @@ static struct s3c2410_platform_i2c i2c0_pdata = {
 static struct regulator_consumer_supply pvdd_1v2_consumers[] __devinitdata = {
 	REGULATOR_SUPPLY("DCVDD", "spi0.0"),
 	REGULATOR_SUPPLY("AVDD", "spi0.0"),
+	REGULATOR_SUPPLY("AVDD", "spi0.1"),
 };
 
 static struct regulator_init_data pvdd_1v2 __devinitdata = {
@@ -621,6 +629,19 @@ static struct regulator_consumer_supply pvdd_1v8_consumers[] __devinitdata = {
 	REGULATOR_SUPPLY("DCVDD", "1-001a"),
 	REGULATOR_SUPPLY("AVDD", "1-001a"),
 	REGULATOR_SUPPLY("DBVDD", "spi0.0"),
+	REGULATOR_SUPPLY("DBVDD1", "spi0.1"),
+	REGULATOR_SUPPLY("DBVDD2", "spi0.1"),
+	REGULATOR_SUPPLY("DBVDD3", "spi0.1"),
+	REGULATOR_SUPPLY("LDOVDD", "spi0.1"),
+	REGULATOR_SUPPLY("CPVDD", "spi0.1"),
+
+	REGULATOR_SUPPLY("DBVDD2", "wm5102-codec"),
+	REGULATOR_SUPPLY("DBVDD3", "wm5102-codec"),
+	REGULATOR_SUPPLY("CPVDD", "wm5102-codec"),
+
+	REGULATOR_SUPPLY("DBVDD2", "wm5110-codec"),
+	REGULATOR_SUPPLY("DBVDD3", "wm5110-codec"),
+	REGULATOR_SUPPLY("CPVDD", "wm5110-codec"),
 };
 
 static struct regulator_init_data pvdd_1v8 __devinitdata = {
@@ -810,7 +831,7 @@ static void __init crag6410_machine_init(void)
 	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
 
 	samsung_keypad_set_platdata(&crag6410_keypad_data);
-	s3c64xx_spi0_set_platdata(NULL, 0, 1);
+	s3c64xx_spi0_set_platdata(NULL, 0, 2);
 
 	platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices));
 
-- 
1.7.10.4