May 2012 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Tue May 1 01:34:41 EDT 2012
Ending: Thu May 31 23:45:45 EDT 2012
Messages: 5228

• [PATCH] mfd: da9052: fix of_match_node() arguments   Ying-Chun Liu (PaulLiu)
• [PATCH] arm: imx53-qsb: Add Dialog DA9053 PMIC support   Ying-Chun Liu (PaulLiu)
• [PATCH V2] mfd: anatop: make register accessor more flexible and rename meaningfully   Ying-Chun Liu (PaulLiu)
• [PATCH 2/2] mfd: anatop: permit adata be NULL when access register   Ying-Chun Liu (PaulLiu)
• [PATCH 2/2] mfd: anatop: permit adata be NULL when access register   Ying-Chun Liu (PaulLiu)
• [PATCH 2/2] mfd: anatop: permit adata be NULL when access register   Ying-Chun Liu (PaulLiu)
• Making ARM multiplatform kernels DT-only?   Arnaud Patard (Rtp)
• [patch v2 3/3] kirkwood: Add iconnect support   Arnaud Patard (Rtp)
• [PATCH 2/8] arm: mach-armada: add source files   Arnaud Patard (Rtp)
• kirkwood, nand, clocks and device-tree   Arnaud Patard (Rtp)
• [PATCH] ixp4xx: fix compilation by adding gpiolib support   Arnaud Patard (Rtp)
• [PATCH v4 2/2] ARM: vfp: clear fpscr length and stride bits on entry to sig handler   Jon Medhurst (Tixy)
• [PATCH v4 2/2] ARM: vfp: clear fpscr length and stride bits on entry to sig handler   Jon Medhurst (Tixy)
• [PATCH v4 2/2] ARM: vfp: clear fpscr length and stride bits on entry to sig handler   Jon Medhurst (Tixy)
• 2012-5-11   =?GB2312?B?oe/B1s/Iyfq1zbXjsGyjqMaxo6mh7w==?=
• [RFC PATCH 0/5] omap: add ocp2scp as a misc driver   ABRAHAM, KISHON VIJAY
• [RFC PATCH 0/5] omap: add ocp2scp as a misc driver   ABRAHAM, KISHON VIJAY
• [PATCH V2 0/1] dmaengine/amba-pl08x: Add support for s3c64xx DMAC   ALIM AKHTAR
• Bad use of highmem with buffer_migrate_page?   Laura Abbott
• Bad use of highmem with buffer_migrate_page?   Laura Abbott
• [PATCH] arm: Don't try to print pud/pmd information unless present   Laura Abbott
• [PATCH] mmc: dw_mmc: make multiple instances of dw_mci_card_workqueue   Thomas Abraham
• [PATCH 0/7] mmc: dw_mmc: add support for device tree based instantiation   Thomas Abraham
• [PATCH 1/7] mmc: dw_mmc: lookup for optional biu and ciu clocks   Thomas Abraham
• [PATCH 2/7] mmc: dw_mmc: add quirk to indicate missing write protect line   Thomas Abraham
• [PATCH 3/7] mmc: dw_mmc: add device tree support   Thomas Abraham
• [PATCH 4/7] mmc: dw_mmc: add samsung exynos5250 specific extentions   Thomas Abraham
• [PATCH 5/7] ARM: Samsung: Add support for MSHC controller clocks   Thomas Abraham
• [PATCH 6/7] ARM: Exynos5: Add AUXDATA support for MSHC controllers   Thomas Abraham
• [PATCH 7/7] ARM: dts: Add nodes for dw_mmc controllers for Samsung Exynos5250 platforms   Thomas Abraham
• [PATCH] dma: pl330: assign a new cookie when restarting tx descriptors in cyclic mode   Thomas Abraham
• [PATCH] dma: pl330: assign a new cookie when restarting tx descriptors in cyclic mode   Thomas Abraham
• [PATCH 00/10] spi: s3c64xx: add support for device tree   Thomas Abraham
• [PATCH 01/10] spi: s3c64xx: remove unused S3C64XX_SPI_ST_TRLCNTZ macro   Thomas Abraham
• [PATCH 02/10] spi: s3c64xx: move controller information into driver data   Thomas Abraham
• [PATCH 03/10] ARM: Samsung: Remove spi hardware controller information from platform data   Thomas Abraham
• [PATCH 04/10] ARM: Samsung: Remove pdev pointer paremeter from spi gpio setup functions   Thomas Abraham
• [PATCH 05/10] ARM: Samsung: Update the device names for spi clock lookup   Thomas Abraham
• [PATCH 06/10] ARM: Samsung: Modify s3c64xx_spi{0|1|2}_set_platdata function   Thomas Abraham
• [PATCH 07/10] spi: s3c64xx: Remove the 'set_level' callback from controller data   Thomas Abraham
• [PATCH 08/10] ARM: Exynos4: Fix the incorrect hierarchy of spi controller bus clock   Thomas Abraham
• [PATCH 09/10] ARM: Exynos5: Add spi clock support   Thomas Abraham
• [PATCH 10/10] spi: s3c64xx: add device tree support   Thomas Abraham
• [PATCH] mtd: m25p80: Add support for Winbond W25Q80BW   Thomas Abraham
• [PATCH 05/10] ARM: Samsung: Update the device names for spi clock lookup   Thomas Abraham
• [PATCH 10/10] spi: s3c64xx: add device tree support   Thomas Abraham
• [PATCH 06/10] ARM: Samsung: Modify s3c64xx_spi{0|1|2}_set_platdata function   Thomas Abraham
• [PATCH 06/10] ARM: Samsung: Modify s3c64xx_spi{0|1|2}_set_platdata function   Thomas Abraham
• [PATCH 10/10] spi: s3c64xx: add device tree support   Thomas Abraham
• [PATCH 05/10] ARM: Samsung: Update the device names for spi clock lookup   Thomas Abraham
• [PATCH 10/10] spi: s3c64xx: add device tree support   Thomas Abraham
• [PATCH 1/7] mmc: dw_mmc: lookup for optional biu and ciu clocks   Thomas Abraham
• [PATCH 1/7] mmc: dw_mmc: lookup for optional biu and ciu clocks   Thomas Abraham
• [PATCH 1/7] mmc: dw_mmc: lookup for optional biu and ciu clocks   Thomas Abraham
• [PATCH 3/7] mmc: dw_mmc: add device tree support   Thomas Abraham
• [PATCH 3/7] mmc: dw_mmc: add device tree support   Thomas Abraham
• [PATCH 3/7] mmc: dw_mmc: add device tree support   Thomas Abraham
• [PATCH 4/7] mmc: dw_mmc: add samsung exynos5250 specific extentions   Thomas Abraham
• [PATCH 3/7] mmc: dw_mmc: add device tree support   Thomas Abraham
• [PATCH 4/7] mmc: dw_mmc: add samsung exynos5250 specific extentions   Thomas Abraham
• [PATCH 4/7] mmc: dw_mmc: add samsung exynos5250 specific extentions   Thomas Abraham
• [PATCH 3/7] mmc: dw_mmc: add device tree support   Thomas Abraham
• [PATCH 3/7] mmc: dw_mmc: add device tree support   Thomas Abraham
• [PATCH 00/20] ARM: Samsung: Add support for Exynos5250 Rev1.0   Thomas Abraham
• [PATCH 18/20] ARM: dts: Update device tree source files for EXYNOS5250   Thomas Abraham
• [PATCH v2 18/20] ARM: dts: Update device tree source files for EXYNOS5250   Thomas Abraham
• [PATCH v2 0/6] mmc: dw_mmc: add support for device tree based instantiation   Thomas Abraham
• [PATCH v2 1/6] mmc: dw_mmc: convert copy of struct device in struct dw_mci to a reference   Thomas Abraham
• [PATCH v2 2/6] mmc: dw_mmc: allow probe to succeed even if one slot is initialized   Thomas Abraham
• [PATCH v2 3/6] mmc: dw_mmc: lookup for optional biu and ciu clocks   Thomas Abraham
• [PATCH v2 4/6] mmc: dw_mmc: add quirk to indicate missing write protect line   Thomas Abraham
• [PATCH v2 5/6] mmc: dw_mmc: add device tree support   Thomas Abraham
• [PATCH v2 6/6] mmc: dw_mmc: add samsung exynos5250 specific extentions   Thomas Abraham
• [PATCH 3/7] mmc: dw_mmc: add device tree support   Thomas Abraham
• [PATCH 0/3] ARM: Exynos5: Enable support for DW-MMC controllers   Thomas Abraham
• [PATCH 1/3] ARM: Exynos5: Add support for MSHC controller clocks   Thomas Abraham
• [PATCH 2/3] ARM: Exynos5: Add AUXDATA support for MSHC controllers   Thomas Abraham
• [PATCH 3/3] ARM: dts: Add nodes for dw_mmc controllers for Samsung Exynos5250 platforms   Thomas Abraham
• [PATCH v2 0/6] spi: s3c64xx: add support for device tree   Thomas Abraham
• [PATCH v2 1/6] spi: s3c64xx: remove unused S3C64XX_SPI_ST_TRLCNTZ macro   Thomas Abraham
• [PATCH v2 2/6] spi: s3c64xx: move controller information into driver data   Thomas Abraham
• [PATCH v2 3/6] ARM: Samsung: Remove pdev pointer paremeter from spi gpio setup functions   Thomas Abraham
• [PATCH v2 4/6] ARM: Samsung: Modify s3c64xx_spi{0|1|2}_set_platdata function   Thomas Abraham
• [PATCH v2 5/6] spi: s3c64xx: Remove the 'set_level' callback from controller data   Thomas Abraham
• [PATCH v2 6/6] spi: s3c64xx: add device tree support   Thomas Abraham
• [PATCH 0/6] ARM: Exynos: Enable SPI platform support for Exynos4 and Exynos5   Thomas Abraham
• [PATCH 1/6] ARM: Exynos4: Fix the incorrect hierarchy of spi controller bus clock   Thomas Abraham
• [PATCH 2/6] ARM: Exynos5: Add spi clock support   Thomas Abraham
• [PATCH 3/6] ARM: Exynos4: Enable platform support for SPI controllers   Thomas Abraham
• [PATCH 4/6] ARM: Exynos5: Enable platform support for SPI controllers   Thomas Abraham
• [PATCH 5/6] ARM: dts: Add nodes for spi controllers for Samsung Exynos4 platforms   Thomas Abraham
• [PATCH 6/6] ARM: dts: Add nodes for spi controllers for Samsung Exynos5 platforms   Thomas Abraham
• [PATCH 0/3] pinctrl: add support for samsung pinctrl driver   Thomas Abraham
• [PATCH 1/3] pinctrl: add samsung pinctrl and gpiolib driver   Thomas Abraham
• [PATCH 2/3] pinctrl: add exynos4210 specific driver data for samsung pinctrl driver   Thomas Abraham
• [PATCH 3/3] gpio: exynos4: skip gpiolib registration if pinctrl driver is used   Thomas Abraham
• [PATCH v2 2/6] spi: s3c64xx: move controller information into driver data   Thomas Abraham
• [PATCH 1/6] ARM: Exynos4: Fix the incorrect hierarchy of spi controller bus clock   Thomas Abraham
• [PATCH 2/6] ARM: Exynos5: Add spi clock support   Thomas Abraham
• [PATCH 5/6] ARM: dts: Add nodes for spi controllers for Samsung Exynos4 platforms   Thomas Abraham
• [PATCH 6/6] ARM: dts: Add nodes for spi controllers for Samsung Exynos5 platforms   Thomas Abraham
• [PATCH 10/20] of/irq: fix interrupt parent lookup procedure   Thomas Abraham
• [PATCH v2 4/6] ARM: Samsung: Modify s3c64xx_spi{0|1|2}_set_platdata function   Thomas Abraham
• [PATCH 02/10] spi: s3c64xx: move controller information into driver data   Thomas Abraham
• [PATCH v2 4/6] ARM: Samsung: Modify s3c64xx_spi{0|1|2}_set_platdata function   Thomas Abraham
• [PATCH v2 4/6] ARM: Samsung: Modify s3c64xx_spi{0|1|2}_set_platdata function   Thomas Abraham
• [PATCH 1/3] pinctrl: add samsung pinctrl and gpiolib driver   Thomas Abraham
• [PATCH 0/3] pinctrl: add support for samsung pinctrl driver   Thomas Abraham
• [PATCH v2 4/6] ARM: Samsung: Modify s3c64xx_spi{0|1|2}_set_platdata function   Thomas Abraham
• [PATCH 2/2] pcm038 lcdc support   Dave Airlie
• [PATCH v4 4/4] mmc: sdhci-imx-esdhc: convert to use pinctrl subsystem   Dong Aisheng
• [PATCH 1/3] ARM: imx: enable pinctrl dummy states   Dong Aisheng
• [PATCH 2/3] ARM: imx6q: switch to use pinctrl subsystem   Dong Aisheng
• [PATCH 3/3] mmc: sdhci-imx-esdhc: convert to use pinctrl subsystem   Dong Aisheng
• [PATCH v2 1/5] dma: mxs-dma: use global stmp_device functionality   Dong Aisheng
• [PATCH v2 2/5] dma: mxs-dma: make platform_device_id more generic   Dong Aisheng
• [PATCH v2 3/5] dma: mxs-dma: add device tree probe support   Dong Aisheng
• [PATCH v2 4/5] ARM: mxs: do not add dma device by default   Dong Aisheng
• [PATCH v2 5/5] ARM: mx28evk: add mxs-dma dt support   Dong Aisheng
• [PATCH v2 1/5] dma: mxs-dma: use global stmp_device functionality   Dong Aisheng
• [PATCH v2 2/5] dma: mxs-dma: make platform_device_id more generic   Dong Aisheng
• [PATCH RESEND 0/5] Adopt pinctrl support for a few outstanding imx drivers   Dong Aisheng
• [alsa-devel] [PATCH RESEND 0/9] Enable pinctrl support for mach-mxs   Dong Aisheng
• [PATCH RESEND 0/5] Adopt pinctrl support for a few outstanding imx drivers   Dong Aisheng
• [alsa-devel] [PATCH RESEND 0/9] Enable pinctrl support for mach-mxs   Dong Aisheng
• [PATCH RESEND 1/5] tty: serial: imx: adopt pinctrl support   Dong Aisheng
• [PATCH RESEND 2/5] net: fec: adopt pinctrl support   Dong Aisheng
• [PATCH RESEND 3/5] can: flexcan: adopt pinctrl support   Dong Aisheng
• [PATCH RESEND 4/5] i2c: imx: adopt pinctrl support   Dong Aisheng
• [PATCH RESEND 5/5] spi/imx: adopt pinctrl support   Dong Aisheng
• [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support   Dong Aisheng
• [PATCH V2 04/11] ARM: dts: imx6q-sabrelite: add audmux pinctrl support   Dong Aisheng
• [PATCH V2 09/11] ARM: dts: imx6q-sabrelite: add serial2 pinctrl support   Dong Aisheng
• [PATCH V2 02/11] ARM: dts: imx6q-sabrelite: add i2c1 pinctrl support   Dong Aisheng
• [alsa-devel] [PATCH 1/6] ASoC: mxs: add __devinit for mxs_saif_probe   Dong Aisheng
• [alsa-devel] [PATCH 2/6] ASoC: mxs: use devm_clk_get for mxs_saif_probe   Dong Aisheng
• [alsa-devel] [PATCH 3/6] ASoC: mxs: mxs-pcm does not need to be a plaform_driver   Dong Aisheng
• [alsa-devel] [PATCH 4/6] ASoC: mxs: add device tree support for mxs-saif   Dong Aisheng
• [alsa-devel] [PATCH 5/6] ASoC: mxs: add device tree support for mxs-sgtl5000   Dong Aisheng
• [alsa-devel] [PATCH 6/6] ARM: dts: enable audio support for imx28-evk   Dong Aisheng
• [alsa-devel] [PATCH 5/6] ASoC: mxs: add device tree support for mxs-sgtl5000   Dong Aisheng
• [PATCH 3/3] mmc: sdhci-imx-esdhc: convert to use pinctrl subsystem   Dong Aisheng
• [PATCH 1/5] pinctrl: a minor error checking improvement for pinconf   Dong Aisheng
• [PATCH 2/5] pinctrl: make pinmux disable function optional   Dong Aisheng
• [PATCH 3/5] pinctrl: pinctrl-imx: remove empty pinmux disable function   Dong Aisheng
• [PATCH 4/5] pinctrl: pinctrl-mxs: remove empty pinmux disable function   Dong Aisheng
• [PATCH 5/5] pinctrl: pinctrl-pxa3xx: remove empty pinmux disable function   Dong Aisheng
• [PATCH 1/2] pinctrl: pinctrl-imx: add imx53 pinctrl driver   Dong Aisheng
• [PATCH 1/2] pinctrl: pinctrl-imx: add imx53 pinctrl driver   Dong Aisheng
• [PATCH] pinctrl: mxs: add gpio range support   Dong Aisheng
• [PATCH 1/2] pinctrl: pinctrl-imx: add imx53 pinctrl driver   Dong Aisheng
• [PATCH RFC 1/1] pinctrl: improve gpio support for dt   Dong Aisheng
• [PATCH 1/2] pinctrl: pinctrl-imx: add imx53 pinctrl driver   Dong Aisheng
• [PATCH 1/2] pinctrl: pinctrl-imx: add imx53 pinctrl driver   Dong Aisheng
• [PATCH RFC 1/1] pinctrl: improve gpio support for dt   Dong Aisheng
• [PATCH] pinctrl: mxs: add gpio range support   Dong Aisheng
• [PATCH RFC 1/1] pinctrl: improve gpio support for dt   Dong Aisheng
• [PATCH RFC v2 1/2] pinctrl: add pinctrl_add_gpio_ranges function   Dong Aisheng
• [PATCH RFC v2 2/2] pinctrl: add pinctrl gpio binding support   Dong Aisheng
• [PATCH RFC v2 2/2] pinctrl: add pinctrl gpio binding support   Dong Aisheng
• [PATCH RFC v2 2/2] pinctrl: add pinctrl gpio binding support   Dong Aisheng
• [PATCH RFC v2 2/2] pinctrl: add pinctrl gpio binding support   Dong Aisheng
• [PATCH RFC v2 2/2] pinctrl: add pinctrl gpio binding support   Dong Aisheng
• [PATCH RFC v3 1/3] pinctrl: remove pinctrl_remove_gpio_range   Dong Aisheng
• [PATCH RFC v3 2/3] pinctrl: add pinctrl_add_gpio_ranges function   Dong Aisheng
• [PATCH RFC v3 3/3] pinctrl: add pinctrl gpio binding support   Dong Aisheng
• [PATCH RFC v3 3/3] pinctrl: add pinctrl gpio binding support   Dong Aisheng
• [PATCH RFC v3 3/3] pinctrl: add pinctrl gpio binding support   Dong Aisheng
• [PATCH RFC v3 3/3] pinctrl: add pinctrl gpio binding support   Dong Aisheng
• [PATCH RFC v3 3/3] pinctrl: add pinctrl gpio binding support   Dong Aisheng
• [PATCH RFC v3 3/3] pinctrl: add pinctrl gpio binding support   Dong Aisheng
• [PATCH v4 1/6] gpio: fix a typo of comment message   Dong Aisheng
• [PATCH v4 2/6] gpio: re-add of_node_to_gpiochip function   Dong Aisheng
• [PATCH v4 3/6] of: release node fix for of_parse_phandle_with_args   Dong Aisheng
• [PATCH v4 4/6] gpio: introduce lock mechanism for gpiochip_find   Dong Aisheng
• [PATCH v4 5/6] of: add of_parse_phandle_with_args_ext function   Dong Aisheng
• [PATCH v4 6/6] pinctrl: add pinctrl gpio binding support   Dong Aisheng
• [PATCH v4 2/6] gpio: re-add of_node_to_gpiochip function   Dong Aisheng
• [PATCH v4 4/6] gpio: introduce lock mechanism for gpiochip_find   Dong Aisheng
• [PATCH v4 6/6] pinctrl: add pinctrl gpio binding support   Dong Aisheng
• [PATCH v4 6/6] pinctrl: add pinctrl gpio binding support   Dong Aisheng
• [PATCH v4 6/6] pinctrl: add pinctrl gpio binding support   Dong Aisheng
• [PATCH v4 4/6] gpio: introduce lock mechanism for gpiochip_find   Dong Aisheng
• [PATCH v4 6/6] pinctrl: add pinctrl gpio binding support   Dong Aisheng
• [PATCH V2 0/1] dmaengine/amba-pl08x: Add support for s3c64xx DMAC   Alim Akhtar
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Lior Amsalem
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Lior Amsalem
• [PATCH 2/8] arm: mach-armada: add source files   Lior Amsalem
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Lior Amsalem
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Lior Amsalem
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Lior Amsalem
• [PATCH] clk: Use a separate struct for holding init data.   Domenico Andreoli
• [PATCH] clk: Use a separate struct for holding init data.   Domenico Andreoli
• Linux Kernel boot up stops after message "Uncompressing Linux....done, booting the kernel"   Domenico Andreoli
• [RFC 0/6] RFC: ARM: Disintegrating mach/uncompress.h: low-level debug   Domenico Andreoli
• [RFC 1/6] From: Domenico Andreoli <domenico.andreoli at linux.com> ARM: Inject the Earlycon drivers into the decompressor   Domenico Andreoli
• [RFC 2/6] From: Domenico Andreoli <domenico.andreoli at linux.com> ARM: Add Earlycon support to the decompressor   Domenico Andreoli
• [RFC 3/6] From: Domenico Andreoli <domenico.andreoli at linux.com> ARM: Earlycon support for AMBA PL010 UARTs   Domenico Andreoli
• [RFC 4/6] From: Domenico Andreoli <domenico.andreoli at linux.com> ARM: Earlycon support for AMBA PL011 UARTs   Domenico Andreoli
• [RFC 5/6] From: Domenico Andreoli <domenico.andreoli at linux.com> ARM: Earlycon support for Samsung UARTs   Domenico Andreoli
• [RFC 6/6] From: Domenico Andreoli <domenico.andreoli at linux.com> ARM: Earlycon support for OMAP UARTs   Domenico Andreoli
• [RFC PATCH 0/6] ARM: Disintegrating mach/uncompress.h: low-level debug   Domenico Andreoli
• [RFC PATCH 1/6] From: Domenico Andreoli <cavokz at gmail.com> ARM: Inject the Earlycon drivers into the decompressor   Domenico Andreoli
• [RFC PATCH 2/6] From: Domenico Andreoli <cavokz at gmail.com> ARM: Add Earlycon support to the decompressor   Domenico Andreoli
• [RFC PATCH 3/6] From: Domenico Andreoli <cavokz at gmail.com> ARM: Earlycon support for AMBA PL010 UARTs   Domenico Andreoli
• [RFC PATCH 4/6] From: Domenico Andreoli <cavokz at gmail.com> ARM: Earlycon support for AMBA PL011 UARTs   Domenico Andreoli
• [RFC PATCH 5/6] From: Domenico Andreoli <cavokz at gmail.com> ARM: Earlycon support for Samsung UARTs   Domenico Andreoli
• [RFC PATCH 6/6] From: Domenico Andreoli <cavokz at gmail.com> ARM: Earlycon support for OMAP UARTs   Domenico Andreoli
• [PATCH] ARM: dma-mapping: use PMD size for section unmap   Vitaly Andrianov
• [PATCH] ARM: LPAE: fix access flag setup in mem_type_table   Vitaly Andrianov
• [PATCH] ARM: LPAE: fix access flag setup in mem_type_table   Vitaly Andrianov
• [PATCH V3 00/10] PM: Create the AVS(Adaptive Voltage Scaling)   AnilKumar, Chimata
• [PATCH V3 04/10] ARM: OMAP3: hwmod: rename the smartreflex entries   AnilKumar, Chimata
• [PATCH V3 05/10] ARM: OMAP2+: SmartReflex: introduce a busy loop condition test macro   AnilKumar, Chimata
• [PATCH V3 05/10] ARM: OMAP2+: SmartReflex: introduce a busy loop condition test macro   AnilKumar, Chimata
• [PATCH V3 00/10] PM: Create the AVS(Adaptive Voltage Scaling)   AnilKumar, Chimata
• [PATCH] [ARM] Unconditional call to smp_cross_call on UP crashes   Pantelis Antoniou
• [PATCH] [ARM] Unconditional call to smp_cross_call on UP crashes   Pantelis Antoniou
• [PATCH] [ARM] Unconditional call to smp_cross_call on UP crashes   Pantelis Antoniou
• [PATCH] [ARM] Unconditional call to smp_cross_call on UP crashes (take #2)   Pantelis Antoniou
• [PATCH] lib/decompress_unxz.c: removing all memory helper functions   H. Peter Anvin
• [PATCH] lib/decompress_unxz.c: removing all memory helper functions   H. Peter Anvin
• [PATCH] lib/decompress_unxz.c: removing all memory helper functions   H. Peter Anvin
• [PATCH] lib/decompress_unxz.c: removing all memory helper functions   H. Peter Anvin
• [PATCH] lib/decompress_unxz.c: removing all memory helper functions   H. Peter Anvin
• A good sub-architecture to base new ports on?   Jorge Amorós Argos
• A good sub-architecture to base new ports on?   Jorge Amorós Argos
• [PATCH 0/5] ARM: at91: moving at91 to the common clk framework   Boris BREZILLON
• [PATCH 1/5] ARM: at91: Add PMC registers definitions.   Boris BREZILLON
• [PATCH 2/5] ARM: at91: Implementation of PMC clks using the common clk framework.   Boris BREZILLON
• [PATCH 3/5] ARM: at91: disable specific soc clock init functions   Boris BREZILLON
• [PATCH 4/5] ARM: at91: add pmc clks definition into device tree   Boris BREZILLON
• [PATCH 5/5] ARM: at91: Modify board_dt init sequence   Boris BREZILLON
• [PATCH 1/1] ARM: kirkwood: Add support for RaidSonic   Simon Baatz
• mv_cesa dcache problem since 2.6.37 was: Re: mv_cesa hash functions   Simon Baatz
• mv_cesa dcache problem since 2.6.37 was: Re: mv_cesa hash functions   Simon Baatz
• [RFC/PATCH 0/1] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Simon Baatz
• [RFC/PATCH 1/1] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Simon Baatz
• [RFC/PATCH 1/1] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Simon Baatz
• [RFC/PATCH 1/1] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Simon Baatz
• [patch v2 3/3] kirkwood: Add iconnect support   Adam Baker
• [PATCH 6/8] CI13xxx: Add i.MX233/i.MX28 binding code   Felipe Balbi
• [PATCH] usb: gadget: at91_udc: fix endpoint descriptor dereference   Felipe Balbi
• [PATCH v1 4/7] usb: chipidea: add imx driver binding   Felipe Balbi
• [PATCH 6/8] CI13xxx: Add i.MX233/i.MX28 binding code   Felipe Balbi
• [PATCH v2 01/12] usb: otg: add notify_connect_change callback   Felipe Balbi
• [PATCH v2 01/12] usb: otg: add notify_connect_change callback   Felipe Balbi
• [PATCH 1/4] ARM: OMAP3: There is no FS USB controller on omap3   Felipe Balbi
• [PATCH 2/4] ARM: OMAP2: Remove legacy USB FS support   Felipe Balbi
• [PATCH 3/4] ARM: OMAP: Make FS USB omap1 only   Felipe Balbi
• [PATCH 4/4] USB: Remove omap2 support from omap_udc.c   Felipe Balbi
• [PATCH v2 05/12] usb: chipidea: add imx driver binding   Felipe Balbi
• [PATCH v2 05/12] usb: chipidea: add imx driver binding   Felipe Balbi
• [PATCH v2 05/12] usb: chipidea: add imx driver binding   Felipe Balbi
• [PATCH v2 05/12] usb: chipidea: add imx driver binding   Felipe Balbi
• [PATCH] mmc: omap: Fix a section warning regression   Felipe Balbi
• [RFC PATCH 10/11] omap4: thermal: add basic CPU thermal zone   Felipe Balbi
• Regression for non-eMMC cards with commit fa550189?   Felipe Balbi
• Regression for non-eMMC cards with commit fa550189?   Felipe Balbi
• [RFC PATCH] clk: add extension API   Felipe Balbi
• [RFC PATCH] clk: add extension API   Felipe Balbi
• [RFC PATCH] clk: add extension API   Felipe Balbi
• [RFC PATCH] clk: add extension API   Felipe Balbi
• [RFC PATCH] clk: add extension API   Felipe Balbi
• [PATCH 6.2/7] MMC: mmci: Enable Device Tree support for ux500   Chris Ball
• [PATCH 6.2/7] MMC: mmci: Enable Device Tree support for ux500   Chris Ball
• [PATCH 4/9] mmc: mxs-mmc: adopt pinctrl support   Chris Ball
• [PATCH 6.2/7] MMC: mmci: Enable Device Tree support for ux500   Chris Ball
• [PATCH 6.2/7] MMC: mmci: Enable Device Tree support for ux500   Chris Ball
• [PATCH 6.2/7] MMC: mmci: Enable Device Tree support for ux500   Chris Ball
• [PATCH 08/10] mmc: mxs-mmc: add device tree support   Chris Ball
• [GIT PULL] mxs device tree support for v3.5   Chris Ball
• [PATCH 08/10] mmc: mxs-mmc: add device tree support   Chris Ball
• [GIT PULL] mxs device tree support for v3.5   Chris Ball
• [PATCH v2] mmc: dt: Consolidate DT bindings   Chris Ball
• [PATCH v2] mmc: dt: Consolidate DT bindings   Chris Ball
• [PATCH 0/4] mmc: atmel-mci: add support for old mci IPs   Chris Ball
• [PATCH 2/2] mmc: at91-mci: this driver is now deprecated   Chris Ball
• [PATCH 2/2] mmc: at91-mci: this driver is now deprecated   Chris Ball
• [PATCH 4/4] MXS-MMC: Add wp-inverted property   Chris Ball
• [PATCH] mmc: mxs-mmc: Add wp-inverted property   Chris Ball
• [PATCH 3/4] MXS-MMC: Move of_match_table out of CONFIG_PM   Chris Ball
• [PATCH v4 1/3] mmc: atmel-mci: add device tree support   Chris Ball
• [PATCH 3/9] ARM: mmp: support DT in irq   Chris Ball
• [PATCH 3/9] ARM: mmp: support DT in irq   Chris Ball
• [PATCH 3/9] ARM: mmp: support DT in irq   Chris Ball
• [PATCH 1/2] cs89x0_platform : Use ioread16/iowrite16 instead of inw/outw   Jaccon Bastiaansen
• [PATCH] CS89x0 : Use ioread16/iowrite16 on all platforms   Jaccon Bastiaansen
• [PATCH V2] CS89x0 : Use ioread16/iowrite16 on all platforms   Jaccon Bastiaansen
• [PATCH V3] CS89x0 : Use ioread16/iowrite16 on all platforms   Jaccon Bastiaansen
• Kernel 3.4 error on Dreamplug: [vectors]: mlock failed: Cannot allocate memory   Thiago Jung Bauermann
• Kernel 3.4 error on Dreamplug: [vectors]: mlock failed: Cannot allocate memory   Thiago Jung Bauermann
• Kernel 3.4 error on Dreamplug: [vectors]: mlock failed: Cannot allocate memory   Thiago Jung Bauermann
• Kernel 3.4 error on Dreamplug: [vectors]: mlock failed: Cannot allocate memory   Thiago Jung Bauermann
• [RFC PATCH 00/11] OMAP System Control Module   Konstantin Baydarov
• [RFC PATCH 04/11] OMAP: Add early device for system control module   Konstantin Baydarov
• [RFC PATCH 04/11] OMAP: Add early device for system control module   Konstantin Baydarov
• [RFC PATCH 00/11] OMAP System Control Module   Konstantin Baydarov
• [RFC PATCH 09/11] ARM: OMAP4+: thermal: introduce bandgap temperature sensor   Konstantin Baydarov
• [RFC PATCH 11/11] ARM: DT: Add support to system control module for OMAP4   Konstantin Baydarov
• [RFC PATCH 03/11] arm: omap: device: create a device for system control module   Konstantin Baydarov
• [RFC PATCH 11/11] ARM: DT: Add support to system control module for OMAP4   Konstantin Baydarov
• [RFC PATCH 11/11] ARM: DT: Add support to system control module for OMAP4   Konstantin Baydarov
• [RFC PATCH 11/11] ARM: DT: Add support to system control module for OMAP4   Konstantin Baydarov
• [RFC PATCH 11/11] ARM: DT: Add support to system control module for OMAP4   Konstantin Baydarov
• [PATCH 0/2] OMAP: mailbox initial device tree support   Bedia, Vaibhav
• [PATCHv4 6/8] ARM: OMAP4: PM: support ret_logic/mem_off_counters   Bedia, Vaibhav
• [PATCHv4 6/8] ARM: OMAP4: PM: support ret_logic/mem_off_counters   Bedia, Vaibhav
• [PATCH 01/19] ARM: OMAP4: PM: save/restore all DPLL settings in OFF mode   Bedia, Vaibhav
• [PATCH 01/19] ARM: OMAP4: PM: save/restore all DPLL settings in OFF mode   Bedia, Vaibhav
• [PATCH 01/19] ARM: OMAP4: PM: save/restore all DPLL settings in OFF mode   Bedia, Vaibhav
• [PATCH 01/19] ARM: OMAP4: PM: save/restore all DPLL settings in OFF mode   Bedia, Vaibhav
• [PATCH 01/19] ARM: OMAP4: PM: save/restore all DPLL settings in OFF mode   Bedia, Vaibhav
• [PATCH 01/19] ARM: OMAP4: PM: save/restore all DPLL settings in OFF mode   Bedia, Vaibhav
• [PATCH 2/5] ARM: OMAP2+: PM: use the power domains registers cache for the power states   Bedia, Vaibhav
• [PATCH] net: davinci_emac: Add pre_open, post_stop platform callbacks   Bedia, Vaibhav
• [PATCH] net: davinci_emac: Add pre_open, post_stop platform callbacks   Bedia, Vaibhav
• [PATCH] net: davinci_emac: Add pre_open, post_stop platform callbacks   Bedia, Vaibhav
• [PATCH] net: davinci_emac: Add pre_open, post_stop platform callbacks   Bedia, Vaibhav
• [PATCH] ARM: imx: rename uart and fec device tree nodes   Dirk Behme
• [PATCH] ARM: imx: rename uart and fec device tree nodes   Dirk Behme
• [PATCH] ARM: imx: rename uart and fec device tree nodes   Dirk Behme
• Booting mx31 on linux-next-20120517   Dirk Behme
• [PATCH v2 00/12] add imx usb driver for mx28/6x   Dirk Behme
• [RFC PATCH 00/11 V7] MXS: Add i.MX28 USB Host driver   Juergen Beisert
• [PATCH v2 3/3] omap: remoteproc: add support for a boot register   Ohad Ben-Cohen
• [PATCH v2 2/3] OMAP4: iommu: fix irq and clock name for dsp-iommu   Ohad Ben-Cohen
• [PATCH v2 1/3] omap: mailbox: enable mailbox irq per instance   Ohad Ben-Cohen
• [PATCH v2 3/3] omap: remoteproc: add support for a boot register   Ohad Ben-Cohen
• [PATCH v2 1/3] omap: mailbox: enable mailbox irq per instance   Ohad Ben-Cohen
• [PATCH v3 2/2] omap4: iommu: fix irq and clock name for dsp-iommu   Ohad Ben-Cohen
• [PATCH v3 1/2] omap: mailbox: enable mailbox irq per instance   Ohad Ben-Cohen
• [PATCH v4 1/2] omap: mailbox: enable mailbox irq per instance   Ohad Ben-Cohen
• [PATCH] ARM: OMAP4: hwspinlocks_init() should be static   Ohad Ben-Cohen
• [PATCH] remoteproc: fix off-by-one bug in __rproc_free_vrings   Ohad Ben-Cohen
• [GIT PULL] remoteproc for 3.4   Ohad Ben-Cohen
• [GIT PULL] misc omap fixes for 3.5   Ohad Ben-Cohen
• [PATCH 1/7] remoteproc: resource table overhaul   Ohad Ben-Cohen
• [PATCH] remoteproc: allocate vrings on demand, free when not needed   Ohad Ben-Cohen
• [PATCH 1/7] remoteproc: resource table overhaul   Ohad Ben-Cohen
• [PATCH] iommu/core: pass a user-provided token to fault handlers   Ohad Ben-Cohen
• [PATCH 1/7] remoteproc: resource table overhaul   Ohad Ben-Cohen
• [PATCH] remoteproc/omap: fix dev_err typo   Ohad Ben-Cohen
• [PATCH 1/7] remoteproc: resource table overhaul   Ohad Ben-Cohen
• [PATCH] remoteproc: block premature rproc booting   Ohad Ben-Cohen
• [PATCH 1/7] remoteproc: resource table overhaul   Ohad Ben-Cohen
• [PATCH] remoteproc: block premature rproc booting   Ohad Ben-Cohen
• [PATCH 1/2] remoteproc: maintain a generic child device for each rproc   Ohad Ben-Cohen
• [PATCH 2/2] remoteproc: remove the now-redundant kref   Ohad Ben-Cohen
• [PATCH 1/2] remoteproc: maintain a generic child device for each rproc   Ohad Ben-Cohen
• [PATCH 2/2] remoteproc: remove the now-redundant kref   Ohad Ben-Cohen
• [GIT PULL] ARM: SPEAr13xx support for 3.5   Arnd Bergmann
• Request for inclusion of ep93xx tree in linux-next   Arnd Bergmann
• [GIT PULL] ARM: SPEAr13xx support for 3.5   Arnd Bergmann
• [GIT PULL] ARM: spear-soc clock updates for 3.5   Arnd Bergmann
• [PATCH 00/15] arch/arm/mach-* late_initcall cleanup   Arnd Bergmann
• Request for inclusion of ep93xx tree in linux-next   Arnd Bergmann
• [PATCH 3/9] ARM: mmp: support DT in irq   Arnd Bergmann
• [PATCH 2/9] ARM: mmp: distinguish mmp and mmp2 in Kconfig   Arnd Bergmann
• [PATCH] maintainership update for the Marvell Orion family of SOCs   Arnd Bergmann
• [PATCH] clk: Use a separate struct for holding init data.   Arnd Bergmann
• [PATCH 00/15] arch/arm/mach-* late_initcall cleanup   Arnd Bergmann
• [GIT PULL] i.MX cleanups for 3.5   Arnd Bergmann
• [GIT PULL] defconfig updates for 3.5   Arnd Bergmann
• [GIT PULL] ux500-core for ARM SoC   Arnd Bergmann
• [PATCH 1/2] SPEAr: Add SMI NOR partition info in dts files   Arnd Bergmann
• [PATCH 7.2/15] ARM: ux500: Disable SMSC911x platform code registration when DT is enabled   Arnd Bergmann
• Making ARM multiplatform kernels DT-only?   Arnd Bergmann
• Making ARM multiplatform kernels DT-only?   Arnd Bergmann
• [PATCHv3 1/4] ARM: tegra: Add Tegra AHB driver   Arnd Bergmann
• [PATCH 1/1] ARM: tegra: Add Tegra Memory Controller(MC) driver   Arnd Bergmann
• [PATCH 1/2] cs89x0_platform : Use ioread16/iowrite16 instead of inw/outw   Arnd Bergmann
• Making ARM multiplatform kernels DT-only?   Arnd Bergmann
• Making ARM multiplatform kernels DT-only?   Arnd Bergmann
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH 3/9] ARM: mmp: support DT in irq   Arnd Bergmann
• [PATCH v8] gpio: Device tree support for LPC32xx   Arnd Bergmann
• [PATCH RESEND v5] rtc: Add device tree support for LPC32xx   Arnd Bergmann
• [PATCH 01/02] mach-shmobile: Emma Mobile EV2 SoC base support   Arnd Bergmann
• [PATCH 02/02] mach-shmobile: KZM9D board prototype support   Arnd Bergmann
• [PATCH v2 0/9] support dt for mmp2   Arnd Bergmann
• [RFC] Remove support for ARMv3 ARM610 and ARM710 CPUs   Arnd Bergmann
• Making ARM multiplatform kernels DT-only?   Arnd Bergmann
• [RFC] Remove support for ARMv3 ARM610 and ARM710 CPUs   Arnd Bergmann
• [RFC] Remove support for ARMv3 ARM610 and ARM710 CPUs   Arnd Bergmann
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Arnd Bergmann
• Making ARM multiplatform kernels DT-only?   Arnd Bergmann
• Making ARM multiplatform kernels DT-only?   Arnd Bergmann
• Making ARM multiplatform kernels DT-only?   Arnd Bergmann
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Arnd Bergmann
• Handling of modular boards   Arnd Bergmann
• [PATCH 01/02] mach-shmobile: Emma Mobile EV2 SoC base support   Arnd Bergmann
• [PATCH 00/02] mach-shmobile: Emma Mobile EV2 - first shot   Arnd Bergmann
• [PATCH 01/15] i2c/busses: Add Device Tree support to the Nomadik I2C driver   Arnd Bergmann
• [PATCH 06/15] mfd/ab8500: Remove confusing ab8500-i2c file and merge into ab8500-core   Arnd Bergmann
• [PATCH 00/15] DT enablement for Snowball   Arnd Bergmann
• Handling of modular boards   Arnd Bergmann
• Handling of modular boards   Arnd Bergmann
• Making ARM multiplatform kernels DT-only?   Arnd Bergmann
• [PATCH 00/02] mach-shmobile: Emma Mobile EV2 - first shot   Arnd Bergmann
• Making ARM multiplatform kernels DT-only?   Arnd Bergmann
• [PATCH 00/02] mach-shmobile: Emma Mobile EV2 - first shot   Arnd Bergmann
• [PATCH 00/02] mach-shmobile: Emma Mobile EV2 - first shot   Arnd Bergmann
• [PATCHv5 1/3] ARM: tegra: Add Tegra AHB driver   Arnd Bergmann
• [PATCHv5 1/3] ARM: tegra: Add Tegra AHB driver   Arnd Bergmann
• [PATCH 2/2] ARM: mmp: add io head file   Arnd Bergmann
• [PATCH 1/2] mfd: max8925: request resource region   Arnd Bergmann
• [PATCHv5 1/3] ARM: tegra: Add Tegra AHB driver   Arnd Bergmann
• [PATCH 1/2] mfd: max8925: request resource region   Arnd Bergmann
• [PATCH 1/2] mfd: max8925: request resource region   Arnd Bergmann
• [PATCH 1/2] mfd: max8925: request resource region   Arnd Bergmann
• [RFC 4/5] pinctrl: SPEAr: Add gpio ranges support   Arnd Bergmann
• ARM: ux500: !CONFIG_OF build error drivers/gpio/gpio-nomadik.c   Arnd Bergmann
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH 1/2] mfd: max8925: request resource region   Arnd Bergmann
• [PATCH 2/5] ARM: S3C24XX: move plat-s3c24xx/irq.c into common.c   Arnd Bergmann
• [PATCH] ARM: BCMRING: fix IO mem static mapping   Arnd Bergmann
• [PATCH 14/15] drivers/regulators: Enable the ab8500 for Device Tree   Arnd Bergmann
• [PATCH 14/15] drivers/regulators: Enable the ab8500 for Device Tree   Arnd Bergmann
• [PATCH 1/2] mfd: max8925: request resource region   Arnd Bergmann
• [PATCH 01/02] mach-shmobile: Emma Mobile EV2 SoC base support   Arnd Bergmann
• [PATCH 00/02] mach-shmobile: Emma Mobile EV2 - first shot   Arnd Bergmann
• [PATCH 11/15] drivers/mfd: Enable Device Tree for ab8500-core driver   Arnd Bergmann
• [PATCH] mach-shmobile: Emma Mobile EV2 SMP prototype code   Arnd Bergmann
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH 1/2] mfd: max8925: request resource region   Arnd Bergmann
• [PATCH] mach-shmobile: Emma Mobile EV2 SMP prototype code   Arnd Bergmann
• ARM: ux500: !CONFIG_OF build error drivers/gpio/gpio-nomadik.c   Arnd Bergmann
• [PATCH] mach-shmobile: Emma Mobile EV2 SMP prototype code   Arnd Bergmann
• [PATCH 1/2] mfd: max8925: request resource region   Arnd Bergmann
• [PATCHv3] Add ADC driver for Atmel G20, G45 and X5 boards   Arnd Bergmann
• [PATCHv3] Add ADC driver for Atmel G20, G45 and X5 boards   Arnd Bergmann
• [PATCH 1/2] mfd: max8925: request resource region   Arnd Bergmann
• [PATCH 1/2] mfd: max8925: request resource region   Arnd Bergmann
• [PATCH 1/2] mfd: max8925: request resource region   Arnd Bergmann
• [PATCH v2] ARM: DT: Add binding for GIC virtualization extentions (VGIC)   Arnd Bergmann
• [PATCH v2] ARM: DT: Add binding for GIC virtualization extentions (VGIC)   Arnd Bergmann
• [PATCH v9 00/19] Introduce a led trigger for CPU activity and consolidate LED driver in ARM   Arnd Bergmann
• [PATCH v2] ARM: DT: Add binding for GIC virtualization extentions (VGIC)   Arnd Bergmann
• [PATCH v2] ARM: DT: Add binding for GIC virtualization extentions (VGIC)   Arnd Bergmann
• [PATCHv3] Add ADC driver for Atmel G20, G45 and X5 boards   Arnd Bergmann
• [PATCHv2 0/3] Add support for DRM display subsystem   Arnd Bergmann
• [PATCH 02/12] pinctrl: basic Nomadik pinctrl interface   Arnd Bergmann
• [PATCH 02/12] pinctrl: basic Nomadik pinctrl interface   Arnd Bergmann
• [PATCH RESEND v8] gpio: Device tree support for LPC32xx   Arnd Bergmann
• [PATCH RESEND v8] gpio: Device tree support for LPC32xx   Arnd Bergmann
• [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support   Arnd Bergmann
• [PATCH] ARM: clps711x: Using a single definition for the PHYS and VIRT registers offset   Arnd Bergmann
• [PATCH 0/5] more clk-next fixes   Arnd Bergmann
• [GIT PULL] i.MX common clock support   Arnd Bergmann
• [GIT PULL] mxs common clk porting for v3.5   Arnd Bergmann
• [GIT PULL] i.MX common clock support   Arnd Bergmann
• [PATCH v9 2/2] gpio: Device tree support for LPC32xx   Arnd Bergmann
• [PATCH v9 00/19] Introduce a led trigger for CPU activity and consolidate LED driver in ARM   Arnd Bergmann
• [GIT PULL] SPEAr pinctrl updates for v-3.5   Arnd Bergmann
• [PATCH v2] mmc: dt: Consolidate DT bindings   Arnd Bergmann
• [PATCH] CS89x0 : Use ioread16/iowrite16 on all platforms   Arnd Bergmann
• Making ARM multiplatform kernels DT-only?   Arnd Bergmann
• [PATCH 14/15] drivers/regulators: Enable the ab8500 for Device Tree   Arnd Bergmann
• [PATCH 1/4] ARM: clps711x: Used own subarch directory for store header file   Arnd Bergmann
• [GIT PULL] ARM: tegra: dt2 branch   Arnd Bergmann
• [GIT PULL] ARM: tegra: defconfig2 branch   Arnd Bergmann
• [PATCH] clkdev: Add default clkdev.h   Arnd Bergmann
• [GIT PULL] cleanup samsung plat-s3c24xx and s5p for v3.5   Arnd Bergmann
• [GIT PULL][for 3.5] request pull of power branch in arch-pxa   Arnd Bergmann
• [GIT PULL][for 3.5] pull request of dt branch in arch-pxa   Arnd Bergmann
• [PATCH v2] mmc: dt: Consolidate DT bindings   Arnd Bergmann
• [GIT PULL] Samsung boards update for v3.5   Arnd Bergmann
• [PATCH 1/4] ARM: clps711x: Used own subarch directory for store header file   Arnd Bergmann
• [GIT PULL] ARM: tegra: dt2 branch   Arnd Bergmann
• [GIT PULL] ARM: orion/dove: v3.4 fixes   Arnd Bergmann
• [GIT PULL] ARM: orion/dove: v3.4 fixes   Arnd Bergmann
• [GIT PULL] ARM: tegra: for-3.5/ahb branch   Arnd Bergmann
• [PATCH 03/03] ARM: Undelete KZM9D mach-type   Arnd Bergmann
• [PATCH 03/03] ARM: Undelete KZM9D mach-type   Arnd Bergmann
• [GIT PULL][Update] Renesas ARM-based platforms: new boards support for v3.5   Arnd Bergmann
• [GIT PULL] ARM: Kirkwood: new boards for v3.5   Arnd Bergmann
• [GIT PULL][for 3.5] pull request of board-specific branch in arch-pxa git tree   Arnd Bergmann
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Arnd Bergmann
• [PATCH 00/12] pinctrl for Ux500 and Nomadik family   Arnd Bergmann
• [GIT PULL][for 3.5] pull request of board-specific branch in arch-pxa git tree   Arnd Bergmann
• [GIT PULL] ARM: tegra: dt2 branch   Arnd Bergmann
• [GIT PULL][for 3.5] pull request of board-specific branch in arch-pxa git tree   Arnd Bergmann
• [PATCH 00/12] pinctrl for Ux500 and Nomadik family   Arnd Bergmann
• [PATCH 00/12] pinctrl for Ux500 and Nomadik family   Arnd Bergmann
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Arnd Bergmann
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Arnd Bergmann
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Arnd Bergmann
• [GIT PULL] cleanup samsung plat-s3c24xx and s5p for v3.5   Arnd Bergmann
• [GIT PULL] Samsung devel-1 for v3.5   Arnd Bergmann
• [PATCH] ARM: PRIMA2: add prima2_defconfig for CSR SiRFprimaII   Arnd Bergmann
• [PATCH] ARM: PRIMA2: select PINCTRL and PINCTRL_SIRF in Kconfig   Arnd Bergmann
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Arnd Bergmann
• [GIT PULL][Update] Renesas ARM-based platforms: new boards support for v3.5   Arnd Bergmann
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Arnd Bergmann
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Arnd Bergmann
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Arnd Bergmann
• [PATCH 03/03] ARM: Undelete KZM9D mach-type   Arnd Bergmann
• [GIT PULL] ARM: tegra: dt2 branch   Arnd Bergmann
• [PATCH 1/2] ARM: clps711x: Cleanup IRQ handling   Arnd Bergmann
• [PATCH 2/2] ARM: clps711x: Added support for CPU frequencies other than 73 MHz   Arnd Bergmann
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Arnd Bergmann
• [PATCH 03/03] ARM: Undelete KZM9D mach-type   Arnd Bergmann
• [GIT PULL] Renesas ARM-based platforms: new boards support for v3.5   Arnd Bergmann
• [GIT PULL][Update] Renesas ARM-based platforms: new boards support for v3.5   Arnd Bergmann
• [PATCH V2] CS89x0 : Use ioread16/iowrite16 on all platforms   Arnd Bergmann
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Arnd Bergmann
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Arnd Bergmann
• [PATCH V2] CS89x0 : Use ioread16/iowrite16 on all platforms   Arnd Bergmann
• linux-next: manual merge of the arm-soc tree with the staging tree   Arnd Bergmann
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Arnd Bergmann
• linux-next: manual merge of the arm-soc tree with the staging tree   Arnd Bergmann
• linux-next: manual merge of the arm-soc tree with the staging tree   Arnd Bergmann
• [GIT PULL] Samsung devel-2 for v3.5   Arnd Bergmann
• linux-next: manual merge of the arm-soc tree with the staging tree   Arnd Bergmann
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Arnd Bergmann
• A good sub-architecture to base new ports on?   Arnd Bergmann
• [GIT PULL][for 3.5] clk-next update   Arnd Bergmann
• [PATCH] ARM: at91: Add ADC driver to at91sam9260/at91sam9g20 dtsi files   Arnd Bergmann
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Arnd Bergmann
• Compile err with raumfeld_defconfig   Arnd Bergmann
• [GIT PULL] Samsung devel-2 for v3.5   Arnd Bergmann
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Arnd Bergmann
• [GIT PULL][for 3.5] clk-next update   Arnd Bergmann
• A good sub-architecture to base new ports on?   Arnd Bergmann
• [PATCH 12/18] ARM: ux500: Disable platform setup of the ab8500 when DT is enabled   Arnd Bergmann
• [PATCH 00/18] DT enablement for Snowball   Arnd Bergmann
• [PATCH 12/18] ARM: ux500: Disable platform setup of the ab8500 when DT is enabled   Arnd Bergmann
• [PATCH 12/18] ARM: ux500: Disable platform setup of the ab8500 when DT is enabled   Arnd Bergmann
• [PATCH] ARM: at91: Add ADC driver to at91sam9260/at91sam9g20 dtsi files   Arnd Bergmann
• A good sub-architecture to base new ports on?   Arnd Bergmann
• [PATCH 12/18] ARM: ux500: Disable platform setup of the ab8500 when DT is enabled   Arnd Bergmann
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Arnd Bergmann
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Arnd Bergmann
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Arnd Bergmann
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Arnd Bergmann
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Arnd Bergmann
• [PATCH 09/16] ARM: ux500: Provide regulator support for SMSC911x via Device Tree   Arnd Bergmann
• kirkwood, nand, clocks and device-tree   Arnd Bergmann
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Arnd Bergmann
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Arnd Bergmann
• [PATCH] ixp4xx: fix compilation by adding gpiolib support   Arnd Bergmann
• [PATCH] ixp4xx: fix compilation by adding gpiolib support   Arnd Bergmann
• [PATCH] ixp4xx: fix compilation by adding gpiolib support   Arnd Bergmann
• [PATCH] ixp4xx: fix compilation by adding gpiolib support   Arnd Bergmann
• [PATCH 6/6] serial: add amba-pl011-pci   Arnd Bergmann
• [PATCH 6/6] serial: add amba-pl011-pci   Arnd Bergmann
• [PATCH RFC] serial/8250: Adjusting FIFO parameters for LPC32xx   Arnd Bergmann
• [PATCH RFC] serial/8250: Adjusting FIFO parameters for LPC32xx   Arnd Bergmann
• [PATCH RFC] serial/8250: Adjusting FIFO parameters for LPC32xx   Arnd Bergmann
• [PATCH 1/2] serial/8250: Add LPC3220 standard UART type   Arnd Bergmann
• [RFC PATCH 0/5] omap: add ocp2scp as a misc driver   Arnd Bergmann
• [RFC PATCH 0/5] omap: add ocp2scp as a misc driver   Arnd Bergmann
• ARM Versatile defconfig PCI io out of range?   Arnd Bergmann
• ARM Versatile defconfig PCI io out of range?   Arnd Bergmann
• [RFC PATCH 0/5] omap: add ocp2scp as a misc driver   Arnd Bergmann
• Fwd: [PATCH] arm: Add extra clobber registers for assembly in kernel_execve   Tim Bird
• [PATCH] Consolidate stack size information into THREAD_SIZE_ORDER   Tim Bird
• [PATCH v3] mtd: gpmi: add device tree support for mx6q and mx28   Artem Bityutskiy
• [PATCH 1/2] mtd: gpmi: add device tree support to gpmi-nand   Artem Bityutskiy
• [PATCH 1/2] mtd: gpmi: add device tree support to gpmi-nand   Artem Bityutskiy
• [PATCH v2 3.4-rc6] MTD: NAND: ams-delta: fix request_mem_region() failure   Artem Bityutskiy
• [PATCH v2 3.4-rc6] MTD: NAND: ams-delta: fix request_mem_region() failure   Artem Bityutskiy
• compilation issue   Artem Bityutskiy
• [PATCH] ARM: imx6q: make ksz9021rn_phy_fixup depends on config of FEC   Artem Bityutskiy
• [PATCH v2 1/2] mtd: gpmi: add device tree support to gpmi-nand   Artem Bityutskiy
• [PATCH] mtd: m25p80: Add support for Winbond W25Q80BW   Artem Bityutskiy
• [PATCH v6] MTD: atmel_nand: Update driver to support Programmable Multibit ECC controller   Artem Bityutskiy
• [PATCH] MTD: LPC32xx SLC NAND driver   Artem Bityutskiy
• [PATCH v6] MTD: atmel_nand: Update driver to support Programmable Multibit ECC controller   Artem Bityutskiy
• [PATCH] MTD: LPC32xx SLC NAND driver   Artem Bityutskiy
• [PATCH v7 0/3] Add PMECC support for at91 nand flash driver   Artem Bityutskiy
• [PATCH v7 3/3] MTD: atmel_nand: Update driver to support Programmable Multibit ECC controller   Artem Bityutskiy
• [PATCH v7 3/3] MTD: atmel_nand: Update driver to support Programmable Multibit ECC controller   Artem Bityutskiy
• [PATCH v7 0/3] Add PMECC support for at91 nand flash driver   Artem Bityutskiy
• [PATCH v7 3/3] MTD: atmel_nand: Update driver to support Programmable Multibit ECC controller   Artem Bityutskiy
• [PATCH v7 3/3] MTD: atmel_nand: Update driver to support Programmable Multibit ECC controller   Artem Bityutskiy
• [PATCH] GPMI-NAND: Define ecc.strength   Artem Bityutskiy
• [PATCH] GPMI-NAND: Define ecc.strength   Artem Bityutskiy
• [PATCH V2] GPMI-NAND: Define ecc.strength   Artem Bityutskiy
• [PATCH 1/2] mtd mxc_nand: use 32bit copy functions   Artem Bityutskiy
• [PATCH 2/2] mtd mxc_nand: move ecc strengh setup before nand_scan_tail   Artem Bityutskiy
• [PATCH v9 1/3] MTD: at91: extract hw ecc initialization to one function and use relaxed read/write   Artem Bityutskiy
• [PATCH v9 3/3] MTD: at91: atmel_nand: Update driver to support Programmable Multibit ECC controller   Artem Bityutskiy
• [PATCH] at91: set i2c_board_info.type to "ds1339" directly   Paul Bolle
• [PATCH] Drop superfluous setting of i2c_board_info.type   Paul Bolle
• [PATCH] Drop superfluous setting of i2c_board_info.type   Paul Bolle
• [GIT PULL] DT clk binding support   Stephen Boyd
• [PATCH] remoteproc: block premature rproc booting   Stephen Boyd
• [PATCH 1/2] remoteproc: maintain a generic child device for each rproc   Stephen Boyd
• [PATCH 2/2] remoteproc: remove the now-redundant kref   Stephen Boyd
• [RFC PATCH] clk: add extension API   Stephen Boyd
• [RFC PATCH] clk: add extension API   Stephen Boyd
• [RFC PATCH] clk: add extension API   Stephen Boyd
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jassi Brar
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jassi Brar
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jassi Brar
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jassi Brar
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jassi Brar
• [PATCH 07/10] spi: s3c64xx: Remove the 'set_level' callback from controller data   Jassi Brar
• [PATCH 00/10] spi: s3c64xx: add support for device tree   Jassi Brar
• [PATCH 07/10] spi: s3c64xx: Remove the 'set_level' callback from controller data   Jassi Brar
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jassi Brar
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jassi Brar
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jassi Brar
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jassi Brar
• Why DMA PL330 peripheral transfer does not support burst request?   Jassi Brar
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jassi Brar
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jassi Brar
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jassi Brar
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jassi Brar
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jassi Brar
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jassi Brar
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jassi Brar
• Why DMA PL330 peripheral transfer does not support burst request?   Jassi Brar
• [PATCH 2/2] regulator: Add support for MAX77686.   Yadwinder Singh Brar
• [PATCH 1/2] mfd: Add support for MAX77686.   Yadwinder Singh Brar
• [PATCH 2/2] regulator: Add support for MAX77686.   Yadwinder Singh Brar
• [PATCH 2/2] regulator: Add support for MAX77686.   Yadwinder Singh Brar
• [PATCH 2/2] regulator: Add support for MAX77686.   Yadwinder Singh Brar
• [PATCH v2 0/2] regulator: Add initial suport for max77686   Yadwinder Singh Brar
• [PATCH v2 1/2] mfd: Add support for MAX77686.   Yadwinder Singh Brar
• [PATCH v2 2/2] regulator: Add support for MAX77686.   Yadwinder Singh Brar
• [PATCH v2 2/2] regulator: Add support for MAX77686.   Yadwinder Singh Brar
• [PATCH v3 1/2] mfd: Add support for MAX77686.   Yadwinder Singh Brar
• [PATCH v3 2/2] regulator: Add support for MAX77686.   Yadwinder Singh Brar
• [PATCH v3 2/2] regulator: Add support for MAX77686.   Yadwinder Singh Brar
• [PATCH v3 2/2] regulator: Add support for MAX77686.   Yadwinder Singh Brar
• [PATCH v3 2/2] regulator: Add support for MAX77686.   Yadwinder Singh Brar
• [PATCH v3 2/2] regulator: Add support for MAX77686.   Yadwinder Singh Brar
• [PATCH 06/15] ARM: msm: use machine specific hook for late init   David Brown
• [GIT PULL] msm-core changes for v3.5.   David Brown
• [PATCH v2] arm: msm: fix up very basic HTC Sapphire support   David Brown
• [PATCH v2] arm: msm: fix up very basic HTC Sapphire support   David Brown
• [PATCH v2] arm: msm: fix up very basic HTC Sapphire support   David Brown
• [PATCH] Removal of last remaining useless system.h includes   David Brown
• [PATCH v2] arm: msm: fix up very basic HTC Sapphire support   David Brown
• [PATCH v5 1/4] regulator: helper routine to extract regulator_init_data   David Brown
• [PATCH] clk: Use a separate struct for holding init data.   Mark Brown
• [PATCH] clk: Use a separate struct for holding init data.   Mark Brown
• [PATCH 03/11] ASoC: fsl: add sgtl5000 clock support for imx-sgtl5000   Mark Brown
• [PATCH 03/11] ASoC: fsl: add sgtl5000 clock support for imx-sgtl5000   Mark Brown
• [PATCH] clk: Use a separate struct for holding init data.   Mark Brown
• [PATCH 6.2/7] MMC: mmci: Enable Device Tree support for ux500   Mark Brown
• [GIT PULL] clk for next   Mark Brown
• Handling of modular boards   Mark Brown
• Handling of modular boards   Mark Brown
• Handling of modular boards   Mark Brown
• Handling of modular boards   Mark Brown
• Handling of modular boards   Mark Brown
• Handling of modular boards   Mark Brown
• Handling of modular boards   Mark Brown
• [PATCH 1/2] mfd: max8925: request resource region   Mark Brown
• [PATCH 1/3] regulator: add pre-regulator support for 88pm860x   Mark Brown
• [GIT PULL] clk for next   Mark Brown
• [PATCH 1/2] mfd: max8925: request resource region   Mark Brown
• [PATCH 1/2] mfd: max8925: request resource region   Mark Brown
• Cyclic DMA - callback properties and tx_status residue   Mark Brown
• [PATCH 1/2] mfd: max8925: request resource region   Mark Brown
• [PATCH RESEND 7/9] ASoC: mxs-saif: adopt pinctrl support   Mark Brown
• [PATCH 1/2] mfd: max8925: request resource region   Mark Brown
• [PATCH 1/2] mfd: max8925: request resource region   Mark Brown
• [PATCH 1/2] mfd: max8925: request resource region   Mark Brown
• [PATCH 1/2] mfd: max8925: request resource region   Mark Brown
• [PATCH 06/15] mfd/ab8500: Remove confusing ab8500-i2c file and merge into ab8500-core   Mark Brown
• [PATCH 12/15] drivers/regulator: ab8500: Split up probe() into manageable pieces   Mark Brown
• [PATCH 14/15] drivers/regulators: Enable the ab8500 for Device Tree   Mark Brown
• [PATCH 12/15] drivers/regulator: ab8500: Split up probe() into manageable pieces   Mark Brown
• [PATCH 1/2] mfd: max8925: request resource region   Mark Brown
• [PATCH 1/2] mfd: max8925: request resource region   Mark Brown
• [PATCH 1/2] mfd: max8925: request resource region   Mark Brown
• common clock framework   Mark Brown
• [PATCH 14/15] drivers/regulators: Enable the ab8500 for Device Tree   Mark Brown
• [PATCH 14/15] drivers/regulators: Enable the ab8500 for Device Tree   Mark Brown
• [PATCH 14/15] drivers/regulators: Enable the ab8500 for Device Tree   Mark Brown
• [PATCH 14/15] drivers/regulators: Enable the ab8500 for Device Tree   Mark Brown
• [PATCH 14/15] drivers/regulators: Enable the ab8500 for Device Tree   Mark Brown
• [PATCH 1/2] mfd: max8925: request resource region   Mark Brown
• [PATCH 05/10] ARM: Samsung: Update the device names for spi clock lookup   Mark Brown
• [PATCH 06/10] ARM: Samsung: Modify s3c64xx_spi{0|1|2}_set_platdata function   Mark Brown
• [PATCH 10/10] spi: s3c64xx: add device tree support   Mark Brown
• [PATCH 06/10] ARM: Samsung: Modify s3c64xx_spi{0|1|2}_set_platdata function   Mark Brown
• Cyclic DMA - callback properties and tx_status residue   Mark Brown
• [PATCH 11/15] drivers/mfd: Enable Device Tree for ab8500-core driver   Mark Brown
• [PATCH V2 06/11] ASoC: fsl_ssi: convert to use devm_clk_get   Mark Brown
• [PATCH V2 06/11] ASoC: fsl_ssi: convert to use devm_clk_get   Mark Brown
• Cyclic DMA - callback properties and tx_status residue   Mark Brown
• [PATCH 1/2] mfd: max8925: request resource region   Mark Brown
• [PATCH 05/10] ARM: Samsung: Update the device names for spi clock lookup   Mark Brown
• [PATCH 10/10] spi: s3c64xx: add device tree support   Mark Brown
• [PATCH 06/10] ARM: Samsung: Modify s3c64xx_spi{0|1|2}_set_platdata function   Mark Brown
• [PATCH 1/2] mfd: max8925: request resource region   Mark Brown
• [PATCH 1/2] mfd: max8925: request resource region   Mark Brown
• [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support   Mark Brown
• [PATCH 1/2] mfd: max8925: request resource region   Mark Brown
• [PATCH 10/10] spi: s3c64xx: add device tree support   Mark Brown
• Handling of modular boards   Mark Brown
• [PATCH 0/2] regulator: add initial suport for max77686   Mark Brown
• [PATCH 1/2] mfd: Add support for MAX77686.   Mark Brown
• [PATCH 2/2] regulator: Add support for MAX77686.   Mark Brown
• [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support   Mark Brown
• [PATCH 2/6] ASoC: mxs: use devm_clk_get for mxs_saif_probe   Mark Brown
• [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support   Mark Brown
• [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support   Mark Brown
• [PATCH 2/6] ASoC: mxs: use devm_clk_get for mxs_saif_probe   Mark Brown
• [PATCH 1/6] ASoC: mxs: add __devinit for mxs_saif_probe   Mark Brown
• [PATCH 2/2] regulator: Add support for MAX77686.   Mark Brown
• Cyclic DMA - callback properties and tx_status residue   Mark Brown
• [PATCH V2 08/11] ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000   Mark Brown
• Cyclic DMA - callback properties and tx_status residue   Mark Brown
• Cyclic DMA - callback properties and tx_status residue   Mark Brown
• Cyclic DMA - callback properties and tx_status residue   Mark Brown
• [PATCH] ASoC: fsl: fix the binding of imx-sgtl5000   Mark Brown
• [PATCH v2 0/3] Add device tree support for mxs audio   Mark Brown
• moving Tegra30 to the common clock framework   Mark Brown
• [GIT PULL] Adopt pinctrl support for imx and mxs drivers   Mark Brown
• [PATCH 05/10] ARM: Samsung: Update the device names for spi clock lookup   Mark Brown
• [PATCH 2/2] mfd: anatop: permit adata be NULL when access register   Mark Brown
• [PATCH 0/2] ARM: S3C64xx: cpuidle cleanups   Mark Brown
• [PATCH] clk: Constify struct clk_init_data   Mark Brown
• [PATCH] clk: wm831x: Add initial WM831x clock driver   Mark Brown
• [PATCH] clkdev: Add default clkdev.h   Mark Brown
• [PATCH 14/15] drivers/regulators: Enable the ab8500 for Device Tree   Mark Brown
• [PATCH 14/15] drivers/regulators: Enable the ab8500 for Device Tree   Mark Brown
• [PATCH 1/2] ARM: S3C64XX: Initial hookup for Bells module on Cragganmore   Mark Brown
• [PATCH 2/2] ARM: S3C64XX: Hook up carrier class modules on Cragganmore   Mark Brown
• [PATCH 14/15] drivers/regulators: Enable the ab8500 for Device Tree   Mark Brown
• [PATCH] clkdev: Add default clkdev.h   Mark Brown
• [PATCH 2/2] ARM: S3C64XX: Hook up carrier class modules on Cragganmore   Mark Brown
• [PATCH 2/4] ASoC: Add mc13783 codec   Mark Brown
• [PATCH 3/4] ASoC: add imx-mc13783 sound support   Mark Brown
• [PATCH] clk: wm831x: Add initial WM831x clock driver   Mark Brown
• [PATCH 2/2] regulator: Add support for MAX77686.   Mark Brown
• [PATCH] clk: wm831x: Add initial WM831x clock driver   Mark Brown
• [PATCH 1/2] ARM: s3c64xx: cpuidle - declare the states with the new api   Mark Brown
• [PATCH 2/2] ARM: s3c64xx: cpuidle - use timekeeping wrapper   Mark Brown
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Mark Brown
• [PATCH 00/18] DT enablement for Snowball   Mark Brown
• [PATCH 09/18] regulator: ab8500: Split up probe() into manageable pieces   Mark Brown
• [PATCH 11/18] regulator: Enable the ab8500 for Device Tree   Mark Brown
• [PATCH 05/16] regulator: db8500-prcmu: Separate regulator registration from probe   Mark Brown
• [PATCH 07/16] regulator: Enable Device Tree for the db8500-prcmu regulator driver   Mark Brown
• [PATCH 0/4] MC13783 sound support   Mark Brown
• [PATCH] ASoC: imx-mc13783 cleanup   Mark Brown
• [PATCH] ARM: dt: tegra: add Whistler device tree file   Mark Brown
• [PATCH v2 4/6] ARM: Samsung: Modify s3c64xx_spi{0|1|2}_set_platdata function   Mark Brown
• [PATCH v2 1/2] mfd: Add support for MAX77686.   Mark Brown
• [PATCH v2 2/2] regulator: Add support for MAX77686.   Mark Brown
• [PATCH V2 00/11] enable imx6q_sabrelite sgtl5000 audio support   Mark Brown
• [PATCH v3 0/2] regulator: Add initial suport for max77686   Mark Brown
• [PATCH V2 00/11] enable imx6q_sabrelite sgtl5000 audio support   Mark Brown
• [PATCH v3 2/2] regulator: Add support for MAX77686.   Mark Brown
• [PATCH 3/4] ASOC: mmp: add sspa support   Mark Brown
• [PATCH 4/4] ASoC: add mmp brownstone support   Mark Brown
• [alsa-devel] [PATCH 2/4] ASoC: mmp: add audio dma support   Mark Brown
• [alsa-devel] [PATCH 2/4] ASoC: mmp: add audio dma support   Mark Brown
• [alsa-devel] [PATCH 2/4] ASoC: mmp: add audio dma support   Mark Brown
• [PATCH v2 4/6] ARM: Samsung: Modify s3c64xx_spi{0|1|2}_set_platdata function   Mark Brown
• [PATCH 08/22] regulator: Change ab8500 match names to reflect Device Tree   Mark Brown
• [PATCH v2 4/6] ARM: Samsung: Modify s3c64xx_spi{0|1|2}_set_platdata function   Mark Brown
• [PATCH 08/22] regulator: Change ab8500 match names to reflect Device Tree   Mark Brown
• [PATCH 08/22] regulator: Change ab8500 match names to reflect Device Tree   Mark Brown
• [PATCH 08/22] regulator: Change ab8500 match names to reflect Device Tree   Mark Brown
• [PATCH 2/2] MFD: mc13xxx workaround SPI hardware bug on i.Mx   Mark Brown
• [PATCH 1/2] ARM: S3C64XX: Add module identification for Balblair Cragganmore module   Mark Brown
• [PATCH 2/2] ARM: S3C64XX: Add WM5102 EVM to Cragganmore modules   Mark Brown
• [PATCH] slimbus: Linux driver framework for SLIMbus.   Mark Brown
• [PATCH v2 4/6] ARM: Samsung: Modify s3c64xx_spi{0|1|2}_set_platdata function   Mark Brown
• [RFC PATCH] clk: add extension API   Mark Brown
• [RFC PATCH] clk: add extension API   Mark Brown
• [RFC PATCH] clk: add extension API   Mark Brown
• [PATCH 2/2] MFD: mc13xxx workaround SPI hardware bug on i.Mx   Mark Brown
• [PATCH] ARM: Enable I$/D$/BrPredict based on config   Bryan Buckley
• [PATCH] ARM: Enable I$/D$/BrPredict based on config   Buckley, Bryan
• [PATCH] ARM: Enable I$/D$/BrPredict based on config   Buckley, Bryan
• [PATCH] ARM: decompressor: Fix mmu mapping for non-DRAM address space.   Buckley, Bryan
• [PATCH] ARM: decompressor: Fix mmu mapping for non-DRAM address space.   Buckley, Bryan
• [PATCH 1/1] ARM: imx6q: prepare and enable init on clks directly instead of clk_get first   Buddhi
• [PATCH 1/1] ARM: imx6q: prepare and enable init on clks directly instead of clk_get first   Buddhi
• [PATCH] slimbus: Linux driver framework for SLIMbus.   Marc Butler
• [PATCH 1/2] usb: fsl_mxc_udc.c: add workaround for ENGcm09152 for i.MX25   Eric Bénard
• [PATCH 2/2] usb: fsl_mxc_udc.c: fix mxc_ahb_clk disable for i.MX25   Eric Bénard
• [PATCH 01/12] ARM: imx: eukrea_cpuimx25: enable workaround ENGcm09152   Eric Bénard
• [PATCH 02/12] ARM: imx: eukrea_mbimxsd25: add spi controler and spidev support   Eric Bénard
• [PATCH 03/12] ARM: imx: eukrea_cpuimx25: add watchdog support   Eric Bénard
• [PATCH 04/12] ARM: imx: eukrea_mbimxsd35: add spi controler and spidev support   Eric Bénard
• [PATCH 05/12] ARM: imx: eukrea-cpuimx51: remove board   Eric Bénard
• [PATCH 06/12] ARM: imx: eukrea_cpuimx51sd: add watchdog support   Eric Bénard
• [PATCH 07/12] ARM: imx: eukrea_mbimxsd: add audio support   Eric Bénard
• [PATCH 08/12] ARM: imx: eukrea_cpuimx51sd: support rev2 PCB   Eric Bénard
• [PATCH 09/12] ARM: imx: eukrea_mbimxsd: add backlight and lcd support   Eric Bénard
• [PATCH 10/12] ARM: imx: eukrea_mbimxsd25: don't free twice GPIO_SWITCH1   Eric Bénard
• [PATCH 11/12] ARM: imx: eukrea_mbimxsd25: use IMX_GPIO_NR   Eric Bénard
• [PATCH 12/12] ARM: imx: eukrea_mbimxsd rename to eukrea_mbimxsd51   Eric Bénard
• [RFC PATCH] ARM: imx: add PM support to i.MX25   Eric Bénard
• [PATCH 2/8] arm: mach-armada: add source files   Gregory CLEMENT
• [PATCH] ARM: mach-pxa: Use REGULATOR_SUPPLY macro   Jonathan Cameron
• [PATCH 1/9] ARM: AT91: Add platform data for the AT91 ADCs   Jonathan Cameron
• [PATCH 2/9] ARM: AT91: IIO: Add AT91 ADC driver.   Jonathan Cameron
• [PATCH 6/9] IIO: AT91: Add DT support to at91_adc driver   Jonathan Cameron
• [PATCHv3] Add ADC driver for Atmel G20, G45 and X5 boards   Jonathan Cameron
• arm: Remaining issue with alignment of __log_buf in printk.c   Jonathan Cameron
• arm: Remaining issue with alignment of __log_buf in printk.c   Jonathan Cameron
• arm: Remaining issue with alignment of __log_buf in printk.c   Jonathan Cameron
• [RESEND PATCH 1/2] ARM: OMAP2+: nand: Make board_onenand_init() visible to board code   Javier Martinez Canillas
• Running linux with mmu disabled on arm (AT91).   Paul Chavent
• [uClinux-dev] Running linux with mmu disabled on arm (AT91).   Paul Chavent
• i.MX USB Re-Structure   Peter Chen
• [PATCH v1 2/7] usb: chipidea: remove zero check of hw_ep_max   Peter Chen
• [PATCH v1 0/7] preliminary work for adding imx6q_sabrelite usb support   Peter Chen
• [PATCH 5/8] MXS: Add USB PHY driver   Peter Chen
• mm: fix faulty initialization in vmalloc_init()   KyongHo Cho
• mm: fix faulty initialization in vmalloc_init()   KyongHo Cho
• [PATCH 1/2] mfd: Add support for MAX77686.   Chanwoo Choi
• [PATCH] mmc: dw_mmc: make multiple instances of dw_mci_card_workqueue   Jaehoon Chung
• [PATCH 4/7] mmc: dw_mmc: add samsung exynos5250 specific extentions   Jaehoon Chung
• [PATCH 4/7] mmc: dw_mmc: add samsung exynos5250 specific extentions   Jaehoon Chung
• [PATCH v2 6/6] mmc: dw_mmc: add samsung exynos5250 specific extentions   Jaehoon Chung
• [PATCH v2 1/6] mmc: dw_mmc: convert copy of struct device in struct dw_mci to a reference   Jaehoon Chung
• [PATCH 1/2] DRM: add Freescale i.MX LCDC driver   Rob Clark
• Cyclic DMA - callback properties and tx_status residue   Lars-Peter Clausen
• Cyclic DMA - callback properties and tx_status residue   Lars-Peter Clausen
•   Lars-Peter Clausen
• [PATCH 1/2] DRM: add Freescale i.MX LCDC driver   Lars-Peter Clausen
• [alsa-devel] [PATCH 2/4] ASoC: mmp: add audio dma support   Lars-Peter Clausen
• [PATCH 0/4] ARM: orion5x: ts78xx misc cleanups   Alexander Clouter
• [PATCH 1/4] ARM: orion5x: ts78xx whitespace cleanups   Alexander Clouter
• [PATCH 2/4 V2] ARM: orion5x: ts78xx fix NAND resource off by one   Alexander Clouter
• [PATCH 3/4] v2: ARM: orion5x: ts78xx debugging changes   Alexander Clouter
• [PATCH 4/4] ARM: orion5x: remove PM dependency from ts78xx   Alexander Clouter
• [PATCH] ixp4xx: fix compilation by adding gpiolib support   Richard Cochran
• [PATCH] ixp4xx: fix compilation by adding gpiolib support   Richard Cochran
• [PATCH] ixp4xx: fix compilation by adding gpiolib support   Richard Cochran
• [PATCH] ixp4xx: fix compilation by adding gpiolib support   Richard Cochran
• [PATCH] ixp4xx: fix compilation by adding gpiolib support   Richard Cochran
• [PATCH] ixp4xx: fix compilation by adding gpiolib support   Richard Cochran
• [PATCH] Avoid needing export of include/asm-generic/kvm_para.h   William Cohen
• [PATCH] Avoid needing export of include/asm-generic/kvm_para.h   William Cohen
• [PATCH] lib/decompress_unxz.c: removing all memory helper functions   Lasse Collin
• [PATCH] lib/decompress_unxz.c: removing all memory helper functions   Lasse Collin
• [PATCH] ARM: kirkwood: add missing kexec.h include   Jason Cooper
• [PATCHv2] ARM: orion5x: Fix GPIO enable bits for MPP9   Jason Cooper
• [GIT PULL] ARM: kirkwood: fixes for v3.4   Jason Cooper
• [patch v2 3/3] kirkwood: Add iconnect support   Jason Cooper
• [GIT PULL] ARM: orion/dove: v3.4 fixes   Jason Cooper
• [GIT PULL RESEND] ARM: mv_cesa: final fix for v3.4   Jason Cooper
• [GIT PULL] ARM: marvell: cleanup for v3.5   Jason Cooper
• [GIT PULL] ARM: Kirkwood: new boards for v3.5   Jason Cooper
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Jason Cooper
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Jason Cooper
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Jason Cooper
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Jason Cooper
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Jason Cooper
• kirkwood, nand, clocks and device-tree   Jason Cooper
• kirkwood, nand, clocks and device-tree   Jason Cooper
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Jason Cooper
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Jason Cooper
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Jason Cooper
• kirkwood, nand, clocks and device-tree   Jason Cooper
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Jason Cooper
• kirkwood, nand, clocks and device-tree   Jason Cooper
• kirkwood, nand, clocks and device-tree   Jason Cooper
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Jason Cooper
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Jason Cooper
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Jason Cooper
• Kernel 3.4 error on Dreamplug: [vectors]: mlock failed: Cannot allocate memory   Jason Cooper
• Kernel 3.4 error on Dreamplug: [vectors]: mlock failed: Cannot allocate memory   Jason Cooper
• Kernel 3.4 error on Dreamplug: [vectors]: mlock failed: Cannot allocate memory   Jason Cooper
• [PATCH-V4 0/4] ARM: OMAP2+: Add voltagedomain, powerdomain & PRM support for AM33XX device   Cousson, Benoit
• [PATCH-V6 0/3] ARM: OMAP: Make OMAP clocksource source selection runtime   Cousson, Benoit
• [PATCH 10/13] ARM: OMAP5: board-generic: Add device tree support.   Cousson, Benoit
• [PATCH 12/13] ARM: OMAP5: Add the build support   Cousson, Benoit
• oprofile and ARM A9 hardware counter   Cousson, Benoit
• oprofile and ARM A9 hardware counter   Cousson, Benoit
• oprofile and ARM A9 hardware counter   Cousson, Benoit
• [PATCH 0/3] ARM: OMAP: OMAP4 DTS updates   Benoit Cousson
• [PATCH 1/3] arm/dts: twl4030: Add twl4030-gpio node   Benoit Cousson
• [PATCH 2/3] arm/dts: omap4-sdp: Add LEDs support   Benoit Cousson
• [PATCH 3/3] arm/dts: omap4-panda: Add LEDs support   Benoit Cousson
• oprofile and ARM A9 hardware counter   Cousson, Benoit
• [PATCH 3/3] ARM: OMAP: AM35xx: fix UART4 softreset   Cousson, Benoit
• [PATCH 3/3] ARM: OMAP: AM35xx: fix UART4 softreset   Cousson, Benoit
• [PATCH 3/3] ARM: OMAP: AM35xx: fix UART4 softreset   Cousson, Benoit
• [GIT PULL] ARM: OMAP2+: Add AM335x and AM3517/05 EVM DT support   Cousson, Benoit
• [PATCH 01/11] OMAP2+: Add SoC specific map_io functions   Cousson, Benoit
• [PATCH] ARM: OMAP4: PM: Keep static dep between MPUSS and ABE clockdomain   Cousson, Benoit
• [PATCH] ARM: OMAP4: PM: Keep static dep between MPUSS and ABE clockdomain   Cousson, Benoit
• [PATCHv4 4/8] ARM: OMAP4: hwmod: flag hwmods/modules supporting module level context status   Cousson, Benoit
• [PATCH 0/2] OMAP: mailbox initial device tree support   Cousson, Benoit
• [PATCH 2/2] arm/dts: OMAP2+: Add mailbox nodes   Cousson, Benoit
• [RFC PATCH 03/11] arm: omap: device: create a device for system control module   Cousson, Benoit
• [RFC PATCH 04/11] OMAP: Add early device for system control module   Cousson, Benoit
• [RFC PATCH 05/11] mfd: omap: control: core system control driver   Cousson, Benoit
• [RFC PATCH 06/11] OMAP2+: use control module mfd driver in omap_type   Cousson, Benoit
• [RFC PATCH 07/11] mfd: omap: control: usb-phy: introduce the ctrl-module usb driver   Cousson, Benoit
• [RFC PATCH 08/11] ARM: OMAP4+: Adding the temperature sensor register set bit fields   Cousson, Benoit
• [RFC PATCH 09/11] ARM: OMAP4+: thermal: introduce bandgap temperature sensor   Cousson, Benoit
• [PATCH] ARM: OMAP2+: hwmod code/data: fix 32K sync timer   Cousson, Benoit
• [RFC PATCH 10/11] omap4: thermal: add basic CPU thermal zone   Cousson, Benoit
• [RFC PATCH 09/11] ARM: OMAP4+: thermal: introduce bandgap temperature sensor   Cousson, Benoit
• [RFC PATCH 05/11] mfd: omap: control: core system control driver   Cousson, Benoit
• [RFC PATCH 05/11] mfd: omap: control: core system control driver   Cousson, Benoit
• [PATCH 3/3] watchdog: omap_wdt: add device tree support   Cousson, Benoit
• [RFC PATCH 11/11] ARM: DT: Add support to system control module for OMAP4   Cousson, Benoit
• [RFC PATCH 11/11] ARM: DT: Add support to system control module for OMAP4   Cousson, Benoit
• [RFC PATCH 11/11] ARM: DT: Add support to system control module for OMAP4   Cousson, Benoit
• [RFC PATCH 11/11] ARM: DT: Add support to system control module for OMAP4   Cousson, Benoit
• [RFC PATCH 2/5] arm: omap: remove ocp2scp_usb_phy_ick clock node   Cousson, Benoit
• [PATCH 3/3] watchdog: omap_wdt: add device tree support   Cousson, Benoit
• [RFC PATCH] clk: add extension API   Cousson, Benoit
• [RFC PATCH 11/11] ARM: DT: Add support to system control module for OMAP4   Cousson, Benoit
• [RFC PATCH] clk: add extension API   Cousson, Benoit
• [PATCH 1/3] arm/dts: add wdt node for omap3 and omap4   Cousson, Benoit
• [PATCH 1/1] ARM: tegra: Add Tegra Memory Controller(MC) driver   Alan Cox
• [PATCH 1/2] serial/8250: Add LPC3220 standard UART type   Alan Cox
• [PATCH] serial: Add driver for LPC32xx High Speed UARTs   Alan Cox
• [PATCHv3 0/5] coupled cpuidle state support   Colin Cross
• [PATCHv3 0/5] coupled cpuidle state support   Colin Cross
• [PATCHv3 5/5] cpuidle: coupled: add trace events   Colin Cross
• [linux-pm] [PATCHv3 3/5] cpuidle: add support for states that affect multiple cpus   Colin Cross
• [linux-pm] [PATCHv3 3/5] cpuidle: add support for states that affect multiple cpus   Colin Cross
• [PATCH] ARM: SMP: prevent use of the console when using idmap_pgd   Colin Cross
• [PATCH] ARM: SMP: prevent use of the console when using idmap_pgd   Colin Cross
• [PATCHv3 0/4] coupled cpuidle state support   Colin Cross
• [PATCHv4 1/4] cpuidle: refactor out cpuidle_enter_state   Colin Cross
• [PATCHv4 2/4] cpuidle: fix error handling in __cpuidle_register_device   Colin Cross
• [PATCHv4 3/4] cpuidle: add support for states that affect multiple cpus   Colin Cross
• [PATCHv4 4/4] cpuidle: coupled: add parallel barrier function   Colin Cross
• [PATCHv4 4/4] cpuidle: coupled: add parallel barrier function   Colin Cross
• [PATCH] cpu_pm: fix some typos in comments   Colin Cross
• [PATCH 0/2] bug fixes for coupled cpuidle   Colin Cross
• [PATCH 1/2] cpuidle: coupled: fix count of online cpus   Colin Cross
• [PATCH 2/2] cpuidle: coupled: fix decrementing ready count   Colin Cross
• [PATCHv3 0/4] coupled cpuidle state support   Colin Cross
• [PATCH v2] RFC: ARM: cache-l2x0: update workaround for PL310 errata 727915   Colin Cross
• [PATCH v2] RFC: ARM: cache-l2x0: update workaround for PL310 errata 727915   Colin Cross
• [PATCH v2] RFC: ARM: cache-l2x0: update workaround for PL310 errata 727915   Colin Cross
• [PATCHv9 00/10] I2C fixes   Shubhrajyoti D
• [PATCHv9 01/10] I2C: OMAP: make omap_i2c_unidle/idle functions depend on CONFIG_PM_RUNTIME   Shubhrajyoti D
• [PATCHv9 02/10] I2C: OMAP: Fix the mismatch of pm_runtime enable and disable   Shubhrajyoti D
• [PATCHv9 03/10] I2C: OMAP: Fix the interrupt clearing in OMAP4   Shubhrajyoti D
• [PATCHv9 04/10] I2C: OMAP: Prevent the register access after pm_runtime_put in probe   Shubhrajyoti D
• [PATCHv9 05/10] I2C: OMAP: Don't check if wait_for_completion_timeout() returns less than zero   Shubhrajyoti D
• [PATCHv9 06/10] I2C: OMAP: Fix the crash in i2c remove   Shubhrajyoti D
• [PATCHv9 07/10] I2C: OMAP: Handle error check for pm runtime   Shubhrajyoti D
• [PATCHv9 08/10] I2C: OMAP: prevent the overwrite of the errata flags   Shubhrajyoti D
• [PATCHv9 09/10] I2C: OMAP: Do not set the XUDF(Transmit underflow) if the underflow is not reached   Shubhrajyoti D
• [PATCHv9 10/10] I2C: OMAP: Rename the 1p153 to the erratum id i462   Shubhrajyoti D
• [PATCHv10 00/10] I2C fixes   Shubhrajyoti D
• [PATCHv10 01/10] I2C: OMAP: make omap_i2c_unidle/idle functions depend on CONFIG_PM_RUNTIME   Shubhrajyoti D
• [PATCHv10 02/10] I2C: OMAP: Fix the mismatch of pm_runtime enable and disable   Shubhrajyoti D
• [PATCHv10 03/10] I2C: OMAP: Fix the interrupt clearing in OMAP4   Shubhrajyoti D
• [PATCHv10 04/10] I2C: OMAP: Prevent the register access after pm_runtime_put in probe   Shubhrajyoti D
• [PATCHv10 05/10] I2C: OMAP: Don't check if wait_for_completion_timeout() returns less than zero   Shubhrajyoti D
• [PATCHv10 06/10] I2C: OMAP: Fix the crash in i2c remove   Shubhrajyoti D
• [PATCHv10 07/10] I2C: OMAP: Handle error check for pm runtime   Shubhrajyoti D
• [PATCHv10 08/10] I2C: OMAP: prevent the overwrite of the errata flags   Shubhrajyoti D
• [PATCHv10 09/10] I2C: OMAP: Do not set the XUDF(Transmit underflow) if the underflow is not reached   Shubhrajyoti D
• [PATCHv10 10/10] I2C: OMAP: Rename the 1p153 to the erratum id i462   Shubhrajyoti D
• [PATCHv10 00/11] I2C fixes   Shubhrajyoti D
• [PATCHv10 01/11] I2C: OMAP: make omap_i2c_unidle/idle functions depend on CONFIG_PM_RUNTIME   Shubhrajyoti D
• [PATCHv10 02/11] I2C: OMAP: Fix the mismatch of pm_runtime enable and disable   Shubhrajyoti D
• [PATCHv10 03/11] I2C: OMAP: Fix the interrupt clearing in OMAP4   Shubhrajyoti D
• [PATCHv10 04/11] I2C: OMAP: Prevent the register access after pm_runtime_put in probe   Shubhrajyoti D
• [PATCHv10 05/11] I2C: OMAP: Don't check if wait_for_completion_timeout() returns less than zero   Shubhrajyoti D
• [PATCH 06/11] I2C: OMAP: Fix the crash in i2c remove   Shubhrajyoti D
• [PATCH 07/11] I2C: OMAP: Handle error check for pm runtime   Shubhrajyoti D
• [PATCHv10 08/11] I2C: OMAP: prevent the overwrite of the errata flags   Shubhrajyoti D
• [PATCHv10 09/11] I2C: OMAP: Do not set the XUDF(Transmit underflow) if the underflow is not reached   Shubhrajyoti D
• [PATCHv10 10/11] I2C: OMAP: Rename the 1p153 to the erratum id i462   Shubhrajyoti D
• [PATCHv10 11/11] OMAP/I2C - Fix timeout problem during suspend.   Shubhrajyoti D
• [PATCHv3 1/4] ARM: tegra: Add Tegra AHB driver   Hiroshi DOYU
• [PATCHv3 2/4] ARM: tegra: Add SMMU enabler in AHB   Hiroshi DOYU
• [PATCHv3 3/4] iommu/tegra: smmu: Refrain from accessing to AHB   Hiroshi DOYU
• [PATCHv3 4/4] ARM: dt: tegra: Add device tree support for AHB   Hiroshi DOYU
• [PATCH 1/1] ARM: tegra: Add Tegra Memory Controller(MC) driver   Hiroshi DOYU
• [PATCHv5 1/3] ARM: tegra: Add Tegra AHB driver   Hiroshi DOYU
• [PATCHv5 2/3] ARM: tegra: Add SMMU enabler in AHB   Hiroshi DOYU
• [PATCHv5 3/3] ARM: dt: tegra: Add device tree support for AHB   Hiroshi DOYU
• [RFC 1/1] Driver Core: don't oops with unregistered driver in driver_find_device()   Hiroshi DOYU
• [PATCH 1/4] ARM: tegra20: Add Tegra Memory Controller(MC) driver   Hiroshi DOYU
• [PATCH 2/4] ARM: dt: tegra20.dtsi: Add Memory Controller(MC) nodes   Hiroshi DOYU
• [PATCH 3/4] ARM: tegra30: Add Tegra Memory Controller(MC) driver   Hiroshi DOYU
• [PATCH 4/4] ARM: dt: tegra30.dtsi: Add Memory Controller(MC) nodes   Hiroshi DOYU
• [PATCH 2/2] ARM: dt: tegra20.dtsi: Add GART node   Hiroshi DOYU
• [PATCH 2/2] ARM: dt: tegra30.dtsi: Add SMMU node   Hiroshi DOYU
• [PATCH 1/3] ARM: tegra20: Make MC optional in Kconfig   Hiroshi DOYU
• [PATCH 2/3] ARM: tegra30: Make MC optional in Kconfig   Hiroshi DOYU
• [PATCH 3/3] ARM: tegra: Make TEGRA{20,30}_MC selectable in defconfig   Hiroshi DOYU
• [RFC 0/2] dma-mapping: Introduce new IOVA API with address specified   Hiroshi DOYU
• [RFC 1/2] dma-mapping: Export arm_iommu_{alloc, free}_iova() functions   Hiroshi DOYU
• [RFC 2/2] dma-mapping: Enable IOVA mapping with specific address   Hiroshi DOYU
• Making ARM multiplatform kernels DT-only?   Magnus Damm
• [PATCH 00/02] mach-shmobile: Emma Mobile EV2 - first shot   Magnus Damm
• [PATCH 01/02] mach-shmobile: Emma Mobile EV2 SoC base support   Magnus Damm
• [PATCH 02/02] mach-shmobile: KZM9D board prototype support   Magnus Damm
• [PATCH 00/02] mach-shmobile: Emma Mobile EV2 - first shot   Magnus Damm
• [PATCH 01/02] mach-shmobile: Emma Mobile EV2 SoC base support   Magnus Damm
• [PATCH] mach-shmobile: Emma Mobile EV2 SMP prototype code   Magnus Damm
• [PATCH 00/02] mach-shmobile: Emma Mobile EV2 - first shot   Magnus Damm
• [PATCH] mach-shmobile: Emma Mobile EV2 SMP prototype code   Magnus Damm
• [PATCH] mach-shmobile: Emma Mobile EV2 DT prototype code   Magnus Damm
• [PATCH 00/06] mach-shmobile: Emma Mobile EV2 support V2   Magnus Damm
• [PATCH 01/06] mach-shmobile: Emma Mobile EV2 SoC base support V2   Magnus Damm
• [PATCH 02/06] mach-shmobile: KZM9D board support V2   Magnus Damm
• [PATCH 03/06] mach-shmobile: Emma Mobile EV2 SMP support V2   Magnus Damm
• [PATCH 04/06] mach-shmobile: Emma Mobile EV2 GPIO support V2   Magnus Damm
• [PATCH 05/06] mach-shmobile: KZM9D board Ethernet support V2   Magnus Damm
• [PATCH 06/06] mach-shmobile: Emma Mobile EV2 DT support V2   Magnus Damm
• [GIT PULL] Urgent fixes (for v3.4 if possible) for Renesas ARM-based platforms   Magnus Damm
• [GIT PULL] Renesas ARM-based platforms: new boards support for v3.5   Magnus Damm
• [PATCH 00/03] ARM: mach-shmobile: DT_MACHINE and mach-type updates   Magnus Damm
• [PATCH 01/03] mach-shmobile: Use DT_MACHINE for KZM9G   Magnus Damm
• [PATCH 02/03] mach-shmobile: Use DT_MACHINE for armadillo 800 eva   Magnus Damm
• [PATCH 03/03] ARM: Undelete KZM9D mach-type   Magnus Damm
• [PATCH 03/03] ARM: Undelete KZM9D mach-type   Magnus Damm
• [PATCH] Removal of last remaining useless system.h includes   Magnus Damm
• [PATCH 03/03] ARM: Undelete KZM9D mach-type   Magnus Damm
• [PATCH 03/03] ARM: Undelete KZM9D mach-type   Magnus Damm
• [PATCH 00/08] mach-shmobile: Emma Mobile EV2 support V3   Magnus Damm
• [PATCH 01/08] mach-shmobile: Emma Mobile EV2 SoC base support V3   Magnus Damm
• [PATCH 02/08] ARM: Undelete KZM9D mach-type V3   Magnus Damm
• [PATCH 03/08] mach-shmobile: KZM9D board support V3   Magnus Damm
• [PATCH 04/08] mach-shmobile: Emma Mobile EV2 SMP support V3   Magnus Damm
• [PATCH 05/08] mach-shmobile: Emma Mobile EV2 GPIO support V3   Magnus Damm
• [PATCH 06/08] mach-shmobile: KZM9D board Ethernet support V3   Magnus Damm
• [PATCH 07/08] mach-shmobile: Emma Mobile EV2 DT support V3   Magnus Damm
• [PATCH 08/08] mach-shmobile: Use DT_MACHINE for KZM9D V3   Magnus Damm
• [PATCH 01/08] mach-shmobile: Emma Mobile EV2 SoC base support V3   Magnus Damm
• [PATCH 00/08] mach-shmobile: Emma Mobile EV2 support V3   Magnus Damm
• [RFC PATCH 07/11] mfd: omap: control: usb-phy: introduce the ctrl-module usb driver   Shubhrajyoti Datta
• [PATCH] serial: samsung: protect NULL dereference of clock name   Shubhrajyoti Datta
• [PATCH] ARM: Fix restoration of IP scratch register when auditing syscalls   Will Deacon
• [PATCH] ARM: Fix restoration of IP scratch register when auditing syscalls   Will Deacon
• [PATCH] ARM: Fix restoration of IP scratch register when auditing syscalls   Will Deacon
• [PATCH] ARM: Fix restoration of IP scratch register when auditing syscalls   Will Deacon
• [PATCH 0/6] syscall_trace fixes and cleanups   Will Deacon
• [PATCH 1/6] ARM: audit: fix treatment of saved ip register during syscall tracing   Will Deacon
• [PATCH 2/6] ARM: audit: use only AUDIT_ARCH_ARM regardless of endianness   Will Deacon
• [PATCH 3/6] audit: arm: only allow syscall auditing for pure EABI userspace   Will Deacon
• [PATCH 4/6] ARM: entry: don't bother with syscall tracing on ret_from_fork path   Will Deacon
• [PATCH 5/6] ARM: audit: move syscall auditing until after ptrace SIGTRAP handling   Will Deacon
• [PATCH 6/6] ARM: ptrace: provide separate functions for tracing syscall {entry, exit}   Will Deacon
• [PATCH] ARM: 7397/1: l2x0: only apply workaround for erratum #753970 on PL310   Will Deacon
• [RFC] Remove support for ARMv3 ARM610 and ARM710 CPUs   Will Deacon
• [PATCH] ARM: SMP: prevent use of the console when using idmap_pgd   Will Deacon
• [PATCH] Prevent process migration during vfp_init()   Will Deacon
• [PATCH 09/13] ARM: OMAP5: Add SMP support.   Will Deacon
• [PATCH] Prevent process migration during vfp_init()   Will Deacon
• [PATCH] Prevent process migration during vfp_init()   Will Deacon
• [PATCH] Prevent process migration during vfp_init()   Will Deacon
• Bug in v7_coherent_kern_range() ?   Will Deacon
• oprofile and ARM A9 hardware counter   Will Deacon
• Query about: ARM11 MPCore: preemption/task migration cache coherency   Will Deacon
• oprofile and ARM A9 hardware counter   Will Deacon
• oprofile and ARM A9 hardware counter   Will Deacon
• oprofile and ARM A9 hardware counter   Will Deacon
• oprofile and ARM A9 hardware counter   Will Deacon
• [PATCH v4 2/2] ARM: vfp: clear fpscr length and stride bits on entry to sig handler   Will Deacon
• [PATCH v4 2/2] ARM: vfp: clear fpscr length and stride bits on entry to sig handler   Will Deacon
• [PATCH v4 2/2] ARM: vfp: clear fpscr length and stride bits on entry to sig handler   Will Deacon
• [PATCH v4 2/2] ARM: vfp: clear fpscr length and stride bits on entry to sig handler   Will Deacon
• oprofile and ARM A9 hardware counter   Will Deacon
• L1 & L2 cache flush sequence on CortexA5 MPcore w.r.t low power modes   Will Deacon
• [PATCH v2] RFC: ARM: cache-l2x0: update workaround for PL310 errata 727915   Will Deacon
• [PATCH v2] RFC: ARM: cache-l2x0: update workaround for PL310 errata 727915   Will Deacon
• [PATCH v2] RFC: ARM: cache-l2x0: update workaround for PL310 errata 727915   Will Deacon
• perf_event_v7.c compilation failure in next-20120523   Will Deacon
• [STABLE PATCH] ARM: 7409/1: Do not call flush_cache_user_range with mmap_sem held   Will Deacon
• [PATCH v2] RFC: ARM: cache-l2x0: update workaround for PL310 errata 727915   Will Deacon
• [PATCH v2] RFC: ARM: cache-l2x0: update workaround for PL310 errata 727915   Will Deacon
• Query about: ARM11 MPCore: preemption/task migration cache coherency   Will Deacon
• [RFC PATCH] ARM: cmpxchg: define __HAVE_ARCH_CMPXCHG for armv6 and later   Will Deacon
• [RFC PATCH 0/2] Remove at91 workaround from handle_IRQ   Will Deacon
• [RFC PATCH 1/2] ARM: at91: use EOI flow control for interrupt handling   Will Deacon
• [RFC PATCH 2/2] ARM: irq: remove unused irq_finish hook from core interrupt handling   Will Deacon
• [RFC PATCH 0/2] Remove at91 workaround from handle_IRQ   Will Deacon
• [PATCH v2] ARM: at91: aic can use fast eoi handler type   Will Deacon
• [PATCH v2] gpio/omap: fix incorrect initialization of omap_gpio_mod_init   DebBarma, Tarun Kanti
• [PATCH v2] gpio/omap: fix incorrect initialization of omap_gpio_mod_init   DebBarma, Tarun Kanti
• [PATCH] ARM: OMAP4: PM: Keep static dep between MPUSS and ABE clockdomain   Tarun Kanti DebBarma
• [PATCH 8/8] gpio/omap: fix missing check in *_runtime_suspend()   DebBarma, Tarun Kanti
• [PATCH 8/8] gpio/omap: fix missing check in *_runtime_suspend()   DebBarma, Tarun Kanti
• [PATCH 8/8] gpio/omap: fix missing check in *_runtime_suspend()   DebBarma, Tarun Kanti
• Handling of modular boards   Wolfgang Denk
• Handling of modular boards   Wolfgang Denk
• Handling of modular boards   Wolfgang Denk
• [PATCH V2 1/2] ARM: tegra: config: enable TPS65910 drivers   Laxman Dewangan
• [PATCH V2 2/2] ARM: dt: tegra: cardhu: register core regulator tps65911   Laxman Dewangan
• [PATCH] slimbus: Linux driver framework for SLIMbus.   Sagar Dharia
• [PATCH] netwinder: encapsulate CPLD hardware locking and access   Christian Dietrich
• [PATCH] ARM: OMAP: Cleanup Beagleboard DVI reset gpio   Russ Dill
• [PATCH] ARM: OMAP: Cleanup Beagleboard DVI reset gpio   Russ Dill
• [PATCH] ARM: OMAP: Cleanup Beagleboard DVI reset gpio   Russ Dill
• [PATCH v4] ARM: OMAP: Cleanup Beagleboard DVI reset gpio   Russ Dill
• [PATCH v2] OMAP2+: UART: Add mechanism to probe uart pins and configure rx wakeup   Russ Dill
• [PATCH v4] ARM: OMAP: Cleanup Beagleboard DVI reset gpio   Russ Dill
• [PATCH v5] MTD: atmel_nand: Update driver to support Programmable Multibit ECC controller   Ivan Djelic
• Handling of modular boards   Ben Dooks
• Handling of modular boards   Ben Dooks
• Making ARM multiplatform kernels DT-only?   Ben Dooks
• [GIT PULL] ARM: Kirkwood: new boards for v3.5   Ben Dooks
• [PATCH 1/8] arm: mach-armada: add headers   Ben Dooks
• [PATCH 2/8] arm: mach-armada: add source files   Ben Dooks
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Ben Dooks
• [PATCH 2/8] arm: mach-armada: add source files   Ben Dooks
• [PATCH 2/8] arm: mach-armada: add source files   Ben Dooks
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Ben Dooks
• [PATCH 7/8] arm: mach-armada: add defconfig   Ben Dooks
• [PATCH 2/8] arm: mach-armada: add source files   Ben Dooks
• [PATCH 1/8] arm: mach-armada: add headers   Ben Dooks
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Ben Dooks
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Ben Dooks
• [PATCH 3/8] arm: mach-armada: add documentation for new device tree bindings   Ben Dooks
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Ben Dooks
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Ben Dooks
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Ben Dooks
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Ben Dooks
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Ben Dooks
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Ben Dooks
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Ben Dooks
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Ben Dooks
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Ben Dooks
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Ben Dooks
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Ben Dooks
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Ben Dooks
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Ben Dooks
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Ben Dooks
• [PATCH 2/8] arm: mach-armada: add source files   Ben Dooks
• [PATCH 2/8] arm: mach-armada: add source files   Ben Dooks
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Ben Dooks
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Ben Dooks
• [PATCH 2/2] clk: Add support for rate table based dividers   Ben Dooks
• Clock register in early init   Ben Dooks
• [PATCH v2 2/2] clk: add highbank clock support   Ben Dooks
• [PATCH V2 1/3] ARM: tegra: trimslice: enable PCIe when booting from device tree   Ben Dooks
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Ben Dooks
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Ben Dooks
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Ben Dooks
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Ben Dooks
• [PATCH] Consolidate stack size information into THREAD_SIZE_ORDER   Ben Dooks
• amba, tegra-ahb and pci (Kconfig question)   Ben Dooks
• [PATCH 1/2] MXS: Set I2C timing registers for mxs-i2c   Ben Dooks
• [PATCH RFC 1/3] i2c-nomadik: move header from <plat/i2c.h> to <linux/i2c-nomadik.h>   Ben Dooks
• [PATCH RFC 1/3] i2c-nomadik: move header from <plat/i2c.h> to <linux/i2c-nomadik.h>   Ben Dooks
• [PATCH RFC 2/3] i2c-nomadik: turn the platform driver to an amba driver   Ben Dooks
• [PATCHv3 3/4] iommu/tegra: smmu: Refrain from accessing to AHB   Hiroshi Doyu
• [PATCH 1/1] ARM: tegra: Add Tegra Memory Controller(MC) driver   Hiroshi Doyu
• [PATCHv3 1/4] ARM: tegra: Add Tegra AHB driver   Hiroshi Doyu
• [PATCHv3 3/4] iommu/tegra: smmu: Refrain from accessing to AHB   Hiroshi Doyu
• [PATCHv3 3/4] iommu/tegra: smmu: Refrain from accessing to AHB   Hiroshi Doyu
• [PATCHv3 1/4] ARM: tegra: Add Tegra AHB driver   Hiroshi Doyu
• [PATCH 1/1] ARM: tegra: Add Tegra Memory Controller(MC) driver   Hiroshi Doyu
• [PATCHv3 1/4] ARM: tegra: Add Tegra AHB driver   Hiroshi Doyu
• [PATCHv5 1/3] ARM: tegra: Add Tegra AHB driver   Hiroshi Doyu
• [PATCHv5 1/3] ARM: tegra: Add Tegra AHB driver   Hiroshi Doyu
• [PATCHv5 1/3] ARM: tegra: Add Tegra AHB driver   Hiroshi Doyu
• [PATCHv5 1/3] ARM: tegra: Add Tegra AHB driver   Hiroshi Doyu
• [PATCH 3/4] ARM: tegra30: Add Tegra Memory Controller(MC) driver   Hiroshi Doyu
• [PATCH 1/4] ARM: tegra20: Add Tegra Memory Controller(MC) driver   Hiroshi Doyu
• [RFC 1/1] Driver Core: don't oops with unregistered driver in driver_find_device()   Hiroshi Doyu
• [PATCH 2/4] ARM: dt: tegra20.dtsi: Add Memory Controller(MC) nodes   Hiroshi Doyu
• [PATCH V2] GPMI-NAND: Define ecc.strength   Mike Dunn
• [PATCH 2/2] mtd mxc_nand: move ecc strengh setup before nand_scan_tail   Mike Dunn
• [GIT PULL] omap fixes for v3.4-rc6   Enrico
• [alsa-devel] [PATCH 10/11] ARM: imx6q_sabrelite: clkdev_add cko1 for sgtl5000   Fabio Estevam
• [PATCH 4/5] ARM: dts: imx51-babbage: enable audio support   Fabio Estevam
• Issues when running DT enabled kernel on iMX28 from linux-next   Fabio Estevam
• Issues when running DT enabled kernel on iMX28 from linux-next   Fabio Estevam
• Issues when running DT enabled kernel on iMX28 from linux-next   Fabio Estevam
• Booting mx31 on linux-next-20120517   Fabio Estevam
• Booting mx31 on linux-next-20120517   Fabio Estevam
• [PATCH] AMR: mx31: Add pinctrl_provide_dummies()   Fabio Estevam
• [PATCH v2] ARM: mx31: Add pinctrl_provide_dummies()   Fabio Estevam
• [PATCH] ARM: mx51: Add pinctrl_provide_dummies()   Fabio Estevam
• [PATCH] ARM: mxs: Let GPMI driver be built by default   Fabio Estevam
• Booting mx31 on linux-next-20120517   Fabio Estevam
• Booting mx31 on linux-next-20120517   Fabio Estevam
• [PATCH] ARM: mx31_3ds: Fix build due to missing IMX_HAVE_PLATFORM_IMX_SSI   Fabio Estevam
• [PATCH v2 00/12] add imx usb driver for mx28/6x   Fabio Estevam
• Booting mx31 on linux-next-20120517   Fabio Estevam
• Booting mx27 on linux-next   Fabio Estevam
• [PATCH 01/15] ARM: mx5: Use clk_prepare_enable/clk_disable_unprepare   Fabio Estevam
• [PATCH] ARM: imx_v6_v7_defconfig: Add sound support   Fabio Estevam
• [PATCH] ARM: i.MX: Keypad prepare/unprepare clock   Fabio Estevam
• [PATCH] MXS: Add DENX M28 dts file   Fabio Estevam
• [PATCH 2/3] ARM: mx28: Add SPI resources   Fabio Estevam
• [PATCH] MXS: Add DENX M28 dts file   Fabio Estevam
• [ehci-mxc] USB stopped working in i.MX27 based Visstrim_M10 board.   Fabio Estevam
• [PATCH 1/2] MFD: Fix mc13xxx SPI regmap   Fabio Estevam
• [PATCH] ARM: mxs: Enable MACH_APX4DEVKIT   Fabio Estevam
• [PATCH] USB: ohci-at91: add a reset function to fix race condition   Nicolas Ferre
• [PATCH] USB: ohci-at91: use resource_size() for memory/io resource length   Nicolas Ferre
• [PATCHv3] Add ADC driver for Atmel G20, G45 and X5 boards   Nicolas Ferre
• [PATCH] USB: ohci-at91: add a reset function to fix race condition   Nicolas Ferre
• [PATCHv3] Add ADC driver for Atmel G20, G45 and X5 boards   Nicolas Ferre
• [PATCH 0/3] dmaengine: at_hdmac: slave configuration   Nicolas Ferre
• [PATCH 1/3] dmaengine: at_hdmac: remove some at_dma_slave comments   Nicolas Ferre
• [PATCH 2/3] dmaengine: at_hdmac: remove ATC_DEFAULT_CTRLA constant   Nicolas Ferre
• [PATCH 3/3] dmaengine: at_hdmac: take maxburst from slave configuration   Nicolas Ferre
• [PATCH] usb: gadget: at91_udc: fix endpoint descriptor dereference   Nicolas Ferre
• linux-next: manual merge of the arm-soc tree with the staging tree   Nicolas Ferre
• [PATCH] ARM: at91: Add ADC driver to at91sam9260/at91sam9g20 dtsi files   Nicolas Ferre
• Duplicate labels in dts files   Nicolas Ferre
• [PATCH] ARM: at91: Add ADC driver to at91sam9260/at91sam9g20 dtsi files   Nicolas Ferre
• [PATCH 1/2] ARM: at91: add atmel-mci support for chips and boards which can use it   Nicolas Ferre
• [PATCH 2/2] mmc: at91-mci: this driver is now deprecated   Nicolas Ferre
• [PATCH v3 1/3] mmc: atmel-mci: add device tree support   Nicolas Ferre
• [PATCH v3 2/3] ARM: at91: add clocks for DT entries   Nicolas Ferre
• [PATCH v3 3/3] ARM: dts: add nodes for atmel hsmci controllers for atmel platforms   Nicolas Ferre
• [PATCH v3 1/3] mmc: atmel-mci: add device tree support   Nicolas Ferre
• [GIT PULL] at91: platform data for atmel-mci (for 3.5)   Nicolas Ferre
• [PATCH v2] ARM: at91: add atmel-mci support for chips and boards which can use it   Nicolas Ferre
• [GIT PULL] at91: platform data for atmel-mci (for 3.5)   Nicolas Ferre
• [PATCH] ARM: davinci: turn off DDR PHY when entering deep sleep   Marcus Folkesson
• [PATCH] ARM: davinci: turn off DDR PHY when entering deep sleep   Marcus Folkesson
• [PATCH] ARM: mx35: add cpufreq support   Christoph Fritz
• [PATCH] ARM: mx35: add cpufreq support   Christoph Fritz
• [PATCH] ARM: mx35: add WEIM register addresses   Christoph Fritz
• [PATCH] ARM: mx35: add cpufreq support   Christoph Fritz
• [PATCH] ARM: mx35: add cpufreq support   Christoph Fritz
• [PATCH] ARM: mx35: add cpufreq support   Christoph Fritz
• [PATCH] ARM: mx35: add cpufreq support   Christoph Fritz
• Clock register in early init   Prashant Gaikwad
• [PATCH 0/4] mmp audio support   Zhangfei Gao
• [PATCH] dmaengine: mmp_tdma: add mmp tdma support   Zhangfei Gao
• [PATCH 2/4] ASoC: mmp: add audio dma support   Zhangfei Gao
• [PATCH 3/4] ASOC: mmp: add sspa support   Zhangfei Gao
• [PATCH 4/4] ASoC: add mmp brownstone support   Zhangfei Gao
• [PATCH 1/1] Add missing include <plat/cpu.h> in drivers/mfd/omap-usb-host.c   Guillaume Gardet
• [PATCH 1/1] Add missing include <plat/cpu.h> in drivers/mfd/omap-usb-host.c   Guillaume Gardet
• [PATCH V2 1/1] Add missing include <plat/cpu.h> in drivers/mfd/omap-usb-host.c   Guillaume Gardet
• [PATCH 02/19] led-triggers: create a trigger for CPU activity   Tim Gardner
• [PATCH 02/19] led-triggers: create a trigger for CPU activity   Tim Gardner
• [PATCH v3 1/3] PATA host controller driver for ep93xx   Jeff Garzik
• [PATCH] ARM: i.MX35: Implement camera and keypad clocks   Alex Gershgorin
• [PATCH] ARM: i.MX: Keypad prepare/unprepare clock   Alex Gershgorin
• [PATCH] ARM: i.MX: Keypad prepare/unprepare clock   Alex Gershgorin
• [PATCH 2/3] IRQ: allow check_wakeup_irqs to notice level-triggered interrupts.   Thomas Gleixner
• smp_twd fix for adapting to cpu frequency change   Thomas Gleixner
• [PATCH 2/2] ARM: SMP: use per cpu state to replace   Thomas Gleixner
• [PATCH] ARM: SAMSUNG: Fix for S3C2412 EBI memory mapping.   José Miguel Gonçalves
• [PATCH] ARM: SAMSUNG: Fix for S3C2412 EBI memory mapping.   José Miguel Gonçalves
• [PATCH] usb: [ARM] fix unresolved err() reference in host/ohci-pxa27x.c   Paul Gortmaker
• [PATCH] ARM: fix swizzle build failure in integrator platform   Paul Gortmaker
• [PATCH] ARM: fix watchdog build failure in s3c2410 platform   Paul Gortmaker
• [PATCH v5 0/7] Add TI EMIF SDRAM controller driver   Paul Gortmaker
• [PATCH] ARM: BCMRING: Fix UART declaration and clk dev name mismatch   Paul Gortmaker
• [PATCH 6.2/7] MMC: mmci: Enable Device Tree support for ux500   Paul Gortmaker
• [PATCH] ARM: BCMRING: Fix UART declaration and clk dev name mismatch   Paul Gortmaker
• [PATCH 6.2/7] MMC: mmci: Enable Device Tree support for ux500   Paul Gortmaker
• [PATCH 6.2/7] MMC: mmci: Enable Device Tree support for ux500   Paul Gortmaker
• [PATCHv9 10/10] ARM: dma-mapping: add support for IOMMU mapper   Paul Gortmaker
• [PATCH] ARM: integrator: fix typo in PCI swizzle function   Paul Gortmaker
• [PATCH] ARM: integrator: fix typo in PCI swizzle function   Paul Gortmaker
• linux-next commit "ARM: dma-mapping: move all dma bounce code to separate dma ops structure"   Paul Gortmaker
• [PATCH 1/5] arm: remove ability to select CONFIG_MCA   Paul Gortmaker
• [linux-next] "clk: add non CONFIG_HAVE_CLK routines" commit   Paul Gortmaker
• Bad ux500 merge fix leads to linux-next failure   Paul Gortmaker
• [PATCH v4 0/2] ARM: omap_hwmod: add api to enable/disable module level wakeup   Govindraj.R
• [PATCH v4 1/2] ARM: OMAP2/3: omap_hwmod: Add api to enable/disable module level wakeup events   Govindraj.R
• [PATCH v4 2/2] ARM: omap3: pm: Remove uart module level wakeup configurations   Govindraj.R
• [PATCH v2] OMAP2+: UART: Add mechanism to probe uart pins and configure rx wakeup   Govindraj.R
• [PATCH v3] OMAP2+: UART: Add mechanism to probe uart pins and configure rx wakeup   Govindraj.R
• [PATCH] arm: omap: Use only valid power domain states   Mark A. Greer
• [PATCH] net: davinci_emac: Add pre_open, post_stop platform callbacks   Mark A. Greer
• [PATCH] net: davinci_emac: Add pre_open, post_stop platform callbacks   Mark A. Greer
• [PATCH] net: davinci_emac: Add pre_open, post_stop platform callbacks   Mark A. Greer
• [PATCH] net: davinci_emac: Add pre_open, post_stop platform callbacks   Mark A. Greer
• [PATCH] net: davinci_emac: Add pre_open, post_stop platform callbacks   Mark A. Greer
• [PATCH] net: davinci_emac: Add pre_open, post_stop platform callbacks   Mark A. Greer
• [PATCH] net: davinci_emac: Add pre_open, post_stop platform callbacks   Mark A. Greer
• [PATCH 0/3] ARM: OMAP: AM35xx: fix some boot warnings with AM3505/3517   Mark A. Greer
• [PATCH 1/3] ARM: OMAP AM35xx: clock and hwmod data: fix AM35xx HSOTGUSB hwmod   Mark A. Greer
• [PATCH 2/3] ARM: OMAP AM35xx: clock and hwmod data: fix UART4 data   Mark A. Greer
• [PATCH 3/3] ARM: OMAP: AM35xx: fix UART4 softreset   Mark A. Greer
• [PATCH 0/2] arm: omap3: am35x: Convert emac to hwmod & disable hlt when open   Mark A. Greer
• [PATCH 1/2] arm: omap3: am35x: Add Davinci EMAC/MDIO hwmod support   Mark A. Greer
• [PATCH 2/2] arm: omap3: am35x: Disable hlt when using Davinci EMAC   Mark A. Greer
• [PATCH 2/2] arm: omap3: am35x: Disable hlt when using Davinci EMAC   Mark A. Greer
• [PATCH] arm: omap3: am35x: Set proper powerdomain states   Mark A. Greer
• [PATCH 2/2] arm: omap3: am35x: Disable hlt when using Davinci EMAC   Mark A. Greer
• [PATCH v2 0/2] arm: omap3: am35x: Convert emac to hwmod & disable hlt when open   Mark A. Greer
• [PATCH v2 1/2] arm: omap3: am35x: Add Davinci EMAC/MDIO hwmod support   Mark A. Greer
• [PATCH v2 2/2] arm: omap3: am35x: Disable hlt when using Davinci EMAC   Mark A. Greer
• [PATCH] arm: omap3: am35x: Set proper powerdomain states   Mark A. Greer
• [PATCH] arm: omap3: am35x: Set proper powerdomain states   Mark A. Greer
• [PATCH v2] arm: omap3: am35x: Set proper powerdomain states   Mark A. Greer
• [PATCH] ARM: OMAP3: cm-t35: add support for power off   Igor Grinberg
• [PATCH] ARM: mach-pxa: Use REGULATOR_SUPPLY macro   Igor Grinberg
• Handling of modular boards   Igor Grinberg
• Handling of modular boards   Igor Grinberg
• [PATCH 2/2] arm: omap3: am35x: Disable hlt when using Davinci EMAC   Igor Grinberg
• [PATCH 2/2] arm: omap3: am35x: Disable hlt when using Davinci EMAC   Igor Grinberg
• Some questions in v6_copy_user_highpage_aliasing   Gavin Guo
• [PATCH v2 1/3] mtd: gpmi: add device tree support for mx6q and mx28   Shawn Guo
• [PATCH] clk: Use a separate struct for holding init data.   Shawn Guo
• [GIT PULL] ARM: spear-soc clock updates for 3.5   Shawn Guo
• [PATCH V3 1/8] CLKDEV: Add helper routines to allocate and add clkdevs for given struct clk *   Shawn Guo
• [PATCH 10/11] ARM: imx6q_sabrelite: clkdev_add cko1 for sgtl5000   Shawn Guo
• [PATCH 11/11] ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000   Shawn Guo
• [PATCH] arm/imx6: Add debug UART2   Shawn Guo
• [PATCH 05/11] ARM: imx6q: move imx6q_sabrelite specific code to a dedicated function   Shawn Guo
• [PATCH 06/11] ARM: dts: imx6q-sabrelite: add ssi device   Shawn Guo
• [PATCH 15/17] ARM: shmobile: use machine specific hook for late init   Shawn Guo
• [PATCH 03/11] ASoC: fsl: add sgtl5000 clock support for imx-sgtl5000   Shawn Guo
• [PATCH 2/2] I2C: Implement DMA support into mxs-i2c   Shawn Guo
• [PATCH 2/2] I2C: Implement DMA support into mxs-i2c   Shawn Guo
• [PATCH 1/2] ARM: imx6q-sabrelite.dts: Add SPI NOR support   Shawn Guo
• [PATCH 10/11] ARM: imx6q_sabrelite: clkdev_add cko1 for sgtl5000   Shawn Guo
• [PATCH v4 4/4] mmc: sdhci-imx-esdhc: convert to use pinctrl subsystem   Shawn Guo
• [PATCH] clk: Use a separate struct for holding init data.   Shawn Guo
• [PATCH 06/11] ARM: dts: imx6q-sabrelite: add ssi device   Shawn Guo
• [PATCH v2 0/3] Add imx cpuidle   Shawn Guo
• [PATCH v2 1/3] ARM: imx: Add common imx cpuidle init functionality.   Shawn Guo
• [PATCH v2 3/3] ARM: imx: Add imx6q cpuidle driver   Shawn Guo
• [PATCH v4 4/4] mmc: sdhci-imx-esdhc: convert to use pinctrl subsystem   Shawn Guo
• [alsa-devel] [PATCH 10/11] ARM: imx6q_sabrelite: clkdev_add cko1 for sgtl5000   Shawn Guo
• [PATCH v2 1/3] mtd: gpmi: add device tree support for mx6q and mx28   Shawn Guo
• [PATCH 02/17] ARM: at91: use machine specific hook for late init   Shawn Guo
• [PATCH 00/15] arch/arm/mach-* late_initcall cleanup   Shawn Guo
• [PATCH 01/15] ARM: provide a late_initcall hook for platform initialization   Shawn Guo
• [PATCH 02/15] ARM: davinci: use machine specific hook for late init   Shawn Guo
• [PATCH 03/15] ARM: ep93xx: use machine specific hook for late init   Shawn Guo
• [PATCH 04/15] ARM: exynos: use machine specific hook for late init   Shawn Guo
• [PATCH 05/15] ARM: imx: use machine specific hook for late init   Shawn Guo
• [PATCH 06/15] ARM: msm: use machine specific hook for late init   Shawn Guo
• [PATCH 07/15] ARM: omap1: use machine specific hook for late init   Shawn Guo
• [PATCH 08/15] ARM: omap2: use machine specific hook for late init   Shawn Guo
• [PATCH 09/15] ARM: pnx4008: use machine specific hook for late init   Shawn Guo
• [PATCH 10/15] ARM: prima2: use machine specific hook for late init   Shawn Guo
• [PATCH 11/15] ARM: s3c64xx: use machine specific hook for late init   Shawn Guo
• [PATCH 12/15] ARM: sa1100: use machine specific hook for late init   Shawn Guo
• [PATCH 13/15] ARM: shmobile: use machine specific hook for late init   Shawn Guo
• [PATCH 14/15] ARM: tegra: use machine specific hook for late init   Shawn Guo
• [PATCH 15/15] ARM: ux500: use machine specific hook for late init   Shawn Guo
• [PATCH 03/11] ASoC: fsl: add sgtl5000 clock support for imx-sgtl5000   Shawn Guo
• [PATCH 01/15] ARM: provide a late_initcall hook for platform initialization   Shawn Guo
• [PATCH 00/15] arch/arm/mach-* late_initcall cleanup   Shawn Guo
• [PATCH v2 3/3] ARM: imx: Add imx6q cpuidle driver   Shawn Guo
• [PATCH V3 1/8] CLKDEV: Add helper routines to allocate and add clkdevs for given struct clk *   Shawn Guo
• [PATCH v2 1/3] ARM: imx: Add common imx cpuidle init functionality.   Shawn Guo
• [PATCH 09/11] ARM: imx6q: add ssi1 clk_lookup   Shawn Guo
• [PATCH v3] mtd: gpmi: add device tree support for mx6q and mx28   Shawn Guo
• [PATCH 31/33] ARM i.MX5: implement clocks using common clock framework   Shawn Guo
• [PATCH v3] mtd: gpmi: add device tree support for mx6q and mx28   Shawn Guo
• [PATCH v3] mtd: gpmi: add device tree support for mx6q and mx28   Shawn Guo
• [PATCH 01/15] ARM: provide a late_initcall hook for platform initialization   Shawn Guo
• [PATCH 03/15] ARM: ep93xx: use machine specific hook for late init   Shawn Guo
• [GIT PULL] arch/arm/mach-* late_initcall cleanup   Shawn Guo
• [PATCH v3] mtd: gpmi: add device tree support for mx6q and mx28   Shawn Guo
• [PATCH] ARM: imx: rename uart and fec device tree nodes   Shawn Guo
• [PATCH] ARM: imx: rename uart and fec device tree nodes   Shawn Guo
• [PATCH 1/2] ARM: mxs: add initial device tree support for imx23-evk board   Shawn Guo
• [PATCH 2/2] ARM: mxs: always build in device tree support   Shawn Guo
• [PATCH v2 2/5] dma: mxs-dma: make platform_device_id more generic   Shawn Guo
• [PATCH v2 1/5] dma: mxs-dma: use global stmp_device functionality   Shawn Guo
• [PATCH 1/2 RESEND] ARM: mxs: add initial device tree support for imx23-evk board   Shawn Guo
• [PATCH 0/4] Add device tree support for gpio-mxs   Shawn Guo
• [PATCH 1/4] gpio/mxs: use devm_* helpers to make error handling simple   Shawn Guo
• [PATCH 2/4] gpio/mxs: get rid of the use of cpu_is_xxx   Shawn Guo
• [PATCH 3/4] gpio/mxs: add device tree probe   Shawn Guo
• [PATCH 4/4] ARM: mxs: add gpio support for device tree boot   Shawn Guo
• [GIT PULL] clk for next   Shawn Guo
• [PATCH 00/15] arch/arm/mach-* late_initcall cleanup   Shawn Guo
• [PATCH 02/15] ARM: davinci: use machine specific hook for late init   Shawn Guo
• [GIT PULL] arch/arm/mach-* late_initcall cleanup   Shawn Guo
• [GIT PULL] clk for next   Shawn Guo
• [PATCH v2 2/5] dma: mxs-dma: make platform_device_id more generic   Shawn Guo
• [PATCH 0/5] Adopt pinctrl API for a few outstanding imx drivers   Shawn Guo
• [PATCH 1/5] tty: serial: imx: adopt pinctrl API   Shawn Guo
• [PATCH 2/5] net: fec: adopt pinctrl API   Shawn Guo
• [PATCH 3/5] can: flexcan: adopt pinctrl API   Shawn Guo
• [PATCH 4/5] i2c: imx: adopt pinctrl API   Shawn Guo
• [PATCH 5/5] spi/imx: adopt pinctrl API   Shawn Guo
• [PATCH 0/5] Adopt pinctrl API for a few outstanding imx drivers   Shawn Guo
• [PATCH 1/5] tty: serial: imx: adopt pinctrl API   Shawn Guo
• [PATCH 1/3] ARM: imx: enable pinctrl dummy states   Shawn Guo
• [PATCH 0/9] Enable pinctrl support for mach-mxs   Shawn Guo
• [PATCH 1/9] ARM: mxs: enable pinctrl dummy states   Shawn Guo
• [PATCH 2/9] serial: amba-pl011: adopt pinctrl support   Shawn Guo
• [PATCH 3/9] serial: mxs-auart: adopt pinctrl support   Shawn Guo
• [PATCH 4/9] mmc: mxs-mmc: adopt pinctrl support   Shawn Guo
• [PATCH 5/9] mtd: nand: gpmi: adopt pinctrl support   Shawn Guo
• [PATCH 6/9] i2c: mxs: adopt pinctrl support   Shawn Guo
• [PATCH 7/9] ASoC: mxs-saif: adopt pinctrl support   Shawn Guo
• [PATCH 8/9] video: mxsfb: adopt pinctrl support   Shawn Guo
• [PATCH 9/9] ARM: mxs: enable pinctrl support   Shawn Guo
• [PATCH 2/5] net: fec: adopt pinctrl API   Shawn Guo
• [PATCH 2/5] net: fec: adopt pinctrl API   Shawn Guo
• [PATCH RESEND 0/5] Adopt pinctrl support for a few outstanding imx drivers   Shawn Guo
• [PATCH RESEND 1/5] tty: serial: imx: adopt pinctrl support   Shawn Guo
• [PATCH RESEND 2/5] net: fec: adopt pinctrl support   Shawn Guo
• [PATCH RESEND 3/5] can: flexcan: adopt pinctrl support   Shawn Guo
• [PATCH RESEND 4/5] i2c: imx: adopt pinctrl support   Shawn Guo
• [PATCH RESEND 5/5] spi/imx: adopt pinctrl support   Shawn Guo
• [PATCH 4/9] mmc: mxs-mmc: adopt pinctrl support   Shawn Guo
• [PATCH RESEND 0/9] Enable pinctrl support for mach-mxs   Shawn Guo
• [PATCH RESEND 1/9] ARM: mxs: enable pinctrl dummy states   Shawn Guo
• [PATCH RESEND 2/9] serial: amba-pl011: adopt pinctrl support   Shawn Guo
• [PATCH RESEND 3/9] serial: mxs-auart: adopt pinctrl support   Shawn Guo
• [PATCH RESEND 4/9] mmc: mxs-mmc: adopt pinctrl support   Shawn Guo
• [PATCH RESEND 5/9] mtd: nand: gpmi: adopt pinctrl support   Shawn Guo
• [PATCH RESEND 6/9] i2c: mxs: adopt pinctrl support   Shawn Guo
• [PATCH RESEND 7/9] ASoC: mxs-saif: adopt pinctrl support   Shawn Guo
• [PATCH RESEND 8/9] video: mxsfb: adopt pinctrl support   Shawn Guo
• [PATCH RESEND 9/9] ARM: mxs: enable pinctrl support   Shawn Guo
• [PATCH v2 2/5] dma: mxs-dma: make platform_device_id more generic   Shawn Guo
• [PATCH v2 2/5] dma: mxs-dma: make platform_device_id more generic   Shawn Guo
• [PATCH RESEND 0/5] Adopt pinctrl support for a few outstanding imx drivers   Shawn Guo
• [alsa-devel] [PATCH RESEND 0/9] Enable pinctrl support for mach-mxs   Shawn Guo
• [PATCH RESEND 3/5] can: flexcan: adopt pinctrl support   Shawn Guo
• [PATCH] ARM: imx: rename uart and fec device tree nodes   Shawn Guo
• [GIT PULL] mxs: device tree support for v3.5   Shawn Guo
• [PATCH 0/3] Initial device tree support for mxs   Shawn Guo
• [PATCH 1/3] ARM: mxs: add initial device tree support for imx28-evk board   Shawn Guo
• [PATCH 2/3] ARM: mxs: add initial device tree support for imx23-evk board   Shawn Guo
• [PATCH 3/3] ARM: mxs: always build in device tree support   Shawn Guo
• [PATCH 0/6] Add device tree support for mxs-dma   Shawn Guo
• [PATCH 1/6] dma: mxs-dma: use global stmp_device functionality   Shawn Guo
• [PATCH 2/6] dma: mxs-dma: let dma_is_apbh and apbh_is_old take parameter   Shawn Guo
• [PATCH 3/6] dma: mxs-dma: make platform_device_id more generic   Shawn Guo
• [PATCH 4/6] dma: mxs-dma: add device tree probe support   Shawn Guo
• [PATCH 5/6] ARM: mxs: do not add dma device by default   Shawn Guo
• [PATCH 6/6] ARM: mxs: add mxs-dma dt support   Shawn Guo
• [PATCH 00/10] Add device tree support for mxs-mmc   Shawn Guo
• [PATCH 01/10] mmc: mxs-mmc: use global stmp_device functionality   Shawn Guo
• [PATCH 02/10] mmc: mxs-mmc: let ssp_is_old take host as parameter   Shawn Guo
• [PATCH 03/10] mmc: mxs-mmc: get rid of the use of cpu_is_xxx   Shawn Guo
• [PATCH 04/10] mmc: mxs-mmc: move header from mach into linux folder   Shawn Guo
• [PATCH 05/10] mmc: mxs-mmc: use devm_* helper to make cleanup simpler   Shawn Guo
• [PATCH 06/10] mmc: mxs-mmc: have dma_channel than dma_res in mxs_mmc_host   Shawn Guo
• [PATCH 07/10] mmc: mxs-mmc: copy wp_gpio in struct mxs_mmc_host   Shawn Guo
• [PATCH 08/10] mmc: mxs-mmc: add device tree support   Shawn Guo
• [PATCH 09/10] ARM: dts: enable mmc for imx23-evk   Shawn Guo
• [PATCH 10/10] ARM: dts: enable mmc for imx28-evk   Shawn Guo
• [PATCH 15/15] ARM: ux500: use machine specific hook for late init   Shawn Guo
• [GIT PULL] arch/arm/mach-* late_initcall cleanup   Shawn Guo
• [PATCH] ARM: imx6q: register phy fixup only when CONFIG_PHYLIB is enabled   Shawn Guo
• [PATCH 2/6] dma: mxs-dma: let dma_is_apbh and apbh_is_old take parameter   Shawn Guo
• [PATCH 02/10] mmc: mxs-mmc: let ssp_is_old take host as parameter   Shawn Guo
• [PATCH 03/10] mmc: mxs-mmc: get rid of the use of cpu_is_xxx   Shawn Guo
• [PATCH 05/10] mmc: mxs-mmc: use devm_* helper to make cleanup simpler   Shawn Guo
• [PATCH 07/10] mmc: mxs-mmc: copy wp_gpio in struct mxs_mmc_host   Shawn Guo
• [PATCH 08/10] mmc: mxs-mmc: add device tree support   Shawn Guo
• [PATCH 0/5] more clk-next fixes   Shawn Guo
• [PATCH] ARM: imx6q: register phy fixup only when CONFIG_PHYLIB is enabled   Shawn Guo
• [GIT PULL] mxs common clk porting for v3.5   Shawn Guo
• [PATCH 2/6] dma: mxs-dma: let dma_is_apbh and apbh_is_old take parameter   Shawn Guo
• [PATCH V2 06/11] ASoC: fsl_ssi: convert to use devm_clk_get   Shawn Guo
• [PATCH V2 06/11] ASoC: fsl_ssi: convert to use devm_clk_get   Shawn Guo
• [PATCH V2 01/11] dma: imx-sdma: make channel0 operations atomic   Shawn Guo
• [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support   Shawn Guo
• [PATCH V2 08/11] ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000   Shawn Guo
• [PATCH V2 10/11] ARM: imx6q: change clkdev device name from xxxx.uart to xxxx.serial   Shawn Guo
• [PATCH 0/2] Add device tree probe for i2c-mxs driver   Shawn Guo
• [PATCH 1/2] i2c: mxs: add device tree probe support   Shawn Guo
• [PATCH 2/2] ARM: dts: enable i2c device for imx28-evk   Shawn Guo
• [PATCH 0/4] MXS: I2C improvements   Shawn Guo
• [GIT PULL] mxs: device tree support for v3.5   Shawn Guo
• [PATCH 0/6] Add device tree support for mxs audio   Shawn Guo
• [PATCH 1/6] ASoC: mxs: add __devinit for mxs_saif_probe   Shawn Guo
• [PATCH 2/6] ASoC: mxs: use devm_clk_get for mxs_saif_probe   Shawn Guo
• [PATCH 3/6] ASoC: mxs: mxs-pcm does not need to be a plaform_driver   Shawn Guo
• [PATCH 4/6] ASoC: mxs: add device tree support for mxs-saif   Shawn Guo
• [PATCH 5/6] ASoC: mxs: add device tree support for mxs-sgtl5000   Shawn Guo
• [PATCH 6/6] ARM: dts: enable audio support for imx28-evk   Shawn Guo
• [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support   Shawn Guo
• [alsa-devel] [PATCH 2/6] ASoC: mxs: use devm_clk_get for mxs_saif_probe   Shawn Guo
• [PATCH 2/6] ASoC: mxs: use devm_clk_get for mxs_saif_probe   Shawn Guo
• [PATCH V2 08/11] ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000   Shawn Guo
• [PATCH V2 08/11] ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000   Shawn Guo
• [PATCH V2 08/11] ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000   Shawn Guo
• [PATCH 2/6] ASoC: mxs: use devm_clk_get for mxs_saif_probe   Shawn Guo
• [alsa-devel] [PATCH 3/6] ASoC: mxs: mxs-pcm does not need to be a plaform_driver   Shawn Guo
• [alsa-devel] [PATCH 4/6] ASoC: mxs: add device tree support for mxs-saif   Shawn Guo
• [alsa-devel] [PATCH 5/6] ASoC: mxs: add device tree support for mxs-sgtl5000   Shawn Guo
• [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support   Shawn Guo
• [PATCH V2 01/11] dma: imx-sdma: make channel0 operations atomic   Shawn Guo
• [PATCH 0/4] MXS: I2C improvements   Shawn Guo
• [GIT PULL] SPEAr clk updates for v-3.5   Shawn Guo
• [alsa-devel] [PATCH V2 08/11] ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000   Shawn Guo
• [alsa-devel] [PATCH 5/6] ASoC: mxs: add device tree support for mxs-sgtl5000   Shawn Guo
• [PATCH V2 01/11] dma: imx-sdma: make channel0 operations atomic   Shawn Guo
• [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support   Shawn Guo
• [GIT PULL] SPEAr clk updates for v-3.5   Shawn Guo
• [PATCH] arm: imx53-qsb: Add Dialog DA9053 PMIC support   Shawn Guo
• [PATCH V2 00/11] enable imx6q_sabrelite sgtl5000 audio support   Shawn Guo
• [PATCH 0/5] Enable audio support for imx51-babbage and imx53-qsb   Shawn Guo
• [PATCH 1/5] ARM: imx: add more imx5 ssi clocks   Shawn Guo
• [PATCH 2/5] ARM: imx: add audmux pad setting for imx51-babbage   Shawn Guo
• [PATCH 3/5] ARM: imx: add audio codec clk lookup for imx53-qsb   Shawn Guo
• [PATCH 4/5] ARM: dts: imx51-babbage: enable audio support   Shawn Guo
• [PATCH 5/5] ARM: dts: imx53-qsb: enable audio support   Shawn Guo
• [PATCH 3/3] mmc: sdhci-imx-esdhc: convert to use pinctrl subsystem   Shawn Guo
• [PATCH 1/5] ARM: imx: add more imx5 ssi clocks   Shawn Guo
• [PATCH 1/5] ARM: imx: add more imx5 ssi clocks   Shawn Guo
• [PATCH 5/6] ASoC: mxs: add device tree support for mxs-sgtl5000   Shawn Guo
• [PATCH v2 0/3] Add device tree support for mxs audio   Shawn Guo
• [PATCH v2 1/3] ASoC: mxs: mxs-pcm does not need to be a plaform_driver   Shawn Guo
• [PATCH v2 2/3] ASoC: mxs: add device tree support for mxs-saif   Shawn Guo
• [PATCH v2 3/3] ASoC: mxs: add device tree support for mxs-sgtl5000   Shawn Guo
• [PATCH 4/5] ARM: dts: imx51-babbage: enable audio support   Shawn Guo
• [PATCH] ASoC: fsl: fix the binding of imx-sgtl5000   Shawn Guo
• [GIT PULL] Adopt pinctrl support for imx and mxs drivers   Shawn Guo
• [GIT PULL] imx device tree changes for v3.5   Shawn Guo
• [GIT PULL] Adopt pinctrl support for imx and mxs drivers   Shawn Guo
• [GIT PULL] imx device tree changes for v3.5   Shawn Guo
• [GIT PULL] mxs device tree support for v3.5   Shawn Guo
• [PATCH 0/2] Add device tree probe for i2c-mxs driver   Shawn Guo
• [GIT PULL] mxs device tree support for v3.5   Shawn Guo
• I2C pinctrl patches for IMX/MXS   Shawn Guo
• [PATCH 08/10] mmc: mxs-mmc: add device tree support   Shawn Guo
• [GIT PULL] mxs device tree support for v3.5   Shawn Guo
• [PATCH 08/10] mmc: mxs-mmc: add device tree support   Shawn Guo
• [PATCH 08/10] mmc: mxs-mmc: add device tree support   Shawn Guo
• [GIT PULL] Adopt pinctrl support for imx and mxs drivers   Shawn Guo
• [PATCH 0/2] A couple of pinctrl-mxs updates   Shawn Guo
• [PATCH 1/2] pinctrl: mxs: create group for pin config node   Shawn Guo
• [PATCH 2/2] pinctrl: mxs: skip gpio nodes for group creation   Shawn Guo
• [PATCH] i2c: imx: convert to use managed functions   Shawn Guo
• [PATCH 2/2] mfd: anatop: permit adata be NULL when access register   Shawn Guo
• [PATCH 1/1] ARM: imx6q: prepare and enable init on clks directly instead of clk_get first   Shawn Guo
• [PATCH 2/2] mfd: anatop: permit adata be NULL when access register   Shawn Guo
• [PATCH 3/5] ARM: imx: add audio codec clk lookup for imx53-qsb   Shawn Guo
• [PATCH 2/2] mfd: anatop: permit adata be NULL when access register   Shawn Guo
• [PATCH 3/5] ARM: imx: add audio codec clk lookup for imx53-qsb   Shawn Guo
• [PATCH] gpio/generic: initialize the shadow of direction register   Shawn Guo
• [PATCH] gpio/mxs: add .request and .free to hook in pinctrl calls   Shawn Guo
• [PATCH] pinctrl: mxs: add gpio range support   Shawn Guo
• [PATCH 1/2] ARM: dts: add device tree source for imx6dl   Shawn Guo
• [PATCH 2/2] ARM: imx: add initial imx6dl-sabreai board support   Shawn Guo
• [PATCH 2/2] ARM: imx: add initial imx6dl-sabreai board support   Shawn Guo
• [PATCH 1/2] ARM: dts: add device tree source for imx6dl   Shawn Guo
• [PATCH 1/2] pinctrl: pinctrl-imx: add imx53 pinctrl driver   Shawn Guo
• [PATCH] gpio/generic: initialize the shadow of direction register   Shawn Guo
• Pre-merge window status of the arm-soc tree   Shawn Guo
• [PATCH 1/2] ARM: dts: add device tree source for imx6dl   Shawn Guo
• [PATCH] gpio/generic: initialize the shadow of direction register   Shawn Guo
• [PATCH] gpio/generic: initialize the shadow of direction register   Shawn Guo
• [PATCH] gpio/generic: initialize the shadow of direction register   Shawn Guo
• [PATCH] gpio/generic: initialize the shadow of direction register   Shawn Guo
• [PATCH v1 0/7] preliminary work for adding imx6q_sabrelite usb support   Shawn Guo
• [PATCH 1/2] pinctrl: pinctrl-imx: add imx53 pinctrl driver   Shawn Guo
• [PATCH] gpio/generic: initialize the shadow of direction register   Shawn Guo
• [PATCH] gpio/generic: initialize the shadow of direction register   Shawn Guo
• [PATCH RFC 1/1] pinctrl: improve gpio support for dt   Shawn Guo
• [PATCH] pinctrl: mxs: add gpio range support   Shawn Guo
• [PATCH] pinctrl: mxs: add gpio range support   Shawn Guo
• [PATCH 0/2] Fix basic_mmio_gpio shadow initialization   Shawn Guo
• [PATCH 1/2] gpio/generic: initialize basic_mmio_gpio shadow variables properly   Shawn Guo
• [PATCH 2/2] gpio/mxc: remove basic_mmio_gpio shadow fixup   Shawn Guo
• Issues when running DT enabled kernel on iMX28 from linux-next   Shawn Guo
• Issues when running DT enabled kernel on iMX28 from linux-next   Shawn Guo
• Issues when running DT enabled kernel on iMX28 from linux-next   Shawn Guo
• [PATCH 1/2] gpio/generic: initialize basic_mmio_gpio shadow variables properly   Shawn Guo
• Duplicate labels in dts files   Shawn Guo
• [PATCH v2] gpio/generic: initialize basic_mmio_gpio shadow variables properly   Shawn Guo
• Issues when running DT enabled kernel on iMX28 from linux-next   Shawn Guo
• [PATCH] mtd: nand: gpmi: fix compile error caused by pinctrl call   Shawn Guo
• [PATCH v2 RESEND] gpio/generic: initialize basic_mmio_gpio shadow variables properly   Shawn Guo
• [PATCH] mtd: nand: gpmi: fix compile error caused by pinctrl call   Shawn Guo
• Issues when running DT enabled kernel on iMX28 from linux-next   Shawn Guo
• [PATCH v2] gpio/generic: initialize basic_mmio_gpio shadow variables properly   Shawn Guo
• [GIT PULL] DT clk binding support   Shawn Guo
• [PATCH RESEND 5/5] spi/imx: adopt pinctrl support   Shawn Guo
• [PATCH 1/4] GPMI-NAND: Define ecc.strength   Shawn Guo
• [PATCH 2/4] GPMI-NAND: Fixup compile issue   Shawn Guo
• [PATCH 4/4] MXS-MMC: Add wp-inverted property   Shawn Guo
• [PATCH 1/4] GPMI-NAND: Define ecc.strength   Shawn Guo
• [PATCH 4/4] MXS-MMC: Add wp-inverted property   Shawn Guo
• [PATCH 1/4] GPMI-NAND: Define ecc.strength   Shawn Guo
• [PATCH 3/4] MXS-MMC: Move of_match_table out of CONFIG_PM   Shawn Guo
• [PATCH] ARM: mx51: Add pinctrl_provide_dummies()   Shawn Guo
• [PATCH v2] ARM: mx31: Add pinctrl_provide_dummies()   Shawn Guo
• [PATCH 2/2] mfd: anatop: permit adata be NULL when access register   Shawn Guo
• [PATCH] ARM: mxs: Let GPMI driver be built by default   Shawn Guo
• [PATCH] ARM: mxs: Let GPMI driver be built by default   Shawn Guo
• [PATCH] ARM: mxs: Let GPMI driver be built by default   Shawn Guo
• [PATCH] ARM: mxs: Let GPMI driver be built by default   Shawn Guo
• [GIT PULL] DT clk binding support   Shawn Guo
• [GIT PULL] DT clk binding support   Shawn Guo
• [PATCH v2 00/12] add imx usb driver for mx28/6x   Shawn Guo
• [GIT PULL] DT clk binding support   Shawn Guo
• [PATCH v2 07/12] ARM: imx6q: add config-on-boot gpios   Shawn Guo
• [PATCH v2 07/12] ARM: imx6q: add config-on-boot gpios   Shawn Guo
• [PATCH v2 09/12] ARM: imx6q: disable usb charger detector   Shawn Guo
• [PATCH v2 07/12] ARM: imx6q: add config-on-boot gpios   Shawn Guo
• [PATCH v2 08/12] ARM: imx6q: add usbphy clocks   Shawn Guo
• [PATCH v2 11/12] ARM: mxs: clk_register_clkdev mx28 usb clocks   Shawn Guo
• [PATCH v2 12/12] ARM: dts: imx28-evk: add usb devices   Shawn Guo
• [PATCH v2 10/12] ARM: dts: imx6q-sabrelite: add usb devices   Shawn Guo
• [PATCH v2 07/12] ARM: imx6q: add config-on-boot gpios   Shawn Guo
• [PATCH v2 08/12] ARM: imx6q: add usbphy clocks   Shawn Guo
• [PATCH v2 10/12] ARM: dts: imx6q-sabrelite: add usb devices   Shawn Guo
• [PATCH v2 05/12] usb: chipidea: add imx driver binding   Shawn Guo
• Booting mx31 on linux-next-20120517   Shawn Guo
• [PATCH 1/1] dma: imx-sdma: buf_tail should be initialize in prepare function   Shawn Guo
• [PATCH 1/1] dma: imx-sdma: buf_tail should be initialize in prepare function   Shawn Guo
• [PATCH] ARM: mx28: add gpmi-nand dt support   Shawn Guo
• [PATCH 1/5] ARM: imx6q: add DT node for apbh-dma   Shawn Guo
• [PATCH 3/5] dma: mxs-dma: enable apbh-dma for imx6q   Shawn Guo
• [PATCH 2/5] ARM: imx6q: add clock for apbh-dma   Shawn Guo
• [PATCH 4/5] ARM: imx6q: add DT node for gpmi-nand   Shawn Guo
• [PATCH] serial/amba-pl011: move custom pin control to driver   Shawn Guo
• [PATCH] [ARM] Unconditional call to smp_cross_call on UP crashes (take #2)   Shawn Guo
• [PATCH 1/1] dma: imx-sdma: buf_tail should be initialize in prepare function   Shawn Guo
• [PATCH] ARM: new cache maintenance api for iommu mem flush   Gupta, Ramesh
• [PATCH] OMAP: iommu flush page table entries from L1 and L2 cache   Gupta, Ramesh
• [PATCH v2] arm: msm: fix up very basic HTC Sapphire support   Shantanu Gupta
• [PATCH v2 3/3] omap: remoteproc: add support for a boot register   Gutierrez, Juan
• [PATCH v2 2/3] OMAP4: iommu: fix irq and clock name for dsp-iommu   Gutierrez, Juan
• [PATCH v2 1/3] omap: mailbox: enable mailbox irq per instance   Gutierrez, Juan
• [PATCH v3 0/2] Fixes in preparation for enabling Dsp in omap4   Juan Gutierrez
• [PATCH v3 1/2] omap: mailbox: enable mailbox irq per instance   Juan Gutierrez
• [PATCH v3 2/2] omap4: iommu: fix irq and clock name for dsp-iommu   Juan Gutierrez
• [PATCH v4 0/2] Fixes in preparation for enabling Dsp in omap4   Juan Gutierrez
• [PATCH v4 1/2] omap: mailbox: enable mailbox irq per instance   Juan Gutierrez
• [PATCH v4 2/2] omap4: iommu: fix irq and clock name for dsp-iommu   Juan Gutierrez
• [PATCH V3 07/10] ARM: OMAP2+: SmartReflex: Use per-OPP data structure   Guyotte, Greg
• [PATCH] remoteproc: allocate vrings on demand, free when not needed   Guzman Lugo, Fernando
• [PATCH] remoteproc: allocate vrings on demand, free when not needed   Guzman Lugo, Fernando
• [PATCH] ixp4xx: fix compilation by adding gpiolib support   Krzysztof Halasa
• [PATCH 4/8] mmc: mmci: Use ios_handler to save power   Ulf Hansson
• Regression for non-eMMC cards with commit fa550189?   Ulf Hansson
• smp_twd fix for adapting to cpu frequency change   Shiraz Hashim
• [PATCH v2 1/3] ARM: imx: Add common imx cpuidle init functionality.   Sascha Hauer
• [PATCH v2 2/3] ARM: imx: Add imx5 cpuidle driver   Sascha Hauer
• [PATCH] serial/imx: enable the clock when we really use the uart port   Sascha Hauer
• [GIT PULL] i.MX cleanups for 3.5   Sascha Hauer
• [GIT PULL] defconfig updates for 3.5   Sascha Hauer
• [PATCH V3 2/8] clk: add a fixed factor clock   Sascha Hauer
• [PATCH 1/3] clk: always pass parent_rate into .round_rate   Sascha Hauer
• [PATCH] clk: Use a separate struct for holding init data.   Sascha Hauer
• [PATCH] clk: Use a separate struct for holding init data.   Sascha Hauer
• [PATCH 05/15] ARM: imx: use machine specific hook for late init   Sascha Hauer
• [PATCH 09/11] ARM: imx6q: add ssi1 clk_lookup   Sascha Hauer
• [PATCH v2 1/3] ARM: imx: Add common imx cpuidle init functionality.   Sascha Hauer
• [PATCH 31/33] ARM i.MX5: implement clocks using common clock framework   Sascha Hauer
• [PATCH V3 2/8] clk: add a fixed factor clock   Sascha Hauer
• [PATCH v2 2/3] ARM: imx: Add imx5 cpuidle driver   Sascha Hauer
• [PATCH V4] clk: add a fixed factor clock   Sascha Hauer
• Making ARM multiplatform kernels DT-only?   Sascha Hauer
• common clock framework   Sascha Hauer
• common clock framework   Sascha Hauer
• [GIT PULL] clk for next   Sascha Hauer
• Making ARM multiplatform kernels DT-only?   Sascha Hauer
• common clock framework   Sascha Hauer
• [PATCH 2/5] clk: prevent spurious parent rate propagation   Sascha Hauer
• [GIT PULL] i.MX common clock support   Sascha Hauer
• [GIT PULL] i.MX Eukrea board patches   Sascha Hauer
• [PATCH] ARM: mx35: add cpufreq support   Sascha Hauer
• [PATCH 1/2] usb: fsl_mxc_udc.c: add workaround for ENGcm09152 for i.MX25   Sascha Hauer
• [PATCH] imx21ads : Fix overlapping static i/o mappings   Sascha Hauer
• [PATCH v3 2/3] ARM: imx: Add imx5 cpuidle driver   Sascha Hauer
• [PATCH] ARM: mx35: add cpufreq support   Sascha Hauer
• [PATCH v3 2/3] ARM: imx: Add imx5 cpuidle driver   Sascha Hauer
• i.MX USB Re-Structure   Sascha Hauer
• [PATCH 1/5] ARM: imx: add more imx5 ssi clocks   Sascha Hauer
• [PATCH 1/5] ARM: imx: add more imx5 ssi clocks   Sascha Hauer
• [GIT PULL] i.MX common clock support   Sascha Hauer
• [GIT PULL] i.MX common clock support   Sascha Hauer
• [RFC PATCH] ARM: imx: add PM support to i.MX25   Sascha Hauer
• [PATCH 3/5] ARM: imx: add audio codec clk lookup for imx53-qsb   Sascha Hauer
• [PATCH 3/5] ARM: imx: add audio codec clk lookup for imx53-qsb   Sascha Hauer
• [GIT PULL] i.MX21 fix for 3.4   Sascha Hauer
• [PATCH] clk: Constify struct clk_init_data   Sascha Hauer
• [PATCH 1/1] ARM: mxc: change timer clock to perclk   Sascha Hauer
• [PATCH 1/1] mx31_3ds: Add sound support   Sascha Hauer
• [PATCH] clk: Fix race conditions between clk_set_parent() and clk_enable()   Sascha Hauer
• [PATCH] clk: Fix race conditions between clk_set_parent() and clk_enable()   Sascha Hauer
• i.MX common clock framework fixes   Sascha Hauer
• [PATCH 1/4] ARM i.MX5: fix gpt peripheral clock path   Sascha Hauer
• [PATCH 2/4] ARM: i.MX: change timer clock from ipg to perclk   Sascha Hauer
• [PATCH 3/4] ARM i.MX: remove now unnecessary argument from mxc_timer_init   Sascha Hauer
• [PATCH 4/4] ARM: imx6q: prepare and enable init on clks directly instead of clk_get first   Sascha Hauer
• [PATCH v4 3/7] ARM: imx: clean and consolidate imx5 suspend and idle code   Sascha Hauer
• [PATCH v4 4/7] ARM: imx: Enable imx53 low power idle   Sascha Hauer
• [PATCH v4 5/7] ARM: imx: Add common imx cpuidle init functionality.   Sascha Hauer
• [GIT PULL] i.MX common clock fixes   Sascha Hauer
• [PATCH v4 4/7] ARM: imx: Enable imx53 low power idle   Sascha Hauer
• [PATCH v4 3/7] ARM: imx: clean and consolidate imx5 suspend and idle code   Sascha Hauer
• [PATCH] ARM: mx35: add cpufreq support   Sascha Hauer
• Booting mx31 on linux-next-20120517   Sascha Hauer
• No subject   Sascha Hauer
• [PATCH 1/2] DRM: add Freescale i.MX LCDC driver   Sascha Hauer
• [PATCH 2/2] pcm038 lcdc support   Sascha Hauer
• [PATCH 2/2] pcm038 lcdc support   Sascha Hauer
• [PATCH 1/2] DRM: add Freescale i.MX LCDC driver   Sascha Hauer
•   Sascha Hauer
•   Sascha Hauer
• [PATCH 2/5] ARM: imx6q: add clock for apbh-dma   Sascha Hauer
• [PATCH v5 0/7] cleanup imx5 idle, add imx5/6 cpuidle   Sascha Hauer
• [PATCH 2/5] ARM: imx6q: add clock for apbh-dma   Sascha Hauer
• [PATCH 1/2] mtd mxc_nand: use 32bit copy functions   Sascha Hauer
• [PATCH 2/2] mtd mxc_nand: move ecc strengh setup before nand_scan_tail   Sascha Hauer
• Booting mx27 on linux-next   Sascha Hauer
• [PATCH 1/2] mtd mxc_nand: use 32bit copy functions   Sascha Hauer
• [PATCH 01/15] ARM: mx5: Use clk_prepare_enable/clk_disable_unprepare   Sascha Hauer
• [PATCH v2] mtd mxc_nand: use 32bit copy functions   Sascha Hauer
• [PATCH] ARM: mx31_3ds: Fix build due to missing IMX_HAVE_PLATFORM_IMX_SSI   Sascha Hauer
• [PATCH] ARM: imx_v6_v7_defconfig: Add sound support   Sascha Hauer
• [PATCH] ARM: i.MX35: Implement camera and keypad clocks   Sascha Hauer
• [PATCH v2] mtd mxc_nand: use 32bit copy functions   Sascha Hauer
• [PATCH v2] mtd mxc_nand: use 32bit copy functions   Sascha Hauer
• [PATCH] ARM: mx35: add cpufreq support   Sascha Hauer
• [PATCH] ARM: imx: only specify i2c device type once   Sascha Hauer
• [PATCH] ARM: imx: only call l2x0_init if it's available   Sascha Hauer
• [PATCH] Drop superfluous setting of i2c_board_info.type   Sascha Hauer
• [PATCH] Visstrim M10: fix gpio handling.   Sascha Hauer
• [GIT PULL] i.MX common clock fixes   Sascha Hauer
• mm: fix faulty initialization in vmalloc_init()   Olav Haugan
• [PATCH RESEND v5] rtc: Add device tree support for LPC32xx   Rob Herring
• Making ARM multiplatform kernels DT-only?   Rob Herring
• [PATCH 3/4] clk: add DT clock binding support   Rob Herring
• [PATCH 1/8] arm: mach-armada: add headers   Rob Herring
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Rob Herring
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Rob Herring
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Rob Herring
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Rob Herring
• [PATCH v2 0/2] Highbank clock support using DT   Rob Herring
• [PATCH v2 1/2] dt: add clock binding doc to primecell bindings   Rob Herring
• [PATCH v2 2/2] clk: add highbank clock support   Rob Herring
• [PATCH RESEND v3 1/2] input: keyboard: Add keys driver for the LPC32xx SoC   Rob Herring
• [PATCH RESEND v3 2/2] ARM: LPC32xx: Make platform use key driver   Rob Herring
• [PATCH v2 0/9] support dt for mmp2   Rob Herring
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Rob Herring
• [GIT PULL] DT clk binding support   Rob Herring
• [GIT PULL] DT clk binding support   Rob Herring
• [GIT PULL] DT clk binding support   Rob Herring
• [GIT PULL] DT clk binding support   Rob Herring
• [GIT PULL] DT clk binding support   Rob Herring
• [PATCH v2 2/2] clk: add highbank clock support   Rob Herring
• [GIT PULL] DT clk binding support   Rob Herring
• [GIT PULL] DT clk binding support   Rob Herring
• v3.4 boot failure on qemu-system-arm -M versatilepb   Rob Herring
• ARM Versatile defconfig PCI io out of range?   Rob Herring
• ARM Versatile defconfig PCI io out of range?   Rob Herring
• Exynos4: NURI: Remove redundant S5P_SETUP_MIPIPHY configuration   HeungJun, Kim
• Exynos4: Fix the I2C.0 platform device's ID to 0 in the devs.c   HeungJun, Kim
• [PATCH v2] arm: omap3: am35x: Don't mark missing features as present   Kevin Hilman
• [PATCH-V5 3/3] ARM: OMAP: Make OMAP clocksource source selection using kernel param   Kevin Hilman
• [PATCH-V6 1/3] ARM: OMAP1: FIX: check possible error condition in timer_init   Kevin Hilman
• [PATCH-V6 2/3] ARM: OMAP2+: Replace space=>underscore in the name field of system timers   Kevin Hilman
• [PATCH-V6 3/3] ARM: OMAP: Make OMAP clocksource source selection using kernel param   Kevin Hilman
• [PATCH] net: davinci_emac: Add pre_open, post_stop platform callbacks   Kevin Hilman
• [PATCH] ARM: OMAP2+: watchdog: fix !PM boot crash, disarm timer after hwmod reset   Kevin Hilman
• [PATCH 11/18][V3] ARM: OMAP3: cpuidle - remove the 'valid' field   Kevin Hilman
• [PATCH 18/18][V3] ARM: OMAP3: cpuidle - set global variables static   Kevin Hilman
• [PATCH 17/18][V3] ARM: OMAP3/4: consolidate cpuidle Makefile   Kevin Hilman
• [PATCH 00/18][V3] ARM: OMAP3/4 : cpuidle34xx and cpuidle44xx cleanups   Kevin Hilman
• [PATCH-V5 2/3] arm:omap:am33xx: Add AM335XEVM machine support   Kevin Hilman
• [PATCH] net: davinci_emac: Add pre_open, post_stop platform callbacks   Kevin Hilman
• [PATCH 4/7] ARM: OMAP: dma: Make use of cpu_class_is_omap2() to avoid future patching.   Kevin Hilman
• [PATCH] net: davinci_emac: Add pre_open, post_stop platform callbacks   Kevin Hilman
• [PATCH] net: davinci_emac: Add pre_open, post_stop platform callbacks   Kevin Hilman
• [PATCH 4/7] ARM: OMAP: dma: Make use of cpu_class_is_omap2() to avoid future patching.   Kevin Hilman
• [PATCH] net: davinci_emac: Add pre_open, post_stop platform callbacks   Kevin Hilman
• [PATCH 1/2] ARM: OMAP3: cpuidle - check the powerdomain lookup   Kevin Hilman
• oprofile and ARM A9 hardware counter   Kevin Hilman
• [PATCH 0/2] ARM: OMAP3: cleanup AM35xx SoC detection   Kevin Hilman
• [PATCH 1/2] OMAP2+: UART: Fix incorrect population of default uart pads   Kevin Hilman
• [GIT PULL] ARM: OMAP: PM: CPUidle cleanup for v3.5   Kevin Hilman
• [PATCH 1/2 v4] ARM: OMAP2+: omap_hwmod: Add api to enable/disable module level wakeup events   Kevin Hilman
• oprofile and ARM A9 hardware counter   Kevin Hilman
• [PATCH V3 04/10] ARM: OMAP3: hwmod: rename the smartreflex entries   Kevin Hilman
• [PATCH V3 00/10] PM: Create the AVS(Adaptive Voltage Scaling)   Kevin Hilman
• [PATCH V3 00/10] PM: Create the AVS(Adaptive Voltage Scaling)   Kevin Hilman
• [PATCH V3 04/10] ARM: OMAP3: hwmod: rename the smartreflex entries   Kevin Hilman
• [PATCHv4 6/8] ARM: OMAP4: PM: support ret_logic/mem_off_counters   Kevin Hilman
• oprofile and ARM A9 hardware counter   Kevin Hilman
• oprofile and ARM A9 hardware counter   Kevin Hilman
• CPUFREQ maintainence.   Kevin Hilman
• [PATCH 0/2] ARM: OMAP/TWL: remove unused pdata IRQ fields   Kevin Hilman
• [PATCH 1/2] ARM: OMAP2+: TWL: remove usage of pdata->irq_base/_end   Kevin Hilman
• [PATCH 2/2] mfd: twl: remove pdata->irq_base/_end, no more users   Kevin Hilman
• [PATCH] ARM: OMAP2+: irq: Increase no of supported interrupts to 128   Kevin Hilman
• [PATCH 2/2] ARM: OMAP3/4: consolidate cpuidle Makefile   Kevin Hilman
• [PATCH 2/2] ARM: OMAP3/4: consolidate cpuidle Makefile   Kevin Hilman
• [PATCH 0/2] ARM: OMAP3: cleanup AM35xx SoC detection   Kevin Hilman
• oprofile and ARM A9 hardware counter   Kevin Hilman
• oprofile and ARM A9 hardware counter   Kevin Hilman
• [PATCH] ARM: OMAP2+: am33xx: Make am33xx as a separate class   Kevin Hilman
• [PATCH 0/3] ARM: OMAP2+: Kconfig: minor cleanup for SOC names   Kevin Hilman
• [PATCH 1/3] ARM: OMAP2+: INTC: fix Kconfig option for TI81XX   Kevin Hilman
• [PATCH 2/3] ARM: OMAP2+: Kconfig: convert SOC_OMAPTI81XX to SOC_TI81XX   Kevin Hilman
• [PATCH 3/3] ARM: OMAP2+: Kconfig: convert SOC_OMAPAM33XX to SOC_AM33XX   Kevin Hilman
• [linux-pm] [PATCH V3 00/10] PM: Create the AVS(Adaptive Voltage Scaling)   Kevin Hilman
• [PATCH-V2 3/4] ARM: OMAP2+: CLEANUP: Remove unnecessary ifdef around __omap2_set_globals   Kevin Hilman
• [PATCH-V2 4/4] ARM: OMAP2+: CLEANUP: Add new config option for different DPLL features   Kevin Hilman
• [linux-pm] [PATCH V3 00/10] PM: Create the AVS(Adaptive Voltage Scaling)   Kevin Hilman
• [PATCH 00/19] ARM: OMAP4 device off support   Kevin Hilman
• [PATCH 02/19] ARM: OMAP4: PM: save/restore all CM1/2 settings in OFF mode   Kevin Hilman
• oprofile and ARM A9 hardware counter   Kevin Hilman
• [PATCH v2] gpio/omap: fix incorrect initialization of omap_gpio_mod_init   Kevin Hilman
• [PATCH-V2 3/4] ARM: OMAP2+: CLEANUP: Remove unnecessary ifdef around __omap2_set_globals   Kevin Hilman
• [PATCH] ARM: OMAP2+: irq: Increase no of supported interrupts to 128   Kevin Hilman
• [PATCH 0/8] gpio/omap: remaining cleanups and fix   Kevin Hilman
• [PATCH-V2 3/4] ARM: OMAP2+: CLEANUP: Remove unnecessary ifdef around __omap2_set_globals   Kevin Hilman
• [GIT PULL] gpio/omap: cleanups for v3.5   Kevin Hilman
• [PATCH 2/2] arm: omap3: am35x: Disable hlt when using Davinci EMAC   Kevin Hilman
• [PATCH] ARM: OMAP2+: CLEANUP: Remove ARCH_OMAPx ifdef from struct dpll_data   Kevin Hilman
• [PATCH 0/2] arm: omap3: am35x: Convert emac to hwmod & disable hlt when open   Kevin Hilman
• [RESEND PATCH 1/2] ARM: OMAP2+: nand: Make board_onenand_init() visible to board code   Kevin Hilman
• [PATCHv5 1/8] ARM: OMAP4: suspend: Program all domains to retention   Kevin Hilman
• [RESEND PATCH 1/2] ARM: OMAP2+: nand: Make board_onenand_init() visible to board code   Kevin Hilman
• [PATCHv5 3/8] ARM: OMAP4460: Workaround for ROM bug because of CA9 r2pX gic control register change   Kevin Hilman
• [PATCHv4 4/8] ARM: OMAP4: hwmod: flag hwmods/modules supporting module level context status   Kevin Hilman
• [PATCHv5 6/8] ARM: OMAP4: pwrdm: add support for reading prev logic and mem states   Kevin Hilman
• [PATCHv5 8/8] ARM: OMAP4: PM: Added option for enabling OSWR   Kevin Hilman
• [PATCHv5 3/8] ARM: OMAP4460: Workaround for ROM bug because of CA9 r2pX gic control register change   Kevin Hilman
• [PATCHv5 8/8] ARM: OMAP4: PM: Added option for enabling OSWR   Kevin Hilman
• [PATCHv2 01/19] ARM: OMAP4: PM: powerdomain: Add HWSAR flag to L3INIT   Kevin Hilman
• [PATCHv2 02/19] ARM: OMAP4: Add SAR ROM base address   Kevin Hilman
• [PATCHv2 03/19] ARM: OMAP4: PM: Add device-off support   Kevin Hilman
• [PATCHv2 04/19] ARM: OMAP4: PM: save/restore all DPLL settings in OFF mode   Kevin Hilman
• [PATCHv2 05/19] ARM: OMAP4: PM: save/restore all CM1/2 settings in OFF mode   Kevin Hilman
• [PATCHv2 06/19] ARM: OMAP4: PM: Add SAR backup support towards device OFF   Kevin Hilman
• [PATCHv2 10/19] ARM: OMAP4: PM: Work-around for ROM code BUG of IVAHD/TESLA   Kevin Hilman
• [PATCHv2 10/19] ARM: OMAP4: PM: Work-around for ROM code BUG of IVAHD/TESLA   Kevin Hilman
• [PATCHv2 11/19] ARM: OMAP4: PM: save/restore CM L3INSTR registers when MPU hits OSWR/OFF mode   Kevin Hilman
• [PATCHv2 12/19] ARM: OMAP4: PM: update ROM return address for OSWR and OFF   Kevin Hilman
• [PATCHv2 13/19] ARM: OMAP4: PM: Mark the PPI and SPI interrupts as non-secure for GP   Kevin Hilman
• [PATCHv2 14/19] ARM: OMAP4: wakeupgen: enable clocks for save_secure_all   Kevin Hilman
• [PATCHv2 15/19] ARM: OMAP4430: PM: workaround for DDR corruption on second CS   Kevin Hilman
• [PATCHv2 17/19] ARM: OMAP4: put cpu1 back to sleep if no wake request   Kevin Hilman
• [PATCHv2 18/19] ARM: OMAP4460: wakeupgen: set GIC_CPU0 backup status flag always   Kevin Hilman
• [PATCHv2 04/19] ARM: OMAP4: PM: save/restore all DPLL settings in OFF mode   Kevin Hilman
• [PATCHv2 06/19] ARM: OMAP4: PM: Add SAR backup support towards device OFF   Kevin Hilman
• [PATCHv2 10/19] ARM: OMAP4: PM: Work-around for ROM code BUG of IVAHD/TESLA   Kevin Hilman
• [PATCHv2 15/19] ARM: OMAP4430: PM: workaround for DDR corruption on second CS   Kevin Hilman
• [PATCHv5 3/8] ARM: OMAP4460: Workaround for ROM bug because of CA9 r2pX gic control register change   Kevin Hilman
• [PATCH 8/8] gpio/omap: fix missing check in *_runtime_suspend()   Kevin Hilman
• [PATCH 8/8] gpio/omap: fix missing check in *_runtime_suspend()   Kevin Hilman
• [PATCH 8/8] gpio/omap: fix missing check in *_runtime_suspend()   Kevin Hilman
• [PATCHv5 3/8] ARM: OMAP4460: Workaround for ROM bug because of CA9 r2pX gic control register change   Kevin Hilman
• [GIT PULL] gpio/omap: fix fallout from last cleanup series   Kevin Hilman
• [PATCH v3] OMAP2+: UART: Add mechanism to probe uart pins and configure rx wakeup   Kevin Hilman
• [PATCH V3 00/10] PM: Create the AVS(Adaptive Voltage Scaling)   Kevin Hilman
• [linux-pm] [PATCH V3 00/10] PM: Create the AVS(Adaptive Voltage Scaling)   Kevin Hilman
• [PATCHv9 06/10] I2C: OMAP: Fix the crash in i2c remove   Kevin Hilman
• [PATCHv9 02/10] I2C: OMAP: Fix the mismatch of pm_runtime enable and disable   Kevin Hilman
• [PATCHv9 07/10] I2C: OMAP: Handle error check for pm runtime   Kevin Hilman
• [PATCHv9 09/10] I2C: OMAP: Do not set the XUDF(Transmit underflow) if the underflow is not reached   Kevin Hilman
• [PATCHv9 00/10] I2C fixes   Kevin Hilman
• [linux-pm] [PATCH 0/2] bug fixes for coupled cpuidle   Kevin Hilman
• [PATCH] MAINTAINERS: add OMAP CPUfreq driver to OMAP Power Management section   Kevin Hilman
• [PATCHv9 00/10] I2C fixes   Kevin Hilman
• [PATCH v2 0/4] OMAP4: CPUidle: Add coupled idle support   Kevin Hilman
• [PATCHv2 03/19] ARM: OMAP4: PM: Add device-off support   Kevin Hilman
• [PATCHv2 03/19] ARM: OMAP4: PM: Add device-off support   Kevin Hilman
• [PATCHv2 10/19] ARM: OMAP4: PM: Work-around for ROM code BUG of IVAHD/TESLA   Kevin Hilman
• [PATCHv2 14/19] ARM: OMAP4: wakeupgen: enable clocks for save_secure_all   Kevin Hilman
• [PATCHv2 17/19] ARM: OMAP4: put cpu1 back to sleep if no wake request   Kevin Hilman
• [PATCH 0/3] ARM: OMAP4: add support for TPS62361 PMIC   Kevin Hilman
• [PATCH 1/3] ARM: OMAP4: VC: fix I2C timing   Kevin Hilman
• [PATCHv2 04/19] ARM: OMAP4: PM: save/restore all DPLL settings in OFF mode   Kevin Hilman
• [PATCH] ARM: OMAP3/4: consolidate cpuidle Makefile   Kevin Hilman
• [PATCHv2 04/19] ARM: OMAP4: PM: save/restore all DPLL settings in OFF mode   Kevin Hilman
• [PATCH] ARM: OMAP3/4: consolidate cpuidle Makefile   Kevin Hilman
• [GIT PULL] OMAP PM fixes for v3.5-rc   Kevin Hilman
• [GIT PULL] OMAP: AM3xxx: cpu_is dead code removal   Kevin Hilman
• [PATCH v2 0/2] arm: omap3: am35x: Convert emac to hwmod & disable hlt when open   Kevin Hilman
• [PATCH v2 2/2] arm: omap3: am35x: Disable hlt when using Davinci EMAC   Kevin Hilman
• [PATCH V3 00/10] PM: Create the AVS(Adaptive Voltage Scaling)   Kevin Hilman
• [PATCHv10 00/11] I2C fixes   Kevin Hilman
• [PATCH] ARM: OMAP2+: OPP: Fix to ensure check of right oppdef after bad one   Kevin Hilman
• [PATCH 1/3] ARM: OMAP3+: PM: VP: ensure VP is idle before disable   Kevin Hilman
• [PATCH 2/3] ARM: OMAP3+: PM: VP: check to ensure VP is idle before forceupdate   Kevin Hilman
• [PATCH 3/3] ARM: OMAP3+: PM: VP: check only the VPINIDLE status bit   Kevin Hilman
• [PATCH 1/3] ARM: OMAP3+: PM: VP: ensure VP is idle before disable   Kevin Hilman
• [linux-pm] [RFC PATCH 00/11] OMAP System Control Module   Kevin Hilman
• [PATCH-V5 2/3] arm:omap:am33xx: Add AM335XEVM machine support   Hiremath, Vaibhav
• [PATCH-V4 0/4] ARM: OMAP2+: Add voltagedomain, powerdomain & PRM support for AM33XX device   Hiremath, Vaibhav
• [PATCH-V6 0/3] ARM: OMAP: Make OMAP clocksource source selection runtime   Vaibhav Hiremath
• [PATCH-V6 1/3] ARM: OMAP1: FIX: check possible error condition in timer_init   Vaibhav Hiremath
• [PATCH-V6 2/3] ARM: OMAP2+: Replace space=>underscore in the name field of system timers   Vaibhav Hiremath
• [PATCH-V6 3/3] ARM: OMAP: Make OMAP clocksource source selection using kernel param   Vaibhav Hiremath
• [PATCH-V6 0/3] ARM: OMAP: Make OMAP clocksource source selection runtime   Hiremath, Vaibhav
• [PATCH-V7 0/3] ARM: OMAP: Make OMAP clocksource source selection runtime   Vaibhav Hiremath
• [PATCH-V7 1/3] ARM: OMAP1: FIX: check possible error condition in timer_init   Vaibhav Hiremath
• [PATCH-V7 2/3] ARM: OMAP2+: Replace space=>underscore in the name field of system timers   Vaibhav Hiremath
• [PATCH-V7 3/3] ARM: OMAP: Make OMAP clocksource source selection using kernel param   Vaibhav Hiremath
• [PATCH-V6 3/3] ARM: OMAP: Make OMAP clocksource source selection using kernel param   Hiremath, Vaibhav
• [PATCH-V4 0/4] ARM: OMAP2+: Add voltagedomain, powerdomain & PRM support for AM33XX device   Hiremath, Vaibhav
• [PATCH-V5 2/3] arm:omap:am33xx: Add AM335XEVM machine support   Hiremath, Vaibhav
• [PATCH-V5 2/3] arm:omap:am33xx: Add AM335XEVM machine support   Hiremath, Vaibhav
• [PATCH-V5 2/3] arm:omap:am33xx: Add AM335XEVM machine support   Hiremath, Vaibhav
• [PATCH-V5 2/3] arm:omap:am33xx: Add AM335XEVM machine support   Hiremath, Vaibhav
• [PATCH-V4 0/4] ARM: OMAP2+: Add voltagedomain, powerdomain & PRM support for AM33XX device   Hiremath, Vaibhav
• [PATCH-V5 2/3] arm:omap:am33xx: Add AM335XEVM machine support   Hiremath, Vaibhav
• [PATCH-V5 2/3] arm:omap:am33xx: Add AM335XEVM machine support   Hiremath, Vaibhav
• [PATCH 02/13] ARM: OMAP5: Add minimal support for OMAP5430 SOC   Hiremath, Vaibhav
• [PATCH] ARM: OMAP2+: irq: Increase no of supported interrupts to 128   Vaibhav Hiremath
• [PATCH 0/4] ARM: OMAP2+: Cleanup series in order to remove ARCH_OMAPx dependency   Vaibhav Hiremath
• [PATCH 1/4] ARM: OMAP2+: CLEANUP: All OMAP2PLUS uses omap-device.o target so add one entry   Vaibhav Hiremath
• [PATCH 2/4] ARM: OMAP2+: CLEANUP: Move omap3 dpll ops to dpll3xxx.c   Vaibhav Hiremath
• [PATCH 3/4] ARM: OMAP2+: CLEANUP: Remove unnecessary ifdef around __omap2_set_globals   Vaibhav Hiremath
• [RFC PATCH 4/4] ARM: OMAP2+: CLEANUP: Add new config option for different DPLL features   Vaibhav Hiremath
• [PATCH] ARM: OMAP2+: am33xx: Make am33xx as a separate class   Vaibhav Hiremath
• [PATCH 02/13] ARM: OMAP5: Add minimal support for OMAP5430 SOC   Hiremath, Vaibhav
• [RFC PATCH 4/4] ARM: OMAP2+: CLEANUP: Add new config option for different DPLL features   Hiremath, Vaibhav
• [PATCH-V2 0/4] ARM: OMAP2+: Cleanup series in order to remove ARCH_OMAPx dependency   Vaibhav Hiremath
• [PATCH-V2 1/4] ARM: OMAP2+: CLEANUP: All OMAP2PLUS uses omap-device.o target so add one entry   Vaibhav Hiremath
• [PATCH-V2 2/4] ARM: OMAP2+: CLEANUP: Move omap3 dpll ops to dpll3xxx.c   Vaibhav Hiremath
• [PATCH-V2 3/4] ARM: OMAP2+: CLEANUP: Remove unnecessary ifdef around __omap2_set_globals   Vaibhav Hiremath
• [PATCH-V2 4/4] ARM: OMAP2+: CLEANUP: Add new config option for different DPLL features   Vaibhav Hiremath
• [PATCH-V5 2/3] arm:omap:am33xx: Add AM335XEVM machine support   Hiremath, Vaibhav
• [PATCH 0/3] ARM: OMAP2+: Kconfig: minor cleanup for SOC names   Hiremath, Vaibhav
• [PATCH-V2 3/4] ARM: OMAP2+: CLEANUP: Remove unnecessary ifdef around __omap2_set_globals   Hiremath, Vaibhav
• [PATCH-V2 4/4] ARM: OMAP2+: CLEANUP: Add new config option for different DPLL features   Hiremath, Vaibhav
• [PATCH] ARM: OMAP2+: am33xx: Make am33xx as a separate class   Hiremath, Vaibhav
• [PATCH] ARM: OMAP2+: irq: Increase no of supported interrupts to 128   Hiremath, Vaibhav
• [PATCH 3/3] ARM: OMAP2+: Kconfig: convert SOC_OMAPAM33XX to SOC_AM33XX   Hiremath, Vaibhav
• [PATCH-V2] ARM: OMAP2+: am33xx: Make am33xx as a separate class   Vaibhav Hiremath
• [GIT PULL] ARM: OMAP2+: Misc cleanup   Hiremath, Vaibhav
• [RESUBMIT PATCH] ARM: OMAP2+: am33xx: Add low level debugging support   Vaibhav Hiremath
• [PATCH-V2] ARM: OMAP2+: am33xx: Make am33xx as a separate class   Hiremath, Vaibhav
• [PATCH 1/4] ARM: OMAP2+: Introduce CONFIG_SOC_HAS_OMAP_DPLL macro   Hiremath, Vaibhav
• [PATCH-V2] ARM: OMAP2+: am33xx: Make am33xx as a separate class   Hiremath, Vaibhav
• [PATCH] ARM: OMAP2+: am33xx: Add AM335XEVM machine support   Vaibhav Hiremath
• [PATCH-V2 4/4] ARM: OMAP2+: CLEANUP: Add new config option for different DPLL features   Hiremath, Vaibhav
• [PATCH] ARM: OMAP2+: CLEANUP: Remove ARCH_OMAPx ifdef from struct dpll_data   Vaibhav Hiremath
• [PATCH-V2 3/4] ARM: OMAP2+: CLEANUP: Remove unnecessary ifdef around __omap2_set_globals   Hiremath, Vaibhav
• [PATCH 1/4] ARM: OMAP2+: Introduce CONFIG_SOC_HAS_OMAP_DPLL macro   Hiremath, Vaibhav
• [PATCH-V2 3/4] ARM: OMAP2+: CLEANUP: Remove unnecessary ifdef around __omap2_set_globals   Hiremath, Vaibhav
• [PATCH] ARM: OMAP2+: irq: Increase no of supported interrupts to 128   Hiremath, Vaibhav
• [PATCH-V7 0/3] ARM: OMAP: Make OMAP clocksource source selection runtime   Hiremath, Vaibhav
• [PATCH-V2 2/4] ARM: OMAP2+: CLEANUP: Move omap3 dpll ops to dpll3xxx.c   Hiremath, Vaibhav
• [GIT PULL] ARM: OMAP2+: Add AM335x and AM3517/05 EVM DT support   Hiremath, Vaibhav
• [PATCH-V2 3/4] ARM: OMAP2+: CLEANUP: Remove unnecessary ifdef around __omap2_set_globals   Hiremath, Vaibhav
• [PATCH] ARM: OMAP2+: CLEANUP: Remove ARCH_OMAPx ifdef from struct dpll_data   Hiremath, Vaibhav
• [GIT PULL] ARM: OMAP2+: Add AM335x and AM3517/05 EVM DT support   Hiremath, Vaibhav
• [PATCH-V3 3/3] ARM: OMAP3+: clock33xx: Add AM33XX clock tree data   Hiremath, Vaibhav
• [PATCH-V3 3/3] ARM: OMAP3+: clock33xx: Add AM33XX clock tree data   Hiremath, Vaibhav
• [PATCH-V3 3/3] ARM: OMAP3+: clock33xx: Add AM33XX clock tree data   Hiremath, Vaibhav
• [PATCH] ARM: OMAP2+: am33xx: Add AM335XEVM machine support   Hiremath, Vaibhav
• [RESUBMIT PATCH] ARM: OMAP2+: am33xx: Add low level debugging support   Hiremath, Vaibhav
• [GIT PULL] ARM: OMAP2+: Add AM335x and AM3517/05 EVM DT support   Hiremath, Vaibhav
• [PATCH-V4 2/4] ARM: OMAP3/4: omap_hwmod: Add rstst_off field to struct omap_hwmod_omap4_prcm   Hiremath, Vaibhav
• [PATCH-V2 0/4] ARM: OMAP2+: am33xx: Add clocktree and hwmod data   Vaibhav Hiremath
• [PATCH-V2 1/4] ARM: OMAP2+: hwmod: Hook-up am33xx support in omap_hwmod framework   Vaibhav Hiremath
• [PATCH-V2 2/4] ARM: OMAP3+: clock: Move common clksel_rate & clock data to common file   Vaibhav Hiremath
• [PATCH-V2 3/4] ARM: OMAP3+: clock33xx: Add AM33XX clock tree data   Vaibhav Hiremath
• [PATCH-V2 4/4] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data   Vaibhav Hiremath
• [PATCH 1/7] mmc: dw_mmc: lookup for optional biu and ciu clocks   James Hogan
• [PATCH 3/7] mmc: dw_mmc: add device tree support   James Hogan
• [PATCH] mach-shmobile: Emma Mobile EV2 SMP prototype code   Simon Horman
• [PATCH] mach-shmobile: Emma Mobile EV2 SMP prototype code   Simon Horman
• [PATCH 00/08] mach-shmobile: Emma Mobile EV2 support V3   Simon Horman
• [PATCH 00/08] mach-shmobile: Emma Mobile EV2 support V3   Simon Horman
• [PATCH 00/08] mach-shmobile: Emma Mobile EV2 support V3   Simon Horman
• [PATCH 0/5] ARM: OMAP2+: PM: implement a caching mechanism on the power domains state registers   Jon Hunter
• [PATCH 2/5] ARM: OMAP2+: PM: use the power domains registers cache for the power states   Jon Hunter
• [PATCH 3/5] ARM: OMAP2+: PM: use the power domains registers cache for the logic and mem states   Jon Hunter
• [PATCH v4 01/39] ARM: OMAP2+: gpmc: driver conversion   Jon Hunter
• [PATCH v4 02/39] ARM: OMAP2+: gpmc: Adapt to HWMOD   Jon Hunter
• [PATCH v4 04/39] ARM: OMAP2+: gpmc: Acquire NAND CS value   Jon Hunter
• [PATCH-V6 0/3] ARM: OMAP: Make OMAP clocksource source selection runtime   Jon Hunter
• [PATCH-V6 0/3] ARM: OMAP: Make OMAP clocksource source selection runtime   Jon Hunter
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jon Hunter
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jon Hunter
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jon Hunter
• [PATCH v4 01/39] ARM: OMAP2+: gpmc: driver conversion   Jon Hunter
• [PATCH v4 01/39] ARM: OMAP2+: gpmc: driver conversion   Jon Hunter
• [PATCH v4 02/39] ARM: OMAP2+: gpmc: Adapt to HWMOD   Jon Hunter
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jon Hunter
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jon Hunter
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jon Hunter
• oprofile and ARM A9 hardware counter   Jon Hunter
• [PATCH v4 01/39] ARM: OMAP2+: gpmc: driver conversion   Jon Hunter
• [PATCH v4 02/39] ARM: OMAP2+: gpmc: Adapt to HWMOD   Jon Hunter
• [PATCH v4 01/39] ARM: OMAP2+: gpmc: driver conversion   Jon Hunter
• oprofile and ARM A9 hardware counter   Jon Hunter
• [PATCH v4 01/39] ARM: OMAP2+: gpmc: driver conversion   Jon Hunter
• [PATCH v4 02/39] ARM: OMAP2+: gpmc: Adapt to HWMOD   Jon Hunter
• oprofile and ARM A9 hardware counter   Jon Hunter
• oprofile and ARM A9 hardware counter   Jon Hunter
• oprofile and ARM A9 hardware counter   Jon Hunter
• oprofile and ARM A9 hardware counter   Jon Hunter
• oprofile and ARM A9 hardware counter   Jon Hunter
• oprofile and ARM A9 hardware counter   Jon Hunter
• oprofile and ARM A9 hardware counter   Jon Hunter
• oprofile and ARM A9 hardware counter   Jon Hunter
• oprofile and ARM A9 hardware counter   Jon Hunter
• oprofile and ARM A9 hardware counter   Jon Hunter
• oprofile and ARM A9 hardware counter   Jon Hunter
• oprofile and ARM A9 hardware counter   Jon Hunter
• oprofile and ARM A9 hardware counter   Jon Hunter
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jon Hunter
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jon Hunter
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jon Hunter
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jon Hunter
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jon Hunter
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jon Hunter
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jon Hunter
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jon Hunter
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jon Hunter
• [PATCH 0/3] omap3/omap4: add device tree support for wdt   Jon Hunter
• [PATCH 1/3] arm/dts: add wdt node for omap3 and omap4   Jon Hunter
• [PATCH 2/3] OMAP: avoid build wdt platform device if with dt support   Jon Hunter
• [PATCH 3/3] watchdog: omap_wdt: add device tree support   Jon Hunter
• [PATCH 1/3] arm/dts: add wdt node for omap3 and omap4   Jon Hunter
• [PATCH 3/3] watchdog: omap_wdt: add device tree support   Jon Hunter
• [PATCH 3/3] watchdog: omap_wdt: add device tree support   Jon Hunter
• [PATCH 1/3] arm/dts: add wdt node for omap3 and omap4   Jon Hunter
• [PATCHv3 8/9] ARM: OMAP3: prevent per_clkdm from attempting manual domain transitions   Jon Hunter
• [PATCH] net: davinci_emac: Add pre_open, post_stop platform callbacks   Ben Hutchings
• [STABLE PATCH] ARM: 7409/1: Do not call flush_cache_user_range with mmap_sem held   Ben Hutchings
• [RFC PATCH 0/5] omap: add ocp2scp as a misc driver   Kishon Vijay Abraham I
• [RFC PATCH 1/5] arm: omap: hwmod: make *phy_48m* as the main_clk of ocp2scp   Kishon Vijay Abraham I
• [RFC PATCH 2/5] arm: omap: remove ocp2scp_usb_phy_ick clock node   Kishon Vijay Abraham I
• [RFC PATCH 3/5] drivers: misc: omap: add a new driver for ocp2scp   Kishon Vijay Abraham I
• [RFC PATCH 4/5] ARM: OMAP4: add _dev_attr_ to ocp2scp for representing usb_phy   Kishon Vijay Abraham I
• [RFC PATCH 5/5] arm: omap: ocp2scp: create omap device for ocp2scp   Kishon Vijay Abraham I
• [RFC PATCH 0/3] usb: musb: add new phy driver   Kishon Vijay Abraham I
• [RFC PATCH 1/3] drivers: usb: otg: add a new driver for omap usb2 phy   Kishon Vijay Abraham I
• [RFC PATCH 2/3] usb: musb: omap glue: use omap-usb2 as the phy driver   Kishon Vijay Abraham I
• [RFC PATCH 3/3] arm: omap: phy: remove unused functions from omap-phy-internal.c   Kishon Vijay Abraham I
• [PATCH v2] gpio/omap: fix incorrect initialization of omap_gpio_mod_init   Grazvydas Ignotas
• [PATCH] ARM: OMAP2+: remove incorrect irq_chip ack field   Grazvydas Ignotas
• [PATCH V3 00/10] PM: Create the AVS(Adaptive Voltage Scaling)   J, KEERTHY
• [PATCH V3 00/10] PM: Create the AVS(Adaptive Voltage Scaling)   J, KEERTHY
• [PATCH V3 04/10] ARM: OMAP3: hwmod: rename the smartreflex entries   J, KEERTHY
• [PATCH V3 05/10] ARM: OMAP2+: SmartReflex: introduce a busy loop condition test macro   J, KEERTHY
• [PATCH V3 04/10] ARM: OMAP3: hwmod: rename the smartreflex entries   J, KEERTHY
• [PATCH V3 00/10] PM: Create the AVS(Adaptive Voltage Scaling)   J, KEERTHY
• [PATCH V3 05/10] ARM: OMAP2+: SmartReflex: introduce a busy loop condition test macro   J, KEERTHY
• [PATCH V3 07/10] ARM: OMAP2+: SmartReflex: Use per-OPP data structure   J, KEERTHY
• [PATCH V3 00/10] PM: Create the AVS(Adaptive Voltage Scaling)   J, KEERTHY
• [PATCH V3 00/10] PM: Create the AVS(Adaptive Voltage Scaling)   J, KEERTHY
• [PATCH V3 00/10] PM: Create the AVS(Adaptive Voltage Scaling)   J, KEERTHY
• [PATCH 2/2] pcm038 lcdc support   Adam Jackson
• [PATCH] ARM: mach-pxa: Use REGULATOR_SUPPLY macro   Robert Jarzmik
• [GIT PULL] ARM: orion/dove: v3.4 fixes   Jason
• [PATCH 2/3] ARM: mx28: Add SPI resources   Jean-Paul
• [PATCH v2 6/6] mmc: dw_mmc: add samsung exynos5250 specific extentions   Seungwon Jeon
• Compile err with raumfeld_defconfig   Xiao Jiang
• [PATCH 3/3] watchdog: omap_wdt: add device tree support   Xiao Jiang
• [PATCH 1/3] arm/dts: add wdt node for omap3 and omap4   Xiao Jiang
• [PATCH 3/3] watchdog: omap_wdt: add device tree support   Xiao Jiang
• [PATCH 0/3] omap3/omap4: add device tree support for wdt   Xiao Jiang
• [PATCH 3/3] watchdog: omap_wdt: add device tree support   Xiao Jiang
• [PATCH 1/3] arm/dts: add wdt node for omap3 and omap4   Xiao Jiang
• [PATCH 19/20] ARM: Exynos5: Add combiner, wakeup interrupt controller and ethernet nodes   Olof Johansson
• [PATCH 3/7] mmc: dw_mmc: add device tree support   Olof Johansson
• [PATCH 4/7] mmc: dw_mmc: add samsung exynos5250 specific extentions   Olof Johansson
• [PATCH 18/20] ARM: dts: Update device tree source files for EXYNOS5250   Olof Johansson
• [PATCH 1/1] ARM: tegra: Add Tegra Memory Controller(MC) driver   Olof Johansson
• [PATCH] mfd: da9052: fix of_match_node() arguments   Olof Johansson
• [GIT PULL] omap fixes for v3.4-rc6   Olof Johansson
• [GIT PULL][for 3.4]pull request for fix branch in arch-pxa   Olof Johansson
• [GIT PULL] ARM: kirkwood: fixes for v3.4   Olof Johansson
• [GIT PULL] DaVinci fixes for v3.5   Olof Johansson
• [GIT PULL] msm-core changes for v3.5.   Olof Johansson
• [GIT PULL] [for 3.5] request pull of dt on arch-mmp   Olof Johansson
• [GIT PULL 1/5] omap sparse cleanup for v3.5 merge window   Olof Johansson
• [GIT PULL][for 3.5] pull request of board-specific branch in arch-pxa git tree   Olof Johansson
• [GIT PULL] i.MX Eukrea board patches   Olof Johansson
• [GIT PULL] omap fixes for v3.4-rc6, take2   Olof Johansson
• [GIT PULL] ARM: SoC fixes for 3.4   Olof Johansson
• [PATCH v9 00/19] Introduce a led trigger for CPU activity and consolidate LED driver in ARM   Olof Johansson
• [GIT PULL] SPEAr clk updates for v-3.5   Olof Johansson
• [GIT PULL] ARM: tegra: cleanup branch   Olof Johansson
• [GIT PULL] mxs: device tree support for v3.5   Olof Johansson
• [GIT PULL v2] DaVinci SoC support updates   Olof Johansson
• [GIT PULL v2] DaVinci fixes and cleanups for v3.5   Olof Johansson
• [GIT PULL] SPEAr clk updates for v-3.5   Olof Johansson
• [GIT PULL] ep93xx fixes for 3.5   Olof Johansson
• [GIT PULL] ep93xx cleanups for 3.5   Olof Johansson
• [GIT PULL] ep93xx cleanups for 3.5   Olof Johansson
• [GIT PULL 8/10] omap timer cleanup for v3.5 merge window   Olof Johansson
• [GIT PULL 1/10] omap non-critical fixes for v3.5 merge window   Olof Johansson
• [GIT PULL] arch/arm/mach-* late_initcall cleanup   Olof Johansson
• [GIT PULL 1/10] omap non-critical fixes for v3.5 merge window   Olof Johansson
• [GIT PULL] Urgent fixes (for v3.4 if possible) for Renesas ARM-based platforms   Olof Johansson
• [GIT PULL] few omap fixups for v3.5 merge window   Olof Johansson
• [GIT PULL] Renesas ARM-based platforms updates for v3.5   Olof Johansson
• [GIT PULL] msm-core changes for v3.5, take 2   Olof Johansson
• [PATCH v2] arm: msm: fix up very basic HTC Sapphire support   Olof Johansson
• [GIT PULL] Urgent fixes (for v3.4 if possible) for Renesas ARM-based platforms   Olof Johansson
• [GIT PULL] Urgent fixes (for v3.4 if possible) for Renesas ARM-based platforms   Olof Johansson
• [GIT PULL] Adopt pinctrl support for imx and mxs drivers   Olof Johansson
• [GIT PULL] imx device tree changes for v3.5   Olof Johansson
• [GIT PULL] ep93xx fixes for 3.5   Olof Johansson
• [PATCH 3/7] mmc: dw_mmc: add device tree support   Olof Johansson
• [GIT PULL] Samsung fixes for v3.4   Olof Johansson
• [GIT PULL][Update x2] Urgent fixes (for v3.4 if possible) for Renesas ARM-based platforms   Olof Johansson
• [GIT PULL] Samsung fixes for v3.4   Olof Johansson
• [GIT PULL] Samsung fixes for v3.4   Olof Johansson
• [GIT PULL] Renesas ARM-based platforms updates for v3.5   Olof Johansson
• [GIT PULL] ARM: SoC fixes for 3.4   Olof Johansson
• [GIT PULL] Renesas ARM-based platforms: core SoC updates for v3.5   Olof Johansson
• [PATCH] ARM: EXYNOS: fix the hotplug for Cortex-A15   Olof Johansson
• [GIT PULL] Renesas ARM-based platforms: board support updates for v3.5   Olof Johansson
• [GIT PULL] Samsung cleanup for v3.5   Olof Johansson
• [GIT PULL] cleanup samsung plat-s3c24xx and s5p for v3.5   Olof Johansson
• [GIT PULL] Samsung devel-1 for v3.5   Olof Johansson
• [GIT PULL] Renesas ARM-based platforms: new boards support for v3.5   Olof Johansson
• [PATCH v9 00/19] Introduce a led trigger for CPU activity and consolidate LED driver in ARM   Olof Johansson
• [PATCH 0/9] ARM: dt: tegra: cleanup pass   Olof Johansson
• Pre-merge window status of the arm-soc tree   Olof Johansson
• Pre-merge window status of the arm-soc tree   Olof Johansson
• [GIT PULL] Renesas ARM-based platforms: new boards support for v3.5   Olof Johansson
• [PATCH 2/4] ARM: dt: tegra20.dtsi: Add Memory Controller(MC) nodes   Olof Johansson
• [GIT PULL][for 3.5] clk-next update   Olof Johansson
• [GIT PULL][for 3.5] clk-next update   Olof Johansson
• [PATCH] ARM: PRIMA2: fix irq domain size and IRQ mask of internal interrupt controller   Olof Johansson
• [GIT PULL] ARM: SoC fixes for 3.4   Olof Johansson
• [PATCH v9 00/19] Introduce a led trigger for CPU activity and consolidate LED driver in ARM   Olof Johansson
• [RFC] pl08x: don't use dma_slave_config direction argument   Olof Johansson
• [PATCH 19/20] ARM: Exynos5: Add combiner, wakeup interrupt controller and ethernet nodes   Olof Johansson
• [GIT PULL] Renesas sh73a0 fix for v3.5   Olof Johansson
• [GIT PULL][for 3.5] pull request of board-specific branch in arch-pxa   Olof Johansson
• [PATCH] mtd: nand: gpmi: fix compile error caused by pinctrl call   Olof Johansson
• [GIT PULL] Renesas Emma Mobile EV2 SoC and KZM9D board support for v3.5   Olof Johansson
• [GIT PULL] Samsung cleanup-2 for v3.5   Olof Johansson
• [GIT PULL] Samsung devel-2 for v3.5   Olof Johansson
• [GIT PULL] Samsung board-2 for v3.5   Olof Johansson
• [GIT PULL 0/8] First batch of arm-soc branches for 3.5   Olof Johansson
• [GIT PULL 1/8] arm-soc: updates for MAINTAINERS file   Olof Johansson
• [GIT PULL 2/8] arm-soc: First batch of cleanups   Olof Johansson
• [GIT PULL 3/8] arm-soc: non-critical bug fixes   Olof Johansson
• [GIT PULL 4/8] arm-soc: device tree conversions, part 1   Olof Johansson
• [GIT PULL 5/8] arm-soc: support for new SoCs   Olof Johansson
• [GIT PULL 6/8] arm-soc: soc-specific pinctrl changes   Olof Johansson
• [GIT PULL 7/8] arm-soc: power management changes   Olof Johansson
• [GIT PULL 8/8] arm-soc: board specific changes   Olof Johansson
• Bad ux500 merge fix leads to linux-next failure   Olof Johansson
• [GIT PULL 0/8] Second batch of arm-soc branches for 3.5   Olof Johansson
• [GIT PULL 1/8] arm-soc: defconfig updates   Olof Johansson
• [GIT PULL 2/8] arm-soc: driver specific updates   Olof Johansson
• [GIT PULL 3/8] arm-soc: cleanups, part 2   Olof Johansson
• [GIT PULL 4/8] arm-soc: clock driver changes   Olof Johansson
• [GIT PULL 5/8] arm-soc: add stmp-dev library code   Olof Johansson
• [GIT PULL 6/8] arm-soc: device tree conversions, part 2   Olof Johansson
• [GIT PULL 7/8] arm-soc: soc specific changes, part 2   Olof Johansson
• [GIT PULL 8/8] arm-soc: sweeping late_initcall cleanup   Olof Johansson
• [GIT PULL] Veratile Express DT updates for v3.5   Olof Johansson
• [GIT PULL 4/8] arm-soc: clock driver changes   Olof Johansson
• [PATCH 02/10] spi: s3c64xx: move controller information into driver data   Olof Johansson
• [PATCH v2 4/6] ARM: Samsung: Modify s3c64xx_spi{0|1|2}_set_platdata function   Olof Johansson
• [PATCH] ARM: LPC32xx: Adjust dts files to gpio dt binding   Olof Johansson
• [GIT PULL] arm-soc: late-merged development and first fixes   Olof Johansson
• [GIT PULL] i.MX common clock fixes   Olof Johansson
• [GIT PULL] at91: platform data for atmel-mci (for 3.5)   Olof Johansson
• [GIT PULL] i.MX common clock fixes   Olof Johansson
• Development tree for Cortex-A15?   Jemma Jones
• Development tree for Cortex-A15?   Jemma Jones
• Development tree for Cortex-A15?   Jemma Jones
• Development tree for Cortex-A15?   Jemma Jones
• Development tree for Cortex-A15?   Jemma Jones
• Development tree for Cortex-A15?   Jemma Jones
• Development tree for Cortex-A15?   Jemma Jones
• Development tree for Cortex-A15?   Jemma Jones
• [PATCH 6.2/7] MMC: mmci: Enable Device Tree support for ux500   Lee Jones
• [PATCH 6.2/7] MMC: mmci: Enable Device Tree support for ux500   Lee Jones
• [PATCH 6.2/7] MMC: mmci: Enable Device Tree support for ux500   Lee Jones
• [PATCH 6.2/7] MMC: mmci: Enable Device Tree support for ux500   Lee Jones
• [PATCH 6.2/7] MMC: mmci: Enable Device Tree support for ux500   Lee Jones
• [PATCH 6.2/7] MMC: mmci: Enable Device Tree support for ux500   Lee Jones
• [PATCH 6.2/7] MMC: mmci: Enable Device Tree support for ux500   Lee Jones
• [PATCH 6.2/7] MMC: mmci: Enable Device Tree support for ux500   Lee Jones
• [PATCH 12/15] mfd/db8500-prcmu: Register as a platform driver instead of only probing   Lee Jones
• [PATCH 14/15] mfd/db8500-prcmu: Add Device Tree support and enable ux500 platforms   Lee Jones
• [PATCH 04/15] drivers/net: Do not free an IRQ if its request failed   Lee Jones
• [PATCH 00/15] DT enablement for Snowball   Lee Jones
• [PATCH 01/15] i2c/busses: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• [PATCH 02/15] ARM: ux500: Remove unused i2c platform_data initialisation code   Lee Jones
• [PATCH 03/15] ARM: ux500: Provide auxdata to be used as name base clock search for nmk-i2c   Lee Jones
• [PATCH 04/15] ARM: ux500: CONFIG: Compile in support for leds-gpio   Lee Jones
• [PATCH 05/15] ARM: ux500: Enable the user LED on Snowball via Device Tree   Lee Jones
• [PATCH 06/15] mfd/ab8500: Remove confusing ab8500-i2c file and merge into ab8500-core   Lee Jones
• [PATCH 07/15] drivers/power: Carry out platform_data error checking on ab8500 devices   Lee Jones
• [PATCH 08/15] ARM: ux500: PRCMU related configuration and layout corrections for Device Tree   Lee Jones
• [PATCH 09/15] drivers/mfd: Enable Device Tree support for the db8500-prcmu   Lee Jones
• [PATCH 10/15] drivers/mfd: db8500-prcmu: Add support for regulator supply for nmk-i2c.4   Lee Jones
• [PATCH 11/15] drivers/mfd: Enable Device Tree for ab8500-core driver   Lee Jones
• [PATCH 12/15] drivers/regulator: ab8500: Split up probe() into manageable pieces   Lee Jones
• [PATCH 13/15] ARM: ux500: Add support for ab8500 regulators into the Device Tree   Lee Jones
• [PATCH 14/15] drivers/regulators: Enable the ab8500 for Device Tree   Lee Jones
• [PATCH 15/15] ARM: ux500: Disable platform setup of the ab8500 when DT is enabled   Lee Jones
• [PATCH 04/15] drivers/net: Do not free an IRQ if its request failed   Lee Jones
• [PATCH 06/15] mfd/ab8500: Remove confusing ab8500-i2c file and merge into ab8500-core   Lee Jones
• [PATCH 01/15] i2c/busses: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• [PATCH 01/15] i2c/busses: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• [PATCH 06/15] mfd/ab8500: Remove confusing ab8500-i2c file and merge into ab8500-core   Lee Jones
• [PATCH 12/15] drivers/regulator: ab8500: Split up probe() into manageable pieces   Lee Jones
• [PATCH 6.2/7] MMC: mmci: Enable Device Tree support for ux500   Lee Jones
• [PATCH 14/15] drivers/regulators: Enable the ab8500 for Device Tree   Lee Jones
• [PATCH 14/15] drivers/regulators: Enable the ab8500 for Device Tree   Lee Jones
• [PATCH 6.2/7] MMC: mmci: Enable Device Tree support for ux500   Lee Jones
• [PATCH 14/15] drivers/regulators: Enable the ab8500 for Device Tree   Lee Jones
• [PATCH 14/15] drivers/regulators: Enable the ab8500 for Device Tree   Lee Jones
• [PATCH 02/15] ARM: ux500: Remove unused i2c platform_data initialisation code   Lee Jones
• [PATCH 04/15] ARM: ux500: CONFIG: Compile in support for leds-gpio   Lee Jones
• [PATCH 07/15] drivers/power: Carry out platform_data error checking on ab8500 devices   Lee Jones
• [PATCH 08/15] ARM: ux500: PRCMU related configuration and layout corrections for Device Tree   Lee Jones
• [PATCH 11/15] drivers/mfd: Enable Device Tree for ab8500-core driver   Lee Jones
• [PATCH 4/7] drivers/gpio: gpio-nomadik: Provide documentation for Device Tree bindings   Lee Jones
• [PATCH 06/15] mfd/ab8500: Remove confusing ab8500-i2c file and merge into ab8500-core   Lee Jones
• [PATCH 11/15] drivers/mfd: Enable Device Tree for ab8500-core driver   Lee Jones
• [PATCH 14/15] drivers/regulators: Enable the ab8500 for Device Tree   Lee Jones
• [PATCH 14/15] drivers/regulators: Enable the ab8500 for Device Tree   Lee Jones
• [PATCH 14/15] drivers/regulators: Enable the ab8500 for Device Tree   Lee Jones
• [PATCH 7.2/15] ARM: ux500: Disable SMSC911x platform code registration when DT is enabled   Lee Jones
• [PATCH 7.2/15] ARM: ux500: Disable SMSC911x platform code registration when DT is enabled   Lee Jones
• [PATCH 7.2/15] ARM: ux500: Disable SMSC911x platform code registration when DT is enabled   Lee Jones
• [PATCH 7.2/15] ARM: ux500: Disable SMSC911x platform code registration when DT is enabled   Lee Jones
• [PATCH 00/18] DT enablement for Snowball   Lee Jones
• [PATCH 01/18] i2c: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• [PATCH 02/18] ARM: ux500: Remove unused i2c platform_data initialisation code   Lee Jones
• [PATCH 03/18] ARM: ux500: Provide auxdata to be used as name base clock search for nmk-i2c   Lee Jones
• [PATCH 04/18] ARM: ux500: CONFIG: Compile in support for leds-gpio   Lee Jones
• [PATCH 05/18] ARM: ux500: Enable the user LED on Snowball via Device Tree   Lee Jones
• [PATCH 06/18] mfd: ab8500: Remove confusing ab8500-i2c file and merge into ab8500-core   Lee Jones
• [PATCH 07/18] ARM: ux500: PRCMU related configuration and layout corrections for Device Tree   Lee Jones
• [PATCH 08/18] mfd: Enable Device Tree for ab8500-core driver   Lee Jones
• [PATCH 09/18] regulator: ab8500: Split up probe() into manageable pieces   Lee Jones
• [PATCH 10/18] ARM: ux500: Add support for ab8500 regulators into the Device Tree   Lee Jones
• [PATCH 11/18] regulator: Enable the ab8500 for Device Tree   Lee Jones
• [PATCH 12/18] ARM: ux500: Disable platform setup of the ab8500 when DT is enabled   Lee Jones
• [PATCH 13/18] ARM: ux500: Apply ab8500-debug node do the db8500 DT structure   Lee Jones
• [PATCH 14/18] mfd: Enable ab8500-debug when Device Tree is enabled   Lee Jones
• [PATCH 15/18] mfd: Prevent unassigned pointer from being used in ab8500-gpadc driver   Lee Jones
• [PATCH 16/18] ARM: ux500: Add a ab8500-gpadc node to the db8500 Device Tree   Lee Jones
• [PATCH 17/18] mfd: Enable ab8500-gpadc driver for Device Tree   Lee Jones
• [PATCH 18/18] ARM: ux500: Add support for input/ponkey into the db8500's Device Tree   Lee Jones
• [PATCH 00/18] DT enablement for Snowball   Lee Jones
• [PATCH 12/18] ARM: ux500: Disable platform setup of the ab8500 when DT is enabled   Lee Jones
• [PATCH 3/7] drivers/gpio: gpio-nomadik: Apply Device Tree bindings   Lee Jones
• [PATCH 11/18] regulator: Enable the ab8500 for Device Tree   Lee Jones
• [PATCH 09/18] regulator: ab8500: Split up probe() into manageable pieces   Lee Jones
• [PATCH 00/16] The last large installment of DT for Snowball   Lee Jones
• [PATCH 01/16] Input: Add Device Tree support to the ab8500-ponkey driver   Lee Jones
• [PATCH 02/16] ARM: ux500: Enable LED heartbeat functionality on Snowball   Lee Jones
• [PATCH 03/16] ARM: ux500: Enable LED heartbeat functionality on Snowbal via DT   Lee Jones
• [PATCH 04/16] ARM: ux500: Only initialise STE's UIBs on boards which support them   Lee Jones
• [PATCH 05/16] regulator: db8500-prcmu: Separate regulator registration from probe   Lee Jones
• [PATCH 06/16] ARM: ux500: Apply db8500-prcmu regulator information to db8500 Device Tree   Lee Jones
• [PATCH 07/16] regulator: Enable Device Tree for the db8500-prcmu regulator driver   Lee Jones
• [PATCH 08/16] ARM: ux500: Allow PRCMU regulator to be probed during a DT enabled boot   Lee Jones
• [PATCH 09/16] ARM: ux500: Provide regulator support for SMSC911x via Device Tree   Lee Jones
• [PATCH 10/16] ARM: ux500: Add db8500 Device Tree node for ab8500-sysctrl   Lee Jones
• [PATCH 11/16] mfd: Enable Device Tree support in the ab8500-sysctrl driver   Lee Jones
• [PATCH 12/16] ARM: ux500: Add db8500 Device Tree node for misc/ab8500-pwm   Lee Jones
• [PATCH 13/16] mfd: Enable Device Tree support in the ab8500-pwm driver   Lee Jones
• [PATCH 14/16] ARM: ux500: Add a ab8500-usb Device Tree node for db8500 based devices   Lee Jones
• [PATCH 15/16] ARM: ux500: Add regulator support for nomadik-i2c into the db8500 Device Tree   Lee Jones
• [PATCH 16/16] ARM: ux500: Re-enable SMSC911x platform code registration during non-DT boots   Lee Jones
• [PATCH 12/18] ARM: ux500: Disable platform setup of the ab8500 when DT is enabled   Lee Jones
• [PATCH 12/18] ARM: ux500: Disable platform setup of the ab8500 when DT is enabled   Lee Jones
• db8500.dtsi: ab8500 at 5 reg property invalid length   Lee Jones
• [PATCH 06/18] mfd: ab8500: Remove confusing ab8500-i2c file and merge into ab8500-core   Lee Jones
• [PATCH 02/16] ARM: ux500: Enable LED heartbeat functionality on Snowball   Lee Jones
• [PATCH 04/16] ARM: ux500: Only initialise STE's UIBs on boards which support them   Lee Jones
• [PATCH 06/16] ARM: ux500: Apply db8500-prcmu regulator information to db8500 Device Tree   Lee Jones
• [PATCH 09/16] ARM: ux500: Provide regulator support for SMSC911x via Device Tree   Lee Jones
• [PATCH 15/16] ARM: ux500: Add regulator support for nomadik-i2c into the db8500 Device Tree   Lee Jones
• [PATCH 16/16] ARM: ux500: Re-enable SMSC911x platform code registration during non-DT boots   Lee Jones
• [PATCH 05/15] ARM: ux500: New DT:ed snowball_platform_devs for one-by-one device enablement   Lee Jones
• [PATCH 15/16] ARM: ux500: Add regulator support for nomadik-i2c into the db8500 Device Tree   Lee Jones
• [PATCH 15/16] ARM: ux500: Add regulator support for nomadik-i2c into the db8500 Device Tree   Lee Jones
• [PATCH 01/22] Fixes and clean-ups for Device Tree on Snowball   Lee Jones
• [PATCH 01/22] ARM: ux500: New DT:ed snowball_platform_devs for one-by-one device enablement   Lee Jones
• [PATCH 02/22] ARM: ux500: New DT:ed u8500_init_devices for one-by-one device enablement   Lee Jones
• [PATCH 03/22] ARM: ux500: Disable SMSC911x platform code registration when DT is enabled   Lee Jones
• [PATCH 04/22] ARM: ux500: Remove DB8500 PRCMU platform registration when DT is enabled   Lee Jones
• [PATCH 05/22] ARM: ux500: PRCMU related configuration and layout corrections for Device Tree   Lee Jones
• [PATCH 06/22] ARM: ux500: Re-enable SMSC911x platform code registration during non-DT boots   Lee Jones
• [PATCH 07/22] ARM: ux500: Use correct format for dynamic IRQ assignment   Lee Jones
• [PATCH 08/22] regulator: Change ab8500 match names to reflect Device Tree   Lee Jones
• [PATCH 09/22] regulator: Change db8500-prcmu match names to reflect Device Tree   Lee Jones
• [PATCH 10/22] ARM: ux500: Disable platform setup of the ab8500 when DT is enabled   Lee Jones
• [PATCH 11/22] ARM: ux500: Only initialise STE's UIBs on boards which support them   Lee Jones
• [PATCH 12/22] ARM: ux500: Apply db8500-prcmu regulator information to db8500 Device Tree   Lee Jones
• [PATCH 13/22] ARM: ux500: Allow PRCMU regulator to be probed during a DT enabled boot   Lee Jones
• [PATCH 14/22] ARM: ux500: Provide regulator support for SMSC911x via Device Tree   Lee Jones
• [PATCH 15/22] ARM: ux500: Add support for ab8500 regulators into the Device Tree   Lee Jones
• [PATCH 16/22] mfd: ab8500-gpadc: Enable IRQF_ONESHOT when requesting a threaded IRQ   Lee Jones
• [PATCH 17/22] rtc: ab8500-rtc: IRQF_ONESHOT when requesting a threaded IRQ   Lee Jones
• [PATCH 18/22] mfd: Remove redundant Kconfig entry   Lee Jones
• [PATCH 19/22] net/smsc911x: Repair broken failure paths   Lee Jones
• [PATCH 20/22] pinctrl-nomadik: Allow Device Tree driver probing   Lee Jones
• [PATCH 21/22] ARM: ux500: Enable probing of pinctrl through Device Tree   Lee Jones
• [PATCH 22/22] mfd: Enable DT probing of the DB8500 PRCMU   Lee Jones
• [PATCH 18/22] mfd: Remove redundant Kconfig entry   Lee Jones
• [PATCH 08/22] regulator: Change ab8500 match names to reflect Device Tree   Lee Jones
• [PATCH 08/22] regulator: Change ab8500 match names to reflect Device Tree   Lee Jones
• [PATCH 08/22] regulator: Change ab8500 match names to reflect Device Tree   Lee Jones
• [PATCH 08/22] regulator: Change ab8500 match names to reflect Device Tree   Lee Jones
• [PATCH RFC 2/3] i2c-nomadik: turn the platform driver to an amba driver   Lee Jones
• Linux Kernel boot up stops after message "Uncompressing Linux....done, booting the kernel"   K K
• Linux Kernel boot up stops after message "Uncompressing Linux....done, booting the kernel"   K K
• Booting stops with " Unable to handle kernel paging request at virtual address"   K K
• A good sub-architecture to base new ports on?   Volkan K.
• A good sub-architecture to base new ports on?   Volkan K.
• [PATCH v8 0/5] USB: LPC32xx device tree related OHCI and UDC patch series   Greg KH
• [PATCH v5 0/7] Add TI EMIF SDRAM controller driver   Greg KH
• [PATCH v5 0/7] Add TI EMIF SDRAM controller driver   Greg KH
• [PATCH v5 0/7] Add TI EMIF SDRAM controller driver   Greg KH
• [PATCH 1/3] ARM: tegra20: Make MC optional in Kconfig   Greg KH
• [PATCHv5] Add ADC driver for Atmel G20, G45 and X5 boards   Greg KH
• [PATCH v1 1/7] usb: chipidea: permit user select USB_EHCI_ROOT_HUB_TT   Greg KH
• [PATCH v1 0/7] preliminary work for adding imx6q_sabrelite usb support   Greg KH
• linux-next: manual merge of the arm-soc tree with the staging tree   Greg KH
• linux-next: manual merge of the arm-soc tree with the staging tree   Greg KH
• [PATCH] ARM: at91: Add ADC driver to at91sam9260/at91sam9g20 dtsi files   Greg KH
• [GIT PULL] Samsung usb stuff for v3.5   Greg KH
• [GIT PULL] Samsung usb stuff for v3.5   Greg KH
• [PATCH v2 01/12] usb: otg: add notify_connect_change callback   Greg KH
• [PATCH v2 01/12] usb: otg: add notify_connect_change callback   Greg KH
• [PATCH v2 01/12] usb: otg: add notify_connect_change callback   Greg KH
• [PATCH v2 01/12] usb: otg: add notify_connect_change callback   Greg KH
• [STABLE PATCH] ARM: 7409/1: Do not call flush_cache_user_range with mmap_sem held   Greg KH
• [PATCH v3 2/6] thermal: Add generic cpufreq cooling implementation   Amit Kachhap
• [PATCH v3 5/6] thermal: exynos: Register the tmu sensor with the kernel thermal layer   Amit Kachhap
• [PATCH v3 0/6] thermal: exynos: Add kernel thermal support for exynos platform   Amit Kachhap
• [PATCH v3 0/6] thermal: exynos: Add kernel thermal support for exynos platform   Amit Daniel Kachhap
• [PATCH v3 1/6] thermal: Add a new trip type to use cooling device instance number   Amit Daniel Kachhap
• [PATCH v3 2/6] thermal: Add generic cpufreq cooling implementation   Amit Daniel Kachhap
• [PATCH v3 3/6] hwmon: exynos4: Move thermal sensor driver to driver/thermal directory   Amit Daniel Kachhap
• [PATCH v3 4/6] thermal: exynos5: Add exynos5 thermal sensor driver support   Amit Daniel Kachhap
• [PATCH v3 5/6] thermal: exynos: Register the tmu sensor with the kernel thermal layer   Amit Daniel Kachhap
• [PATCH v3 6/6] ARM: exynos: Add thermal sensor driver platform data support   Amit Daniel Kachhap
• [PATCH] ixp4xx: fix compilation by adding gpiolib support   Imre Kaloz
• [PATCHv2 0/3] Add support for DRM display subsystem   Sachin Kamat
• [GIT PULL] Samsung devel-2 for v3.5   Sachin Kamat
• [PATCH] clk: Use a separate struct for holding init data.   Saravana Kannan
• [PATCH] clk: Use a separate struct for holding init data.   Saravana Kannan
• [PATCH] clk: Use a separate struct for holding init data.   Saravana Kannan
• [PATCH 3/5] clk: remove COMMON_CLK_DISABLE_UNUSED   Saravana Kannan
• [PATCH 5/5] clk: add a fixed factor clock   Saravana Kannan
• [PATCH 5/5] clk: add a fixed factor clock   Saravana Kannan
• moving Tegra30 to the common clock framework   Saravana Kannan
• moving Tegra30 to the common clock framework   Saravana Kannan
• moving Tegra30 to the common clock framework   Saravana Kannan
• [PATCH] clk: Fix race conditions between clk_set_parent() and clk_enable()   Saravana Kannan
• moving Tegra30 to the common clock framework   Saravana Kannan
• moving Tegra30 to the common clock framework   Saravana Kannan
• [PATCH] clk: Constify struct clk_init_data   Saravana Kannan
• [PATCH] clk: Constify struct clk_init_data   Saravana Kannan
• moving Tegra30 to the common clock framework   Saravana Kannan
• [PATCH] clk: Constify struct clk_init_data   Saravana Kannan
• [PATCH] clk: Constify struct clk_init_data   Saravana Kannan
• [PATCH] clk: Fix race conditions between clk_set_parent() and clk_enable()   Saravana Kannan
• [PATCH] clk: Fix race conditions between clk_set_parent() and clk_enable()   Saravana Kannan
• [PATCH] clk: Fix race conditions between clk_set_parent() and clk_enable()   Saravana Kannan
• [PATCH] clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate().   Saravana Kannan
• [GIT PULL] DT clk binding support   Saravana Kannan
• [GIT PULL] DT clk binding support   Saravana Kannan
• [GIT PULL] DT clk binding support   Saravana Kannan
• [RFC PATCH] clk: add extension API   Saravana Kannan
• [PATCH] clk: Fix race conditions between clk_set_parent() and clk_enable()   Saravana Kannan
• [PATCH 2/2] clk: Add support for rate table based dividers   Saravana Kannan
• [RFC PATCH] clk: add extension API   Saravana Kannan
• [PATCH 3/5] ARM: S3C24XX: move plat-s3c24xx/dev-uart.c into common.c   Kukjin Kim
• [PATCH 2/5] ARM: S3C24XX: move plat-s3c24xx/irq.c into common.c   Kukjin Kim
• [PATCH] ARM: EXYNOS: Add platform resource definitions for FIMC-LITE   Kukjin Kim
• CPUFREQ maintainence.   Kukjin Kim
• [GIT PULL] arch/arm/mach-* late_initcall cleanup   Kukjin Kim
• [PATCH] ARM: SAMSUNG: Fix the value of tcnt and tcmp for PWM   Kukjin Kim
• [PATCH 07/20] ARM: EXYNOS: Add pre-divider and fout mux clocks for bpll and mpll   Kukjin Kim
• [PATCH 00/20] ARM: Samsung: Add support for Exynos5250 Rev1.0   Kukjin Kim
• [PATCH] ARM: exynos: Adapt to cpuidle core time keeping and irq enable   Kukjin Kim
• [PATCH] ARM: exynos: Adapt to cpuidle core time keeping and irq enable   Kukjin Kim
• [PATCH] ARM: EXYNOS: fix the hotplug for Cortex-A15   Kukjin Kim
• [PATCH v2 0/4] ARM: S3C24XX: move some code from plat to mach directory   Kukjin Kim
• [PATCH v2 06/33] ARM: S3C24XX: dev-uart: Use common macro to define resources   Kukjin Kim
• [PATCH 00/33] Use common macro to define resources   Kukjin Kim
• [PATCH v2] ARM: Exynos4: read initial state of power domain from hw registers   Kukjin Kim
• [PATCH] ARM: Exynos4: add support for GATE BLOCK clocks   Kukjin Kim
• [PATCH] ARM: SAMSUNG: Fix for S3C2412 EBI memory mapping.   Kukjin Kim
• [PATCHv2 0/3] Add support for DRM display subsystem   Kukjin Kim
• [PATCH] ARM: EXYNOS: Add platform resource definitions for FIMC-LITE   Kukjin Kim
• [PATCHv2 0/3] Add support for DRM display subsystem   Kukjin Kim
• [PATCH] ARM: SAMSUNG: Fix for S3C2412 EBI memory mapping.   Kukjin Kim
• [PATCH] iommu/exynos: Add iommu driver for Exynos Platforms   Kukjin Kim
• [PATCH 1/2] iommu/exynos: fix runtime pm support   Kukjin Kim
• [GIT PULL] Samsung fixes for v3.4   Kukjin Kim
• [GIT PULL] Samsung cleanup for v3.5   Kukjin Kim
• [GIT PULL] cleanup samsung plat-s3c24xx and s5p for v3.5   Kukjin Kim
• [GIT PULL] Samsung fixes for v3.4   Kukjin Kim
• [GIT PULL] Samsung fixes for v3.4   Kukjin Kim
• [PATCHv2 0/3] Add support for DRM display subsystem   Kukjin Kim
• [PATCH] serial: samsung: Add support 4M baudrate for samsung serial   Kukjin Kim
• [PATCH 2/2] ARM: EXYNOS5: Add support SPI for EXYNOS5250   Kukjin Kim
• [GIT PULL] Samsung devel-1 for v3.5   Kukjin Kim
• [GIT PULL] Samsung boards update for v3.5   Kukjin Kim
• [GIT PULL] cleanup samsung plat-s3c24xx and s5p for v3.5   Kukjin Kim
• [GIT PULL] Samsung devel-1 for v3.5   Kukjin Kim
• [PATCH] ARM: EXYNOS4: Support Suspend/Resume for EXYNOS4412   Kukjin Kim
• [PATCH 0/2] ARM: S3C64xx: cpuidle cleanups   Kukjin Kim
• [PATCH 07/20] ARM: EXYNOS: Add pre-divider and fout mux clocks for bpll and mpll   Kukjin Kim
• [GIT PULL] cleanup samsung plat-s3c24xx and s5p for v3.5   Kukjin Kim
• [PATCH 10/20] of/irq: fix interrupt parent lookup procedure   Kukjin Kim
• [PATCH 00/20] ARM: Samsung: Add support for Exynos5250 Rev1.0   Kukjin Kim
• [GIT PULL] Samsung boards update for v3.5   Kukjin Kim
• [PATCH 2/2] ARM: S3C64XX: Hook up carrier class modules on Cragganmore   Kukjin Kim
• [PATCH 1/2] ARM: S3C64XX: Initial hookup for Bells module on Cragganmore   Kukjin Kim
• [GIT PULL] Samsung devel-1 for v3.5   Kukjin Kim
• [GIT PULL] Samsung devel-2 for v3.5   Kukjin Kim
• [PATCH 2/2] ARM: S3C64XX: Hook up carrier class modules on Cragganmore   Kukjin Kim
• [GIT PULL] Samsung usb stuff for v3.5   Kukjin Kim
• [PATCH 1/2] ARM: EXYNOS: cosmetic: Rename exynos4 to exynos4210 in USB phy code   Kukjin Kim
• [GIT PULL] Samsung devel-2 for v3.5   Kukjin Kim
• [PATCH v2] serial: samsung: Fixed wrong comparison for baudclk_rate   Kukjin Kim
• [PATCH 0/2] ARM: S3C64xx: cpuidle cleanups   Kukjin Kim
• [PATCH 1/2] ARM: s3c64xx: cpuidle - declare the states with the new api   Kukjin Kim
• [PATCH] ARM: S3C24XX: add support for second irq set of S3C2416   Kukjin Kim
• [PATCH 1/2] ARM: s3c64xx: cpuidle - declare the states with the new api   Kukjin Kim
• [GIT PULL] Samsung cleanup-2 for v3.5   Kukjin Kim
• [GIT PULL] Samsung devel-2 for v3.5   Kukjin Kim
• [GIT PULL] Samsung board-2 for v3.5   Kukjin Kim
• [PATCH v2 2/6] spi: s3c64xx: move controller information into driver data   Kukjin Kim
• [PATCH 1/6] ARM: Exynos4: Fix the incorrect hierarchy of spi controller bus clock   Kukjin Kim
• [PATCH 2/6] ARM: Exynos5: Add spi clock support   Kukjin Kim
• [PATCH 5/6] ARM: dts: Add nodes for spi controllers for Samsung Exynos4 platforms   Kukjin Kim
• [PATCH 6/6] ARM: dts: Add nodes for spi controllers for Samsung Exynos5 platforms   Kukjin Kim
• [PATCH 1/2] ARM: EXYYNOS: Use EXYNOS4210_GPEx instead of EXYNOS4_GPEx   Kukjin Kim
• [PATCH 2/2] gpio/exynos: Add support for Exynos4x12 SoC   Kukjin Kim
• [PATCH] serial: samsung: Add support 4M baudrate for samsung serial   Kyoungil Kim
• [PATCH] serial: samsung: Fixed wrong comparison for baudclk_rate   Kyoungil Kim
• [PATCH] serial: samsung: Fixed wrong comparison for baudclk_rate   Kyoungil Kim
• [PATCH v2] serial: samsung: Fixed wrong comparison for baudclk_rate   Kyoungil Kim
• [PATCH 1/2] serial: samsung: Remove NULL checking for baud clock   Kyoungil Kim
• [PATCH 2/2] serial: samsung: Fixed wrong comparison for baudclk_rate   Kyoungil Kim
• [PATCH 1/2] serial: samsung: Remove NULL checking for baud clock   Kyoungil Kim
• [PATCH] serial: samsung: protect NULL dereference of clock name   Kyoungil Kim
• [PATCH] serial: samsung: protect NULL dereference of clock name   Kyoungil Kim
• [PATCH] drivers: cma: don't fail if migration returns -EAGAIN   Minchan Kim
• [PATCH] ARM: use common utility function in dma   Minchan Kim
• [PATCHv2 1/4] mm: vmalloc: use const void * for caller argument   Minchan Kim
• [PATCHv2 2/4] mm: vmalloc: export find_vm_area() function   Minchan Kim
• [PATCHv2 3/4] mm: vmalloc: add VM_DMA flag to indicate areas used by dma-mapping framework   Minchan Kim
• [PATCHv2 4/4] ARM: dma-mapping: remove custom consistent dma region   Minchan Kim
• [PATCH] arm: limit memblock base address for early_pte_alloc   Minchan Kim
• [PATCH 1/6] DMA: PL08x: move private data structures into amba-pl08x.c   Russell King
• [PATCH 2/6] DMA: PL08x: get src/dst addr direct from dma_slave_config struct   Russell King
• [PATCH 3/6] DMA: PL08x: get rid of device_fc in struct pl08x_dma_chan   Russell King
• [PATCH 4/6] DMA: PL08x: move the bus and increment selection to dma prepare function   Russell King
• [PATCH 5/6] DMA: PL08x: extract function to to generate cctl values   Russell King
• [PATCH 6/6] DMA: PL08x: ignore 'direction' argument in dma_slave_config   Russell King
• [RFC 01/34] dmaengine: split out virtual channel DMA support from sa11x0 driver   Russell King
• [RFC 02/34] dmaengine: virt-dma: vchan_find_desc()   Russell King
• [RFC 03/34] dmaengine: virt-dma: add support for cyclic DMA periodic callbacks   Russell King
• [RFC 04/34] dmaengine: PL08x: remove runtime PM support   Russell King
• [RFC 05/34] dmaengine: PL08x: fix missed dma_transfer_direction fixup   Russell King
• [RFC 06/34] dmaengine: PL08x: remove redundant spinlock   Russell King
• [RFC 07/34] dmaengine: PL08x: remove circular_buffer boolean from channel data   Russell King
• [RFC 08/34] dmaengine: PL08x: clean up get_signal/put_signal   Russell King
• [RFC 09/34] dmaengine: PL08x: move private data structures into amba-pl08x.c   Russell King
• [RFC 10/34] dmaengine: PL08x: constify channel names and bus_id strings   Russell King
• [RFC 11/34] dmaengine: PL08x: get src/dst addr direct from dma_slave_config struct   Russell King
• [RFC 12/34] dmaengine: PL08x: get rid of device_fc in struct pl08x_dma_chan   Russell King
• [RFC 13/34] dmaengine: PL08x: move the bus and increment selection to dma prepare function   Russell King
• [RFC 14/34] dmaengine: PL08x: extract function to to generate cctl values   Russell King
• [RFC 15/34] dmaengine: PL08x: ignore 'direction' argument in dma_slave_config   Russell King
• [RFC 16/34] dmaengine: PL08x: get rid of unnecessary checks in dma_slave_config   Russell King
• [RFC 17/34] dmaengine: PL08x: split DMA signal muxing from channel alloc   Russell King
• [RFC 18/34] dmaengine: PL08x: move DMA signal muxing into pl08x_dma_chan struct   Russell King
• [RFC 19/34] dmaengine: PL08x: track mux usage on a per-channel basis.   Russell King
• [RFC 20/34] dmaengine: PL08x: convert to a list of completed descriptors   Russell King
• [RFC 21/34] dmaengine: PL08x: move DMA signal muxing into slave prepare code   Russell King
• [RFC 22/34] dmaengine: PL08x: remove waiting descriptor pointer   Russell King
• [RFC 23/34] dmaengine: PL08x: re-jig the starting of txds   Russell King
• [RFC 24/34] dmaengine: PL08x: split the pend_list in two   Russell King
• [RFC 25/34] dmaengine: PL08x: start next descriptor from irq context   Russell King
• [RFC 26/34] dmaengine: PL08x: rejig physical channel allocation   Russell King
• [RFC 27/34] dmaengine: PL08x: convert to use virt-dma structs   Russell King
• [RFC 28/34] dmaengine: PL08x: use vchan's spinlock   Russell King
• [RFC 29/34] dmaengine: PL08x: convert to use vchan submitted/issued lists   Russell King
• [RFC 30/34] dmaengine: PL08x: convert to use vchan done list   Russell King
• [RFC 31/34] dmaengine: PL08x: fix tx_status function to return correct residue   Russell King
• [RFC 32/34] dmaengine: PL08x: get rid of pl08x_prep_channel_resources   Russell King
• [RFC 33/34] dmaengine: PL08x: get rid of write only pool_ctr and free_txd locking   Russell King
• [RFC 34/34] dmaengine: PL08x: ensure all descriptors are freed when channel is released   Russell King
• [PATCH 2/5] net: fec: adopt pinctrl API   Steven King
• [PATCH RESEND 3/5] can: flexcan: adopt pinctrl support   Marc Kleine-Budde
• [PATCH RESEND 3/5] can: flexcan: adopt pinctrl support   Marc Kleine-Budde
• [PATCH] ARM: imx: only specify i2c device type once   Uwe Kleine-König
• [PATCH] ARM: imx: Modify IMX_IO_P2V macro   Uwe Kleine-König
• Booting mx31 on linux-next-20120517   Uwe Kleine-König
• [PATCH] ARM: imx: only call l2x0_init if it's available   Uwe Kleine-König
• [PATCH] ARM: cache-l2x0: add a const qualifier   Uwe Kleine-König
• [PATCH] Drop superfluous setting of i2c_board_info.type   Uwe Kleine-König
• [PATCH v2] mtd mxc_nand: use 32bit copy functions   Uwe Kleine-König
• [linux-pm] [PATCH V3 00/10] PM: Create the AVS(Adaptive Voltage Scaling)   Koen Kooi
• ARM: ETH PHY Micrel: KSZ8051MNL Driver?   Peter Korsgaard
• ARM: ETH PHY Micrel: KSZ8051MNL Driver?   Peter Korsgaard
• Cyclic DMA - callback properties and tx_status residue   Vinod Koul
• [PATCH] dma: pl330: assign a new cookie when restarting tx descriptors in cyclic mode   Vinod Koul
• Cyclic DMA - callback properties and tx_status residue   Vinod Koul
• [PATCH 2/6] dma: mxs-dma: let dma_is_apbh and apbh_is_old take parameter   Vinod Koul
• [PATCH 2/6] dma: mxs-dma: let dma_is_apbh and apbh_is_old take parameter   Vinod Koul
• Cyclic DMA - callback properties and tx_status residue   Vinod Koul
• [PATCH V2 01/11] dma: imx-sdma: make channel0 operations atomic   Vinod Koul
• Cyclic DMA - callback properties and tx_status residue   Vinod Koul
• Cyclic DMA - callback properties and tx_status residue   Vinod Koul
• Cyclic DMA - callback properties and tx_status residue   Vinod Koul
• [PATCH V2 01/11] dma: imx-sdma: make channel0 operations atomic   Vinod Koul
• Cyclic DMA - callback properties and tx_status residue   Vinod Koul
• [PATCH] dmaengine: dw_dma: add Device Tree probing capability   Vinod Koul
• [PATCH] dma: imx-sdma: keep the callbacks invoked in the tasklet   Vinod Koul
• [PATCH V2 01/11] dma: imx-sdma: make channel0 operations atomic   Vinod Koul
• [alsa-devel] [PATCH Rebase 1/1] dma: imx-sdma: make channel0 operations atomic   Vinod Koul
• [GIT PULL] ep93xx fixes for 3.5   Vinod Koul
• [PATCH 0/3] dmaengine: at_hdmac: slave configuration   Vinod Koul
• [RFC 00/12] OMAP DMA engine conversion   Vinod Koul
• Cyclic DMA - callback properties and tx_status residue   Vinod Koul
• Cyclic DMA - callback properties and tx_status residue   Vinod Koul
• Cyclic DMA - callback properties and tx_status residue   Vinod Koul
• [RFC 00/12] OMAP DMA engine conversion   Vinod Koul
• [PATCH 2/4] ASoC: mmp: add audio dma support   Vinod Koul
• [alsa-devel] [PATCH 2/4] ASoC: mmp: add audio dma support   Vinod Koul
• [PATCHv4 6/8] ARM: OMAP4: PM: support ret_logic/mem_off_counters   Tero Kristo
• [PATCHv4 8/8] ARM: OMAP4: PM: Added option for enabling OSWR   Tero Kristo
• [PATCH 0/3] ARM: OMAP4: add support for TPS62361 PMIC   Tero Kristo
• [PATCH 1/3] ARM: OMAP4: VC: fix I2C timing   Tero Kristo
• [PATCH 2/3] ARM: OMAP3+: PM: introduce a central pmic control   Tero Kristo
• [PATCH 3/3] ARM: OMAP2+ PM: Add support for TPS62361   Tero Kristo
• [PATCH 3/3] ARM: OMAP2+ PM: Add support for TPS62361   Tero Kristo
• [PATCH 2/3] ARM: OMAP3+: PM: introduce a central pmic control   Tero Kristo
• [PATCHv4 6/8] ARM: OMAP4: PM: support ret_logic/mem_off_counters   Tero Kristo
• [PATCHv4 6/8] ARM: OMAP4: PM: support ret_logic/mem_off_counters   Tero Kristo
• [PATCHv4 6/8] ARM: OMAP4: PM: support ret_logic/mem_off_counters   Tero Kristo
• [PATCHv4 6/8] ARM: OMAP4: PM: support ret_logic/mem_off_counters   Tero Kristo
• [GIT PULL] ARM: OMAP3+: PRM/hwmod: fix and improve I/O chain wakeup support   Tero Kristo
• [PATCH 00/19] ARM: OMAP4 device off support   Tero Kristo
• [PATCH 02/19] ARM: OMAP4: PM: save/restore all CM1/2 settings in OFF mode   Tero Kristo
• [PATCHv5 0/8] ARM: OMAP4: core retention support   Tero Kristo
• [PATCHv5 1/8] ARM: OMAP4: suspend: Program all domains to retention   Tero Kristo
• [PATCHv5 2/8] TEMP: ARM: OMAP4: hwmod_data: Do not get DSP out of reset at boot time   Tero Kristo
• [PATCHv5 3/8] ARM: OMAP4460: Workaround for ROM bug because of CA9 r2pX gic control register change   Tero Kristo
• [PATCHv5 4/8] ARM: OMAP4: hwmod: flag hwmods/modules supporting module level context status   Tero Kristo
• [PATCHv5 5/8] ARM: OMAP: hwmod: Add support for per hwmod/module context lost count   Tero Kristo
• [PATCHv5 6/8] ARM: OMAP4: pwrdm: add support for reading prev logic and mem states   Tero Kristo
• [PATCHv5 7/8] ARM: OMAP4: PM: Add next_logic_state param to power_state   Tero Kristo
• [PATCHv5 8/8] ARM: OMAP4: PM: Added option for enabling OSWR   Tero Kristo
• [PATCHv2 00/19] ARM: OMAP4: device off support   Tero Kristo
• [PATCHv2 01/19] ARM: OMAP4: PM: powerdomain: Add HWSAR flag to L3INIT   Tero Kristo
• [PATCHv2 02/19] ARM: OMAP4: Add SAR ROM base address   Tero Kristo
• [PATCHv2 03/19] ARM: OMAP4: PM: Add device-off support   Tero Kristo
• [PATCHv2 04/19] ARM: OMAP4: PM: save/restore all DPLL settings in OFF mode   Tero Kristo
• [PATCHv2 05/19] ARM: OMAP4: PM: save/restore all CM1/2 settings in OFF mode   Tero Kristo
• [PATCHv2 06/19] ARM: OMAP4: PM: Add SAR backup support towards device OFF   Tero Kristo
• [PATCHv2 07/19] ARM: OMAP4: Auto generate SAR layout contents   Tero Kristo
• [PATCHv2 08/19] ARM: OMAP4: SAR: generate overwrite data based on SAR ROM contents   Tero Kristo
• [PATCHv2 09/19] ARM: OMAP4: PM: add errata support   Tero Kristo
• [PATCHv2 10/19] ARM: OMAP4: PM: Work-around for ROM code BUG of IVAHD/TESLA   Tero Kristo
• [PATCHv2 11/19] ARM: OMAP4: PM: save/restore CM L3INSTR registers when MPU hits OSWR/OFF mode   Tero Kristo
• [PATCHv2 12/19] ARM: OMAP4: PM: update ROM return address for OSWR and OFF   Tero Kristo
• [PATCHv2 13/19] ARM: OMAP4: PM: Mark the PPI and SPI interrupts as non-secure for GP   Tero Kristo
• [PATCHv2 14/19] ARM: OMAP4: wakeupgen: enable clocks for save_secure_all   Tero Kristo
• [PATCHv2 15/19] ARM: OMAP4430: PM: workaround for DDR corruption on second CS   Tero Kristo
• [PATCHv2 16/19] TEMP: ARM: OMAP4: prevent voltage transitions   Tero Kristo
• [PATCHv2 17/19] ARM: OMAP4: put cpu1 back to sleep if no wake request   Tero Kristo
• [PATCHv2 18/19] ARM: OMAP4460: wakeupgen: set GIC_CPU0 backup status flag always   Tero Kristo
• [PATCHv2 19/19] ARM: OMAP4: powerdomain: update mpu / core off counters during device off   Tero Kristo
• [PATCHv5 1/8] ARM: OMAP4: suspend: Program all domains to retention   Tero Kristo
• [PATCHv5 3/8] ARM: OMAP4460: Workaround for ROM bug because of CA9 r2pX gic control register change   Tero Kristo
• [PATCHv5 6/8] ARM: OMAP4: pwrdm: add support for reading prev logic and mem states   Tero Kristo
• [PATCHv5 8/8] ARM: OMAP4: PM: Added option for enabling OSWR   Tero Kristo
• [PATCHv2 02/19] ARM: OMAP4: Add SAR ROM base address   Tero Kristo
• [PATCHv2 03/19] ARM: OMAP4: PM: Add device-off support   Tero Kristo
• [PATCHv2 04/19] ARM: OMAP4: PM: save/restore all DPLL settings in OFF mode   Tero Kristo
• [PATCHv2 04/19] ARM: OMAP4: PM: save/restore all DPLL settings in OFF mode   Tero Kristo
• [PATCHv2 06/19] ARM: OMAP4: PM: Add SAR backup support towards device OFF   Tero Kristo
• [PATCHv2 10/19] ARM: OMAP4: PM: Work-around for ROM code BUG of IVAHD/TESLA   Tero Kristo
• [PATCHv2 18/19] ARM: OMAP4460: wakeupgen: set GIC_CPU0 backup status flag always   Tero Kristo
• [PATCHv2 12/19] ARM: OMAP4: PM: update ROM return address for OSWR and OFF   Tero Kristo
• [PATCHv2 13/19] ARM: OMAP4: PM: Mark the PPI and SPI interrupts as non-secure for GP   Tero Kristo
• [PATCHv2 14/19] ARM: OMAP4: wakeupgen: enable clocks for save_secure_all   Tero Kristo
• [PATCHv2 14/19] ARM: OMAP4: wakeupgen: enable clocks for save_secure_all   Tero Kristo
• [PATCHv2 17/19] ARM: OMAP4: put cpu1 back to sleep if no wake request   Tero Kristo
• [PATCHv4 4/8] ARM: OMAP4: hwmod: flag hwmods/modules supporting module level context status   Tero Kristo
• [PATCHv5 5/8] ARM: OMAP: hwmod: Add support for per hwmod/module context lost count   Tero Kristo
• [PATCH 0/3] ARM: OMAP4: add support for TPS62361 PMIC   Tero Kristo
• [PATCHv2 03/19] ARM: OMAP4: PM: Add device-off support   Tero Kristo
• [PATCHv2 09/19] ARM: OMAP4: PM: add errata support   Tero Kristo
• [PATCHv2 14/19] ARM: OMAP4: wakeupgen: enable clocks for save_secure_all   Tero Kristo
• [PATCHv2 14/19] ARM: OMAP4: wakeupgen: enable clocks for save_secure_all   Tero Kristo
• [PATCH 1/3] ARM: OMAP4: VC: fix I2C timing   Tero Kristo
• [PATCHv2 19/19] ARM: OMAP4: powerdomain: update mpu / core off counters during device off   Tero Kristo
• [PATCHv3 0/9] ARM: OMAP3+: pwrdm changes for usecounting   Tero Kristo
• [PATCHv3 1/9] ARM: OMAP: clk: add support for omap_clk_for_each   Tero Kristo
• [PATCHv3 2/9] ARM: OMAP3+: voltage/pwrdm/clkdm/clock add recursive usecount tracking   Tero Kristo
• [PATCHv3 3/9] ARM: OMAP3+: voltage: add support for voltagedomain usecounts   Tero Kristo
• [PATCHv3 4/9] ARM: OMAP3: add manual control for mpu / core pwrdm usecounting   Tero Kristo
• [PATCHv3 5/9] ARM: OMAP3: set autoidle flags for a few clocks   Tero Kristo
• [PATCHv3 6/9] ARM: OMAP: pm-debug: enhanced usecount debug support   Tero Kristo
• [PATCHv3 7/9] ARM: OMAP: clockdomain: add support for preventing domain transitions   Tero Kristo
• [PATCHv3 8/9] ARM: OMAP3: prevent per_clkdm from attempting manual domain transitions   Tero Kristo
• [PATCHv3 9/9] TEMP: ARM: OMAP3: prevent dpll4 manual enable / disable + prevent core clkdm idle   Tero Kristo
• [PATCHv6 00/14] ARM: OMAP3+: auto ret / auto off support   Tero Kristo
• [PATCHv6 01/14] ARM: OMAP3+: PM: VP: use uV for max and min voltage limits   Tero Kristo
• [PATCHv6 02/14] ARM: OMAP: voltage: renamed vp_vddmin and vp_vddmax fields   Tero Kristo
• [PATCHv6 03/14] ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains   Tero Kristo
• [PATCHv6 04/14] ARM: OMAP3: VC: calculate ramp times   Tero Kristo
• [PATCHv6 05/14] ARM: OMAP4: voltage: add support for VOLTSETUP_x_OFF register   Tero Kristo
• [PATCHv6 06/14] ARM: OMAP4: VC: calculate ramp times   Tero Kristo
• [PATCHv6 07/14] ARM: OMAP: add support for oscillator setup   Tero Kristo
• [PATCHv6 08/14] ARM: OMAP3+: vp: use new vp_params for calculating vddmin and vddmax   Tero Kristo
• [PATCHv6 09/14] ARM: OMAP3+: voltage: use oscillator data to calculate setup times   Tero Kristo
• [PATCHv6 10/14] ARM: OMAP: TWL: change the vddmin / vddmax voltages to spec   Tero Kristo
• [PATCHv6 11/14] TEMP: ARM: OMAP3: beagle rev-c4: enable OPP6   Tero Kristo
• [PATCHv6 12/14] ARM: OMAP: beagle: set oscillator startup time to 10ms for rev c4   Tero Kristo
• [PATCHv6 13/14] ARM: OMAP3: vc: auto_ret / auto_off support   Tero Kristo
• [PATCHv6 14/14] ARM: OMAP3+: voltage: remove unused volt_setup_time parameter   Tero Kristo
• [PATCH] usb: [ARM] fix unresolved err() reference in host/ohci-pxa27x.c   Greg Kroah-Hartman
• [RFC 1/1] Driver Core: don't oops with unregistered driver in driver_find_device()   Greg Kroah-Hartman
• [RFC 1/1] Driver Core: don't oops with unregistered driver in driver_find_device()   Greg Kroah-Hartman
• [PATCH 1/4] ARM: tegra20: Add Tegra Memory Controller(MC) driver   Greg Kroah-Hartman
• [PATCH 3/4] ARM: tegra30: Add Tegra Memory Controller(MC) driver   Greg Kroah-Hartman
• [RFC 1/1] Driver Core: don't oops with unregistered driver in driver_find_device()   Greg Kroah-Hartman
• [RFC 1/1] Driver Core: don't oops with unregistered driver in driver_find_device()   Greg Kroah-Hartman
• [PATCH] omap: dma: Clear status registers on enable/disable irq.   Janusz Krzysztofik
• [PATCH-V6 1/3] ARM: OMAP1: FIX: check possible error condition in timer_init   Janusz Krzysztofik
• [PATCH v2 3.4-rc6] MTD: NAND: ams-delta: fix request_mem_region() failure   Janusz Krzysztofik
• [PATCH 3.4-rc4] ARM: OMAP1: Amstrad Delta: Fix wrong IRQ base in FIQ handler   Janusz Krzysztofik
• [PATCH v2 3.4-rc6] MTD: NAND: ams-delta: fix request_mem_region() failure   Janusz Krzysztofik
• [PATCH v2] gpio/omap: fix incorrect initialization of omap_gpio_mod_init   Janusz Krzysztofik
• [PATCH-V7 0/3] ARM: OMAP: Make OMAP clocksource source selection runtime   Janusz Krzysztofik
• [PATCH] omap: dma: Clear status registers on enable/disable irq.   Janusz Krzysztofik
• [PATCH] ARM: OMAP1: USB: fix ocpi_enable compile problem on non-1610 builds   Janusz Krzysztofik
• [PATCH 00/18][V3] ARM: OMAP3/4 : cpuidle34xx and cpuidle44xx cleanups   Amit Kucheria
• [GIT PULL] ARM: SPEAr13xx support for 3.5   Viresh Kumar
• [PATCH V3 1/8] CLKDEV: Add helper routines to allocate and add clkdevs for given struct clk *   Viresh Kumar
• [PATCH] clk: Fix error handling paths of all basic clock register() routines   Viresh Kumar
• [PATCH] gpiolib: Add of_get_gpio_chip_by_phandle() helper   Viresh Kumar
• [PATCH V3 2/8] clk: add a fixed factor clock   Viresh Kumar
• [PATCH V3 2/8] clk: add a fixed factor clock   Viresh Kumar
• [PATCH V3 6/8] SPEAr: clk: Add General Purpose Timer Synthesizer clock   Viresh Kumar
• [PATCH V3 5/8] SPEAr: clk: Add Fractional Synthesizer clock   Viresh Kumar
• [PATCH V3 3/8] SPEAr: clk: Add VCO-PLL Synthesizer clock   Viresh Kumar
• [PATCH V3 4/8] SPEAr: clk: Add Auxiliary Synthesizer clock   Viresh Kumar
• [PATCH V3 2/8] clk: add a fixed factor clock   Viresh Kumar
• [PATCH V3 3/8] SPEAr: clk: Add VCO-PLL Synthesizer clock   Viresh Kumar
• [PATCH V3 4/8] SPEAr: clk: Add Auxiliary Synthesizer clock   Viresh Kumar
• [PATCH V3 5/8] SPEAr: clk: Add Fractional Synthesizer clock   Viresh Kumar
• [PATCH V3 6/8] SPEAr: clk: Add General Purpose Timer Synthesizer clock   Viresh Kumar
• [PATCH V4] clk: add a fixed factor clock   Viresh Kumar
• [PATCH V2 0/5] pinctrl: SPEAr Updates   Viresh Kumar
• [PATCH V2 1/5] pinctrl: SPEAr: Don't set all non muxreg bits on pinctrl_disable   Viresh Kumar
• [PATCH V2 2/5] pinctrl: SPEAr1310: Fix pin numbers for clcd_high_res   Viresh Kumar
• [PATCH V2 3/5] pinctrl: SPEAr: Add plgpio driver   Viresh Kumar
• [PATCH V2 4/5] pinctrl: SPEAr: Add gpio ranges support   Viresh Kumar
• [PATCH V2 5/5] SPEAr: Add plgpio node in device tree dtsi files   Viresh Kumar
• [PATCH 1/2] SPEAr: Add SMI NOR partition info in dts files   Viresh Kumar
• [PATCH 2/2] SPEAr: Update defconfigs   Viresh Kumar
• [PATCH 1/2] SPEAr: Add SMI NOR partition info in dts files   Viresh Kumar
• [PATCH V2 4/5] pinctrl: SPEAr: Add gpio ranges support   Viresh Kumar
• [PATCH V4] clk: add a fixed factor clock   Viresh Kumar
• [PATCH V3 0/5] pinctrl: SPEAr Updates   Viresh Kumar
• [PATCH V3 1/5] pinctrl: SPEAr: Don't set all non muxreg bits on pinctrl_disable   Viresh Kumar
• [PATCH V3 2/5] pinctrl: SPEAr1310: Fix pin numbers for clcd_high_res   Viresh Kumar
• [PATCH V3 3/5] pinctrl: SPEAr: Add plgpio driver   Viresh Kumar
• [PATCH V3 4/5] pinctrl: SPEAr: Add gpio ranges support   Viresh Kumar
• [PATCH V3 5/5] SPEAr: Add plgpio node in device tree dtsi files   Viresh Kumar
• [PATCH V3 Resend 00/12] clk: Add non CONFIG_HAVE_CLK routines   Viresh Kumar
• [PATCH V3 Resend 01/12] clk: Add non CONFIG_HAVE_CLK routines   Viresh Kumar
• [PATCH V3 Resend 02/12] clk: Remove redundant depends on from drivers/Kconfig   Viresh Kumar
• [PATCH V3 Resend 03/12] i2c/i2c-pxa: Remove conditional compilation of clk code   Viresh Kumar
• [PATCH V3 Resend 04/12] usb/marvell: Remove conditional compilation of clk code   Viresh Kumar
• [PATCH V3 Resend 05/12] usb/musb: Remove conditional compilation of clk code   Viresh Kumar
• [PATCH V3 Resend 06/12] ata/pata_arasan: Remove conditional compilation of clk code   Viresh Kumar
• [PATCH V3 Resend 07/12] ata/sata_mv: Remove conditional compilation of clk code   Viresh Kumar
• [PATCH V3 Resend 08/12] net/c_can: Remove conditional compilation of clk code   Viresh Kumar
• [PATCH V3 Resend 09/12] net/stmmac: Remove conditional compilation of clk code   Viresh Kumar
• [PATCH V3 Resend 10/12] gadget/m66592: Remove conditional compilation of clk code   Viresh Kumar
• [PATCH V3 Resend 11/12] gadget/r8a66597: Remove conditional compilation of clk code   Viresh Kumar
• [PATCH V3 Resend 12/12] usb/host/r8a66597: Remove conditional compilation of clk code   Viresh Kumar
• [GIT PULL] SPEAr clk updates for v-3.5   Viresh Kumar
• [GIT PULL] SPEAr13xx support updates for v-3.5   Viresh Kumar
• [GIT PULL] SPEAr SMI updates for v-3.5   Viresh Kumar
• [GIT PULL] SPEAr pinctrl updates for v-3.5   Viresh Kumar
• [GIT PULL] SPEAr clk updates for v-3.5   Viresh Kumar
• [GIT PULL] SPEAr clk updates for v-3.5   Viresh Kumar
• [PATCH] ARM: SPEAr600: Fix timer interrupt definition in spear600.dtsi   Viresh Kumar
• [PATCH] clk: SPEAr600: Fix ethernet clock name for DT based probing   Viresh Kumar
• [GIT PULL] SPEAr pinctrl updates for v-3.5   Viresh Kumar
• [GIT PULL] SPEAr pinctrl updates for v-3.5   Viresh Kumar
• [PATCH] gpiolib: Add of_get_gpio_chip_by_phandle() helper   Viresh Kumar
• [PATCH] gpiolib: Add of_get_gpio_chip_by_phandle() helper   Viresh Kumar
• [PATCH] iommu/exynos: Add iommu driver for Exynos Platforms   KyongHo
• mm: fix faulty initialization in vmalloc_init()   KyongHo
• [PATCH RESEND] Documentation: devicetree: Fix value format description   Rob Landley
• [PATCH RESEND] Documentation: devicetree: Fix value format description   Rob Landley
• Wrong location of omap_writel?   David Lanzendörfer
• [PATCH] video: EXYNOS: enable interrupt again after sw reset   Donghwa Lee
• [PATCH] video: EXYNOS: changes mipi dsi regulator name from vdd10 to vdd11   Donghwa Lee
• [PATCH 1/5] video: exynos mipi dsi: enable interrupt again after sw reset   Donghwa Lee
• [PATCH 2/5] video: exynos mipi dsi: Do not use deprecated suspend/resume callbacks   Donghwa Lee
• [PATCH 3/5] video: exynos mipi dsi: Avoid races in probe()   Donghwa Lee
• [PATCH 4/5] video: exynos mipi dsi: Properly interpret the interrupt source flags   Donghwa Lee
• [PATCH 5/5] video: exynos mipi dsi: support reverse panel type   Donghwa Lee
• [PATCH 0/5] video: exynos mipi dsi: fixes some bugs and clean the codes   Donghwa Lee
• [PATCH V2] dmaengine/amba-pl08x: check slave_channels to avoid kernel panic   Kassey Lee
• [PATCH 01/17] ARM: provide a late_initcall hook for platform initialization   Rob Lee
• [PATCH v2 3/3] ARM: imx: Add imx6q cpuidle driver   Rob Lee
• [PATCH v2 1/3] ARM: imx: Add common imx cpuidle init functionality.   Rob Lee
• [PATCH v2 1/3] ARM: imx: Add common imx cpuidle init functionality.   Rob Lee
• [PATCH v2 1/3] ARM: imx: Add common imx cpuidle init functionality.   Rob Lee
• [PATCH v2 2/3] ARM: imx: Add imx5 cpuidle driver   Rob Lee
• [PATCH v3 2/3] ARM: imx: Add imx5 cpuidle driver   Rob Lee
• [PATCH] ARM: imx: Modify IMX_IO_P2V macro   Rob Lee
• [PATCH v3 2/3] ARM: imx: Add imx5 cpuidle driver   Rob Lee
• [PATCH] ARM: imx: Modify IMX_IO_P2V macro   Rob Lee
• [PATCH v4 3/7] ARM: imx: clean and consolidate imx5 suspend and idle code   Rob Lee
• [PATCH v4 4/7] ARM: imx: Enable imx53 low power idle   Rob Lee
• [PATCH v4 5/7] ARM: imx: Add common imx cpuidle init functionality.   Rob Lee
• [PATCH v2 0/3] Add imx cpuidle   Robert Lee
• [PATCH v2 1/3] ARM: imx: Add common imx cpuidle init functionality.   Robert Lee
• [PATCH v2 2/3] ARM: imx: Add imx5 cpuidle driver   Robert Lee
• [PATCH v2 3/3] ARM: imx: Add imx6q cpuidle driver   Robert Lee
• [PATCH v3 0/3] Add imx cpuidle   Robert Lee
• [PATCH v3 1/3] ARM: imx: Add common imx cpuidle init functionality.   Robert Lee
• [PATCH v3 2/3] ARM: imx: Add imx5 cpuidle driver   Robert Lee
• [PATCH v3 3/3] ARM: imx: Add imx6q cpuidle driver   Robert Lee
• [PATCH] ARM: imx: Modify IMX_IO_P2V macro   Robert Lee
• [PATCH v4 0/7] cleanup imx5 idle, add imx5/6 cpuidle   Robert Lee
• [PATCH v4 1/7] ARM: imx: Modify IMX_IO_P2V macro   Robert Lee
• [PATCH v4 2/7] ARM: imx: Add comments to tzic_enable_waker()   Robert Lee
• [PATCH v4 3/7] ARM: imx: clean and consolidate imx5 suspend and idle code   Robert Lee
• [PATCH v4 4/7] ARM: imx: Enable imx53 low power idle   Robert Lee
• [PATCH v4 5/7] ARM: imx: Add common imx cpuidle init functionality.   Robert Lee
• [PATCH v4 6/7] ARM: imx: Add imx5 cpuidle   Robert Lee
• [PATCH v4 7/7] ARM: imx: Add imx6q cpuidle driver   Robert Lee
• [PATCH v5 0/7] cleanup imx5 idle, add imx5/6 cpuidle   Robert Lee
• [PATCH v5 1/7] ARM: imx: Modify IMX_IO_P2V macro   Robert Lee
• [PATCH v5 2/7] ARM: imx: Add comments to tzic_enable_waker()   Robert Lee
• [PATCH v5 3/7] ARM: imx: clean and consolidate imx5 suspend and idle code   Robert Lee
• [PATCH v5 4/7] ARM: imx: Enable imx53 low power idle   Robert Lee
• [PATCH v5 5/7] ARM: imx: Add common imx cpuidle init functionality.   Robert Lee
• [PATCH v5 6/7] ARM: imx: Add imx5 cpuidle   Robert Lee
• [PATCH v5 7/7] ARM: imx: Add imx6q cpuidle driver   Robert Lee
• [PATCH] ARM: EXYNOS: PD: Fix duplicate variable   Sangwook Lee
• oprofile and ARM A9 hardware counter   Ming Lei
• oprofile and ARM A9 hardware counter   Ming Lei
• [PATCH] ARM: OMAP2+: fix gpmc request_irq   Ming Lei
• [PATCH] ARM: OMAP2+: fix gpmc request_irq   Ming Lei
• [PATCH] ARM: OMAP2+: fix gpmc request_irq   Ming Lei
• [PATCH] ARM: OMAP2+: fix gpmc request_irq   Ming Lei
• [PATCH 1/1] ARM: kirkwood: Add support for RaidSonic   Jamie Lentin
• [PATCH 1/1] ARM: kirkwood: Add support for RaidSonic   Jamie Lentin
• [PATCH] gpio: Add simple poweroff-gpio driver   Jamie Lentin
• [PATCH] gpio: Add simple poweroff-gpio driver   Jamie Lentin
• kirkwood, nand, clocks and device-tree   Jamie Lentin
• [PATCH] ARM: kirkwood: Force nand platform device name   Jamie Lentin
• [PATCH 00/18][V3] ARM: OMAP3/4 : cpuidle34xx and cpuidle44xx cleanups   Daniel Lezcano
• [PATCH 00/18][V3] ARM: OMAP3/4 : cpuidle34xx and cpuidle44xx cleanups   Daniel Lezcano
• [PATCH 11/18][V3] ARM: OMAP3: cpuidle - remove the 'valid' field   Daniel Lezcano
• [PATCH 18/18][V3] ARM: OMAP3: cpuidle - set global variables static   Daniel Lezcano
• [PATCH 17/18][V3] ARM: OMAP3/4: consolidate cpuidle Makefile   Daniel Lezcano
• [PATCH 0/2] ARM: OMAP3/4: cpuidle - misc fixes   Daniel Lezcano
• [PATCH 1/2] ARM: OMAP3: cpuidle - check the powerdomain lookup   Daniel Lezcano
• [PATCH 2/2] ARM: OMAP3/4: consolidate cpuidle Makefile   Daniel Lezcano
• [PATCH 2/2] ARM: OMAP3/4: consolidate cpuidle Makefile   Daniel Lezcano
• [PATCH 2/2] ARM: OMAP3/4: consolidate cpuidle Makefile   Daniel Lezcano
• [PATCH] ARM: exynos: Adapt to cpuidle core time keeping and irq enable   Daniel Lezcano
• [PATCH 0/2] ARM: S3C64xx: cpuidle cleanups   Daniel Lezcano
• [PATCH 1/2] ARM: s3c64xx: cpuidle - declare the states with the new api   Daniel Lezcano
• [PATCH 2/2] ARM: s3c64xx: cpuidle - use timekeeping wrapper   Daniel Lezcano
• [PATCH] ARM: OMAP3/4: consolidate cpuidle Makefile   Daniel Lezcano
• [PATCH 0/2] ARM: S3C64xx: cpuidle cleanups   Daniel Lezcano
• [PATCH 0/2] ARM: S3C64xx: cpuidle cleanups   Daniel Lezcano
• [PATCH 0/2] ARM: S3C64xx: cpuidle cleanups   Daniel Lezcano
• [PATCH 0/2] ARM: S3C64xx: cpuidle cleanups   Daniel Lezcano
• [PATCH 0/2] ARM: S3C64xx: cpuidle cleanups   Daniel Lezcano
• [PATCH 1/2] ARM: s3c64xx: cpuidle - declare the states with the new api   Daniel Lezcano
• [PATCH 2/2] ARM: s3c64xx: cpuidle - use timekeeping wrapper   Daniel Lezcano
• [PATCH] ARM: OMAP3/4: consolidate cpuidle Makefile   Daniel Lezcano
• [PATCH] ARM: OMAP3/4: consolidate cpuidle Makefile   Daniel Lezcano
• [PATCH 3/7] mmc: dw_mmc: add device tree support   Guennadi Liakhovetski
• [GIT PULL] Urgent fixes (for v3.4 if possible) for Renesas ARM-based platforms   Guennadi Liakhovetski
• [GIT PULL] Urgent fixes (for v3.4 if possible) for Renesas ARM-based platforms   Guennadi Liakhovetski
• [GIT PULL] Urgent fixes (for v3.4 if possible) for Renesas ARM-based platforms   Guennadi Liakhovetski
• [PATCH 3/7] mmc: dw_mmc: add device tree support   Guennadi Liakhovetski
• [PATCH v2] mmc: dt: Consolidate DT bindings   Guennadi Liakhovetski
• CSR SiRFSoC PRIMA2: SPI compilation broken in 3.4-rc7   Guennadi Liakhovetski
• CSR SiRFSoC PRIMA2: SPI compilation broken in 3.4-rc7   Guennadi Liakhovetski
• [PATCH] mmc: mxs-mmc: Add wp-inverted property   Guennadi Liakhovetski
• [PATCH v2 3/9] ARM: mmp: support DT in irq   Grant Likely
• [PATCH v2 5/9] gpio: pxa: parse gpio from DTS file   Grant Likely
• [PATCH RESEND v8] gpio: Device tree support for LPC32xx   Grant Likely
• [PATCH v2] ARM: DT: Add binding for GIC virtualization extentions (VGIC)   Grant Likely
• [PATCH v2] ARM: DT: Add binding for GIC virtualization extentions (VGIC)   Grant Likely
• [PATCH v2] ARM: DT: Add binding for GIC virtualization extentions (VGIC)   Grant Likely
• [PATCH RESEND v8] gpio: Device tree support for LPC32xx   Grant Likely
• [PATCH v2] gpio/omap: fix incorrect initialization of omap_gpio_mod_init   Grant Likely
• [PATCH v2] gpio/omap: fix incorrect initialization of omap_gpio_mod_init   Grant Likely
• [PATCH] gpio: samsung: refactor gpiolib init for exynos4/5   Grant Likely
• [PATCH 4/7] drivers/gpio: gpio-nomadik: Provide documentation for Device Tree bindings   Grant Likely
• [PATCH 4/7] drivers/gpio: gpio-nomadik: Provide documentation for Device Tree bindings   Grant Likely
• irq_to_gpio support   Grant Likely
• [GIT PULL] gpio/omap: cleanups for v3.5   Grant Likely
• [PATCH 06/20] ARM: EXYNOS: add GPC4 bank instance   Grant Likely
• [PATCH 15/20] ARM: Exynos: Add irq_domain support for gpio wakeup interrupts   Grant Likely
• [PATCH 17/20] ARM: Exynos: Add device tree support for gpio wakeup interrupt controller   Grant Likely
• [PATCH 03/03] ARM: Undelete KZM9D mach-type   Grant Likely
• [PATCH 10/20] of/irq: fix interrupt parent lookup procedure   Grant Likely
• [PATCH 10/20] of/irq: fix interrupt parent lookup procedure   Grant Likely
• [PATCH RESEND v9 1/2] gpio: Adjust of_xlate API to support multiple GPIO chips   Grant Likely
• [PATCH] gpio/generic: initialize the shadow of direction register   Grant Likely
• [PATCH 7/7] MMC: mmci: Add required documentation for Device Tree bindings   Grant Likely
• [PATCH 3/7] drivers/gpio: gpio-nomadik: Apply Device Tree bindings   Grant Likely
• [PATCH 02/16] drivers/gpio: gpio-nomadik: Add support for irqdomains   Grant Likely
• [PATCH 8/8] gpio/omap: fix missing check in *_runtime_suspend()   Grant Likely
• [PATCH 02/15] drivers/gpio: gpio-nomadik: Add support for irqdomains   Grant Likely
• [PATCH 0/9] ux500/Nomadik GPIO and pins update   Grant Likely
• [PATCH] gpiolib: Add of_get_gpio_chip_by_phandle() helper   Grant Likely
• [PATCH] gpiolib: Add of_get_gpio_chip_by_phandle() helper   Grant Likely
• [GIT PULL] gpio/omap: fix fallout from last cleanup series   Grant Likely
• [PATCH 0/4] Add device tree support for gpio-mxs   Grant Likely
• [PATCH 1/2] gpio/generic: initialize basic_mmio_gpio shadow variables properly   Grant Likely
• [PATCH 1/2] gpio/generic: initialize basic_mmio_gpio shadow variables properly   Grant Likely
• [PATCH v4] plat-versatile: modernize FPGA IRQ controller   Grant Likely
• [PATCH 19/20] ARM: Exynos5: Add combiner, wakeup interrupt controller and ethernet nodes   Grant Likely
• [PATCH v3 1/7] ARM: davinci, intc: Add OF support for TI interrupt controller   Grant Likely
• [PATCH 2/8] arm: mach-armada: add source files   Grant Likely
• [PATCH v2] gpio/generic: initialize basic_mmio_gpio shadow variables properly   Grant Likely
• [PATCH RESEND] Documentation: devicetree: Fix value format description   Grant Likely
• [PATCH RESEND 5/5] spi/imx: adopt pinctrl support   Grant Likely
• [PATCH 01/10] spi: s3c64xx: remove unused S3C64XX_SPI_ST_TRLCNTZ macro   Grant Likely
• [PATCH 02/10] spi: s3c64xx: move controller information into driver data   Grant Likely
• [PATCH 05/10] ARM: Samsung: Update the device names for spi clock lookup   Grant Likely
• [PATCH 07/10] spi: s3c64xx: Remove the 'set_level' callback from controller data   Grant Likely
• [PATCH v2 0/6] spi: s3c64xx: add support for device tree   Grant Likely
• [PATCH v2 1/6] spi: s3c64xx: remove unused S3C64XX_SPI_ST_TRLCNTZ macro   Grant Likely
• [PATCH v2 2/6] spi: s3c64xx: move controller information into driver data   Grant Likely
• [PATCH v2 5/6] spi: s3c64xx: Remove the 'set_level' callback from controller data   Grant Likely
• [PATCH v2 6/6] spi: s3c64xx: add device tree support   Grant Likely
• [PATCH] SPI: PRIMA2: use the newest APIs of PINCTRL to fix compiling errors   Grant Likely
• [PATCH v2] gpio/generic: initialize basic_mmio_gpio shadow variables properly   Grant Likely
• [PATCH v4 1/6] gpio: fix a typo of comment message   Grant Likely
• [PATCH v4 2/6] gpio: re-add of_node_to_gpiochip function   Grant Likely
• [PATCH v4 3/6] of: release node fix for of_parse_phandle_with_args   Grant Likely
• [PATCH v4 4/6] gpio: introduce lock mechanism for gpiochip_find   Grant Likely
• [PATCH v4 6/6] pinctrl: add pinctrl gpio binding support   Grant Likely
• [PATCH] PINCTRL: SiRF: add CSR SiRFprimaII GPIO driver depending on pinmux APIs   Grant Likely
• [PATCH 3/3] gpio: exynos4: skip gpiolib registration if pinctrl driver is used   Grant Likely
• [PATCH v3 1/7] ARM: davinci, intc: Add OF support for TI interrupt controller   Grant Likely
• [PATCH v4 1/7] ARM: davinci, intc: Add irq domain support   Grant Likely
• [PATCH v4 5/7] ARM: davinci: i2c: add OF support   Grant Likely
• [PATCH v4 4/6] gpio: introduce lock mechanism for gpiochip_find   Grant Likely
• [PATCH v4 6/6] pinctrl: add pinctrl gpio binding support   Grant Likely
• [PATCH v4 6/6] pinctrl: add pinctrl gpio binding support   Grant Likely
• Why DMA PL330 peripheral transfer does not support burst request?   Lee Booi Lim
• Why DMA PL330 peripheral transfer does not support burst request?   Lee Booi Lim
• Why DMA PL330 peripheral transfer does not support burst request?   Lee Booi Lim
• Why DMA PL330 peripheral transfer does not support burst request?   Lee Booi Lim
• Why DMA PL330 peripheral transfer does not support burst request?   Lee Booi Lim
• [PATCH] ARM: mach-pxa: Use REGULATOR_SUPPLY macro   Axel Lin
• [PATCH 2/7] ARM: OMAP2+: Clean up wrapping multiple objects in Makefile   Tony Lindgren
• [PATCH] pinctrl: Add generic pinctrl-simple driver that supports omap2+ padconf   Tony Lindgren
• [PATCH] pinctrl: Add generic pinctrl-simple driver that supports omap2+ padconf   Tony Lindgren
• [PATCH-V5 2/3] arm:omap:am33xx: Add AM335XEVM machine support   Tony Lindgren
• [PATCH-V5 2/3] arm:omap:am33xx: Add AM335XEVM machine support   Tony Lindgren
• [PATCH] pinctrl: Add generic pinctrl-simple driver that supports omap2+ padconf   Tony Lindgren
• [PATCH] pinctrl: Add generic pinctrl-simple driver that supports omap2+ padconf   Tony Lindgren
• [PATCH] omap: dma: Clear status registers on enable/disable irq.   Tony Lindgren
• [PATCH 3.4-rc4] ARM: OMAP1: Amstrad Delta: Fix wrong IRQ base in FIQ handler   Tony Lindgren
• [PATCH 1/2] OMAP2+: UART: Fix incorrect population of default uart pads   Tony Lindgren
• [PATCH v2] arm: omap: fix trivial warnings for dspbridge   Tony Lindgren
• [PATCH-V6 1/3] ARM: OMAP1: FIX: check possible error condition in timer_init   Tony Lindgren
• [PATCH] ARM: OMAP2+: dma: Define dma capabilities register bitfields and use them.   Tony Lindgren
• [PATCH] arm: omap: add minimal support for Nokia RM-696   Tony Lindgren
• [PATCH] omap3_beagle: init uart2 for beagle rev AX/BX only   Tony Lindgren
• [PATCH-V4 4/4] ARM: OMAP3+: am33xx: Add powerdomain & PRM support   Tony Lindgren
• [PATCH 01/19] ARM: OMAP4: PM: save/restore all DPLL settings in OFF mode   Tony Lindgren
• [PATCH 4/7] ARM: OMAP2: Add MMC hwmod data for 2420   Tony Lindgren
• [PATCH-V5 2/3] arm:omap:am33xx: Add AM335XEVM machine support   Tony Lindgren
• [PATCH-V5 2/3] arm:omap:am33xx: Add AM335XEVM machine support   Tony Lindgren
• [PATCH] pinctrl: Add generic pinctrl-simple driver that supports omap2+ padconf   Tony Lindgren
• [PATCH] pinctrl: Add generic pinctrl-simple driver that supports omap2+ padconf   Tony Lindgren
• [PATCH 02/13] ARM: OMAP5: Add minimal support for OMAP5430 SOC   Tony Lindgren
• [PATCH 02/13] ARM: OMAP5: Add minimal support for OMAP5430 SOC   Tony Lindgren
• [PATCH 07/13] ARM: OMAP5: l3: Add l3 error handler support for omap5.   Tony Lindgren
• [PATCH 08/13] ARM: OMAP5: Add the WakeupGen IP updates.   Tony Lindgren
• [PATCH 12/13] ARM: OMAP5: Add the build support   Tony Lindgren
• [PATCH 00/15] arch/arm/mach-* late_initcall cleanup   Tony Lindgren
• [PATCH] ARM: move read_{boot,persistent}_clock to the architecture level   Tony Lindgren
• [PATCH-V5 2/3] arm:omap:am33xx: Add AM335XEVM machine support   Tony Lindgren
• [PATCH 02/13] ARM: OMAP5: Add minimal support for OMAP5430 SOC   Tony Lindgren
• [PATCH 07/13] ARM: OMAP5: l3: Add l3 error handler support for omap5.   Tony Lindgren
• [PATCH 10/13] ARM: OMAP5: board-generic: Add device tree support.   Tony Lindgren
• [PATCH 12/13] ARM: OMAP5: Add the build support   Tony Lindgren
• [PATCH] omap3_beagle: init uart2 for beagle rev AX/BX only   Tony Lindgren
• [PATCH 1/2] OMAP2+: UART: Fix incorrect population of default uart pads   Tony Lindgren
• [PATCH 0/9] omap randconfig fixes for v3.3   Tony Lindgren
• [PATCH 02/13] ARM: OMAP5: Add minimal support for OMAP5430 SOC   Tony Lindgren
• [PATCH 02/13] ARM: OMAP5: Add minimal support for OMAP5430 SOC   Tony Lindgren
• [GIT PULL] ARM: OMAP: PM: CPUidle cleanup for v3.5   Tony Lindgren
• [PATCH 3.4-rc4] ARM: OMAP1: Amstrad Delta: Fix wrong IRQ base in FIQ handler   Tony Lindgren
• [PATCH 00/13] ARM: OMAP5: Add minimal OMAP5 SOC support   Tony Lindgren
• [GIT PULL] omap fixes for v3.4-rc6   Tony Lindgren
• [GIT PULL 2/5] omap hwmod cleanup for v3.5 merge window   Tony Lindgren
• [GIT PULL 1/5] omap sparse cleanup for v3.5 merge window   Tony Lindgren
• [GIT PULL 3/5] omap cpuidle cleanup for v3.5 merge window   Tony Lindgren
• [GIT PULL 4/5] omap pm regulator changes for v3.5 merge window   Tony Lindgren
• [GIT PULL 5/5] omap hwmod changes for v3.5 merge window   Tony Lindgren
• [PATCH 0/7] ARM: OMAP2+: Misc cleanup   Tony Lindgren
• [PATCH 02/13] ARM: OMAP5: Add minimal support for OMAP5430 SOC   Tony Lindgren
• [PATCH 02/13] ARM: OMAP5: Add minimal support for OMAP5430 SOC   Tony Lindgren
• [PATCH 12/13] ARM: OMAP5: Add the build support   Tony Lindgren
• [PATCH 00/13] ARM: OMAP5: Add minimal OMAP5 SOC support   Tony Lindgren
• [PATCH 3/4] ARM: OMAP2+: CLEANUP: Remove unnecessary ifdef around __omap2_set_globals   Tony Lindgren
• [RFC PATCH 4/4] ARM: OMAP2+: CLEANUP: Add new config option for different DPLL features   Tony Lindgren
• [RFC PATCH 4/4] ARM: OMAP2+: CLEANUP: Add new config option for different DPLL features   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: Misc cleanup   Tony Lindgren
• [PATCH-V5 2/3] arm:omap:am33xx: Add AM335XEVM machine support   Tony Lindgren
• [PATCH 02/13] ARM: OMAP5: Add minimal support for OMAP5430 SOC   Tony Lindgren
• [PATCH] ARM: OMAP2+: am33xx: Make am33xx as a separate class   Tony Lindgren
• Broken UART I/O wakeups on v3.4-rc4+   Tony Lindgren
• [PATCH 0/2] ARM: OMAP3: cleanup AM35xx SoC detection   Tony Lindgren
• [PATCH v2] ARM: OMAP: WiLink platform data for the PandaBoard   Tony Lindgren
• [PATCH] ARM: OMAP2+: am33xx: Make am33xx as a separate class   Tony Lindgren
• [PATCH] ARM: OMAP3: cm-t35: add support for power off   Tony Lindgren
• [PATCH 2/2] ARM: OMAP: AM35xx: convert 3517 detection/flags to AM35xx   Tony Lindgren
• [PATCH 0/2] ARM: OMAP3: cleanup AM35xx SoC detection   Tony Lindgren
• [PATCH 1/2] input: keypad: move platform_data to <linux/platform_data>   Tony Lindgren
• [RESEND PATCH 1/2] ARM: OMAP2+: nand: Make board_onenand_init() visible to board code   Tony Lindgren
• [PATCH] ARM: OMAP2+: craneboard: register emac device   Tony Lindgren
• [PATCH v3] arm: omap4: hsmmc: check for null pointer   Tony Lindgren
• [PATCH 2/2] OMAP4: devices: Do not create mcpdm device if the dtb has been provided   Tony Lindgren
• [PATCH 1/3] OMAP4: twl-common: Add twl6030 V1V8, V2V1 SMPS common configuration   Tony Lindgren
• [PATCH v2] GPMC: add ECC control definitions   Tony Lindgren
• [GIT PULL] omap fixes for v3.4-rc6   Tony Lindgren
• [GIT PULL] omap fixes for v3.4-rc6, take2   Tony Lindgren
• [PATCH] ARM: OMAP: Cleanup Beagleboard DVI reset gpio   Tony Lindgren
• [PATCH 02/13] ARM: OMAP5: Add minimal support for OMAP5430 SOC   Tony Lindgren
• [PATCH] ARM: OMAP: Cleanup Beagleboard DVI reset gpio   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: some hwmod data additions for 3.5   Tony Lindgren
• [PATCH v2 0/3] ARM: OMAP4: register V1V8, V2V1 regulators   Tony Lindgren
• [PATCH]: arm/dts: OMAP4: Add Variscite OMAP4 System-On-Modeule support   Tony Lindgren
• [PATCH-V7 0/3] ARM: OMAP: Make OMAP clocksource source selection runtime   Tony Lindgren
• [PATCH] ARM: OMAP2+: remove incorrect irq_chip ack field   Tony Lindgren
• [PATCH 3/3] ARM: OMAP2+: Kconfig: convert SOC_OMAPAM33XX to SOC_AM33XX   Tony Lindgren
• [PATCH-V2] ARM: OMAP2+: am33xx: Make am33xx as a separate class   Tony Lindgren
• [PATCH] pinctrl: Add generic pinctrl-simple driver that supports omap2+ padconf   Tony Lindgren
• [PATCH] pinctrl: Add generic pinctrl-simple driver that supports omap2+ padconf   Tony Lindgren
• [PATCH] pinctrl: Add generic pinctrl-simple driver that supports omap2+ padconf   Tony Lindgren
• [PATCH 0/3] ARM: OMAP: OMAP4 DTS updates   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: Misc cleanup   Tony Lindgren
• [PATCH] pinctrl: Add generic pinctrl-simple driver that supports omap2+ padconf   Tony Lindgren
• [PATCH-V2] ARM: OMAP2+: am33xx: Make am33xx as a separate class   Tony Lindgren
• [PATCH-V2] ARM: OMAP2+: am33xx: Make am33xx as a separate class   Tony Lindgren
• [PATCH-V2] ARM: OMAP2+: am33xx: Make am33xx as a separate class   Tony Lindgren
• [GIT PULL 3/10] more omap soc clean-up for v3.5 merge window   Tony Lindgren
• [GIT PULL 2/10] omap soc clean-up for v3.5 merge window   Tony Lindgren
• [GIT PULL 1/10] omap non-critical fixes for v3.5 merge window   Tony Lindgren
• [GIT PULL 4/10] updates for omap PRCM (Power, Reset, Clock Management)   Tony Lindgren
• [GIT PULL 6/10] omap hwmod data additions for v3.5, depends on devel-prcm   Tony Lindgren
• [GIT PULL 7/10] omap device init clean-up for v3.5   Tony Lindgren
• [GIT PULL 5/10] omap board file changes for v3.5 merge window   Tony Lindgren
• [GIT PULL 9/10] omap devicetree updates for v3.5 merge window   Tony Lindgren
• [GIT PULL 8/10] omap timer cleanup for v3.5 merge window   Tony Lindgren
• [GIT PULL 10/10] omap dss clean up for v3.5 merge window   Tony Lindgren
• [GIT PULL 9/10] omap devicetree updates for v3.5 merge window   Tony Lindgren
• [GIT PULL 8/10] omap timer cleanup for v3.5 merge window   Tony Lindgren
• [GIT PULL 10/10] omap dss clean up for v3.5 merge window   Tony Lindgren
• [GIT PULL 2/10] omap soc clean-up for v3.5 merge window   Tony Lindgren
• [PATCH v2] OMAP2+: UART: Add mechanism to probe uart pins and configure rx wakeup   Tony Lindgren
• [GIT PULL 8/10] omap timer cleanup for v3.5 merge window   Tony Lindgren
• [PATCH] ARM: OMAP2+: irq: Increase no of supported interrupts to 128   Tony Lindgren
• [PATCH-V7 0/3] ARM: OMAP: Make OMAP clocksource source selection runtime   Tony Lindgren
• [GIT PULL 1/10] omap non-critical fixes for v3.5 merge window   Tony Lindgren
• [GIT PULL 1/10] omap non-critical fixes for v3.5 merge window   Tony Lindgren
• [PATCH] ARM: OMAP1: USB: fix ocpi_enable compile problem on non-1610 builds   Tony Lindgren
• [PATCH] ARM: OMAP: OTG integration: fix compiler warning   Tony Lindgren
• [GIT PULL] few omap fixups for v3.5 merge window   Tony Lindgren
• [PATCH] pinctrl: Add generic pinctrl-simple driver that supports omap2+ padconf   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: Add AM335x and AM3517/05 EVM DT support   Tony Lindgren
• [PATCH 00/13] ARM: OMAP5: Add minimal OMAP5 SOC support   Tony Lindgren
• [PATCH] pinctrl: Add generic pinctrl-simple driver that supports omap2+ padconf   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: Add AM335x and AM3517/05 EVM DT support   Tony Lindgren
• [RESEND PATCH 1/2] ARM: OMAP2+: nand: Make board_onenand_init() visible to board code   Tony Lindgren
• [PATCH] pinctrl: Add generic pinctrl-simple driver that supports omap2+ padconf   Tony Lindgren
• [RESEND PATCH 1/2] ARM: OMAP2+: nand: Make board_onenand_init() visible to board code   Tony Lindgren
• [PATCH 8/8] gpio/omap: fix missing check in *_runtime_suspend()   Tony Lindgren
• [GIT PULL] misc omap fixes for 3.5   Tony Lindgren
• [PATCH 8/8] gpio/omap: fix missing check in *_runtime_suspend()   Tony Lindgren
• [PATCH 0/4] omap legacy full speed usb cleanup for v3.6   Tony Lindgren
• [PATCH 1/4] ARM: OMAP3: There is no FS USB controller on omap3   Tony Lindgren
• [PATCH 2/4] ARM: OMAP2: Remove legacy USB FS support   Tony Lindgren
• [PATCH 3/4] ARM: OMAP: Make FS USB omap1 only   Tony Lindgren
• [PATCH 4/4] USB: Remove omap2 support from omap_udc.c   Tony Lindgren
• [PATCH 4/4] USB: Remove omap2 support from omap_udc.c   Tony Lindgren
• [PATCH 3/4] ARM: OMAP: Make FS USB omap1 only   Tony Lindgren
• [PATCH 0/4] omap legacy full speed usb cleanup for v3.6   Tony Lindgren
• [PATCH] mmc: omap: Fix a section warning regression   Tony Lindgren
• [PATCH] mmc: omap: Fix NULL pointer dereference if mmc_omap_new_slot() fails   Tony Lindgren
• Wrong location of omap_writel?   Tony Lindgren
• Regression for non-eMMC cards with commit fa550189?   Tony Lindgren
• Regression for non-eMMC cards with commit fa550189?   Tony Lindgren
• Regression for non-eMMC cards with commit fa550189?   Tony Lindgren
• [PATCH] mmc: omap: Fix broken reg_shift initialization   Tony Lindgren
• [GIT PULL] ARM: SPEAr13xx support for 3.5   Russell King - ARM Linux
• [GIT PULL] ARM: SPEAr13xx support for 3.5   Russell King - ARM Linux
• [PATCH] ARM: Fix restoration of IP scratch register when auditing syscalls   Russell King - ARM Linux
• [PATCH 2/2] I2C: Implement DMA support into mxs-i2c   Russell King - ARM Linux
• [PATCH 1/7] mmc: dw_mmc: lookup for optional biu and ciu clocks   Russell King - ARM Linux
• [PATCH V3 1/8] CLKDEV: Add helper routines to allocate and add clkdevs for given struct clk *   Russell King - ARM Linux
• [PATCH 2/7] ARM: OMAP2+: Clean up wrapping multiple objects in Makefile   Russell King - ARM Linux
• [PATCH] clk: Use a separate struct for holding init data.   Russell King - ARM Linux
• [PATCH V3 1/8] CLKDEV: Add helper routines to allocate and add clkdevs for given struct clk *   Russell King - ARM Linux
• Cyclic DMA - callback properties and tx_status residue   Russell King - ARM Linux
• Cyclic DMA - callback properties and tx_status residue   Russell King - ARM Linux
• [PATCH V3 2/8] clk: add a fixed factor clock   Russell King - ARM Linux
• [PATCH] ARM: Fix restoration of IP scratch register when auditing syscalls   Russell King - ARM Linux
• [PATCH] gpio: Add simple poweroff-gpio driver   Russell King - ARM Linux
• Making ARM multiplatform kernels DT-only?   Russell King - ARM Linux
• Making ARM multiplatform kernels DT-only?   Russell King - ARM Linux
• [PATCH 01/15] ARM: provide a late_initcall hook for platform initialization   Russell King - ARM Linux
• [PATCH 6.2/7] MMC: mmci: Enable Device Tree support for ux500   Russell King - ARM Linux
• [PATCH 6.2/7] MMC: mmci: Enable Device Tree support for ux500   Russell King - ARM Linux
• [PATCH 6.2/7] MMC: mmci: Enable Device Tree support for ux500   Russell King - ARM Linux
• [PATCH] ARM: Enable I$/D$/BrPredict based on config   Russell King - ARM Linux
• [PATCH] ARM: Enable I$/D$/BrPredict based on config   Russell King - ARM Linux
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Russell King - ARM Linux
• Making ARM multiplatform kernels DT-only?   Russell King - ARM Linux
• Making ARM multiplatform kernels DT-only?   Russell King - ARM Linux
• common clock framework   Russell King - ARM Linux
• [RFC] Remove support for ARMv3 ARM610 and ARM710 CPUs   Russell King - ARM Linux
• Cyclic DMA - callback properties and tx_status residue   Russell King - ARM Linux
• Making ARM multiplatform kernels DT-only?   Russell King - ARM Linux
• [RFC] Remove support for ARMv3 ARM610 and ARM710 CPUs   Russell King - ARM Linux
• [RFC] Remove support for ARMv3 ARM610 and ARM710 CPUs   Russell King - ARM Linux
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Russell King - ARM Linux
• [RFC] Remove support for ARMv3 ARM610 and ARM710 CPUs   Russell King - ARM Linux
• Making ARM multiplatform kernels DT-only?   Russell King - ARM Linux
• Making ARM multiplatform kernels DT-only?   Russell King - ARM Linux
• Handling of modular boards   Russell King - ARM Linux
• Handling of modular boards   Russell King - ARM Linux
• [PATCH] ARM: move read_{boot, persistent}_clock to the architecture level   Russell King - ARM Linux
• [PATCH] ARM: SMP: prevent use of the console when using idmap_pgd   Russell King - ARM Linux
• [PATCH] ARM: move read_{boot, persistent}_clock to the architecture level   Russell King - ARM Linux
• [PATCH] ARM: SMP: prevent use of the console when using idmap_pgd   Russell King - ARM Linux
• mv_cesa dcache problem since 2.6.37 was: Re: mv_cesa hash functions   Russell King - ARM Linux
• [PATCH 2/9] serial: amba-pl011: adopt pinctrl support   Russell King - ARM Linux
• [PATCH 2/2] remove the debugging restrictions in devicemaps_init()   Russell King - ARM Linux
• [PATCHv5 1/3] ARM: tegra: Add Tegra AHB driver   Russell King - ARM Linux
• [PATCH 1/2] mfd: max8925: request resource region   Russell King - ARM Linux
• [PATCH 1/2] mfd: max8925: request resource region   Russell King - ARM Linux
• [PATCH 1/2] mfd: max8925: request resource region   Russell King - ARM Linux
• [PATCH 1/2] mfd: max8925: request resource region   Russell King - ARM Linux
• How to check if a patch is applied, ejected or ignored?   Russell King - ARM Linux
• [PATCH 2/2] remove the debugging restrictions in devicemaps_init()   Russell King - ARM Linux
• [PATCH] ARM: decompressor: Fix mmu mapping for non-DRAM address space.   Russell King - ARM Linux
• [PATCH] Prevent process migration during vfp_init()   Russell King - ARM Linux
• Cyclic DMA - callback properties and tx_status residue   Russell King - ARM Linux
• Cyclic DMA - callback properties and tx_status residue   Russell King - ARM Linux
• [PATCH] ARM: decompressor: Fix mmu mapping for non-DRAM address space.   Russell King - ARM Linux
• [PATCH] ARM: decompressor: Fix mmu mapping for non-DRAM address space.   Russell King - ARM Linux
• [PATCH 1/2] mfd: max8925: request resource region   Russell King - ARM Linux
• [PATCH 1/2] mfd: max8925: request resource region   Russell King - ARM Linux
• [PATCH 1/2] mfd: max8925: request resource region   Russell King - ARM Linux
• [PATCH] ARM: decompressor: Fix mmu mapping for non-DRAM address space.   Russell King - ARM Linux
• [PATCH 00/19] ARM: OMAP4 device off support   Russell King - ARM Linux
• Cyclic DMA - callback properties and tx_status residue   Russell King - ARM Linux
• [PATCH] ARM: decompressor: Fix mmu mapping for non-DRAM address space.   Russell King - ARM Linux
• [GIT PULL] SPEAr clk updates for v-3.5   Russell King - ARM Linux
• [PATCH 11/15] drivers/mfd: Enable Device Tree for ab8500-core driver   Russell King - ARM Linux
• Making ARM multiplatform kernels DT-only?   Russell King - ARM Linux
• [PATCH 1/7] mmc: dw_mmc: lookup for optional biu and ciu clocks   Russell King - ARM Linux
• [GIT PULL] SPEAr clk updates for v-3.5   Russell King - ARM Linux
• Cyclic DMA - callback properties and tx_status residue   Russell King - ARM Linux
• Cyclic DMA - callback properties and tx_status residue   Russell King - ARM Linux
• Cyclic DMA - callback properties and tx_status residue   Russell King - ARM Linux
• Cyclic DMA - callback properties and tx_status residue   Russell King - ARM Linux
• [PATCH] ARM: integrator: fix typo in PCI swizzle function   Russell King - ARM Linux
• [PATCH 2/2] remove the debugging restrictions in devicemaps_init()   Russell King - ARM Linux
• [PATCH] ARM: integrator: fix typo in PCI swizzle function   Russell King - ARM Linux
• [PATCH] ARM: EXYNOS: PD: Fix duplicate variable   Russell King - ARM Linux
• [PATCH] Removal of last remaining useless system.h includes   Russell King - ARM Linux
• [PATCH 03/03] ARM: Undelete KZM9D mach-type   Russell King - ARM Linux
• L1 & L2 cache flush sequence on CortexA5 MPcore w.r.t low power modes   Russell King - ARM Linux
• L1 & L2 cache flush sequence on CortexA5 MPcore w.r.t low power modes   Russell King - ARM Linux
• Cyclic DMA - callback properties and tx_status residue   Russell King - ARM Linux
• [RFC 00/12] OMAP DMA engine conversion   Russell King - ARM Linux
• [RFC 00/12] OMAP DMA engine conversion   Russell King - ARM Linux
• L1 & L2 cache flush sequence on CortexA5 MPcore w.r.t low power modes   Russell King - ARM Linux
• L1 & L2 cache flush sequence on CortexA5 MPcore w.r.t low power modes   Russell King - ARM Linux
• [PATCH] serial: samsung: Fixed wrong comparison for baudclk_rate   Russell King - ARM Linux
• [PATCH V2] dmaengine/amba-pl08x: check slave_channels to avoid kernel panic   Russell King - ARM Linux
• [PATCH] serial: samsung: Fixed wrong comparison for baudclk_rate   Russell King - ARM Linux
• [PATCH] ARM: LPAE: fix access flag setup in mem_type_table   Russell King - ARM Linux
• [PATCH] ARM: LPAE: fix access flag setup in mem_type_table   Russell King - ARM Linux
• [PATCH v2] serial: samsung: Fixed wrong comparison for baudclk_rate   Russell King - ARM Linux
• [PATCH v1 4/7] usb: chipidea: add imx driver binding   Russell King - ARM Linux
• [PATCH] MTD: LPC32xx MLC NAND driver   Russell King - ARM Linux
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Russell King - ARM Linux
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Russell King - ARM Linux
• [PATCH] MTD: LPC32xx MLC NAND driver   Russell King - ARM Linux
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Russell King - ARM Linux
• L1 & L2 cache flush sequence on CortexA5 MPcore w.r.t low power modes   Russell King - ARM Linux
• [RFC] pl08x: don't use dma_slave_config direction argument   Russell King - ARM Linux
• [RFC] pl08x: don't use dma_slave_config direction argument   Russell King - ARM Linux
• [RFC] pl08x: don't use dma_slave_config direction argument   Russell King - ARM Linux
• [RFC] pl08x: don't use dma_slave_config direction argument   Russell King - ARM Linux
• [RFC] pl08x: don't use dma_slave_config direction argument   Russell King - ARM Linux
• [PATCH] ARM: mv78xx0: Fix compiler error in pcie.c   Russell King - ARM Linux
• [RFC] pl08x: don't use dma_slave_config direction argument   Russell King - ARM Linux
• [RFC] pl08x: don't use dma_slave_config direction argument   Russell King - ARM Linux
• [PATCH v7 3/3] MTD: atmel_nand: Update driver to support Programmable Multibit ECC controller   Russell King - ARM Linux
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Russell King - ARM Linux
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Russell King - ARM Linux
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Russell King - ARM Linux
• [RFC] pl08x: don't use dma_slave_config direction argument   Russell King - ARM Linux
• [RFC] pl08x: don't use dma_slave_config direction argument   Russell King - ARM Linux
• [PATCH v2 3/6] mmc: dw_mmc: lookup for optional biu and ciu clocks   Russell King - ARM Linux
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Russell King - ARM Linux
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Russell King - ARM Linux
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Russell King - ARM Linux
• [PATCH 2/2] ARM: SMP: use per cpu state to replace   Russell King - ARM Linux
• [PATCH 1/8] ARM: PCI: remove unused sys->hw   Russell King - ARM Linux
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Russell King - ARM Linux
• [PATCH v2 06/17] ARM: dma-mapping: fix for speculative accesses   Russell King - ARM Linux
• [PATCH] Fix OMAP4 boot regression   Russell King - ARM Linux
• [PATCH] [ARM] Unconditional call to smp_cross_call on UP crashes   Russell King - ARM Linux
• [PATCH] [ARM] Unconditional call to smp_cross_call on UP crashes   Russell King - ARM Linux
• [PATCH 2/4] ASoC: mmp: add audio dma support   Russell King - ARM Linux
• [alsa-devel] [PATCH 2/4] ASoC: mmp: add audio dma support   Russell King - ARM Linux
• [PATCH 13/20] arm: Do not call try_to_freeze() in do_signal()   Russell King - ARM Linux
• [PATCH 01/20] arm: Do not call do_signal() with irqs disabled   Russell King - ARM Linux
• [PATCH 2/6] amba: use the new linux/sizes.h   Russell King - ARM Linux
• [PATCH 6/6] serial: add amba-pl011-pci   Russell King - ARM Linux
• [PATCH 6/6] serial: add amba-pl011-pci   Russell King - ARM Linux
• arm: Remaining issue with alignment of __log_buf in printk.c   Russell King - ARM Linux
• [PATCH V2 0/1] dmaengine/amba-pl08x: Add support for s3c64xx DMAC   Russell King - ARM Linux
• amba, tegra-ahb and pci (Kconfig question)   Russell King - ARM Linux
• [PATCH] serial/of-serial: Add 16654 chip to compatible string list   Russell King - ARM Linux
• amba, tegra-ahb and pci (Kconfig question)   Russell King - ARM Linux
• [PATCH] serial/of-serial: Add 16654 chip to compatible string list   Russell King - ARM Linux
• [PATCH] serial/of-serial: Add 16654 chip to compatible string list   Russell King - ARM Linux
• [PATCH] serial/of-serial: Add 16654 chip to compatible string list   Russell King - ARM Linux
• [PATCH] serial/of-serial: Add 16654 chip to compatible string list   Russell King - ARM Linux
• [alsa-devel] [PATCH 2/4] ASoC: mmp: add audio dma support   Russell King - ARM Linux
• [alsa-devel] [PATCH 2/4] ASoC: mmp: add audio dma support   Russell King - ARM Linux
• [PATCH V2 0/1] dmaengine/amba-pl08x: Add support for s3c64xx DMAC   Russell King - ARM Linux
• [PATCH 1/2] Allow constructor name selection by architecture.   Russell King - ARM Linux
• [alsa-devel] [PATCH 2/4] ASoC: mmp: add audio dma support   Russell King - ARM Linux
• [RFC 00/34] PL08x DMA conversion to virt-dma   Russell King - ARM Linux
• [PATCH v2] mtd mxc_nand: use 32bit copy functions   Russell King - ARM Linux
• [GIT PULL] CMA and ARM DMA-mapping updates for v3.5   Russell King - ARM Linux
• [alsa-devel] [PATCH 2/4] ASoC: mmp: add audio dma support   Russell King - ARM Linux
• [RFC 03/34] dmaengine: virt-dma: add support for cyclic DMA periodic callbacks   Russell King - ARM Linux
• [RFC 03/34] dmaengine: virt-dma: add support for cyclic DMA periodic callbacks   Russell King - ARM Linux
• About CPU hotplug stress test failed   Jason Liu
• [PATCH 0/2] OMAP: mailbox initial device tree support   Omar Ramirez Luna
• [PATCH 1/2] OMAP: mailbox: add device tree support   Omar Ramirez Luna
• [PATCH 2/2] arm/dts: OMAP2+: Add mailbox nodes   Omar Ramirez Luna
• [PATCH 0/3] OMAP: control: bootaddr and bootmod APIs   Omar Ramirez Luna
• [PATCH 1/3] OMAP2+: control: new APIs to configure boot address and mode   Omar Ramirez Luna
• [PATCH 2/3] OMAP: dsp: interface to control module functions   Omar Ramirez Luna
• [PATCH 3/3] staging: tidspbridge: use scm functions to set boot address and mode   Omar Ramirez Luna
• [PATCH 0/2] OMAP: mailbox initial device tree support   Omar Ramirez Luna
• [PATCH 0/3] OMAP: control: bootaddr and bootmod APIs   Omar Ramirez Luna
• [PATCH 0/2] OMAP: mailbox initial device tree support   Omar Ramirez Luna
• [PATCH 0/2] OMAP: mailbox initial device tree support   Omar Ramirez Luna
• [PATCH] maintainership update for the Marvell Orion family of SOCs   Andrew Lunn
• [PATCH] clk: Use a separate struct for holding init data.   Andrew Lunn
• [PATCH] clk: Use a separate struct for holding init data.   Andrew Lunn
• [PATCH 1/1] ARM: kirkwood: Add support for RaidSonic   Andrew Lunn
• [PATCH] clk: Use a separate struct for holding init data.   Andrew Lunn
• [PATCH] gpio: Add simple poweroff-gpio driver   Andrew Lunn
• [PATCH] gpio: Add simple poweroff-gpio driver   Andrew Lunn
• [PATCH] gpio: Add simple poweroff-gpio driver   Andrew Lunn
• [PATCH 1/1] ARM: kirkwood: Add support for RaidSonic   Andrew Lunn
• [PATCH 0/5] more clk-next fixes   Andrew Lunn
• [PATCH 2/8] arm: mach-armada: add source files   Andrew Lunn
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Andrew Lunn
• [PATCH 2/8] arm: mach-armada: add source files   Andrew Lunn
• [PATCH 2/8] arm: mach-armada: add source files   Andrew Lunn
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Andrew Lunn
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Andrew Lunn
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Andrew Lunn
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Andrew Lunn
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Andrew Lunn
• [PATCH] [SPI] Refactor spi-orion to use SPI framework queue.   Andrew Lunn
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Andrew Lunn
• [PATCH] ARM: mv78xx0: Fix compiler error in pcie.c   Andrew Lunn
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Andrew Lunn
• kirkwood, nand, clocks and device-tree   Andrew Lunn
• kirkwood, nand, clocks and device-tree   Andrew Lunn
• kirkwood, nand, clocks and device-tree   Andrew Lunn
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Andrew Lunn
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Andrew Lunn
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Andrew Lunn
• kirkwood, nand, clocks and device-tree   Andrew Lunn
• [PATCH] arm: omap: add minimal support for Nokia RM-696   Pavel Machek
• Compile err with raumfeld_defconfig   Daniel Mack
• [PATCH RESEND 0/4] ARM: EXYNOS: Add s3c-hsotg support for Exynos4210 and S5PV210 boards   Lukasz Majewski
• [PATCH RESEND 1/4] ARM: EXYNOS: Add usb otg phy control for EXYNOS4210   Lukasz Majewski
• [PATCH RESEND 2/4] ARM: EXYNOS: Add s3c-hsotg device support for GONI board   Lukasz Majewski
• [PATCH RESEND 3/4] ARM: EXYNOS: Add s3c-hsotg device support for NURI board   Lukasz Majewski
• [PATCH RESEND 4/4] ARM: EXYNOS: Add s3c-hsotg device support for Universal C210 board   Lukasz Majewski
• [PATCH 1/2] ARM: EXYNOS: cosmetic: Rename exynos4 to exynos4210 in USB phy code   Lukasz Majewski
• [PATCH 2/2] ARM: EXYNOS: Remove superfluous udelay   Lukasz Majewski
• [PATCH] lib/decompress_unxz.c: removing all memory helper functions   Thavatchai Makphaibulcboke
• [PATCH] lib/decompress_unxz.c: removing all memory helper functions   Thavatchai Makphaibulcboke
• [PATCH] lib/decompress_unxz.c: removing all memory helper functions   Thavatchai Makphaibulcboke
• [PATCH] lib/decompress_unxz.c: removing all memory helper functions   T Makphaibulchoke
• Request for inclusion of ep93xx tree in linux-next   Ryan Mallon
• [GIT PULL] ep93xx cleanups for 3.5   Ryan Mallon
• [GIT PULL] ep93xx fixes for 3.5   Ryan Mallon
• [GIT PULL] ep93xx cleanups for 3.5   Ryan Mallon
• usb, davinci: usb 2.0 problem on an am1808 based board   Manjunathappa, Prakash
• usb, davinci: usb 2.0 problem on an am1808 based board   Manjunathappa, Prakash
• usb, davinci: usb 2.0 problem on an am1808 based board   Manjunathappa, Prakash
• [PATCH v4] ARM: cache-l2x0.c: save aux ctrl for resume in case l2x0 is enabled before init   Yilu Mao
• [PATCH v5] ARM: cache-l2x0.c: save the final aux ctrl value for resuming   Yilu Mao
• [PATCH v5] ARM: cache-l2x0.c: save the final aux ctrl value for resuming   Yilu Mao
• [PATCH v4] ARM: cache-l2x0.c: save aux ctrl for resume in case l2x0 is enabled before init   Catalin Marinas
• [PATCH v5] ARM: cache-l2x0.c: save the final aux ctrl value for resuming   Catalin Marinas
• [PATCH] ARM: decompressor: Fix mmu mapping for non-DRAM address space.   Catalin Marinas
• [PATCH] ARM: decompressor: Fix mmu mapping for non-DRAM address space.   Catalin Marinas
• [PATCH] ARM: decompressor: Fix mmu mapping for non-DRAM address space.   Catalin Marinas
• [PATCH] ARM: decompressor: Fix mmu mapping for non-DRAM address space.   Catalin Marinas
• [RFC/PATCH 1/1] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Catalin Marinas
• [RFC/PATCH 1/1] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Catalin Marinas
• Query about: ARM11 MPCore: preemption/task migration cache coherency   Catalin Marinas
• Query about: ARM11 MPCore: preemption/task migration cache coherency   Catalin Marinas
• Query about: ARM11 MPCore: preemption/task migration cache coherency   Catalin Marinas
• Query about: ARM11 MPCore: preemption/task migration cache coherency   Catalin Marinas
• Query about: ARM11 MPCore: preemption/task migration cache coherency   Catalin Marinas
• Query about: ARM11 MPCore: preemption/task migration cache coherency   Catalin Marinas
• Query about: ARM11 MPCore: preemption/task migration cache coherency   Catalin Marinas
• Query about: ARM11 MPCore: preemption/task migration cache coherency   Catalin Marinas
• Query about: ARM11 MPCore: preemption/task migration cache coherency   Catalin Marinas
• [ehci-mxc] USB stopped working in i.MX27 based Visstrim_M10 board.   javier Martin
• [PATCH] Visstrim M10: fix gpio handling.   Javier Martin
• [PATCH] ARM: Fix restoration of IP scratch register when auditing syscalls   Jon Masters
• [PATCH] ARM: Fix restoration of IP scratch register when auditing syscalls   Jon Masters
• [PATCH] ARM: Fix restoration of IP scratch register when auditing syscalls   Jon Masters
• [PATCH] ARM: Fix restoration of IP scratch register when auditing syscalls   Jon Masters
• [PATCH] ARM: Fix restoration of IP scratch register when auditing syscalls   Jon Masters
• [PATCH] ARM: Fix restoration of IP scratch register when auditing syscalls   Jon Masters
• [PATCH v2] omap: dma: Clear status registers on enable/disable irq.   Oleg Matcovschi
• ARM Versatile defconfig PCI io out of range?   Richard Maw
• ARM Versatile defconfig PCI io out of range?   Richard Maw
• ARM: iMX: lockup with irqs disabled in drivers/tty/imx.c   Michael McTernan
• [PATCH 01/19] ARM: OMAP4: PM: save/restore all DPLL settings in OFF mode   Menon, Nishanth
• [PATCH 3/3] ARM: OMAP2+ PM: Add support for TPS62361   Nishanth Menon
• [PATCH 3/3] ARM: OMAP2+ PM: Add support for TPS62361   Menon, Nishanth
• [PATCH] ARM: OMAP2+: OPP: Fix to ensure check of right oppdef after bad one   Nishanth Menon
• [PATCH] ARM: OMAP: PM: Lock clocks list while generating summary   Nishanth Menon
• [PATCH] ARM: OMAP3+: PM: VP: ensure VP is idle before disable   Nishanth Menon
• [PATCH V2] ARM: OMAP3+: PM: VP: ensure VP is idle before disable   Nishanth Menon
• [PATCH 0/3] ARM: OMAP3+: VP: collate fixes   Nishanth Menon
• [PATCH 1/3] ARM: OMAP3+: PM: VP: ensure VP is idle before disable   Nishanth Menon
• [PATCH 2/3] ARM: OMAP3+: PM: VP: check to ensure VP is idle before forceupdate   Nishanth Menon
• [PATCH 3/3] ARM: OMAP3+: PM: VP: check only the VPINIDLE status bit   Nishanth Menon
• [PATCH] ARM: OMAP3+: dpll: optimize noncore dpll locking logic   Nishanth Menon
• [PATCH V2] ARM: OMAP3+: PM: VP: ensure VP is idle before disable   Menon, Nishanth
• [PATCH V2] ARM: OMAP3+: PM: VP: ensure VP is idle before disable   Menon, Nishanth
• [PATCH V3 1/3] ARM: OMAP3+: PM: VP: ensure VP is idle before disable   Nishanth Menon
• [linux-pm] [PATCH V3 00/10] PM: Create the AVS(Adaptive Voltage Scaling)   Menon, Nishanth
• [PATCH] ARM: OMAP3+: dpll: optimize noncore dpll locking logic   Menon, Nishanth
• [PATCH] ARM: OMAP3+: dpll: optimize noncore dpll locking logic   Menon, Nishanth
• [PATCHv5 5/8] ARM: OMAP: hwmod: Add support for per hwmod/module context lost count   Menon, Nishanth
• [PATCHv2 04/19] ARM: OMAP4: PM: save/restore all DPLL settings in OFF mode   Menon, Nishanth
• [PATCHv2 09/19] ARM: OMAP4: PM: add errata support   Menon, Nishanth
• [PATCHv2 14/19] ARM: OMAP4: wakeupgen: enable clocks for save_secure_all   Menon, Nishanth
• [PATCHv2 09/19] ARM: OMAP4: PM: add errata support   Menon, Nishanth
• [PATCHv2 17/19] ARM: OMAP4: put cpu1 back to sleep if no wake request   Menon, Nishanth
• [PATCHv2 04/19] ARM: OMAP4: PM: save/restore all DPLL settings in OFF mode   Menon, Nishanth
• [PATCHv2 19/19] ARM: OMAP4: powerdomain: update mpu / core off counters during device off   Menon, Nishanth
• [PATCH 1/3] ARM: OMAP3+: PM: VP: ensure VP is idle before disable   Nishanth Menon
• [PATCH 2/3] ARM: OMAP3+: PM: VP: check to ensure VP is idle before forceupdate   Nishanth Menon
• [PATCH 3/3] ARM: OMAP3+: PM: VP: check only the VPINIDLE status bit   Nishanth Menon
• [PATCH V4 0/4] ARM: OMAP3+: VP: collate fixes   Nishanth Menon
• [PATCH V2 1/4] ARM: OMAP3+: PM: VP: check only the VPINIDLE status bit   Nishanth Menon
• [PATCH V2 2/4] ARM: OMAP3+: PM: VP: move check of idle to separate function   Nishanth Menon
• [PATCH V2 3/4] ARM: OMAP3+: PM: VP: check to ensure VP is idle before forceupdate   Nishanth Menon
• [PATCH V2 4/4] ARM: OMAP3+: PM: VP: ensure VP is idle before disable   Nishanth Menon
• [PATCH 2/5] net: fec: adopt pinctrl API   David Miller
• [PATCH V3 Resend 08/12] net/c_can: Remove conditional compilation of clk code   David Miller
• [PATCH V3 Resend 09/12] net/stmmac: Remove conditional compilation of clk code   David Miller
• [PATCH RESEND 2/5] net: fec: adopt pinctrl support   David Miller
• [PATCH V3] CS89x0 : Use ioread16/iowrite16 on all platforms   David Miller
• [PATCH 19/22] net/smsc911x: Repair broken failure paths   David Miller
• [PATCH 00/39] OMAP GPMC driver conversion   Afzal Mohammed
• [PATCH 01/39] ARM: OMAP2+: gpmc: driver conversion   Afzal Mohammed
• [PATCH 02/39] ARM: OMAP2+: gpmc: Adapt to HWMOD   Afzal Mohammed
• [PATCH 03/39] ARM: OMAP2+: gpmc: register details for nand driver   Afzal Mohammed
• [PATCH 04/39] ARM: OMAP2+: gpmc: Acquire NAND CS value   Afzal Mohammed
• [PATCH 05/39] ARM: OMAP2+: nand: create platform data structure   Afzal Mohammed
• [PATCH 06/39] ARM: OMAP2+: onenand: return value in init function   Afzal Mohammed
• [PATCH 07/39] ARM: OMAP2+: gpmc-nand: Adapt to use gpmc driver   Afzal Mohammed
• [PATCH 08/39] ARM: OMAP2+: gpmc-onenand: Adapt to use gpmc driver   Afzal Mohammed
• [PATCH 09/39] ARM: OMAP2+: flash: Adapt to gpmc driver   Afzal Mohammed
• [PATCH 10/39] ARM: OMAP2+: gpmc-smsc911x: Adapt to use gpmc driver   Afzal Mohammed
• [PATCH 11/39] ARM: OMAP2+: gpmc-smc91x: Adapt to use gpmc driver   Afzal Mohammed
• [PATCH 12/39] ARM: OMAP2+: gpmc-tusb6010: Adapt to gpmc driver   Afzal Mohammed
• [PATCH 13/39] ARM: OMAP3: hwmod data: add gpmc   Afzal Mohammed
• [PATCH 14/39] ARM: OMAP2xxx: hwmod data: add gpmc   Afzal Mohammed
• [PATCH 15/39] mtd: nand: omap2: obtain memory from resource   Afzal Mohammed
• [PATCH 16/39] mtd: nand: omap2: use gpmc provided irqs   Afzal Mohammed
• [PATCH 17/39] mtd: nand: omap2: handle nand on gpmc   Afzal Mohammed
• [PATCH 18/39] mtd: onenand: omap: obtain memory from resource   Afzal Mohammed
• [PATCH 19/39] ARM: OMAP2+: board omap3evm: gpmc driver adaptation   Afzal Mohammed
• [PATCH 20/39] ARM: OMAP2+: board omap3beagle: gpmc driver adaptation   Afzal Mohammed
• [PATCH 21/39] ARM: OMAP2+: board apollon: gpmc driver adaptation   Afzal Mohammed
• [PATCH 22/39] ARM: OMAP2+: board h4: gpmc driver adaptation   Afzal Mohammed
• [PATCH 23/39] ARM: OMAP2+: board 3630sdp: gpmc driver adaptation   Afzal Mohammed
• [PATCH 24/39] ARM: OMAP2+: board 3430sdp: gpmc driver adaptation   Afzal Mohammed
• [PATCH 25/39] ARM: OMAP2+: board 2430sdp: gpmc driver adaptation   Afzal Mohammed
• [PATCH 26/39] ARM: OMAP2+: board cm-t3517: gpmc driver adaptation   Afzal Mohammed
• [PATCH 27/39] ARM: OMAP2+: board cm-t35: gpmc driver adaptation   Afzal Mohammed
• [PATCH 28/39] ARM: OMAP2+: board ldp: gpmc driver adaptation   Afzal Mohammed
• [PATCH 29/39] ARM: OMAP2+: board n8x0: gpmc driver adaptation   Afzal Mohammed
• [PATCH 30/39] ARM: OMAP2+: board omap3logic: gpmc driver adaptation   Afzal Mohammed
• [PATCH 31/39] ARM: OMAP2+: board omap3pandora: gpmc driver adaptation   Afzal Mohammed
• [PATCH 32/39] ARM: OMAP2+: board omap3stalker: gpmc driver adaptation   Afzal Mohammed
• [PATCH 33/39] ARM: OMAP2+: board omap4pcm049: gpmc driver adaptation   Afzal Mohammed
• [PATCH 34/39] ARM: OMAP2+: board overo: gpmc driver adaptation   Afzal Mohammed
• [PATCH 35/39] ARM: OMAP2+: board rm680: gpmc driver adaptation   Afzal Mohammed
• [PATCH 36/39] ARM: OMAP2+: board rx51: gpmc driver adaptation   Afzal Mohammed
• [PATCH 37/39] ARM: OMAP2+: board zoom-debugboard: gpmc driver adaptation   Afzal Mohammed
• [PATCH 38/39] OMAP3: igep0020: Add support for Micron NAND Flash storage memory   Afzal Mohammed
• [PATCH 39/39] ARM: OMAP2+: board igep0020: gpmc driver adaptation   Afzal Mohammed
• [PATCH v4 00/39] OMAP GPMC driver conversion   Afzal Mohammed
• [PATCH v4 01/39] ARM: OMAP2+: gpmc: driver conversion   Afzal Mohammed
• [PATCH v4 02/39] ARM: OMAP2+: gpmc: Adapt to HWMOD   Afzal Mohammed
• [PATCH v4 03/39] ARM: OMAP2+: gpmc: register details for nand driver   Afzal Mohammed
• [PATCH v4 04/39] ARM: OMAP2+: gpmc: Acquire NAND CS value   Afzal Mohammed
• [PATCH v4 05/39] ARM: OMAP2+: nand: create platform data structure   Afzal Mohammed
• [PATCH v4 06/39] ARM: OMAP2+: onenand: return value in init function   Afzal Mohammed
• [PATCH v4 07/39] ARM: OMAP2+: gpmc-nand: Adapt to use gpmc driver   Afzal Mohammed
• [PATCH v4 08/39] ARM: OMAP2+: gpmc-onenand: Adapt to use gpmc driver   Afzal Mohammed
• [PATCH v4 09/39] ARM: OMAP2+: flash: Adapt to gpmc driver   Afzal Mohammed
• [PATCH v4 10/39] ARM: OMAP2+: gpmc-smsc911x: Adapt to use gpmc driver   Afzal Mohammed
• [PATCH v4 11/39] ARM: OMAP2+: gpmc-smc91x: Adapt to use gpmc driver   Afzal Mohammed
• [PATCH v4 12/39] ARM: OMAP2+: gpmc-tusb6010: Adapt to gpmc driver   Afzal Mohammed
• [PATCH v4 13/39] ARM: OMAP3: hwmod data: add gpmc   Afzal Mohammed
• [PATCH v4 14/39] ARM: OMAP2xxx: hwmod data: add gpmc   Afzal Mohammed
• [PATCH v4 15/39] mtd: nand: omap2: obtain memory from resource   Afzal Mohammed
• [PATCH v4 16/39] mtd: nand: omap2: use gpmc provided irqs   Afzal Mohammed
• [PATCH v4 17/39] mtd: nand: omap2: handle nand on gpmc   Afzal Mohammed
• [PATCH v4 18/39] mtd: onenand: omap: obtain memory from resource   Afzal Mohammed
• [PATCH v4 19/39] ARM: OMAP2+: board omap3evm: gpmc driver adaptation   Afzal Mohammed
• [PATCH v4 20/39] ARM: OMAP2+: board omap3beagle: gpmc driver adaptation   Afzal Mohammed
• [PATCH v4 21/39] ARM: OMAP2+: board apollon: gpmc driver adaptation   Afzal Mohammed
• [PATCH v4 22/39] ARM: OMAP2+: board h4: gpmc driver adaptation   Afzal Mohammed
• [PATCH v4 23/39] ARM: OMAP2+: board 3630sdp: gpmc driver adaptation   Afzal Mohammed
• [PATCH v4 24/39] ARM: OMAP2+: board 3430sdp: gpmc driver adaptation   Afzal Mohammed
• [PATCH v4 25/39] ARM: OMAP2+: board 2430sdp: gpmc driver adaptation   Afzal Mohammed
• [PATCH v4 26/39] ARM: OMAP2+: board cm-t3517: gpmc driver adaptation   Afzal Mohammed
• [PATCH v4 27/39] ARM: OMAP2+: board cm-t35: gpmc driver adaptation   Afzal Mohammed
• [PATCH v4 28/39] ARM: OMAP2+: board ldp: gpmc driver adaptation   Afzal Mohammed
• [PATCH v4 29/39] ARM: OMAP2+: board n8x0: gpmc driver adaptation   Afzal Mohammed
• [PATCH v4 30/39] ARM: OMAP2+: board omap3logic: gpmc driver adaptation   Afzal Mohammed
• [PATCH v4 31/39] ARM: OMAP2+: board omap3pandora: gpmc driver adaptation   Afzal Mohammed
• [PATCH v4 32/39] ARM: OMAP2+: board omap3stalker: gpmc driver adaptation   Afzal Mohammed
• [PATCH v4 33/39] ARM: OMAP2+: board omap4pcm049: gpmc driver adaptation   Afzal Mohammed
• [PATCH v4 34/39] ARM: OMAP2+: board overo: gpmc driver adaptation   Afzal Mohammed
• [PATCH v4 35/39] ARM: OMAP2+: board rm680: gpmc driver adaptation   Afzal Mohammed
• [PATCH v4 36/39] ARM: OMAP2+: board rx51: gpmc driver adaptation   Afzal Mohammed
• [PATCH v4 37/39] ARM: OMAP2+: board zoom-debugboard: gpmc driver adaptation   Afzal Mohammed
• [PATCH v4 38/39] OMAP3: igep0020: Add support for Micron NAND Flash storage memory   Afzal Mohammed
• [PATCH v4 39/39] ARM: OMAP2+: board igep0020: gpmc driver adaptation   Afzal Mohammed
• [PATCH v4 01/39] ARM: OMAP2+: gpmc: driver conversion   Mohammed, Afzal
• [PATCH v4 02/39] ARM: OMAP2+: gpmc: Adapt to HWMOD   Mohammed, Afzal
• [PATCH v4 04/39] ARM: OMAP2+: gpmc: Acquire NAND CS value   Mohammed, Afzal
• [PATCH v4 06/39] ARM: OMAP2+: onenand: return value in init function   Mohammed, Afzal
• [PATCH v4 01/39] ARM: OMAP2+: gpmc: driver conversion   Mohammed, Afzal
• [PATCH v4 01/39] ARM: OMAP2+: gpmc: driver conversion   Mohammed, Afzal
• [PATCH v4 02/39] ARM: OMAP2+: gpmc: Adapt to HWMOD   Mohammed, Afzal
• [PATCH v4 01/39] ARM: OMAP2+: gpmc: driver conversion   Mohammed, Afzal
• [PATCH v4 02/39] ARM: OMAP2+: gpmc: Adapt to HWMOD   Mohammed, Afzal
• [PATCH v4 01/39] ARM: OMAP2+: gpmc: driver conversion   Mohammed, Afzal
• [PATCH v4 00/39] OMAP GPMC driver conversion   Mohammed, Afzal
• [PATCH] ARM: OMAP2/3: hwmod data: add gpmc   Afzal Mohammed
• [PATCH v4 01/39] ARM: OMAP2+: gpmc: driver conversion   Mohammed, Afzal
• [PATCH v4 02/39] ARM: OMAP2+: gpmc: Adapt to HWMOD   Mohammed, Afzal
• [PATCH] ARM: OMAP2+: fix gpmc request_irq   Mohammed, Afzal
• [PATCH] ARM: OMAP2+: fix gpmc request_irq   Mohammed, Afzal
• [GIT PULL] Veratile Express DT updates for v3.5   Pawel Moll
• [GIT PULL] Veratile Express DT updates for v3.5   Pawel Moll
• [PATCH v9 00/19] Introduce a led trigger for CPU activity and consolidate LED driver in ARM   Andrew Morton
• [PATCH v3 0/6] thermal: exynos: Add kernel thermal support for exynos platform   Andrew Morton
• [PATCH v3 2/6] thermal: Add generic cpufreq cooling implementation   Andrew Morton
• [PATCH v3 3/6] hwmon: exynos4: Move thermal sensor driver to driver/thermal directory   Andrew Morton
• [PATCH v3 5/6] thermal: exynos: Register the tmu sensor with the kernel thermal layer   Andrew Morton
• [PATCH v3 6/6] ARM: exynos: Add thermal sensor driver platform data support   Andrew Morton
• [PATCH v9 00/19] Introduce a led trigger for CPU activity and consolidate LED driver in ARM   Andrew Morton
• [PATCH v9 00/19] Introduce a led trigger for CPU activity and consolidate LED driver in ARM   Andrew Morton
• [PATCH V3 Resend 07/12] ata/sata_mv: Remove conditional compilation of clk code   Andrew Morton
• mm: fix faulty initialization in vmalloc_init()   Andrew Morton
• [PATCHv2 3/4] mm: vmalloc: add VM_DMA flag to indicate areas used by dma-mapping framework   KOSAKI Motohiro
• [PATCHv2 4/4] ARM: dma-mapping: remove custom consistent dma region   KOSAKI Motohiro
• [PATCHv2 4/4] ARM: dma-mapping: remove custom consistent dma region   KOSAKI Motohiro
• [PATCH 01/08] mach-shmobile: Emma Mobile EV2 SoC base support V3   Paul Mundt
• Clock register in early init   Paul Mundt
• [PATCHv2 3/4] mm: vmalloc: add VM_DMA flag to indicate areas used by dma-mapping framework   Paul Mundt
• [PATCH] Drop superfluous setting of i2c_board_info.type   Paul Mundt
• L1 & L2 cache flush sequence on CortexA5 MPcore w.r.t low power modes   Murali N
• L1 & L2 cache flush sequence on CortexA5 MPcore w.r.t low power modes   Murali N
• L1 & L2 cache flush sequence on CortexA5 MPcore w.r.t low power modes   Murali N
• [PATCH] ARM: EXYNOS: Add platform resource definitions for FIMC-LITE   Sylwester Nawrocki
• [PATCH] ARM: EXYNOS: Add platform resource definitions for FIMC-LITE   Sylwester Nawrocki
• [PATCH] ARM: EXYNOS: Add platform resource definitions for FIMC-LITE   Sylwester Nawrocki
• [PATCH 2/2] regulator: Add support for MAX77686.   Sylwester Nawrocki
• [PATCH] ARM: EXYNOS: Add platform resource definitions for FIMC-LITE   Sylwester Nawrocki
• [PATCHv2 0/3] Add support for DRM display subsystem   Sylwester Nawrocki
• [PATCH 1/2] ARM: EXYYNOS: Use EXYNOS4210_GPEx instead of EXYNOS4_GPEx   Sylwester Nawrocki
• [PATCH 2/2] gpio/exynos: Add support for Exynos4x12 SoC   Sylwester Nawrocki
• [PATCH 1/2] ARM: EXYYNOS: Use EXYNOS4210_GPEx instead of EXYNOS4_GPEx   Sylwester Nawrocki
• [PATCHv4 6/8] ARM: OMAP4: PM: support ret_logic/mem_off_counters   Rajendra Nayak
• [PATCHv4 6/8] ARM: OMAP4: PM: support ret_logic/mem_off_counters   Rajendra Nayak
• [PATCH] ARM: OMAP3/4: consolidate cpuidle Makefile   Rajendra Nayak
• [PATCH] clk: Constify struct clk_init_data   Rajendra Nayak
• [PATCHv4 4/8] ARM: OMAP4: hwmod: flag hwmods/modules supporting module level context status   Rajendra Nayak
• [PATCHv4 4/8] ARM: OMAP4: hwmod: flag hwmods/modules supporting module level context status   Rajendra Nayak
• [PATCH 0/2] clk: Add support for more default divider types   Rajendra Nayak
• [PATCH 1/2] clk: Add support for power of two type dividers   Rajendra Nayak
• [PATCH 2/2] clk: Add support for rate table based dividers   Rajendra Nayak
• [PATCH] ARM: omap: clock: Get rid of unwanted clkdm assocations within clks   Rajendra Nayak
• [PATCH 2/2] clk: Add support for rate table based dividers   Rajendra Nayak
• [PATCH 1/2] clk: Add support for power of two type dividers   Rajendra Nayak
• [PATCH 2/2] clk: Add support for rate table based dividers   Rajendra Nayak
• [RFC PATCH] clk: add extension API   Rajendra Nayak
• [PATCH 2/3] IRQ: allow check_wakeup_irqs to notice level-triggered interrupts.   NeilBrown
• [PATCH 2/3] IRQ: allow check_wakeup_irqs to notice level-triggered interrupts.   NeilBrown
• [PATCH] mmc: dw_mmc: make multiple instances of dw_mci_card_workqueue   Will Newton
• [PATCH 2/7] mmc: dw_mmc: add quirk to indicate missing write protect line   Will Newton
• [PATCH 1/7] mmc: dw_mmc: lookup for optional biu and ciu clocks   Will Newton
• [PATCH] ixp4xx: fix compilation by adding gpiolib support   Jonathan Nieder
• [PATCH] ixp4xx: fix compilation by adding gpiolib support   Jonathan Nieder
• [PATCH 1/2] mtd: gpmi: add device tree support to gpmi-nand   Subodh Nijsure
• i.MX USB Re-Structure   Subodh Nijsure
• Issues when running DT enabled kernel on iMX28 from linux-next   Subodh Nijsure
• Issues when running DT enabled kernel on iMX28 from linux-next   Subodh Nijsure
• [PATCH v2 00/12] add imx usb driver for mx28/6x   Subodh Nijsure
• [PATCH] omap: dma: Clear status registers on enable/disable irq.   Jarkko Nikula
• [RFC / PATCH] arm/davinci: optimize the DMA ISR   Nori, Sekhar
• [GIT PULL] DaVinci fixes for v3.5   Nori, Sekhar
• [GIT PULL] DaVinci clean-up for v3.5   Nori, Sekhar
• [PATCH v3 0/7] ARM: davinci: add support for the am1808 based enbw_cmc board   Sekhar Nori
• [PATCH 02/15] ARM: davinci: use machine specific hook for late init   Sekhar Nori
• [GIT PULL v2] DaVinci SoC support updates   Nori, Sekhar
• [GIT PULL v2] DaVinci fixes and cleanups for v3.5   Nori, Sekhar
• [PATCH 0/2] arm: omap3: am35x: Convert emac to hwmod & disable hlt when open   Sekhar Nori
• [PATCH v3 4/7] ARM: davinci: net: davinci_emac: add OF support   Nori, Sekhar
• [PATCH v3 4/7] ARM: davinci: net: davinci_emac: add OF support   Sekhar Nori
• [PATCH v3 1/7] ARM: davinci, intc: Add OF support for TI interrupt controller   Sekhar Nori
• [PATCH] ARM: davinci: turn off DDR PHY when entering deep sleep   Sekhar Nori
• [PATCH] ARM: davinci: turn off DDR PHY when entering deep sleep   Sekhar Nori
• [PATCH 3/3] mtd: nand: kill NAND_NO_AUTOINCR option   Brian Norris
• [PATCH] RFC: ARM: msm: re-read DMA IRQ status on each iteration   Jeff Ohlstein
• mc13xxx: add I2C support, V5   Samuel Ortiz
• [PATCH 1/2] mfd: max8925: request resource region   Samuel Ortiz
• [PATCH 1/2] mfd: max8925: request resource region   Samuel Ortiz
• [PATCH] mfd: da9052: fix of_match_node() arguments   Samuel Ortiz
• [PATCH 09/15] drivers/mfd: Enable Device Tree support for the db8500-prcmu   Samuel Ortiz
• [PATCH 10/15] drivers/mfd: db8500-prcmu: Add support for regulator supply for nmk-i2c.4   Samuel Ortiz
• [PATCH 14/15] mfd/db8500-prcmu: Add Device Tree support and enable ux500 platforms   Samuel Ortiz
• [PATCH 12/15] mfd/db8500-prcmu: Register as a platform driver instead of only probing   Samuel Ortiz
• [PATCH 3/3] twl4030: enable wakeup on twl4030 IRQ.   Samuel Ortiz
• [PATCH 2/2] mfd: twl: remove pdata->irq_base/_end, no more users   Samuel Ortiz
• [PATCH 11/15] drivers/mfd: Enable Device Tree for ab8500-core driver   Samuel Ortiz
• [PATCH V2] mfd: anatop: make register accessor more flexible and rename meaningfully   Samuel Ortiz
• [GIT PULL][for 3.5] pull request of board-specific branch in arch-pxa git tree   Samuel Ortiz
• [PATCH 1/4] mc13xxx: add codec platform data   Samuel Ortiz
• [PATCH 00/18] DT enablement for Snowball   Samuel Ortiz
• [PATCH 11/16] mfd: Enable Device Tree support in the ab8500-sysctrl driver   Samuel Ortiz
• [PATCH 13/16] mfd: Enable Device Tree support in the ab8500-pwm driver   Samuel Ortiz
• [PATCH 2/2] MFD: mc13xxx workaround SPI hardware bug on i.Mx   Samuel Ortiz
• [PATCH 02/17] ARM: at91: use machine specific hook for late init   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] pinctrl: Add generic pinctrl-simple driver that supports omap2+ padconf   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v5] MTD: atmel_nand: Update driver to support Programmable Multibit ECC controller   Jean-Christophe PLAGNIOL-VILLARD
• Making ARM multiplatform kernels DT-only?   Jean-Christophe PLAGNIOL-VILLARD
• Making ARM multiplatform kernels DT-only?   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] pinctrl: Add generic pinctrl-simple driver that supports omap2+ padconf   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] pinctrl: Add generic pinctrl-simple driver that supports omap2+ padconf   Jean-Christophe PLAGNIOL-VILLARD
• [RFC] Remove support for ARMv3 ARM610 and ARM710 CPUs   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] pinctrl: Add generic pinctrl-simple driver that supports omap2+ padconf   Jean-Christophe PLAGNIOL-VILLARD
• Making ARM multiplatform kernels DT-only?   Jean-Christophe PLAGNIOL-VILLARD
• Making ARM multiplatform kernels DT-only?   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] pinctrl: Add generic pinctrl-simple driver that supports omap2+ padconf   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/13] ARM: OMAP5: id: Add cpu id for ES versions   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 1/3] mmc: atmel-mci: add device tree support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 2/3] ARM: at91: add clocks for DT entries   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 3/3] ARM: dts: add nodes for atmel hsmci controllers for atmel platforms   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 1/3] mmc: atmel-mci: add device tree support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v8 1/3] MTD: at91: extract hw ecc initialization to one function   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v8 2/3] MTD: add dt parameters for PMECC   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v8 3/3] MTD: atmel_nand: Update driver to support Programmable Multibit ECC controller   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4 1/3] mmc: atmel-mci: add device tree support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4 2/3] ARM: at91: add clocks for DT entries   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v8 1/3] MTD: at91: extract hw ecc initialization to one function   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v9 0/3] MTD: at91: Add PMECC support for at91 nand flash driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v9 3/3] MTD: at91: atmel_nand: Update driver to support Programmable Multibit ECC controller   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] lib/decompress_unxz.c: removing all memory helper functions   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: at91: aic can use fast eoi handler type   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4 v5] ARM: dts: add nodes for atmel hsmci controllers for atmel SOCs   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/4 v5] ARM: dts: add nodes for atmel hsmci controllers for atmel boards   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4 v5] mmc: atmel-mci: add device tree support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] ARM: at91: add atmel-mci support for chips and boards which can use it   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] ARM: at91: add atmel-mci support for chips and boards which can use it   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v9 3/3] MTD: at91: atmel_nand: Update driver to support Programmable Multibit ECC controller   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: Fix restoration of IP scratch register when auditing syscalls   Eric Paris
• [PATCH 3/7] mmc: dw_mmc: add device tree support   Kyungmin Park
• [PATCH 4/7] mmc: dw_mmc: add samsung exynos5250 specific extentions   Kyungmin Park
• [PATCH 5/7] ARM: Samsung: Add support for MSHC controller clocks   Kyungmin Park
• [PATCHv2 0/3] Add support for DRM display subsystem   Kyungmin Park
• [PATCH 3/7] mmc: dw_mmc: add device tree support   Kyungmin Park
• [PATCHv2 0/3] Add support for DRM display subsystem   Kyungmin Park
• [PATCH v3 0/2] regulator: Add initial suport for max77686   Kyungmin Park
• [PATCH 05/20] ARM: EXYNOS: Redefine IRQ_MCT_L0,1 definition   Kyungmin Park
• [PATCH RESEND] ARM: pxa: hx4700: Initialize DS1WM clock_rate   Paul Parsons
• [PATCH RESEND] ARM: pxa: hx4700: Enable ASIC3 GPIO as a wakeup source   Paul Parsons
• [PATCH RESEND 2/3 v6] ARM: pxa: hx4700: Add PCMCIA/CF support   Paul Parsons
• [PATCH RESEND 1/3 v7] ARM: pxa: hx4700: Add PCMCIA/CF platform device   Paul Parsons
• [PATCH] ARM: mach-pxa: Use REGULATOR_SUPPLY macro   Paul Parsons
• [PATCH 2/2 v7] ARM: pxa: hx4700: Add Synaptics NavPoint touchpad   Paul Parsons
• [GIT PULL][for 3.5] pull request of board-specific branch in arch-pxa git tree   Paul Parsons
• [GIT PULL][for 3.5] pull request of board-specific branch in arch-pxa git tree   Paul Parsons
• [PATCH V2] CS89x0 : Use ioread16/iowrite16 on all platforms   Joe Perches
• [PATCH] kernel: Shrink embedded kernel, remove WARN strings when !CONFIG_PRINTK   Joe Perches
• [PATCH] lib/decompress_unxz.c: removing all memory helper functions   Joe Perches
• [PATCH] lib/decompress_unxz.c: removing all memory helper functions   Joe Perches
• [PATCH] lib/decompress_unxz.c: removing all memory helper functions   Joe Perches
• [PATCH] lib/decompress_unxz.c: removing all memory helper functions   Joe Perches
• [PATCH] gpio: Add simple poweroff-gpio driver   Luka Perkov
• [PATCH 01/11] OMAP2+: Add SoC specific map_io functions   Thomas Petazzoni
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Thomas Petazzoni
• [PATCH 1/8] arm: mach-armada: add headers   Thomas Petazzoni
• [PATCH 2/8] arm: mach-armada: add source files   Thomas Petazzoni
• [PATCH 3/8] arm: mach-armada: add documentation for new device tree bindings   Thomas Petazzoni
• [PATCH 4/8] arm: mach-armada: add compilation/configuration changes   Thomas Petazzoni
• [PATCH 5/8] arm: mach-armada: add support for Armada 370 board with device tree   Thomas Petazzoni
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Thomas Petazzoni
• [PATCH 7/8] arm: mach-armada: add defconfig   Thomas Petazzoni
• [PATCH 8/8] arm: mach-armada: add entry to MAINTAINERS   Thomas Petazzoni
• [PATCH 2/8] arm: mach-armada: add source files   Thomas Petazzoni
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Thomas Petazzoni
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Thomas Petazzoni
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Thomas Petazzoni
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Thomas Petazzoni
• [PATCH 7/8] arm: mach-armada: add defconfig   Thomas Petazzoni
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Thomas Petazzoni
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Thomas Petazzoni
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Thomas Petazzoni
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Thomas Petazzoni
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Thomas Petazzoni
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Thomas Petazzoni
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Thomas Petazzoni
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Thomas Petazzoni
• [RFC PATCH 00/11 V7] MXS: Add i.MX28 USB Host driver   Chen Peter-B29397
• [RFC PATCH 00/11 V7] MXS: Add i.MX28 USB Host driver   Chen Peter-B29397
• [PATCH 1/2] usb: fsl_mxc_udc.c: add workaround for ENGcm09152 for i.MX25   Chen Peter-B29397
• [RFC PATCH 00/11 V7] MXS: Add i.MX28 USB Host driver   Chen Peter-B29397
• [RFC PATCH 00/11 V7] MXS: Add i.MX28 USB Host driver   Chen Peter-B29397
• i.MX USB Re-Structure   Chen Peter-B29397
• [PATCH v2 00/12] add imx usb driver for mx28/6x   Chen Peter-B29397
• [PATCH v2 00/12] add imx usb driver for mx28/6x   Chen Peter-B29397
• [PATCH v2 02/12] usb: chipidea: permit driver bindings pass phy pointer   Chen Peter-B29397
• [PATCH 1/2] ARM: dts: add device tree source for imx6dl   Kim Phillips
• [PATCHv3 0/5] coupled cpuidle state support   Lorenzo Pieralisi
• [PATCHv3 0/5] coupled cpuidle state support   Lorenzo Pieralisi
• L1 & L2 cache flush sequence on CortexA5 MPcore w.r.t low power modes   Lorenzo Pieralisi
• L1 & L2 cache flush sequence on CortexA5 MPcore w.r.t low power modes   Lorenzo Pieralisi
• L1 & L2 cache flush sequence on CortexA5 MPcore w.r.t low power modes   Lorenzo Pieralisi
• L1 & L2 cache flush sequence on CortexA5 MPcore w.r.t low power modes   Lorenzo Pieralisi
• L1 & L2 cache flush sequence on CortexA5 MPcore w.r.t low power modes   Lorenzo Pieralisi
• L1 & L2 cache flush sequence on CortexA5 MPcore w.r.t low power modes   Lorenzo Pieralisi
• [PATCH v7 0/6] PM QoS: implement the OMAP low level constraints management code   Jean Pihet
• [PATCH] arm: omap: Use only valid power domain states   Jean Pihet
• [PATCH] arm: omap: Use only valid power domain states   Jean Pihet
• [PATCH 2/5] ARM: OMAP2+: PM: use the power domains registers cache for the power states   Jean Pihet
• [PATCHv4 8/8] ARM: OMAP4: PM: Added option for enabling OSWR   Jean Pihet
• [PATCH 1/6] ARM: OMAP2+: PM: protect the power domain state change by a mutex   Jean Pihet
• [PATCH 2/6] ARM: OMAP2+: PM: introduce power domains functional states   Jean Pihet
• oprofile and ARM A9 hardware counter   Jean Pihet
• oprofile and ARM A9 hardware counter   Jean Pihet
• [PATCH] arm: omap3: am35x: Set proper powerdomain states   Jean Pihet
• [PATCH 2/6] ARM: OMAP2+: PM: introduce power domains functional states   Jean Pihet
• [PATCHv2 03/19] ARM: OMAP4: PM: Add device-off support   Jean Pihet
• [GIT PULL] omap fixes for v3.4-rc6   Laurent Pinchart
• [PATCH] ARM: Make consistent_base static   Laurent Pinchart
• [PATCH 2/2] remove the debugging restrictions in devicemaps_init()   Nicolas Pitre
• [PATCH 2/2] remove the debugging restrictions in devicemaps_init()   Nicolas Pitre
• [PATCH] mach-shmobile: Emma Mobile EV2 SMP prototype code   Nicolas Pitre
• [PATCH v9 00/19] Introduce a led trigger for CPU activity and consolidate LED driver in ARM   Nicolas Pitre
• [PATCH v9 00/19] Introduce a led trigger for CPU activity and consolidate LED driver in ARM   Nicolas Pitre
• [PATCH 2/2] remove the debugging restrictions in devicemaps_init()   Nicolas Pitre
• [PATCH] Removal of last remaining useless system.h includes   Nicolas Pitre
• [PATCH 01/11] OMAP2+: Add SoC specific map_io functions   Nicolas Pitre
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Nicolas Pitre
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Nicolas Pitre
• [PATCH 1/8] arm: mach-armada: add headers   Nicolas Pitre
• [GIT PULL] ARM: Kirkwood: new boards for v3.5   Nicolas Pitre
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Nicolas Pitre
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Nicolas Pitre
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Nicolas Pitre
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Nicolas Pitre
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Nicolas Pitre
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Nicolas Pitre
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Nicolas Pitre
• [PATCHv5 1/2] drivers: input: keypad: Add device tree support   Sourav Poddar
• [PATCHv5 2/2] arm/dts: omap4-sdp: Add keypad data   Sourav Poddar
• [PATCH] W1: OMAP HDQ1W: allow driver to be built on all OMAP2+   Evgeniy Polyakov
• [PATCH] ARM: at91: add support for Telit EVK GE863-PRO3 Signed-off-by: Fabio Porcedda <fabio.porcedda at gmail.com>   Fabio Porcedda
• [PATCH v2] ARM: at91: add support for Telit EVK GE863-PRO3   Fabio Porcedda
• [PATCH] ARM: backtrace: avoid crash on large invalid fp value   Todd Poynor
• [PATCH v9 00/19] Introduce a led trigger for CPU activity and consolidate LED driver in ARM   Richard Purdie
• [PATCH 01/13] ARM: OMAP5: id: Add cpu id for ES versions   Roger Quadros
• [PATCH 08/13] ARM: OMAP5: Add the WakeupGen IP updates.   Roger Quadros
• [PATCH 08/13] ARM: OMAP5: Add the WakeupGen IP updates.   Roger Quadros
• [PATCH 02/13] ARM: OMAP5: Add minimal support for OMAP5430 SOC   Roger Quadros
• [PATCH 02/13] ARM: OMAP5: Add minimal support for OMAP5430 SOC   R, Sricharan
• [PATCH 07/13] ARM: OMAP5: l3: Add l3 error handler support for omap5.   R, Sricharan
• [PATCH 12/13] ARM: OMAP5: Add the build support   R, Sricharan
• [PATCH 10/13] ARM: OMAP5: board-generic: Add device tree support.   R, Sricharan
• [PATCH 07/13] ARM: OMAP5: l3: Add l3 error handler support for omap5.   R, Sricharan
• [PATCH 02/13] ARM: OMAP5: Add minimal support for OMAP5430 SOC   R, Sricharan
• [PATCH 02/13] ARM: OMAP5: Add minimal support for OMAP5430 SOC   R, Sricharan
• [PATCH 01/13] ARM: OMAP5: id: Add cpu id for ES versions   R, Sricharan
• [PATCH 01/13] ARM: OMAP5: id: Add cpu id for ES versions   R, Sricharan
• [PATCH 0/4] ARM: OMAP2+: Misc cleanup part2   Sricharan R
• [PATCH 00/13] ARM: OMAP5: Add minimal OMAP5 SOC support   Sricharan R
• [PATCH 2/4] ARM: OMAP2+: Move the stubbed prm and cm functions to prcm.c file and make them __weak.   Sricharan R
• [PATCH 1/4] ARM: OMAP2+: Introduce CONFIG_SOC_HAS_OMAP_DPLL macro   R, Sricharan
• [PATCH 1/4] ARM: OMAP2+: Introduce CONFIG_SOC_HAS_OMAP_DPLL macro   R, Sricharan
• [PATCH-V2 3/4] ARM: OMAP2+: CLEANUP: Remove unnecessary ifdef around __omap2_set_globals   Sricharan R
• [PATCH 00/13] ARM: OMAP5: Add minimal OMAP5 SOC support   R, Sricharan
• [PATCH] omap3_beagle: init uart2 for beagle rev AX/BX only   Raja, Govindraj
• Broken UART I/O wakeups on v3.4-rc4+   Raja, Govindraj
• [PATCH 0/8] gpio/omap: remaining cleanups and fix   Raja, Govindraj
• [PATCH v2] OMAP2+: UART: Add mechanism to probe uart pins and configure rx wakeup   Raja, Govindraj
• [PATCH v2] OMAP2+: UART: Add mechanism to probe uart pins and configure rx wakeup   Raja, Govindraj
• MMC driver hangs when reading faulty card   Rich Rattanni
• [PATCH 1/2] Allow constructor name selection by architecture.   Sam Ravnborg
• [PATCH 1/8] ARM: PCI: remove unused sys->hw   Thierry Reding
• [PATCH 1/8] ARM: PCI: remove unused sys->hw   Thierry Reding
• mc13xxx: add I2C support, V5   Marc Reilly
• [PATCH] ARM: mx35: add cpufreq support   Marc Reilly
• [PATCH 2/2] MFD: mc13xxx workaround SPI hardware bug on i.Mx   Marc Reilly
• Making ARM multiplatform kernels DT-only?   Christian Robottom Reis
• [PATCHv3] Add ADC driver for Atmel G20, G45 and X5 boards   Maxime Ripard
• [PATCH 1/9] ARM: AT91: Add platform data for the AT91 ADCs   Maxime Ripard
• [PATCH 2/9] ARM: AT91: IIO: Add AT91 ADC driver.   Maxime Ripard
• [PATCH 3/9] ARM: AT91: Add the ADC to the sam9g20ek board   Maxime Ripard
• [PATCH 4/9] IIO: AT91: ADC: Add support for the AT91SAM9M10G45-EK board   Maxime Ripard
• [PATCH 5/9] Add clocks for X5 boards   Maxime Ripard
• [PATCH 6/9] IIO: AT91: Add DT support to at91_adc driver   Maxime Ripard
• [PATCH 7/9] Add ADC driver to the at91sam9g45 dtsi   Maxime Ripard
• [PATCH 8/9] Add ADC driver to the at91sam9x5 dtsi   Maxime Ripard
• [PATCH 9/9] Add DTSI for the G20 SoC   Maxime Ripard
• [PATCHv4] Add ADC driver for Atmel G20, G45 and X5 boards   Maxime Ripard
• [PATCH 1/9] ARM: AT91: Add platform data for the AT91 ADCs   Maxime Ripard
• [PATCH 2/9] ARM: AT91: IIO: Add AT91 ADC driver.   Maxime Ripard
• [PATCH 3/9] ARM: AT91: Add the ADC to the sam9g20ek board   Maxime Ripard
• [PATCH 4/9] AT91: ADC: Add support for the AT91SAM9M10G45-EK board   Maxime Ripard
• [PATCH 5/9] ARM: AT91: Add the ADC clock to the sam9x5 SoC file   Maxime Ripard
• [PATCH 6/9] IIO: AT91: Add DT support to at91_adc driver   Maxime Ripard
• [PATCH 7/9] ARM: AT91: Add ADC driver to the at91sam9g45 dtsi   Maxime Ripard
• [PATCH 8/9] ARM: AT91: Add ADC driver to the at91sam9x5 dtsi   Maxime Ripard
• [PATCH 9/9] ARM: AT91: Add ADC driver to the at91sam9g20 dtsi   Maxime Ripard
• [PATCHv3] Add ADC driver for Atmel G20, G45 and X5 boards   Maxime Ripard
• [PATCHv3] Add ADC driver for Atmel G20, G45 and X5 boards   Maxime Ripard
• [PATCHv5] Add ADC driver for Atmel G20, G45 and X5 boards   Maxime Ripard
• [PATCH 1/9] ARM: AT91: Add platform data for the AT91 ADCs   Maxime Ripard
• [PATCH 2/9] ARM: AT91: IIO: Add AT91 ADC driver.   Maxime Ripard
• [PATCH 3/9] ARM: AT91: Add the ADC to the sam9g20ek board   Maxime Ripard
• [PATCH 4/9] AT91: ADC: Add support for the AT91SAM9M10G45-EK board   Maxime Ripard
• [PATCH 5/9] ARM: AT91: Add the ADC clock to the sam9x5 SoC file   Maxime Ripard
• [PATCH 6/9] IIO: AT91: Add DT support to at91_adc driver   Maxime Ripard
• [PATCH 7/9] ARM: AT91: Add ADC driver to the at91sam9g45 dtsi   Maxime Ripard
• [PATCH 8/9] ARM: AT91: Add ADC driver to the at91sam9x5 dtsi   Maxime Ripard
• [PATCH 9/9] ARM: AT91: Add ADC driver to the at91sam9g20 dtsi   Maxime Ripard
• [PATCH] iommu/exynos: Add iommu driver for Exynos Platforms   Joerg Roedel
• [PATCH] iommu/core: pass a user-provided token to fault handlers   Joerg Roedel
• [PATCH 1/2] SPEAr: Add SMI NOR partition info in dts files   Stefan Roese
• [PATCH] ARM: SPEAr600: Fix timer interrupt definition in spear600.dtsi   Stefan Roese
• [PATCH] clk: SPEAr600: Fix ethernet clock name for DT based probing   Stefan Roese
• [PATCH V2] CS89x0 : Use ioread16/iowrite16 on all platforms   Francois Romieu
• [PATCHv3 5/5] cpuidle: coupled: add trace events   Steven Rostedt
• linux-next: manual merge of the arm-soc tree with the mfd tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the arm tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the crypto tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the arm tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the slave-dma tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the l2-mtd tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the omap_dss2 tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the sound-asoc tree   Stephen Rothwell
• linux-next: manual merge of the akpm tree with the arm-soc tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the arm tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the staging tree   Stephen Rothwell
• linux-next: manual merge of the akpm tree with the arm-soc tree   Stephen Rothwell
• [PATCH] ARM: at91: Add ADC driver to at91sam9260/at91sam9g20 dtsi files   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the gpio tree   Stephen Rothwell
• [PATCH] ARM: at91: Add ADC driver to at91sam9260/at91sam9g20 dtsi files   Stephen Rothwell
• Handling of modular boards   Alessandro Rubini
• [PATCH 0/6] Bridging PCI to amba   Alessandro Rubini
• [PATCH 1/6] sizes.h: move from asm-generic to <linux/sizes.h>   Alessandro Rubini
• [PATCH 2/6] amba: use the new linux/sizes.h   Alessandro Rubini
• [PATCH 3/6] ARM: use the new linux/sizes.h   Alessandro Rubini
• [PATCH 4/6] pl011: use the new linux/sizes.h   Alessandro Rubini
• [PATCH 5/6] x86: add CONFIG_ARM_AMBA, selected by STA2X11   Alessandro Rubini
• [PATCH 6/6] serial: add amba-pl011-pci   Alessandro Rubini
• [PATCH 6/6] serial: add amba-pl011-pci   Alessandro Rubini
• [PATCH 6/6] serial: add amba-pl011-pci   Alessandro Rubini
• amba, tegra-ahb and pci (Kconfig question)   Alessandro Rubini
• amba, tegra-ahb and pci (Kconfig question)   Alessandro Rubini
• [PATCH V2 0/6] Bridging PCI to amba   Alessandro Rubini
• [PATCH V2 1/6] sizes.h: move from asm-generic to <linux/sizes.h>   Alessandro Rubini
• [PATCH V2 2/6] amba: use the new linux/sizes.h   Alessandro Rubini
• [PATCH V2 3/6] ARM: use the new linux/sizes.h   Alessandro Rubini
• [PATCH V2 4/6] serial: use the new linux/sizes.h   Alessandro Rubini
• [PATCH V2 5/6] x86: add CONFIG_ARM_AMBA, selected by STA2X11   Alessandro Rubini
• [PATCH V2 6/6] drivers/amba: add support for a PCI bridge   Alessandro Rubini
• amba, tegra-ahb and pci (Kconfig question)   Alessandro Rubini
• [PATCH RFC 0/3] i2c-nomadik changes   Alessandro Rubini
• [PATCH RFC 1/3] i2c-nomadik: move header from <plat/i2c.h> to <linux/i2c-nomadik.h>   Alessandro Rubini
• [PATCH RFC 2/3] i2c-nomadik: turn the platform driver to an amba driver   Alessandro Rubini
• [PATCH RFC 3/3] i2c-nomadik: depend on ARM_AMBA, not PLAT_NOMADIK   Alessandro Rubini
• [PATCH RFC 2/3] i2c-nomadik: turn the platform driver to an amba driver   Alessandro Rubini
• [PATCH] ARM: Enable I$/D$/BrPredict based on config   Måns Rullgård
• [PATCH] ARM: Enable I$/D$/BrPredict based on config   Måns Rullgård
• [PATCH 0/4] MC13783 sound support   Philippe Rétornaz
• [PATCH 1/4] mc13xxx: add codec platform data   Philippe Rétornaz
• [PATCH 2/4] ASoC: Add mc13783 codec   Philippe Rétornaz
• [PATCH 3/4] ASoC: add imx-mc13783 sound support   Philippe Rétornaz
• [PATCH 4/4] mx31moboard: Add sound support   Philippe Rétornaz
• [PATCH 0/1] Enable sound on mx31_3ds   Philippe Rétornaz
• [PATCH 1/1] mx31_3ds: Add sound support   Philippe Rétornaz
• [PATCH 1/2] serial/imx: add DMA support   Philippe Rétornaz
• [PATCH] ASoC: imx-mc13783 cleanup   Philippe Rétornaz
• [PATCH] ASoC: mc13783 codec cleanups   Philippe Rétornaz
• Booting mx31 on linux-next-20120517   Philippe Rétornaz
• Booting mx31 on linux-next-20120517   Philippe Rétornaz
• [PATCH 2/2] MFD: mc13xxx workaround SPI hardware bug on i.Mx   Philippe Rétornaz
• [PATCH] Fix OMAP4 boot regression   S, Venkatraman
• Add gcov support to ARM   Vincent Sanders
• [PATCH 1/2] Allow constructor name selection by architecture.   Vincent Sanders
• [PATCH 2/2] Enable gcov support on the ARM architecture   Vincent Sanders
• [PATCH 1/2] Allow constructor name selection by architecture.   Vincent Sanders
• [PATCH v2 1/5] dma: mxs-dma: use global stmp_device functionality   Wolfram Sang
• [PATCH 0/2] Add device tree probe for i2c-mxs driver   Wolfram Sang
• [PATCH 0/4] MXS: I2C improvements   Wolfram Sang
• I2C pinctrl patches for IMX/MXS   Wolfram Sang
• [PATCHv9 06/10] I2C: OMAP: Fix the crash in i2c remove   Wolfram Sang
• [PATCHv9 00/10] I2C fixes   Wolfram Sang
• Stable I2C branch needed as a dependency for Tegra change   Wolfram Sang
• Making ARM multiplatform kernels DT-only?   Deepak Saxena
• Making ARM multiplatform kernels DT-only?   Deepak Saxena
• [PATCH] video: EXYNOS: enable interrupt again after sw reset   Florian Tobias Schandinat
• [PATCH] video: EXYNOS: changes mipi dsi regulator name from vdd10 to vdd11   Florian Tobias Schandinat
• [PATCH 0/5] video: exynos mipi dsi: fixes some bugs and clean the codes   Florian Tobias Schandinat
• usb, davinci: usb 2.0 problem on an am1808 based board   Heiko Schocher
• [PATCH v3 0/7] ARM: davinci: add support for the am1808 based enbw_cmc board   Heiko Schocher
• [PATCH v3 4/7] ARM: davinci: net: davinci_emac: add OF support   Heiko Schocher
• usb, davinci: usb 2.0 problem on an am1808 based board   Heiko Schocher
• usb, davinci: usb 2.0 problem on an am1808 based board   Heiko Schocher
• usb, davinci: usb 2.0 problem on an am1808 based board   Heiko Schocher
• [PATCH v4 0/7] ARM: davinci: add support for the am1808 based enbw_cmc board   Heiko Schocher
• [PATCH v4 1/7] ARM: davinci, intc: Add irq domain support   Heiko Schocher
• [PATCH v4 2/7] ARM: davinci, intc: Add OF support for TI interrupt controller   Heiko Schocher
• [PATCH v4 3/7] ARM: davinci: configure davinci aemif chipselects through OF   Heiko Schocher
• [PATCH v4 4/7] ARM: davinci: net: davinci_emac: add OF support   Heiko Schocher
• [PATCH v4 5/7] ARM: davinci: i2c: add OF support   Heiko Schocher
• [PATCH v4 6/7] ARM: mtd: nand: davinci: add OF support for davinci nand controller   Heiko Schocher
• [PATCH v4 7/7] ARM: davinci: add support for the am1808 based enbw_cmc board   Heiko Schocher
• [PATCH v3 1/7] ARM: davinci, intc: Add OF support for TI interrupt controller   Heiko Schocher
• [PATCH v4 1/7] ARM: davinci, intc: Add irq domain support   Heiko Schocher
• [PATCH v4 5/7] ARM: davinci: i2c: add OF support   Heiko Schocher
• usb, davinci: usb 2.0 problem on an am1808 based board   Heiko Schocher
• [PATCH v5 0/7] ARM: davinci: add support for the am1808 based enbw_cmc board   Heiko Schocher
• [PATCH v5 1/7] ARM: davinci, cp_intc: Add irq domain support   Heiko Schocher
• [PATCH v5 2/7] ARM: davinci, cp_intc: Add OF support for TI interrupt controller   Heiko Schocher
• [PATCH v5 3/7] ARM: davinci: configure davinci aemif chipselects through OF   Heiko Schocher
• [PATCH v5 4/7] ARM: davinci: net: davinci_emac: add OF support   Heiko Schocher
• [PATCH v5 5/7] ARM: davinci: i2c: add OF support   Heiko Schocher
• [PATCH v5 6/7] ARM: mtd: nand: davinci: add OF support for davinci nand controller   Heiko Schocher
• [PATCH v5 7/7] ARM: davinci: add support for the am1808 based enbw_cmc board   Heiko Schocher
• moving Tegra30 to the common clock framework   Peter De Schrijver
• moving Tegra30 to the common clock framework   Peter De Schrijver
• moving Tegra30 to the common clock framework   Peter De Schrijver
• moving Tegra30 to the common clock framework   Peter De Schrijver
• [PATCH] ARM: tegra: Fix flow controller accesses   Peter De Schrijver
• moving Tegra30 to the common clock framework   Peter De Schrijver
• moving Tegra30 to the common clock framework   Peter De Schrijver
• moving Tegra30 to the common clock framework   Peter De Schrijver
• [PATCH RFC] clk: add table lookup to mux   Peter De Schrijver
• Clock register in early init   Peter De Schrijver
• Clock register in early init   Peter De Schrijver
• Clock register in early init   Peter De Schrijver
• Clock register in early init   Peter De Schrijver
• [PATCH] clk: Fix race conditions between clk_set_parent() and clk_enable()   Peter De Schrijver
• [PATCH] clk: Fix race conditions between clk_set_parent() and clk_enable()   Peter De Schrijver
• Clock register in early init   Peter De Schrijver
• [RFC PATCH] clk: add extension API   Peter De Schrijver
• [RFC PATCH] clk: add extension API   Peter De Schrijver
• [RFC PATCH] clk: add extension API   Peter De Schrijver
• [RFC PATCH] clk: add extension API   Peter De Schrijver
• [RFC PATCH] clk: add extension API   Peter De Schrijver
• [RFC PATCH] clk: add extension API   Peter De Schrijver
• [RFC PATCH] clk: add extension API   Peter De Schrijver
• [RFC PATCH] clk: add extension API   Peter De Schrijver
• [PATCH v2 1/3] mtd: gpmi: add device tree support for mx6q and mx28   Huang Shijie
• [PATCH v2 1/3] mtd: gpmi: add device tree support for mx6q and mx28   Huang Shijie
• [PATCH v3] mtd: gpmi: add device tree support for mx6q and mx28   Huang Shijie
• [PATCH] serial/imx: enable the clock when we really use the uart port   Huang Shijie
• [PATCH] serial/imx: enable the clock when we really use the uart port   Huang Shijie
• [PATCH v3] mtd: gpmi: add device tree support for mx6q and mx28   Huang Shijie
• [PATCH v3] mtd: gpmi: add device tree support for mx6q and mx28   Huang Shijie
• [PATCH v3] mtd: gpmi: add device tree support for mx6q and mx28   Huang Shijie
• [PATCH 1/2] mtd: gpmi: add device tree support to gpmi-nand   Huang Shijie
• [PATCH 2/2] mtd: gpmi: add gpmi support for mx6q   Huang Shijie
• [PATCH 1/2] mtd: gpmi: add device tree support to gpmi-nand   Huang Shijie
• [PATCH 1/2] mtd: gpmi: add device tree support to gpmi-nand   Huang Shijie
• [PATCH v2 1/2] mtd: gpmi: add device tree support to gpmi-nand   Huang Shijie
• [PATCH v2 2/2] mtd: gpmi: add gpmi support for mx6q   Huang Shijie
• Bug in v7_coherent_kern_range() ?   Huang Shijie
• Cyclic DMA - callback properties and tx_status residue   Huang Shijie
• [PATCH] MTD: LPC32xx SLC NAND driver   Huang Shijie
• [PATCH 1/2] serial/imx: add DMA support   Huang Shijie
• [PATCH 1/4] GPMI-NAND: Define ecc.strength   Huang Shijie
• [PATCH 1/4] GPMI-NAND: Define ecc.strength   Huang Shijie
• [PATCH] GPMI-NAND: Define ecc.strength   Huang Shijie
• [PATCH] GPMI-NAND: Define ecc.strength   Huang Shijie
• [PATCH V2] GPMI-NAND: Define ecc.strength   Huang Shijie
• [PATCH] ARM: mx28: add gpmi-nand dt support   Huang Shijie
• [PATCH 1/5] ARM: imx6q: add DT node for apbh-dma   Huang Shijie
• [PATCH 2/5] ARM: imx6q: add clock for apbh-dma   Huang Shijie
• [PATCH 3/5] dma: mxs-dma: enable apbh-dma for imx6q   Huang Shijie
• [PATCH 4/5] ARM: imx6q: add DT node for gpmi-nand   Huang Shijie
• [PATCH 5/5] ARM: imx6q: add clocks for gpmi-nand   Huang Shijie
• [PATCH 2/5] ARM: imx6q: add clock for apbh-dma   Huang Shijie
• [PATCH 1/2] ARM: mx28: add gpmi-nand support   Huang Shijie
• [PATCH 2/2] clk: mxs: rename the gpmi clock for imx28   Huang Shijie
• [PATCH 1/5] ARM: imx6q: add DT node for apbh-dma   Huang Shijie
• [PATCH 00/18][V3] ARM: OMAP3/4 : cpuidle34xx and cpuidle44xx cleanups   Shilimkar, Santosh
• [PATCH v5 0/7] Add TI EMIF SDRAM controller driver   Santosh Shilimkar
• [PATCHv3 0/5] coupled cpuidle state support   Santosh Shilimkar
• About CPU hotplug stress test failed   Santosh Shilimkar
• [PATCH 0/7] ARM: OMAP2+: Misc cleanup   Santosh Shilimkar
• [PATCH 1/7] ARM: OMAP4: Don't compile cm2xxx_3xxx.c for OMAP4 only builds.   Santosh Shilimkar
• [PATCH 2/7] ARM: OMAP2+: Clean up wrapping multiple objects in Makefile   Santosh Shilimkar
• [PATCH 3/7] ARM: OMAP4: Remove un-used WakeupGen register defines.   Santosh Shilimkar
• [PATCH 4/7] ARM: OMAP: dma: Make use of cpu_class_is_omap2() to avoid future patching.   Santosh Shilimkar
• [PATCH 5/7] ARM: All OMAP2PLUS machines use omap2 directory so just add one entry   Santosh Shilimkar
• [PATCH 6/7] ARM: OMAP4: Reduce the static IO mapping   Santosh Shilimkar
• [PATCH 7/7] ARM: OMAP4+: Add prm and cm base init function.   Santosh Shilimkar
• [PATCH 2/7] ARM: OMAP2+: Clean up wrapping multiple objects in Makefile   Shilimkar, Santosh
• [PATCH 01/19] ARM: OMAP4: PM: save/restore all DPLL settings in OFF mode   Shilimkar, Santosh
• [PATCH 01/19] ARM: OMAP4: PM: save/restore all DPLL settings in OFF mode   Shilimkar, Santosh
• [PATCH 01/19] ARM: OMAP4: PM: save/restore all DPLL settings in OFF mode   Shilimkar, Santosh
• [PATCH 01/19] ARM: OMAP4: PM: save/restore all DPLL settings in OFF mode   Shilimkar, Santosh
• [PATCH v5 0/7] Add TI EMIF SDRAM controller driver   Shilimkar, Santosh
• [PATCH 1/8] gpio/omap: remove virtual_irq_start variable   Santosh Shilimkar
• [PATCH 7/8] gpio/omap: remove cpu_is_omapxxxx() checks from *_runtime_resume()   Santosh Shilimkar
• [PATCH 8/8] gpio/omap: fix missing check in *_runtime_suspend()   Santosh Shilimkar
• [PATCH 0/8] gpio/omap: remaining cleanups and fix   Santosh Shilimkar
• [PATCH v5 0/7] Add TI EMIF SDRAM controller driver   Santosh Shilimkar
• [PATCH 4/7] ARM: OMAP: dma: Make use of cpu_class_is_omap2() to avoid future patching.   Shilimkar, Santosh
• [PATCH] ARM: OMAP2+: dma: Define dma capabilities register bitfields and use them.   Shilimkar, Santosh
• [PATCH 08/13] ARM: OMAP5: Add the WakeupGen IP updates.   Santosh Shilimkar
• [PATCH 00/13] ARM: OMAP5: Add minimal OMAP5 SOC support   Santosh Shilimkar
• [PATCH-V4 0/4] ARM: OMAP2+: Add voltagedomain, powerdomain & PRM support for AM33XX device   Shilimkar, Santosh
• [PATCH] ARM: decompressor: Fix mmu mapping for non-DRAM address space.   Santosh Shilimkar
• [PATCH 1/7] ARM: OMAP4: Don't compile cm2xxx_3xxx.c for OMAP4 only builds.   Shilimkar, Santosh
• [PATCH 7/7] ARM: OMAP4+: Add prm and cm base init function.   Shilimkar, Santosh
• [GIT PULL] ARM: OMAP2+: Misc cleanup   Santosh Shilimkar
• [PATCH 0/7] ARM: OMAP2+: Misc cleanup   Santosh Shilimkar
• [PATCH 00/13] ARM: OMAP5: Add minimal OMAP5 SOC support   Santosh Shilimkar
• [PATCH 09/13] ARM: OMAP5: Add SMP support.   Santosh Shilimkar
• [PATCH] ARM: decompressor: Fix mmu mapping for non-DRAM address space.   Shilimkar, Santosh
• [PATCH] ARM: decompressor: Fix mmu mapping for non-DRAM address space.   Santosh Shilimkar
• [PATCH] ARM: decompressor: Fix mmu mapping for non-DRAM address space.   Santosh Shilimkar
• [PATCH 0/3] ARM: OMAP2+: Kconfig: minor cleanup for SOC names   Shilimkar, Santosh
• [PATCH] ARM: decompressor: Fix mmu mapping for non-DRAM address space.   Shilimkar, Santosh
• [PATCH] ARM: decompressor: Fix mmu mapping for non-DRAM address space.   Shilimkar, Santosh
• oprofile and ARM A9 hardware counter   Santosh Shilimkar
• [PATCH] ARM: decompressor: Fix mmu mapping for non-DRAM address space.   Santosh Shilimkar
• [PATCH] ARM: decompressor: Fix mmu mapping for non-DRAM address space.   Santosh Shilimkar
• [PATCH 08/13] ARM: OMAP5: Add the WakeupGen IP updates.   Shilimkar, Santosh
• [PATCH 08/13] ARM: OMAP5: Add the WakeupGen IP updates.   Santosh Shilimkar
• [PATCH] ARM: OMAP2+: CLEANUP: Remove ARCH_OMAPx ifdef from struct dpll_data   Shilimkar, Santosh
• [PATCH] ARM: OMAP4: PM: Keep static dep between MPUSS and ABE clockdomain   Shilimkar, Santosh
• [PATCHv5 3/8] ARM: OMAP4460: Workaround for ROM bug because of CA9 r2pX gic control register change   Santosh Shilimkar
• [PATCHv5 3/8] ARM: OMAP4460: Workaround for ROM bug because of CA9 r2pX gic control register change   Santosh Shilimkar
• [PATCHv5 3/8] ARM: OMAP4460: Workaround for ROM bug because of CA9 r2pX gic control register change   Santosh Shilimkar
• [PATCHv5 3/8] ARM: OMAP4460: Workaround for ROM bug because of CA9 r2pX gic control register change   Shilimkar, Santosh
• [PATCHv2 10/19] ARM: OMAP4: PM: Work-around for ROM code BUG of IVAHD/TESLA   Shilimkar, Santosh
• [PATCHv2 11/19] ARM: OMAP4: PM: save/restore CM L3INSTR registers when MPU hits OSWR/OFF mode   Shilimkar, Santosh
• [PATCHv2 06/19] ARM: OMAP4: PM: Add SAR backup support towards device OFF   Shilimkar, Santosh
• [PATCHv2 04/19] ARM: OMAP4: PM: save/restore all DPLL settings in OFF mode   Shilimkar, Santosh
• [PATCHv2 05/19] ARM: OMAP4: PM: save/restore all CM1/2 settings in OFF mode   Shilimkar, Santosh
• [PATCHv2 03/19] ARM: OMAP4: PM: Add device-off support   Shilimkar, Santosh
• [PATCHv2 15/19] ARM: OMAP4430: PM: workaround for DDR corruption on second CS   Shilimkar, Santosh
• L1 & L2 cache flush sequence on CortexA5 MPcore w.r.t low power modes   Shilimkar, Santosh
• [PATCHv2 04/19] ARM: OMAP4: PM: save/restore all DPLL settings in OFF mode   Shilimkar, Santosh
• [PATCH 2/6] ARM: OMAP2+: PM: introduce power domains functional states   Santosh Shilimkar
• [PATCHv2 06/19] ARM: OMAP4: PM: Add SAR backup support towards device OFF   Shilimkar, Santosh
• [PATCHv2 10/19] ARM: OMAP4: PM: Work-around for ROM code BUG of IVAHD/TESLA   Shilimkar, Santosh
• [PATCHv2 15/19] ARM: OMAP4430: PM: workaround for DDR corruption on second CS   Shilimkar, Santosh
• [PATCHv5 3/8] ARM: OMAP4460: Workaround for ROM bug because of CA9 r2pX gic control register change   Shilimkar, Santosh
• [PATCH 8/8] gpio/omap: fix missing check in *_runtime_suspend()   Shilimkar, Santosh
• [PATCH] ARM: OMAP2+: fix gpmc request_irq   Shilimkar, Santosh
• [PATCH] ARM: OMAP2+: fix gpmc request_irq   Shilimkar, Santosh
• [PATCH] ARM: OMAP2+: fix gpmc request_irq   Shilimkar, Santosh
• [PATCH] ARM: OMAP2+: fix gpmc request_irq   Shilimkar, Santosh
• [PATCHv3 0/4] coupled cpuidle state support   Santosh Shilimkar
• [PATCH] ARM: OMAP2+: fix gpmc request_irq   Shilimkar, Santosh
• [PATCHv3 0/4] coupled cpuidle state support   Shilimkar, Santosh
• [PATCH v2] RFC: ARM: cache-l2x0: update workaround for PL310 errata 727915   Shilimkar, Santosh
• [PATCH 0/2] bug fixes for coupled cpuidle   Santosh Shilimkar
• [PATCH v2 0/4] OMAP4: CPUidle: Add coupled idle support   Santosh Shilimkar
• [PATCH v2 1/4] ARM: OMAP: timer: allow gp timer clock-event to be used on both cpus   Santosh Shilimkar
• [PATCH v2 2/4] ARM: OMAP4: CPUidle: Use coupled cpuidle states to implement SMP cpuidle.   Santosh Shilimkar
• [PATCH v2 3/4] ARM: OMAP4: CPUidle: add synchronization for coupled idle states   Santosh Shilimkar
• [PATCH v2 4/4] ARM: OMAP4: CPUidle: Open broadcast clock-event device.   Santosh Shilimkar
• [PATCH v2] RFC: ARM: cache-l2x0: update workaround for PL310 errata 727915   Santosh Shilimkar
• [PATCHv2 14/19] ARM: OMAP4: wakeupgen: enable clocks for save_secure_all   Shilimkar, Santosh
• [PATCHv2 14/19] ARM: OMAP4: wakeupgen: enable clocks for save_secure_all   Shilimkar, Santosh
• [PATCHv2 17/19] ARM: OMAP4: put cpu1 back to sleep if no wake request   Shilimkar, Santosh
• [PATCH 2/6] ARM: OMAP2+: PM: introduce power domains functional states   Shilimkar, Santosh
• [PATCH v2] RFC: ARM: cache-l2x0: update workaround for PL310 errata 727915   Santosh Shilimkar
• [PATCH 2/6] ARM: OMAP2+: PM: introduce power domains functional states   Santosh Shilimkar
• [RFC PATCH 01/11] ARM: OMAP4: Remove un-used control module headers and defines.   Shilimkar, Santosh
• [RFC PATCH 02/11] ARM: OMAP: expose control.h to mach area   Shilimkar, Santosh
• [RFC PATCH 10/11] omap4: thermal: add basic CPU thermal zone   Shilimkar, Santosh
• [RFC PATCH 05/11] mfd: omap: control: core system control driver   Shilimkar, Santosh
• [RFC PATCH 04/11] OMAP: Add early device for system control module   Shilimkar, Santosh
• [RFC PATCH 06/11] OMAP2+: use control module mfd driver in omap_type   Shilimkar, Santosh
• [RFC PATCH 08/11] ARM: OMAP4+: Adding the temperature sensor register set bit fields   Shilimkar, Santosh
• [PATCH v2] RFC: ARM: cache-l2x0: update workaround for PL310 errata 727915   Shilimkar, Santosh
• [RFC PATCH 05/11] mfd: omap: control: core system control driver   Shilimkar, Santosh
• [RFC PATCH 1/5] arm: omap: hwmod: make *phy_48m* as the main_clk of ocp2scp   Shilimkar, Santosh
• [RFC PATCH 2/5] arm: omap: remove ocp2scp_usb_phy_ick clock node   Shilimkar, Santosh
• [RFC PATCH 3/5] drivers: misc: omap: add a new driver for ocp2scp   Shilimkar, Santosh
• [RFC PATCH 1/3] drivers: usb: otg: add a new driver for omap usb2 phy   Shilimkar, Santosh
• [RFC PATCH 3/3] arm: omap: phy: remove unused functions from omap-phy-internal.c   Shilimkar, Santosh
• [PATCHv2 04/19] ARM: OMAP4: PM: save/restore all DPLL settings in OFF mode   Shilimkar, Santosh
• [PATCH 1/2] ARM: EXYYNOS: Use EXYNOS4210_GPEx instead of EXYNOS4_GPEx   Joonyoung Shim
• [PATCH 2/2] gpio/exynos: Add support for Exynos4x12 SoC   Joonyoung Shim
• [PATCH 1/2] ARM: EXYYNOS: Use EXYNOS4210_GPEx instead of EXYNOS4_GPEx   Joonyoung Shim
• [PATCH 2/2] gpio/exynos: Add support for Exynos4x12 SoC   Joonyoung Shim
• [PATCH v1 2/7] usb: chipidea: remove zero check of hw_ep_max   Alexander Shishkin
• [PATCH] usb: chipidea: improve the validation of endpoint count   Alexander Shishkin
• [PATCH v1 4/7] usb: chipidea: add imx driver binding   Alexander Shishkin
• [PATCH v1 4/7] usb: chipidea: add imx driver binding   Alexander Shishkin
• [PATCH v2 05/12] usb: chipidea: add imx driver binding   Alexander Shishkin
• [PATCH v2 02/12] usb: chipidea: permit driver bindings pass phy pointer   Alexander Shishkin
• [PATCH v2 05/12] usb: chipidea: add imx driver binding   Alexander Shishkin
• [PATCH v2 05/12] usb: chipidea: add imx driver binding   Alexander Shishkin
• [PATCH v2 05/12] usb: chipidea: add imx driver binding   Alexander Shishkin
• [PATCH v2 02/12] usb: chipidea: permit driver bindings pass phy pointer   Alexander Shishkin
• [PATCH v2 05/12] usb: chipidea: add imx driver binding   Alexander Shishkin
• [PATCH v2 05/12] usb: chipidea: add imx driver binding   Alexander Shishkin
• [PATCH v3 05/12] usb: chipidea: add imx platform driver   Alexander Shishkin
• [PATCH v3 05/12] usb: chipidea: add imx platform driver   Alexander Shishkin
• [PATCH] ARM: clps711x: Using a single definition for the PHYS and VIRT registers offset   Alexander Shiyan
• [PATCH] ARM: clps711x/cleanup: Combine header files into one for clps711x-targets   Alexander Shiyan
• [PATCH 1/4] ARM: clps711x: Used own subarch directory for store header file   Alexander Shiyan
• [PATCH 2/4] ARM: clps711x: Added missing register definitions   Alexander Shiyan
• [PATCH 3/4] ARM: clps711x: Added note about support EP731x CPU to Kconfig   Alexander Shiyan
• [PATCH 4/4] ARM clps711x: Removed unused header mach/time.h   Alexander Shiyan
• [PATCH 0/2] ARM: clps711x: Last 2 patches   Alexander Shiyan
• [PATCH 1/2] ARM: clps711x: Cleanup IRQ handling   Alexander Shiyan
• [PATCH 2/2] ARM: clps711x: Added support for CPU frequencies other than 73 MHz   Alexander Shiyan
• Re[2]: [PATCH 2/2] ARM: clps711x: Added support for CPU frequencies other than 73 MHz   Alexander Shiyan
• [PATCH v4 06/39] ARM: OMAP2+: onenand: return value in init function   Sergei Shtylyov
• [PATCH] ARM: BCMRING: Fix UART declaration and clk dev name mismatch   Sergei Shtylyov
• [PATCH 1/1] Add missing include <plat/cpu.h> in drivers/mfd/omap-usb-host.c   Sergei Shtylyov
• [PATCH] USB: ohci-at91: add a reset function to fix race condition   Sergei Shtylyov
• usb, davinci: usb 2.0 problem on an am1808 based board   Sergei Shtylyov
• [PATCH v4 1/7] ARM: davinci, intc: Add irq domain support   Sergei Shtylyov
• [PATCHv9 06/10] I2C: OMAP: Fix the crash in i2c remove   Shubhrajyoti
• [PATCHv9 00/10] I2C fixes   Shubhrajyoti
• [PATCHv9 00/10] I2C fixes   Shubhrajyoti
• [PATCHv9 02/10] I2C: OMAP: Fix the mismatch of pm_runtime enable and disable   Shubhrajyoti
• [PATCHv9 07/10] I2C: OMAP: Handle error check for pm runtime   Shubhrajyoti
• ARM: ETH PHY Micrel: KSZ8051MNL Driver?   Baruch Siach
• Linux Kernel boot up stops after message "Uncompressing Linux....done, booting the kernel"   Baruch Siach
• [PATCH 0/2] OMAPDSS: write-through caching support for omapfb   Siarhei Siamashka
• [PATCH 1/2] ARM: pgtable: add pgprot_writethrough() macro   Siarhei Siamashka
• [PATCH 2/2] OMAPDSS: Optionally enable write-through cache for the framebuffer   Siarhei Siamashka
• [PATCH 0/2] OMAPDSS: write-through caching support for omapfb   Siarhei Siamashka
• [PATCH 0/2] OMAPDSS: write-through caching support for omapfb   Siarhei Siamashka
• arm: Remaining issue with alignment of __log_buf in printk.c   Kay Sievers
• [PATCH 1/7] remoteproc: resource table overhaul   Michal Simek
• [PATCH 1/7] remoteproc: resource table overhaul   Michal Simek
• [PATCH 1/7] remoteproc: resource table overhaul   Michal Simek
• [PATCH 0/2] regulator: add initial suport for max77686   Yadwinder Singh
• [PATCH 1/2] mfd: Add support for MAX77686.   Yadwinder Singh
• [PATCH 2/2] regulator: Add support for MAX77686.   Yadwinder Singh
• CSR SiRFSoC PRIMA2: SPI compilation broken in 3.4-rc7   Barry Song
• [PATCH] SPI: PRIMA2: use the newest APIs of PINCTRL to fix compiling errors   Barry Song
• [PATCH] ARM: PRIMA2: select PINCTRL and PINCTRL_SIRF in Kconfig   Barry Song
• [PATCH] ARM: PRIMA2: add prima2_defconfig for CSR SiRFprimaII   Barry Song
• [PATCH] ARM: PRIMA2: fix irq domain size and IRQ mask of internal interrupt controller   Barry Song
• [PATCH] pinctrl: sirf: mark of_device_id match table as __devinitconst   Barry Song
• [PATCH] PINCTRL: SiRF: add CSR SiRFprimaII GPIO driver depending on pinmux APIs   Barry Song
• [Linaro-mm-sig] [GIT PULL] CMA and ARM DMA-mapping updates for v3.5   Barry Song
• [PATCH] PINCTRL: SiRF: add CSR SiRFprimaII GPIO driver depending on pinmux APIs   Barry Song
• [PATCH] PINCTRL: SiRF: add CSR SiRFprimaII GPIO driver depending on pinmux APIs   Barry Song
• [PATCH v2 06/17] ARM: dma-mapping: fix for speculative accesses   Rui Sousa
• Linux Kernel boot up stops after message "Uncompressing Linux....done, booting the kernel"   Arend van Spriel
• [PATCH 00/13] ARM: OMAP5: Add minimal OMAP5 SOC support   R Sricharan
• [PATCH 01/13] ARM: OMAP5: id: Add cpu id for ES versions   R Sricharan
• [PATCH 02/13] ARM: OMAP5: Add minimal support for OMAP5430 SOC   R Sricharan
• [PATCH 03/13] TEMP: ARM: OMAP5: Add cpu_is_omap54xx() checks.   R Sricharan
• [PATCH 04/13] ARM: OMAP5: timer: Add clocksource, clockevent support   R Sricharan
• [PATCH 05/13] TEMP: ARM: OMAP5: Update the base address of the 32k-counter.   R Sricharan
• [PATCH 06/13] ARM: OMAP5: gpmc: Update gpmc_init()   R Sricharan
• [PATCH 07/13] ARM: OMAP5: l3: Add l3 error handler support for omap5.   R Sricharan
• [PATCH 08/13] ARM: OMAP5: Add the WakeupGen IP updates.   R Sricharan
• [PATCH 09/13] ARM: OMAP5: Add SMP support.   R Sricharan
• [PATCH 10/13] ARM: OMAP5: board-generic: Add device tree support.   R Sricharan
• [PATCH 11/13] arm/dts: OMAP5: Add omap5 dts files   R Sricharan
• [PATCH 12/13] ARM: OMAP5: Add the build support   R Sricharan
• [PATCH 13/13] ARM: Kconfig update to support additional GPIOs in OMAP5   R Sricharan
• [PATCH] ARM: OMAP2+: dma: Define dma capabilities register bitfields and use them.   R Sricharan
• [PATCH 0/4] ARM: OMAP2+: Misc cleanup part2   R Sricharan
• [PATCH 1/4] ARM: OMAP2+: Introduce CONFIG_SOC_HAS_OMAP_DPLL macro   R Sricharan
• [PATCH 2/4] ARM: OMAP2+: Move the stubbed prm and cm functions to prcm.c file and make them __weak.   R Sricharan
• [PATCH 3/4] ARM: OMAP2+: Move stubbed secure_sram_reserve function to a common.c and call it __weak   R Sricharan
• [PATCH 4/4] ARM: OMAP: counter-32k: Select the CR register offset using the IP scheme.   R Sricharan
• [PATCH 2/3] ARM: OMAP3+: PM: introduce a central pmic control   Vishwanath Sripathy
• [PATCH] USB: ohci-at91: add a reset function to fix race condition   Alan Stern
• [PATCH RESEND v5] rtc: Add device tree support for LPC32xx   Roland Stigge
• [PATCH v8] gpio: Device tree support for LPC32xx   Roland Stigge
• [PATCH RESEND] Documentation: devicetree: Fix value format description   Roland Stigge
• [PATCH RESEND v3 1/2] input: keyboard: Add keys driver for the LPC32xx SoC   Roland Stigge
• [PATCH RESEND v3 1/2] input: keyboard: Add keys driver for the LPC32xx SoC   Roland Stigge
• [PATCH RESEND v3 2/2] ARM: LPC32xx: Make platform use key driver   Roland Stigge
• [GIT PULL] input: keyboard: Add keys driver for the LPC32xx SoC   Roland Stigge
• [PATCH RESEND] Documentation: devicetree: Fix value format description   Roland Stigge
• [PATCH RESEND v8] gpio: Device tree support for LPC32xx   Roland Stigge
• [PATCH v9 1/2] gpio: Adjust of_xlate API to support multiple GPIO chips   Roland Stigge
• [PATCH v9 2/2] gpio: Device tree support for LPC32xx   Roland Stigge
• [PATCH RESEND v8] gpio: Device tree support for LPC32xx   Roland Stigge
• [PATCH] MTD: LPC32xx SLC NAND driver   Roland Stigge
• [PATCH] MTD: LPC32xx SLC NAND driver   Roland Stigge
• [PATCH] MTD: LPC32xx SLC NAND driver   Roland Stigge
• [PATCH v2] MTD: LPC32xx SLC NAND driver   Roland Stigge
• [PATCH] MTD: LPC32xx MLC NAND driver   Roland Stigge
• [PATCH] MTD: LPC32xx MLC NAND driver   Roland Stigge
• [PATCH] MTD: LPC32xx MLC NAND driver   Roland Stigge
• [PATCH v3] MTD: LPC32xx SLC NAND driver   Roland Stigge
• [PATCH v2] MTD: LPC32xx MLC NAND driver   Roland Stigge
• [RFC] pl08x: don't use dma_slave_config direction argument   Roland Stigge
• [RFC] pl08x: don't use dma_slave_config direction argument   Roland Stigge
• [RFC] pl08x: don't use dma_slave_config direction argument   Roland Stigge
• [RFC] pl08x: don't use dma_slave_config direction argument   Roland Stigge
• [PATCH RESEND v3 1/2] input: keyboard: Add keys driver for the LPC32xx SoC   Roland Stigge
• [PATCH RESEND v3 2/2] ARM: LPC32xx: Make platform use key driver   Roland Stigge
• [PATCH RESEND] Documentation: devicetree: Fix value format description   Roland Stigge
• [PATCH RESEND v9 1/2] gpio: Adjust of_xlate API to support multiple GPIO chips   Roland Stigge
• [PATCH RESEND v9 2/2] gpio: Device tree support for LPC32xx   Roland Stigge
• [PATCH RESEND v9 1/2] gpio: Adjust of_xlate API to support multiple GPIO chips   Roland Stigge
• [PATCH RESEND v3 1/2] input: keyboard: Add keys driver for the LPC32xx SoC   Roland Stigge
• [PATCH] ARM: LPC32xx: Adjust dts files to gpio dt binding   Roland Stigge
• [PATCH RFC] serial/8250: Adjusting FIFO parameters for LPC32xx   Roland Stigge
• [PATCH RFC] serial/8250: Adjusting FIFO parameters for LPC32xx   Roland Stigge
• [PATCH RFC] serial/8250: Adjusting FIFO parameters for LPC32xx   Roland Stigge
• [PATCH] serial/of-serial: Add 16654 chip to compatible string list   Roland Stigge
• [PATCH] serial/of-serial: Add 16654 chip to compatible string list   Roland Stigge
• [PATCH] serial/of-serial: Add 16654 chip to compatible string list   Roland Stigge
• [PATCH] serial/of-serial: Add 16654 chip to compatible string list   Roland Stigge
• [PATCH] serial/of-serial: Add 16654 chip to compatible string list   Roland Stigge
• [PATCH 1/2] serial/8250: Add LPC3220 standard UART type   Roland Stigge
• [PATCH 2/2] serial/of-serial: Add LPC3220 standard UART compatible string   Roland Stigge
• [PATCH] serial: Add driver for LPC32xx High Speed UARTs   Roland Stigge
• [PATCH 0/5] ARM: S3C24XX: move the easy parts to mach-s3c24xx from plat-s3c24xx   Heiko Stübner
• [PATCH 1/5] ARM: S3C24XX: move plat-s3c24xx/cpu.c   Heiko Stübner
• [PATCH 2/5] ARM: S3C24XX: move plat-s3c24xx/irq.c into common.c   Heiko Stübner
• [PATCH 3/5] ARM: S3C24XX: move plat-s3c24xx/dev-uart.c into common.c   Heiko Stübner
• [PATCH 4/5] ARM: S3C24XX: move common power-management code to mach-s3c24xx   Heiko Stübner
• [PATCH 5/5] ARM: S3C24XX: move common clock init into common.c   Heiko Stübner
• [PATCH 2/5] ARM: S3C24XX: move plat-s3c24xx/irq.c into common.c   Heiko Stübner
• [PATCH v2 0/4] ARM: S3C24XX: move some code from plat to mach directory   Heiko Stübner
• [PATCH 1/4] ARM: S3C24XX: move plat-s3c24xx/cpu.c   Heiko Stübner
• [PATCH 2/4] ARM: S3C24XX: move plat-s3c24xx/dev-uart.c into common.c   Heiko Stübner
• [PATCH 3/4] ARM: S3C24XX: move common power-management code to mach-s3c24xx   Heiko Stübner
• [PATCH 4/4] ARM: S3C24XX: move common clock init into common.c   Heiko Stübner
• [PATCH v2 06/33] ARM: S3C24XX: dev-uart: Use common macro to define resources   Heiko Stübner
• [PATCH 06/10] ARM: Samsung: Modify s3c64xx_spi{0|1|2}_set_platdata function   Heiko Stübner
• [PATCH 07/10] spi: s3c64xx: Remove the 'set_level' callback from controller data   Heiko Stübner
• [PATCH] ARM: S3C24XX: add support for second irq set of S3C2416   Heiko Stübner
• [PATCH 0/2] ARM: S3C64xx: cpuidle cleanups   Heiko Stübner
• mv_cesa dcache problem since 2.6.37 was: Re: mv_cesa hash functions   Phil Sutter
• [PATCH 03/15] ARM: ep93xx: use machine specific hook for late init   H Hartley Sweeten
• [PATCH 01/15] ARM: provide a late_initcall hook for platform initialization   H Hartley Sweeten
• [PATCH 1/2] gpio/generic: initialize basic_mmio_gpio shadow variables properly   H Hartley Sweeten
• [PATCH] staging: comedi: Make COMEDI_FC a hidden Kconfig option   H Hartley Sweeten
• [PATCH] staging: comedi: Make COMEDI_FC a hidden Kconfig option   H Hartley Sweeten
• [PATCH] ARM: Exynos4: add support for GATE BLOCK clocks   Marek Szyprowski
• [PATCHv2 0/3] Add support for DRM display subsystem   Marek Szyprowski
• [PATCH v2] ARM: Exynos4: read initial state of power domain from hw registers   Marek Szyprowski
• [PATCH] drivers: cma: don't fail if migration returns -EAGAIN   Marek Szyprowski
• [PATCHv9 10/10] ARM: dma-mapping: add support for IOMMU mapper   Marek Szyprowski
• Bad use of highmem with buffer_migrate_page?   Marek Szyprowski
• [PATCH] ARM: dma-mapping: fix build break on no-MMU systems   Marek Szyprowski
• [Linaro-mm-sig] [PATCH] ARM: LPAE: fix access flag setup in mem_type_table   Marek Szyprowski
• [PATCHv2 0/4] ARM: replace custom consistent dma region with vmalloc   Marek Szyprowski
• [PATCHv2 1/4] mm: vmalloc: use const void * for caller argument   Marek Szyprowski
• [PATCHv2 2/4] mm: vmalloc: export find_vm_area() function   Marek Szyprowski
• [PATCHv2 3/4] mm: vmalloc: add VM_DMA flag to indicate areas used by dma-mapping framework   Marek Szyprowski
• [PATCHv2 4/4] ARM: dma-mapping: remove custom consistent dma region   Marek Szyprowski
• [PATCHv10 00/11] ARM: DMA-mapping framework redesign   Marek Szyprowski
• [PATCHv10 01/11] common: add dma_mmap_from_coherent() function   Marek Szyprowski
• [PATCHv10 02/11] ARM: dma-mapping: use dma_mmap_from_coherent()   Marek Szyprowski
• [PATCHv10 03/11] ARM: dma-mapping: use pr_* instread of printk   Marek Szyprowski
• [PATCHv10 04/11] ARM: dma-mapping: introduce DMA_ERROR_CODE constant   Marek Szyprowski
• [PATCHv10 05/11] ARM: dma-mapping: remove offset parameter to prepare for generic dma_ops   Marek Szyprowski
• [PATCHv10 06/11] ARM: dma-mapping: use asm-generic/dma-mapping-common.h   Marek Szyprowski
• [PATCHv10 07/11] ARM: dma-mapping: implement dma sg methods on top of any generic dma ops   Marek Szyprowski
• [PATCHv10 08/11] ARM: dma-mapping: move all dma bounce code to separate dma ops structure   Marek Szyprowski
• [PATCHv10 09/11] ARM: dma-mapping: remove redundant code and do the cleanup   Marek Szyprowski
• [PATCHv10 10/11] ARM: dma-mapping: use alloc, mmap, free from dma_ops   Marek Szyprowski
• [PATCHv10 11/11] ARM: dma-mapping: add support for IOMMU mapper   Marek Szyprowski
• [PATCHv2 updated] ARM: dma-mapping: remove custom consistent dma region   Marek Szyprowski
• [PATCH/RFC 0/3] ARM: DMA-mapping: new extensions for buffer sharing   Marek Szyprowski
• [PATCH 1/3] common: DMA-mapping: add DMA_ATTR_NO_KERNEL_MAPPING attribute   Marek Szyprowski
• [PATCH 2/3] ARM: dma-mapping: add support for DMA_ATTR_NO_KERNEL_MAPPING attribute   Marek Szyprowski
• [PATCH 3/3] ARM: dma-mapping: add support for dma_get_sgtable()   Marek Szyprowski
• [GIT PULL] CMA and ARM DMA-mapping updates for v3.5   Marek Szyprowski
• [PATCHv2 4/4] ARM: dma-mapping: remove custom consistent dma region   Marek Szyprowski
• [PATCHv2 3/4] mm: vmalloc: add VM_DMA flag to indicate areas used by dma-mapping framework   Marek Szyprowski
• [PATCHv2 3/4] mm: vmalloc: add VM_DMA flag to indicate areas used by dma-mapping framework   Marek Szyprowski
• [GIT PULL] CMA and ARM DMA-mapping updates for v3.5   Marek Szyprowski
• [PATCHv2 4/4] ARM: dma-mapping: remove custom consistent dma region   Marek Szyprowski
• [PATCH] ARM: dma-mapping: remove unconditional dependency on CMA   Marek Szyprowski
• [RFC 00/12] OMAP DMA engine conversion   T Krishnamoorthy, Balaji
• [PATCH V2 06/11] ASoC: fsl_ssi: convert to use devm_clk_get   Timur Tabi
• [PATCH 2/2] ARM: OMAP4: DSS hwmods: Add OCPIF_SWSUP_IDLE to all DSS L3 slave interfaces   Archit Taneja
• [alsa-devel] [PATCH] ASoC: fsl: fix the binding of imx-sgtl5000   Tabi Timur-B04825
• [PATCH RESEND v3 1/2] input: keyboard: Add keys driver for the LPC32xx SoC   Dmitry Torokhov
• [GIT PULL 4/8] arm-soc: clock driver changes   Linus Torvalds
• [PATCH] clk: constify parent name arrays in macros   Turquette, Mike
• COMMON_CLK_DISABLE_UNUSED   Mike Turquette
• [PATCH] clk: Fix error handling paths of all basic clock register() routines   Mike Turquette
• [PATCH 3/4] clk: add DT clock binding support   Mike Turquette
• [PATCH] clk: clk_set_rate() must fail if CLK_SET_RATE_GATE is set and clk is enabled   Mike Turquette
• [PATCH] clk: Use a separate struct for holding init data.   Mike Turquette
• [PATCH] clk: Use a separate struct for holding init data.   Mike Turquette
• [PATCH] clk: Use a separate struct for holding init data.   Mike Turquette
• [PATCH] clk: Use a separate struct for holding init data.   Mike Turquette
• [PATCH V3 2/8] clk: add a fixed factor clock   Mike Turquette
• [PATCH V3 2/8] clk: add a fixed factor clock   Mike Turquette
• [PATCH V4] clk: add a fixed factor clock   Turquette, Mike
• common clock framework   Turquette, Mike
• common clock framework   Turquette, Mike
• [PATCH 1/3] clk: always pass parent_rate into .round_rate   Turquette, Mike
• [GIT PULL] clk for next   Turquette, Mike
• common clock framework   Mike Turquette
• moving Tegra30 to the common clock framework   Mike Turquette
• [PATCH V4] clk: add a fixed factor clock   Mike Turquette
• [GIT PULL] clk for next   Turquette, Mike
• [PATCH 0/5] more clk-next fixes   Mike Turquette
• [PATCH 1/5] MAINTAINERS: add entry for common clk framework   Mike Turquette
• [PATCH 2/5] clk: prevent spurious parent rate propagation   Mike Turquette
• [PATCH 3/5] clk: remove COMMON_CLK_DISABLE_UNUSED   Mike Turquette
• [PATCH 4/5] clk: mux: assign init data   Mike Turquette
• [PATCH 5/5] clk: add a fixed factor clock   Mike Turquette
• moving Tegra30 to the common clock framework   Turquette, Mike
• [PATCH 2/5] clk: prevent spurious parent rate propagation   Turquette, Mike
• [PATCH 5/5] clk: add a fixed factor clock   Turquette, Mike
• moving Tegra30 to the common clock framework   Turquette, Mike
• common clock framework   Turquette, Mike
• [PATCH V2] clk: give clock chance to change parent at setrate stage   Turquette, Mike
• [PATCH 0/5] more clk-next fixes   Turquette, Mike
• [PATCH 0/5] more clk-next fixes   Turquette, Mike
• moving Tegra30 to the common clock framework   Turquette, Mike
• moving Tegra30 to the common clock framework   Mike Turquette
• [PATCH V2] clk: give clock chance to change parent at setrate stage   Mike Turquette
• [GIT PULL] SPEAr clk updates for v-3.5   Turquette, Mike
• moving Tegra30 to the common clock framework   Turquette, Mike
• [PATCH] clk: Constify struct clk_init_data   Turquette, Mike
• linux-next: manual merge of the akpm tree with the arm-soc tree   Turquette, Mike
• moving Tegra30 to the common clock framework   Mike Turquette
• [PATCH] clk: Constify struct clk_init_data   Turquette, Mike
• [PATCH V2] clk: give clock chance to change parent at setrate stage   Turquette, Mike
• [PATCH] clk: SPEAr600: Fix ethernet clock name for DT based probing   Turquette, Mike
• [PATCH] clk: wm831x: Add initial WM831x clock driver   Turquette, Mike
• moving Tegra30 to the common clock framework   Turquette, Mike
• [PATCH] clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate().   Turquette, Mike
• [PATCH] clk: Fix race conditions between clk_set_parent() and clk_enable()   Turquette, Mike
• [PATCH] clk: Fix race conditions between clk_set_parent() and clk_enable()   Turquette, Mike
• [PATCH] clk: SPEAr600: Fix ethernet clock name for DT based probing   Turquette, Mike
• [GIT PULL][for 3.5] clk-next update   Mike Turquette
• Clock register in early init   Turquette, Mike
• Clock register in early init   Turquette, Mike
• Clock register in early init   Turquette, Mike
• [PATCH] clk: Fix race conditions between clk_set_parent() and clk_enable()   Turquette, Mike
• common clock framework   Mike Turquette
• common clock framework   Mike Turquette
• [PATCH 1/2] clk: Add support for power of two type dividers   Mike Turquette
• Clock register in early init   Turquette, Mike
• Clock register in early init   Turquette, Mike
• [RFC PATCH 09/11] ARM: OMAP4+: thermal: introduce bandgap temperature sensor   Mike Turquette
• [PATCH 2/2] clk: Add support for rate table based dividers   Turquette, Mike
• [RFC PATCH] clk: add extension API   Mike Turquette
• [RFC PATCH] clk: add extension API   Mike Turquette
• [RFC PATCH] clk: add extension API   Mike Turquette
• [PATCH 0/3] ARM: OMAP4: register V1V8, V2V1 regulators   Peter Ujfalusi
• [PATCH 1/3] OMAP4: twl-common: Add twl6030 V1V8, V2V1 SMPS common configuration   Peter Ujfalusi
• [PATCH 2/3] OMAP: 4430SDP: Use common configuration for V1V8, V2V1 supplies   Peter Ujfalusi
• [PATCH 3/3] OMAP: omap4panda: Use common configuration for V1V8, V2V1 supplies   Peter Ujfalusi
• [PATCH v2 0/3] ARM: OMAP4: register V1V8, V2V1 regulators   Peter Ujfalusi
• [PATCH v2 1/3] OMAP4: twl-common: Add twl6030 V1V8, V2V1 SMPS common configuration   Peter Ujfalusi
• [PATCH v2 2/3] OMAP: 4430SDP: Use common configuration for V1V8, V2V1 supplies   Peter Ujfalusi
• [PATCH v2 3/3] OMAP: omap4panda: Use common configuration for V1V8, V2V1 supplies   Peter Ujfalusi
• [uClinux-dev] Running linux with mmu disabled on arm (AT91).   Greg Ungerer
• [uClinux-dev] Running linux with mmu disabled on arm (AT91).   Greg Ungerer
• [PATCH 00/02] mach-shmobile: Emma Mobile EV2 - first shot   Geert Uytterhoeven
• [PATCH V2] ARM: OMAP3+: PM: VP: ensure VP is idle before disable   Eduardo Valentin
• [PATCH V2] ARM: OMAP3+: PM: VP: ensure VP is idle before disable   Eduardo Valentin
• [PATCH V2] ARM: OMAP3+: PM: VP: ensure VP is idle before disable   Valentin, Eduardo
• [RFC PATCH 00/11] OMAP System Control Module   Eduardo Valentin
• [RFC PATCH 01/11] ARM: OMAP4: Remove un-used control module headers and defines.   Eduardo Valentin
• [RFC PATCH 02/11] ARM: OMAP: expose control.h to mach area   Eduardo Valentin
• [RFC PATCH 03/11] arm: omap: device: create a device for system control module   Eduardo Valentin
• [RFC PATCH 04/11] OMAP: Add early device for system control module   Eduardo Valentin
• [RFC PATCH 05/11] mfd: omap: control: core system control driver   Eduardo Valentin
• [RFC PATCH 06/11] OMAP2+: use control module mfd driver in omap_type   Eduardo Valentin
• [RFC PATCH 07/11] mfd: omap: control: usb-phy: introduce the ctrl-module usb driver   Eduardo Valentin
• [RFC PATCH 08/11] ARM: OMAP4+: Adding the temperature sensor register set bit fields   Eduardo Valentin
• [RFC PATCH 09/11] ARM: OMAP4+: thermal: introduce bandgap temperature sensor   Eduardo Valentin
• [RFC PATCH 10/11] omap4: thermal: add basic CPU thermal zone   Eduardo Valentin
• [RFC PATCH 11/11] ARM: DT: Add support to system control module for OMAP4   Eduardo Valentin
• [RFC PATCH 00/11] OMAP System Control Module   Eduardo Valentin
• [RFC PATCH 00/11] OMAP System Control Module   Valentin, Eduardo
• [RFC PATCH 04/11] OMAP: Add early device for system control module   Valentin, Eduardo
• [RFC PATCH 10/11] omap4: thermal: add basic CPU thermal zone   Valentin, Eduardo
• [RFC PATCH 02/11] ARM: OMAP: expose control.h to mach area   Valentin, Eduardo
• [RFC PATCH 09/11] ARM: OMAP4+: thermal: introduce bandgap temperature sensor   Eduardo Valentin
• [RFC PATCH 09/11] ARM: OMAP4+: thermal: introduce bandgap temperature sensor   Eduardo Valentin
• [RFC PATCH 09/11] ARM: OMAP4+: thermal: introduce bandgap temperature sensor   Eduardo Valentin
• [RFC PATCH 08/11] ARM: OMAP4+: Adding the temperature sensor register set bit fields   Eduardo Valentin
• [RFC PATCH 08/11] ARM: OMAP4+: Adding the temperature sensor register set bit fields   Eduardo Valentin
• [RFC PATCH 06/11] OMAP2+: use control module mfd driver in omap_type   Eduardo Valentin
• [RFC PATCH 05/11] mfd: omap: control: core system control driver   Eduardo Valentin
• [RFC PATCH 05/11] mfd: omap: control: core system control driver   Eduardo Valentin
• [RFC PATCH 03/11] arm: omap: device: create a device for system control module   Eduardo Valentin
• [RFC PATCH 11/11] ARM: DT: Add support to system control module for OMAP4   Eduardo Valentin
• [RFC PATCH 11/11] ARM: DT: Add support to system control module for OMAP4   Eduardo Valentin
• [PATCH 2/2] ARM: OMAP4: DSS hwmods: Add OCPIF_SWSUP_IDLE to all DSS L3 slave interfaces   Tomi Valkeinen
• [PATCH 0/3] ARM: OMAP2/3: DSS HWMOD fixes   Tomi Valkeinen
• [PATCH 1/3] ARM: OMAP2/3: HWMOD: Add missing flags for dispc class   Tomi Valkeinen
• [PATCH 2/3] ARM: OMAP2/3: HWMOD: Add missing flag for rfbi class   Tomi Valkeinen
• [PATCH 3/3] ARM: OMAP3: HWMOD: Add omap_hwmod_class_sysconfig for dsi   Tomi Valkeinen
• [PATCH v4] ARM: OMAP: Cleanup Beagleboard DVI reset gpio   Tomi Valkeinen
• [PATCH 0/2] OMAPDSS: write-through caching support for omapfb   Tomi Valkeinen
• [RFC PATCH 00/11 V7] MXS: Add i.MX28 USB Host driver   Marek Vasut
• [PATCH 2/2] I2C: Implement DMA support into mxs-i2c   Marek Vasut
• [PATCH 2/2] I2C: Implement DMA support into mxs-i2c   Marek Vasut
• [RFC PATCH 00/11 V7] MXS: Add i.MX28 USB Host driver   Marek Vasut
• [PATCH v2 2/5] dma: mxs-dma: make platform_device_id more generic   Marek Vasut
• [PATCH v2 2/5] dma: mxs-dma: make platform_device_id more generic   Marek Vasut
• [PATCH v2 2/5] dma: mxs-dma: make platform_device_id more generic   Marek Vasut
• [PATCH v2 2/5] dma: mxs-dma: make platform_device_id more generic   Marek Vasut
• [PATCH 1/3] ARM: mxs: add initial device tree support for imx28-evk board   Marek Vasut
• [PATCH 2/3] ARM: mxs: add initial device tree support for imx23-evk board   Marek Vasut
• [PATCH 3/3] ARM: mxs: always build in device tree support   Marek Vasut
• [PATCH 1/6] dma: mxs-dma: use global stmp_device functionality   Marek Vasut
• [PATCH 2/6] dma: mxs-dma: let dma_is_apbh and apbh_is_old take parameter   Marek Vasut
• [PATCH 3/6] dma: mxs-dma: make platform_device_id more generic   Marek Vasut
• [PATCH 4/6] dma: mxs-dma: add device tree probe support   Marek Vasut
• [PATCH 5/6] ARM: mxs: do not add dma device by default   Marek Vasut
• [PATCH 6/6] ARM: mxs: add mxs-dma dt support   Marek Vasut
• [PATCH 01/10] mmc: mxs-mmc: use global stmp_device functionality   Marek Vasut
• [PATCH 02/10] mmc: mxs-mmc: let ssp_is_old take host as parameter   Marek Vasut
• [PATCH 03/10] mmc: mxs-mmc: get rid of the use of cpu_is_xxx   Marek Vasut
• [PATCH 04/10] mmc: mxs-mmc: move header from mach into linux folder   Marek Vasut
• [PATCH 05/10] mmc: mxs-mmc: use devm_* helper to make cleanup simpler   Marek Vasut
• [PATCH 06/10] mmc: mxs-mmc: have dma_channel than dma_res in mxs_mmc_host   Marek Vasut
• [PATCH 07/10] mmc: mxs-mmc: copy wp_gpio in struct mxs_mmc_host   Marek Vasut
• [PATCH 08/10] mmc: mxs-mmc: add device tree support   Marek Vasut
• [RFC PATCH 00/11 V7] MXS: Add i.MX28 USB Host driver   Marek Vasut
• [PATCH] ARM: mach-pxa: Use REGULATOR_SUPPLY macro   Marek Vasut
• [RFC PATCH 00/11 V7] MXS: Add i.MX28 USB Host driver   Marek Vasut
• [PATCH 2/6] dma: mxs-dma: let dma_is_apbh and apbh_is_old take parameter   Marek Vasut
• [PATCH 2/6] dma: mxs-dma: let dma_is_apbh and apbh_is_old take parameter   Marek Vasut
• [RFC PATCH 00/11 V7] MXS: Add i.MX28 USB Host driver   Marek Vasut
• [PATCH 0/4] MXS: I2C improvements   Marek Vasut
• i.MX USB Re-Structure   Marek Vasut
• [PATCH 0/4] MXS: I2C improvements   Marek Vasut
• i.MX USB Re-Structure   Marek Vasut
• i.MX USB Re-Structure   Marek Vasut
• [RFC PATCH 00/11 V7] MXS: Add i.MX28 USB Host driver   Marek Vasut
• i.MX USB Re-Structure   Marek Vasut
• [RFC PATCH 0/8 V8] MXS: Add i.MX28 USB Host driver   Marek Vasut
• [PATCH 1/8] MXS: Make clk_disable return integer   Marek Vasut
• [PATCH 2/8] MXS: Add USB EHCI and USB PHY clock handling   Marek Vasut
• [PATCH 3/8] MXS: Fixup i.MX233 USB base address name   Marek Vasut
• [PATCH 4/8] MXS: Add data shared between imx-otg and EHCI driver   Marek Vasut
• [PATCH 5/8] MXS: Add USB PHY driver   Marek Vasut
• [PATCH 6/8] CI13xxx: Add i.MX233/i.MX28 binding code   Marek Vasut
• [PATCH 7/8] MXS: Add platform registration hooks for USB EHCI   Marek Vasut
• [PATCH 8/8] MXS: Enable USB on M28EVK   Marek Vasut
• [PATCH v1 1/7] usb: chipidea: permit user select USB_EHCI_ROOT_HUB_TT   Marek Vasut
• [PATCH v1 0/7] preliminary work for adding imx6q_sabrelite usb support   Marek Vasut
• [PATCH v1 0/7] preliminary work for adding imx6q_sabrelite usb support   Marek Vasut
• [PATCH 1/8] MXS: Make clk_disable return integer   Marek Vasut
• [PATCH 3/8] MXS: Fixup i.MX233 USB base address name   Marek Vasut
• [PATCH v1 1/7] usb: chipidea: permit user select USB_EHCI_ROOT_HUB_TT   Marek Vasut
• [PATCH v1 2/7] usb: chipidea: remove zero check of hw_ep_max   Marek Vasut
• [PATCH] usb: chipidea: improve the validation of endpoint count   Marek Vasut
• [PATCH v1 3/7] usb: chipidea: add imx on-soc utmi phy driver   Marek Vasut
• [PATCH v1 4/7] usb: chipidea: add imx driver binding   Marek Vasut
• [PATCH 5/8] MXS: Add USB PHY driver   Marek Vasut
• [PATCH v1 0/7] preliminary work for adding imx6q_sabrelite usb support   Marek Vasut
• [PATCH 5/8] MXS: Add USB PHY driver   Marek Vasut
• [PATCH 5/8] MXS: Add USB PHY driver   Marek Vasut
• [PATCH 5/8] MXS: Add USB PHY driver   Marek Vasut
• [PATCH 6/8] CI13xxx: Add i.MX233/i.MX28 binding code   Marek Vasut
• Issues when running DT enabled kernel on iMX28 from linux-next   Marek Vasut
• Issues when running DT enabled kernel on iMX28 from linux-next   Marek Vasut
• Issues when running DT enabled kernel on iMX28 from linux-next   Marek Vasut
• [PATCH 1/4] GPMI-NAND: Define ecc.strength   Marek Vasut
• [PATCH 2/4] GPMI-NAND: Fixup compile issue   Marek Vasut
• [PATCH 3/4] MXS-MMC: Move of_match_table out of CONFIG_PM   Marek Vasut
• [PATCH 4/4] MXS-MMC: Add wp-inverted property   Marek Vasut
• [PATCH 1/4] GPMI-NAND: Define ecc.strength   Marek Vasut
• [PATCH 4/4] MXS-MMC: Add wp-inverted property   Marek Vasut
• [PATCH 1/4] GPMI-NAND: Define ecc.strength   Marek Vasut
• [PATCH] mmc: mxs-mmc: Add wp-inverted property   Marek Vasut
• [PATCH 4/4] MXS-MMC: Add wp-inverted property   Marek Vasut
• [PATCH 1/4] GPMI-NAND: Define ecc.strength   Marek Vasut
• [PATCH 1/4] GPMI-NAND: Define ecc.strength   Marek Vasut
• [PATCH] GPMI-NAND: Define ecc.strength   Marek Vasut
• [PATCH 1/4] GPMI-NAND: Define ecc.strength   Marek Vasut
• [PATCH] mmc: mxs-mmc: Add wp-inverted property   Marek Vasut
• [PATCH 3/4] MXS-MMC: Move of_match_table out of CONFIG_PM   Marek Vasut
• [PATCH] mmc: mxs-mmc: Move of_match_table out of CONFIG_PM   Marek Vasut
• [PATCH] ARM: mxs: Let GPMI driver be built by default   Marek Vasut
• [PATCH] ARM: mxs: Let GPMI driver be built by default   Marek Vasut
• [PATCH] ARM: mxs: Let GPMI driver be built by default   Marek Vasut
• [PATCH v2 01/12] usb: otg: add notify_connect_change callback   Marek Vasut
• [PATCH 4/4] MXS-MMC: Add wp-inverted property   Marek Vasut
• [PATCH v2 01/12] usb: otg: add notify_connect_change callback   Marek Vasut
• [PATCH v2 01/12] usb: otg: add notify_connect_change callback   Marek Vasut
• [PATCH v2 00/12] add imx usb driver for mx28/6x   Marek Vasut
• [PATCH v2 00/12] add imx usb driver for mx28/6x   Marek Vasut
• [PATCH V2] GPMI-NAND: Define ecc.strength   Marek Vasut
• [PATCH] mmc: mxs-mmc: Add wp-inverted property   Marek Vasut
• [PATCH v2 07/12] ARM: imx6q: add config-on-boot gpios   Marek Vasut
• [PATCH v2 07/12] ARM: imx6q: add config-on-boot gpios   Marek Vasut
• [PATCH v2 02/12] usb: chipidea: permit driver bindings pass phy pointer   Marek Vasut
• [PATCH v2 03/12] usb: ehci-hcd: notify phy when connect change   Marek Vasut
• [PATCH v2 05/12] usb: chipidea: add imx driver binding   Marek Vasut
• [PATCH v2 06/12] ARM: imx6q: correct device name of usbphy and usb controller clock export   Marek Vasut
• [PATCH v2 08/12] ARM: imx6q: add usbphy clocks   Marek Vasut
• [PATCH v2 07/12] ARM: imx6q: add config-on-boot gpios   Marek Vasut
• [PATCH v2 08/12] ARM: imx6q: add usbphy clocks   Marek Vasut
• [PATCH v2 12/12] ARM: dts: imx28-evk: add usb devices   Marek Vasut
• [PATCH v2 07/12] ARM: imx6q: add config-on-boot gpios   Marek Vasut
• [PATCH V2] GPMI-NAND: Define ecc.strength   Marek Vasut
• [PATCH v2 02/12] usb: chipidea: permit driver bindings pass phy pointer   Marek Vasut
• [PATCH V2] GPMI-NAND: Define ecc.strength   Marek Vasut
• [PATCH v3 00/12] add imx usb driver for mx28/6x   Marek Vasut
• [PATCH 1/2] MXS: Set I2C timing registers for mxs-i2c   Marek Vasut
• [PATCH 2/2] MXS: Implement DMA support into mxs-i2c   Marek Vasut
• [PATCH] MXS: Add DT binding support into stmp3xxx-rtc   Marek Vasut
• [PATCH] MXS: Enable FLEXCAN for MXS/DT   Marek Vasut
• [PATCH] MXS: Add DENX M28 dts file   Marek Vasut
• [PATCH] MXS: Add DENX M28 dts file   Marek Vasut
• [PATCH] MXS: Add DENX M28 dts file   Marek Vasut
• [PATCH 1/2] MXS: Set I2C timing registers for mxs-i2c   Marek Vasut
• [PATCH 1/2] DRM: add Freescale i.MX LCDC driver   Daniel Vetter
• [PATCH] ARM: Fix restoration of IP scratch register when auditing syscalls   Al Viro
• [PATCH 1/9] cpu: Introduce clear_tasks_mm_cpumask() helper   Anton Vorontsov
• [PATCH] cpu: Document clear_tasks_mm_cpumask()   Anton Vorontsov
• [PATCH 3/3] ARM: MMP: add 88pm860x battery-charger support   Anton Vorontsov
• [PATCH 1/3] regulator: add pre-regulator support for 88pm860x   Anton Vorontsov
• [PATCH v2] ARM: DT: Add binding for GIC virtualization extentions (VGIC)   David Vrabel
• [PATCH v2] ARM: DT: Add binding for GIC virtualization extentions (VGIC)   David Vrabel
• linux-next: manual merge of the arm-soc tree with the mfd tree   Linus Walleij
• [PATCH v5 1/1] dt: add of_get_child_count helper function   Linus Walleij
• [PATCH v4 2/4] pinctrl: pinctrl-imx: add imx pinctrl core driver   Linus Walleij
• [PATCH v4 4/4] mmc: sdhci-imx-esdhc: convert to use pinctrl subsystem   Linus Walleij
• [PATCH v2] pinctrl: add pinctrl-mxs support   Linus Walleij
• [GIT PULL] ux500-core for ARM SoC   Linus Walleij
• [PATCH 7.2/15] ARM: ux500: Disable SMSC911x platform code registration when DT is enabled   Linus Walleij
• [PATCH 04/15] drivers/net: Do not free an IRQ if its request failed   Linus Walleij
• Making ARM multiplatform kernels DT-only?   Linus Walleij
• [PATCH 15/15] ARM: ux500: use machine specific hook for late init   Linus Walleij
• [RFC 4/5] pinctrl: SPEAr: Add gpio ranges support   Linus Walleij
• [RFC 0/5] pinctrl: SPEAr Updates   Linus Walleij
• [PATCH] gpiolib: Add of_get_gpio_chip_by_phandle() helper   Linus Walleij
• [PATCH] gpiolib: Add of_get_gpio_chip_by_phandle() helper   Linus Walleij
• [PATCH V2 0/5] pinctrl: SPEAr Updates   Linus Walleij
• [PATCH 00/12] pinctrl for Ux500 and Nomadik family   Linus Walleij
• [PATCH 01/12] gpio: move the Nomadik GPIO driver to pinctrl   Linus Walleij
• [PATCH 02/12] pinctrl: basic Nomadik pinctrl interface   Linus Walleij
• [PATCH 03/12] pinctrl/nomadik: break out single GPIO debug function   Linus Walleij
• [PATCH 04/12] pinctrl/nomadik: reuse GPIO debug function for pins   Linus Walleij
• [PATCH 05/12] pinctrl/nomadik: implement pin multiplexing   Linus Walleij
• [PATCH 06/12] pinctrl/nomadik: implement pin configuration   Linus Walleij
• [PATCH 07/12] pinctrl: add sleep state definition   Linus Walleij
• [PATCH 08/12] ARM: ux500: switch over to Nomadik pinctrl driver   Linus Walleij
• [PATCH 09/12] ARM: ux500: delete custom pin control system   Linus Walleij
• [PATCH 10/12] ARM: ux500: switch to using pinctrl for uart0   Linus Walleij
• [PATCH 11/12] ARM: ux500: alter MSP registration to return a device pointer   Linus Walleij
• [PATCH 12/12] ARM: ux500: switch MSP to using pinctrl for pins   Linus Walleij
• smp_twd fix for adapting to cpu frequency change   Linus Walleij
• [PATCH 1/2] clockevents: add an optional frequency update function   Linus Walleij
• [PATCH 2/2] ARM: smp_twd: use the .update_freq() for periodic mode   Linus Walleij
• [PATCH 0/4] Add device tree support for gpio-mxs   Linus Walleij
• Handling of modular boards   Linus Walleij
• Handling of modular boards   Linus Walleij
• [PATCH 01/15] i2c/busses: Add Device Tree support to the Nomadik I2C driver   Linus Walleij
• [PATCH 02/15] ARM: ux500: Remove unused i2c platform_data initialisation code   Linus Walleij
• [PATCH 03/15] ARM: ux500: Provide auxdata to be used as name base clock search for nmk-i2c   Linus Walleij
• [PATCH 04/15] ARM: ux500: CONFIG: Compile in support for leds-gpio   Linus Walleij
• [PATCH 05/15] ARM: ux500: Enable the user LED on Snowball via Device Tree   Linus Walleij
• [PATCH 07/15] drivers/power: Carry out platform_data error checking on ab8500 devices   Linus Walleij
• [PATCH 08/15] ARM: ux500: PRCMU related configuration and layout corrections for Device Tree   Linus Walleij
• [PATCH 09/15] drivers/mfd: Enable Device Tree support for the db8500-prcmu   Linus Walleij
• [PATCH 10/15] drivers/mfd: db8500-prcmu: Add support for regulator supply for nmk-i2c.4   Linus Walleij
• [PATCH 11/15] drivers/mfd: Enable Device Tree for ab8500-core driver   Linus Walleij
• [PATCH 13/15] ARM: ux500: Add support for ab8500 regulators into the Device Tree   Linus Walleij
• [PATCH 15/15] ARM: ux500: Disable platform setup of the ab8500 when DT is enabled   Linus Walleij
• [PATCH] pinctrl: Add generic pinctrl-simple driver that supports omap2+ padconf   Linus Walleij
• [PATCH 1/3] ARM: imx: enable pinctrl dummy states   Linus Walleij
• Cyclic DMA - callback properties and tx_status residue   Linus Walleij
• [PATCH] gpiolib: Add of_get_gpio_chip_by_phandle() helper   Linus Walleij
• [RFC 4/5] pinctrl: SPEAr: Add gpio ranges support   Linus Walleij
• [PATCH 06/15] mfd/ab8500: Remove confusing ab8500-i2c file and merge into ab8500-core   Linus Walleij
• ARM: ux500: !CONFIG_OF build error drivers/gpio/gpio-nomadik.c   Linus Walleij
• [PATCH V3 0/5] pinctrl: SPEAr Updates   Linus Walleij
• [PATCH 02/15] ARM: ux500: Remove unused i2c platform_data initialisation code   Linus Walleij
• [PATCH 04/15] ARM: ux500: CONFIG: Compile in support for leds-gpio   Linus Walleij
• [PATCH 08/15] ARM: ux500: PRCMU related configuration and layout corrections for Device Tree   Linus Walleij
• ARM: ux500: !CONFIG_OF build error drivers/gpio/gpio-nomadik.c   Linus Walleij
• [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support   Linus Walleij
• [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support   Linus Walleij
• [PATCH 11/15] drivers/mfd: Enable Device Tree for ab8500-core driver   Linus Walleij
• [PATCH] ARM: ux500: Add audio-related platform-data   Linus Walleij
• [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support   Linus Walleij
• [PATCH 02/12] pinctrl: basic Nomadik pinctrl interface   Linus Walleij
• [PATCH 02/12] pinctrl: basic Nomadik pinctrl interface   Linus Walleij
• [PATCH 02/12] pinctrl: basic Nomadik pinctrl interface   Linus Walleij
• [PATCH 02/12 v2] pinctrl: basic Nomadik pinctrl interface   Linus Walleij
• [PATCH 06/12] pinctrl/nomadik: implement pin configuration   Linus Walleij
• [PATCH 06/12 v2] pinctrl/nomadik: implement pin configuration   Linus Walleij
• [PATCH 07/12 v2] pinctrl: add sleep state definition   Linus Walleij
• [PATCH 12/12] ARM: ux500: switch MSP to using pinctrl for pins   Linus Walleij
• [PATCH] RFC: ARM: msm: re-read DMA IRQ status on each iteration   Linus Walleij
• Cyclic DMA - callback properties and tx_status residue   Linus Walleij
• [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support   Linus Walleij
• smp_twd fix for adapting to cpu frequency change   Linus Walleij
• [PATCH 4/7] drivers/gpio: gpio-nomadik: Provide documentation for Device Tree bindings   Linus Walleij
• [PATCH] ARM: integrator: fix typo in PCI swizzle function   Linus Walleij
• [PATCH] ARM: integrator: fix typo in PCI swizzle function   Linus Walleij
• [PATCH] pinctrl: Add generic pinctrl-simple driver that supports omap2+ padconf   Linus Walleij
• [GIT PULL] SPEAr pinctrl updates for v-3.5   Linus Walleij
• [PATCH 1/2] pinctrl: mxs: create group for pin config node   Linus Walleij
• [PATCH 2/2] pinctrl: mxs: skip gpio nodes for group creation   Linus Walleij
• [PATCH 06/15] mfd/ab8500: Remove confusing ab8500-i2c file and merge into ab8500-core   Linus Walleij
• CSR SiRFSoC PRIMA2: SPI compilation broken in 3.4-rc7   Linus Walleij
• [PATCH 1/5] pinctrl: a minor error checking improvement for pinconf   Linus Walleij
• [PATCH 2/5] pinctrl: make pinmux disable function optional   Linus Walleij
• [PATCH 3/5] pinctrl: pinctrl-imx: remove empty pinmux disable function   Linus Walleij
• [PATCH 4/5] pinctrl: pinctrl-mxs: remove empty pinmux disable function   Linus Walleij
• [PATCH 5/5] pinctrl: pinctrl-pxa3xx: remove empty pinmux disable function   Linus Walleij
• [PATCH] SPI: PRIMA2: use the newest APIs of PINCTRL to fix compiling errors   Linus Walleij
• [PATCH] ARM: PRIMA2: select PINCTRL and PINCTRL_SIRF in Kconfig   Linus Walleij
• [PATCH 1/2] pinctrl: pinctrl-imx: add imx53 pinctrl driver   Linus Walleij
• [PATCH 00/12] pinctrl for Ux500 and Nomadik family   Linus Walleij
• [PATCH 1/2] pinctrl: pinctrl-imx: add imx53 pinctrl driver   Linus Walleij
• [PATCH 00/12] pinctrl for Ux500 and Nomadik family   Linus Walleij
• [PATCH 1/2] pinctrl: pinctrl-imx: add imx53 pinctrl driver   Linus Walleij
• [PATCH 1/2] pinctrl: pinctrl-imx: add imx53 pinctrl driver   Linus Walleij
• [PATCH] pinctrl: Add generic pinctrl-simple driver that supports omap2+ padconf   Linus Walleij
• [PATCH] clk: Fix race conditions between clk_set_parent() and clk_enable()   Linus Walleij
• [PATCH 7.2/15] ARM: ux500: Disable SMSC911x platform code registration when DT is enabled   Linus Walleij
• [PATCH 1/2] pinctrl: pinctrl-imx: add imx53 pinctrl driver   Linus Walleij
• [PATCH 7.2/15] ARM: ux500: Disable SMSC911x platform code registration when DT is enabled   Linus Walleij
• [PATCH 1/2] pinctrl: pinctrl-imx: add imx53 pinctrl driver   Linus Walleij
• [PATCH] [SPI] Refactor spi-orion to use SPI framework queue.   Linus Walleij
• [RFC] pl08x: don't use dma_slave_config direction argument   Linus Walleij
• [PATCH] RFC: ARM: cache-l2x0: update workaround for PL310 errata 727915   Linus Walleij
• [PATCH v2] RFC: ARM: cache-l2x0: update workaround for PL310 errata 727915   Linus Walleij
• [GIT PULL] SPEAr pinctrl updates for v-3.5   Linus Walleij
• [PATCH 01/18] i2c: Add Device Tree support to the Nomadik I2C driver   Linus Walleij
• [PATCH 06/18] mfd: ab8500: Remove confusing ab8500-i2c file and merge into ab8500-core   Linus Walleij
• [PATCH 13/18] ARM: ux500: Apply ab8500-debug node do the db8500 DT structure   Linus Walleij
• [PATCH 14/18] mfd: Enable ab8500-debug when Device Tree is enabled   Linus Walleij
• [PATCH 16/18] ARM: ux500: Add a ab8500-gpadc node to the db8500 Device Tree   Linus Walleij
• [PATCH 15/18] mfd: Prevent unassigned pointer from being used in ab8500-gpadc driver   Linus Walleij
• [PATCH 17/18] mfd: Enable ab8500-gpadc driver for Device Tree   Linus Walleij
• [PATCH 18/18] ARM: ux500: Add support for input/ponkey into the db8500's Device Tree   Linus Walleij
• [PATCH 11/18] regulator: Enable the ab8500 for Device Tree   Linus Walleij
• [PATCH 09/18] regulator: ab8500: Split up probe() into manageable pieces   Linus Walleij
• [PATCH 05/16] regulator: db8500-prcmu: Separate regulator registration from probe   Linus Walleij
• [PATCH 07/16] regulator: Enable Device Tree for the db8500-prcmu regulator driver   Linus Walleij
• [RFC] pl08x: don't use dma_slave_config direction argument   Linus Walleij
• [RFC] pl08x: don't use dma_slave_config direction argument   Linus Walleij
• [RFC] pl08x: don't use dma_slave_config direction argument   Linus Walleij
• [RFC] pl08x: don't use dma_slave_config direction argument   Linus Walleij
• [PATCH v2] RFC: ARM: cache-l2x0: update workaround for PL310 errata 727915   Linus Walleij
• [GIT PULL] pin control changes for v3.5   Linus Walleij
• [PATCH 1/6] DMA: PL08x: move private data structures into amba-pl08x.c   Linus Walleij
• [PATCH 2/9] serial: amba-pl011: adopt pinctrl support   Linus Walleij
• [PATCH 01/16] Input: Add Device Tree support to the ab8500-ponkey driver   Linus Walleij
• [PATCH 02/16] ARM: ux500: Enable LED heartbeat functionality on Snowball   Linus Walleij
• [PATCH 03/16] ARM: ux500: Enable LED heartbeat functionality on Snowbal via DT   Linus Walleij
• [PATCH 04/16] ARM: ux500: Only initialise STE's UIBs on boards which support them   Linus Walleij
• [PATCH 06/16] ARM: ux500: Apply db8500-prcmu regulator information to db8500 Device Tree   Linus Walleij
• [PATCH 08/16] ARM: ux500: Allow PRCMU regulator to be probed during a DT enabled boot   Linus Walleij
• [PATCH 09/16] ARM: ux500: Provide regulator support for SMSC911x via Device Tree   Linus Walleij
• [PATCH 10/16] ARM: ux500: Add db8500 Device Tree node for ab8500-sysctrl   Linus Walleij
• [PATCH 12/16] ARM: ux500: Add db8500 Device Tree node for misc/ab8500-pwm   Linus Walleij
• [PATCH 14/16] ARM: ux500: Add a ab8500-usb Device Tree node for db8500 based devices   Linus Walleij
• [PATCH 15/16] ARM: ux500: Add regulator support for nomadik-i2c into the db8500 Device Tree   Linus Walleij
• [PATCH 16/16] ARM: ux500: Re-enable SMSC911x platform code registration during non-DT boots   Linus Walleij
• [PATCH v2] RFC: ARM: cache-l2x0: update workaround for PL310 errata 727915   Linus Walleij
• [PATCH] serial/amba-pl011: move custom pin control to driver   Linus Walleij
• [PATCH RFC v2 1/2] pinctrl: add pinctrl_add_gpio_ranges function   Linus Walleij
• [PATCH] pinctrl: sirf: mark of_device_id match table as __devinitconst   Linus Walleij
• [PATCH] PINCTRL: SiRF: add CSR SiRFprimaII GPIO driver depending on pinmux APIs   Linus Walleij
• [PATCH RFC v2 1/2] pinctrl: add pinctrl_add_gpio_ranges function   Linus Walleij
• [PATCH RFC v3 2/3] pinctrl: add pinctrl_add_gpio_ranges function   Linus Walleij
• [PATCH V2 0/1] dmaengine/amba-pl08x: Add support for s3c64xx DMAC   Linus Walleij
• [PATCH] PINCTRL: SiRF: add CSR SiRFprimaII GPIO driver depending on pinmux APIs   Linus Walleij
• [PATCH] PINCTRL: SiRF: add CSR SiRFprimaII GPIO driver depending on pinmux APIs   Linus Walleij
• [PATCH 06/16] ARM: ux500: Apply db8500-prcmu regulator information to db8500 Device Tree   Linus Walleij
• [PATCH 15/16] ARM: ux500: Add regulator support for nomadik-i2c into the db8500 Device Tree   Linus Walleij
• [PATCH 16/16] ARM: ux500: Re-enable SMSC911x platform code registration during non-DT boots   Linus Walleij
• [PATCH 05/15] ARM: ux500: New DT:ed snowball_platform_devs for one-by-one device enablement   Linus Walleij
• [PATCH 15/16] ARM: ux500: Add regulator support for nomadik-i2c into the db8500 Device Tree   Linus Walleij
• [PATCH 15/16] ARM: ux500: Add regulator support for nomadik-i2c into the db8500 Device Tree   Linus Walleij
• [PATCH 04/22] ARM: ux500: Remove DB8500 PRCMU platform registration when DT is enabled   Linus Walleij
• [PATCH 08/22] regulator: Change ab8500 match names to reflect Device Tree   Linus Walleij
• [PATCH 09/22] regulator: Change db8500-prcmu match names to reflect Device Tree   Linus Walleij
• [PATCH 14/22] ARM: ux500: Provide regulator support for SMSC911x via Device Tree   Linus Walleij
• [PATCH 16/22] mfd: ab8500-gpadc: Enable IRQF_ONESHOT when requesting a threaded IRQ   Linus Walleij
• [rtc-linux] [PATCH 17/22] rtc: ab8500-rtc: IRQF_ONESHOT when requesting a threaded IRQ   Linus Walleij
• [PATCH 18/22] mfd: Remove redundant Kconfig entry   Linus Walleij
• [PATCH 19/22] net/smsc911x: Repair broken failure paths   Linus Walleij
• [PATCH 20/22] pinctrl-nomadik: Allow Device Tree driver probing   Linus Walleij
• [PATCH 21/22] ARM: ux500: Enable probing of pinctrl through Device Tree   Linus Walleij
• [PATCH 22/22] mfd: Enable DT probing of the DB8500 PRCMU   Linus Walleij
• [PATCH 18/22] mfd: Remove redundant Kconfig entry   Linus Walleij
• [RFC 02/34] dmaengine: virt-dma: vchan_find_desc()   Linus Walleij
• [RFC 03/34] dmaengine: virt-dma: add support for cyclic DMA periodic callbacks   Linus Walleij
• [RFC 04/34] dmaengine: PL08x: remove runtime PM support   Linus Walleij
• [RFC 05/34] dmaengine: PL08x: fix missed dma_transfer_direction fixup   Linus Walleij
• [RFC 06/34] dmaengine: PL08x: remove redundant spinlock   Linus Walleij
• [RFC 07/34] dmaengine: PL08x: remove circular_buffer boolean from channel data   Linus Walleij
• [RFC 08/34] dmaengine: PL08x: clean up get_signal/put_signal   Linus Walleij
• [RFC 09/34] dmaengine: PL08x: move private data structures into amba-pl08x.c   Linus Walleij
• [RFC 10/34] dmaengine: PL08x: constify channel names and bus_id strings   Linus Walleij
• [RFC 11/34] dmaengine: PL08x: get src/dst addr direct from dma_slave_config struct   Linus Walleij
• [RFC 12/34] dmaengine: PL08x: get rid of device_fc in struct pl08x_dma_chan   Linus Walleij
• [RFC 13/34] dmaengine: PL08x: move the bus and increment selection to dma prepare function   Linus Walleij
• [RFC 14/34] dmaengine: PL08x: extract function to to generate cctl values   Linus Walleij
• [RFC 15/34] dmaengine: PL08x: ignore 'direction' argument in dma_slave_config   Linus Walleij
• [RFC 16/34] dmaengine: PL08x: get rid of unnecessary checks in dma_slave_config   Linus Walleij
• [RFC 17/34] dmaengine: PL08x: split DMA signal muxing from channel alloc   Linus Walleij
• [RFC 18/34] dmaengine: PL08x: move DMA signal muxing into pl08x_dma_chan struct   Linus Walleij
• [RFC 19/34] dmaengine: PL08x: track mux usage on a per-channel basis.   Linus Walleij
• [RFC 20/34] dmaengine: PL08x: convert to a list of completed descriptors   Linus Walleij
• [RFC 21/34] dmaengine: PL08x: move DMA signal muxing into slave prepare code   Linus Walleij
• [RFC 22/34] dmaengine: PL08x: remove waiting descriptor pointer   Linus Walleij
• [RFC 23/34] dmaengine: PL08x: re-jig the starting of txds   Linus Walleij
• [RFC 24/34] dmaengine: PL08x: split the pend_list in two   Linus Walleij
• [RFC 25/34] dmaengine: PL08x: start next descriptor from irq context   Linus Walleij
• [RFC 26/34] dmaengine: PL08x: rejig physical channel allocation   Linus Walleij
• [RFC 27/34] dmaengine: PL08x: convert to use virt-dma structs   Linus Walleij
• [RFC 28/34] dmaengine: PL08x: use vchan's spinlock   Linus Walleij
• [RFC 29/34] dmaengine: PL08x: convert to use vchan submitted/issued lists   Linus Walleij
• [RFC 30/34] dmaengine: PL08x: convert to use vchan done list   Linus Walleij
• [RFC 31/34] dmaengine: PL08x: fix tx_status function to return correct residue   Linus Walleij
• [RFC 32/34] dmaengine: PL08x: get rid of pl08x_prep_channel_resources   Linus Walleij
• [RFC 33/34] dmaengine: PL08x: get rid of write only pool_ctr and free_txd locking   Linus Walleij
• [RFC 34/34] dmaengine: PL08x: ensure all descriptors are freed when channel is released   Linus Walleij
• [RFC 03/34] dmaengine: virt-dma: add support for cyclic DMA periodic callbacks   Linus Walleij
• [PATCH 08/22] regulator: Change ab8500 match names to reflect Device Tree   Linus Walleij
• [PATCH RFC 1/3] i2c-nomadik: move header from <plat/i2c.h> to <linux/i2c-nomadik.h>   Linus Walleij
• [PATCH RFC 2/3] i2c-nomadik: turn the platform driver to an amba driver   Linus Walleij
• [PATCH RFC 0/3] i2c-nomadik changes   Linus Walleij
• [PATCH RFC 2/3] i2c-nomadik: turn the platform driver to an amba driver   Linus Walleij
• [PATCH 1/3] pinctrl: add samsung pinctrl and gpiolib driver   Linus Walleij
• [PATCH 2/3] pinctrl: add exynos4210 specific driver data for samsung pinctrl driver   Linus Walleij
• [PATCH 0/3] pinctrl: add support for samsung pinctrl driver   Linus Walleij
• [PATCH RFC 2/3] i2c-nomadik: turn the platform driver to an amba driver   Linus Walleij
• [PATCH 1/1] [RESEND] ARM: OMAP3+: dpll: Configure autoidle mode only if it's supported   Paul Walmsley
• [PATCH] ARM: OMAP3: Fix CM register bit masks   Paul Walmsley
• [PATCH] W1: OMAP HDQ1W: allow driver to be built on all OMAP2+   Paul Walmsley
• [PATCH 0/3] ARM: OMAP3: clock: cleanup AM35xx clock flags   Paul Walmsley
• [PATCH-V4 0/4] ARM: OMAP2+: Add voltagedomain, powerdomain & PRM support for AM33XX device   Paul Walmsley
• [PATCH-V5 2/3] arm:omap:am33xx: Add AM335XEVM machine support   Paul Walmsley
• [PATCH-V4 0/4] ARM: OMAP2+: Add voltagedomain, powerdomain & PRM support for AM33XX device   Paul Walmsley
• [PATCH 4/7] ARM: OMAP2: Add MMC hwmod data for 2420   Paul Walmsley
• [PATCH 4/7] ARM: OMAP2: Add MMC hwmod data for 2420   Paul Walmsley
• [PATCH] ARM: OMAP2+: watchdog: fix !PM boot crash, disarm timer after hwmod reset   Paul Walmsley
• [PATCH 2/2] ARM: OMAP4: DSS hwmods: Add OCPIF_SWSUP_IDLE to all DSS L3 slave interfaces   Paul Walmsley
• [PATCH v4 13/39] ARM: OMAP3: hwmod data: add gpmc   Paul Walmsley
• [PATCH v4 14/39] ARM: OMAP2xxx: hwmod data: add gpmc   Paul Walmsley
• [PATCH 1/6] ARM: OMAP2+: PM: protect the power domain state change by a mutex   Paul Walmsley
• [PATCH 2/6] ARM: OMAP2+: PM: introduce power domains functional states   Paul Walmsley
• [PATCH 02/13] ARM: OMAP5: Add minimal support for OMAP5430 SOC   Paul Walmsley
• Broken UART I/O wakeups on v3.4-rc4+   Paul Walmsley
• [PATCH 1/7] ARM: OMAP4: Don't compile cm2xxx_3xxx.c for OMAP4 only builds.   Paul Walmsley
• [PATCH 7/7] ARM: OMAP4+: Add prm and cm base init function.   Paul Walmsley
• [PATCH 02/13] ARM: OMAP5: Add minimal support for OMAP5430 SOC   Paul Walmsley
• [PATCH 02/13] ARM: OMAP5: Add minimal support for OMAP5430 SOC   Paul Walmsley
• [PATCH] ARM: OMAP2/3: hwmod data: add gpmc   Paul Walmsley
• Broken UART I/O wakeups on v3.4-rc4+   Paul Walmsley
• [GIT PULL] ARM: OMAP2+: PRCM: first set of updates for v3.5 (fwd)   Paul Walmsley
• oprofile and ARM A9 hardware counter   Paul Walmsley
• [PATCH 4/7] ARM: OMAP2: Add MMC hwmod data for 2420   Paul Walmsley
• [GIT PULL] ARM: OMAP2+: some hwmod data additions for 3.5   Paul Walmsley
• [PATCH 5/7] ARM: OMAP2: Use hwmod to initialize mmc for 2420   Paul Walmsley
• [PATCH 5/7] ARM: OMAP2: Use hwmod to initialize mmc for 2420   Paul Walmsley
• [PATCH] ARM: OMAP: OTG integration: fix compiler warning   Paul Walmsley
• [GIT PULL] ARM: OMAP3+: PRM/hwmod: fix and improve I/O chain wakeup support   Paul Walmsley
• [PATCH 0/3] ARM: OMAP: AM35xx: fix some boot warnings with AM3505/3517   Paul Walmsley
• [PATCH 1/3] ARM: OMAP AM35xx: clock and hwmod data: fix AM35xx HSOTGUSB hwmod   Paul Walmsley
• [PATCH 2/3] ARM: OMAP AM35xx: clock and hwmod data: fix UART4 data   Paul Walmsley
• [PATCH 3/3] ARM: OMAP: AM35xx: fix UART4 softreset   Paul Walmsley
• [PATCH 2/4] ARM: OMAP2+: Move the stubbed prm and cm functions to prcm.c file and make them __weak.   Paul Walmsley
• [PATCH 0/3] ARM: OMAP: AM35xx: fix some boot warnings with AM3505/3517   Paul Walmsley
• [PATCH-V7 0/3] ARM: OMAP: Make OMAP clocksource source selection runtime   Paul Walmsley
• [PATCH] ARM: OMAP1: USB: fix ocpi_enable compile problem on non-1610 builds   Paul Walmsley
• [PATCH-V7 0/3] ARM: OMAP: Make OMAP clocksource source selection runtime   Paul Walmsley
• [PATCH-V2 4/4] ARM: OMAP2+: CLEANUP: Add new config option for different DPLL features   Paul Walmsley
• [PATCH-V2 2/4] ARM: OMAP2+: CLEANUP: Move omap3 dpll ops to dpll3xxx.c   Paul Walmsley
• [GIT PULL 1/10] omap non-critical fixes for v3.5 merge window   Paul Walmsley
• [PATCH 3/3] ARM: OMAP: AM35xx: fix UART4 softreset   Paul Walmsley
• [PATCH 3/3] ARM: OMAP: AM35xx: fix UART4 softreset   Paul Walmsley
• [PATCH 3/3] ARM: OMAP: AM35xx: fix UART4 softreset   Paul Walmsley
• [PATCHv2 14/19] ARM: OMAP4: wakeupgen: enable clocks for save_secure_all   Paul Walmsley
• [PATCH 0/3] OMAP: control: bootaddr and bootmod APIs   Paul Walmsley
• [PATCH 0/6] ARM: OMAP AM33xx: PRM/CM support for 3.6   Paul Walmsley
• [PATCH 1/6] ARM: OMAP2+: control: Add AM33XX control reg & sec clkctrl offset   Paul Walmsley
• [PATCH 2/6] ARM: OMAP AM33xx: voltagedomain: Add voltage domain data   Paul Walmsley
• [PATCH 3/6] ARM: OMAP AM33xx: PRM: add PRM support   Paul Walmsley
• [PATCH 4/6] ARM: OMAP AM33xx: CM: Introduce AM33xx CM APIs and register level details   Paul Walmsley
• [PATCH 5/6] ARM: OMAP AM33xx: powerdomains: add AM335x support   Paul Walmsley
• [PATCH 6/6] ARM: OMAP AM33xx: clockdomains: Add clockdomain data and respective operations   Paul Walmsley
• [PATCH-V3 3/3] ARM: OMAP3+: clock33xx: Add AM33XX clock tree data   Paul Walmsley
• [PATCH-V3 3/3] ARM: OMAP3+: clock33xx: Add AM33XX clock tree data   Paul Walmsley
• [PATCH] ARM: OMAP: PM: Lock clocks list while generating summary   Paul Walmsley
• [PATCH] ARM: OMAP3+: dpll: optimize noncore dpll locking logic   Paul Walmsley
• [PATCH] ARM: OMAP3+: dpll: optimize noncore dpll locking logic   Paul Walmsley
• [PATCH] OMAP4+: hwmod: fix issue causing IPs not going back to Smart-Standby   Paul Walmsley
• [PATCH 0/4] omap legacy full speed usb cleanup for v3.6   Paul Walmsley
• [PATCH-V3 3/3] ARM: OMAP3+: clock33xx: Add AM33XX clock tree data   Paul Walmsley
• [PATCH] ARM: OMAP2+: hwmod code/data: fix 32K sync timer   Paul Walmsley
• [PATCH 0/2] ARM: SMP: Fix cpu hotplug problems   Hui Wang
• [PATCH 1/2] ARM: SMP: move mm_cpumask clearing to the __cpu_die()   Hui Wang
• [PATCH 2/2] ARM: SMP: use per cpu state to replace   Hui Wang
• [PATCH 2/2] ARM: SMP: use per cpu state to replace   Hui Wang
• [PATCH] ARM: move read_{boot, persistent}_clock to the architecture level   Stephen Warren
• [PATCH v2] pinctrl: add pinctrl-mxs support   Stephen Warren
• [PATCH] gpiolib: Add of_get_gpio_chip_by_phandle() helper   Stephen Warren
• [PATCH 14/15] ARM: tegra: use machine specific hook for late init   Stephen Warren
• [PATCH] gpiolib: Add of_get_gpio_chip_by_phandle() helper   Stephen Warren
• [PATCH 1/3] ARM: tegra: trimslice: enable PCIe when booting from device tree   Stephen Warren
• [PATCH 2/3] ARM: tegra: harmony: init regulators, PCIe when booting from DT   Stephen Warren
• [PATCH 3/3] ARM: tegra: paz00: enable WiFi rfkill when booting from device tree   Stephen Warren
• [PATCHv3 1/4] ARM: tegra: Add Tegra AHB driver   Stephen Warren
• [PATCHv3 2/4] ARM: tegra: Add SMMU enabler in AHB   Stephen Warren
• [PATCHv3 3/4] iommu/tegra: smmu: Refrain from accessing to AHB   Stephen Warren
• [PATCHv3 4/4] ARM: dt: tegra: Add device tree support for AHB   Stephen Warren
• [PATCHv3 3/4] iommu/tegra: smmu: Refrain from accessing to AHB   Stephen Warren
• [PATCHv3 1/4] ARM: tegra: Add Tegra AHB driver   Stephen Warren
• [PATCH 1/1] ARM: tegra: Add Tegra Memory Controller(MC) driver   Stephen Warren
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Stephen Warren
• [PATCH] pinctrl: Add generic pinctrl-simple driver that supports omap2+ padconf   Stephen Warren
• Stable I2C branch needed as a dependency for Tegra change   Stephen Warren
• [PATCHv3 1/4] ARM: tegra: Add Tegra AHB driver   Stephen Warren
• [PATCHv3 1/4] ARM: tegra: Add Tegra AHB driver   Stephen Warren
• [PATCHv3 3/4] iommu/tegra: smmu: Refrain from accessing to AHB   Stephen Warren
• [PATCH 1/1] ARM: tegra: Add Tegra Memory Controller(MC) driver   Stephen Warren
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Stephen Warren
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Stephen Warren
• [PATCH] pinctrl: Add generic pinctrl-simple driver that supports omap2+ padconf   Stephen Warren
• [PATCH] pinctrl: Add generic pinctrl-simple driver that supports omap2+ padconf   Stephen Warren
• Handling of modular boards   Stephen Warren
• Handling of modular boards   Stephen Warren
• Handling of modular boards   Stephen Warren
• moving Tegra30 to the common clock framework   Stephen Warren
• [PATCHv5 1/3] ARM: tegra: Add Tegra AHB driver   Stephen Warren
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Stephen Warren
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Stephen Warren
• [GIT PULL] ARM: tegra: cleanup branch   Stephen Warren
• [GIT PULL] ARM: tegra: fixes branch   Stephen Warren
• [GIT PULL] ARM: tegra: gpio-pinmux branch   Stephen Warren
• [GIT PULL] ARM: tegra: usb-ulpi branch   Stephen Warren
• [GIT PULL] ARM: tegra: tegra30-audio branch   Stephen Warren
• [GIT PULL] ARM: tegra: dt branch   Stephen Warren
• [GIT PULL] ARM: tegra: debug branch   Stephen Warren
• [GIT PULL] ARM: tegra defconfig branch   Stephen Warren
• [PATCHv5 1/3] ARM: tegra: Add Tegra AHB driver   Stephen Warren
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Stephen Warren
• [PATCH] pinctrl: Add generic pinctrl-simple driver that supports omap2+ padconf   Stephen Warren
• [PATCH] pinctrl: Add generic pinctrl-simple driver that supports omap2+ padconf   Stephen Warren
• [PATCH] pinctrl: Add generic pinctrl-simple driver that supports omap2+ padconf   Stephen Warren
• [PATCH 02/12] pinctrl: basic Nomadik pinctrl interface   Stephen Warren
• [PATCH 06/12] pinctrl/nomadik: implement pin configuration   Stephen Warren
• [PATCH 07/12] pinctrl: add sleep state definition   Stephen Warren
• [PATCH 12/12] ARM: ux500: switch MSP to using pinctrl for pins   Stephen Warren
• [alsa-devel] [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support   Stephen Warren
• [RFC 1/1] Driver Core: don't oops with unregistered driver in driver_find_device()   Stephen Warren
• Handling of modular boards   Stephen Warren
• Handling of modular boards   Stephen Warren
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Stephen Warren
• [PATCH] pinctrl: Add generic pinctrl-simple driver that supports omap2+ padconf   Stephen Warren
• [PATCH 1/4] ARM: tegra20: Add Tegra Memory Controller(MC) driver   Stephen Warren
• [RFC 1/1] Driver Core: don't oops with unregistered driver in driver_find_device()   Stephen Warren
• [RFC 1/1] Driver Core: don't oops with unregistered driver in driver_find_device()   Stephen Warren
• [PATCH 1/3] ARM: tegra20: Make MC optional in Kconfig   Stephen Warren
• [PATCH] pinctrl: Add generic pinctrl-simple driver that supports omap2+ padconf   Stephen Warren
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Stephen Warren
• [PATCH 07/12 v2] pinctrl: add sleep state definition   Stephen Warren
• [PATCH] pinctrl: Add generic pinctrl-simple driver that supports omap2+ padconf   Stephen Warren
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Stephen Warren
• [PATCH] ARM: dt: tegra cardhu: fix typo in SDHCI node name   Stephen Warren
• [PATCH 0/9] ARM: dt: tegra: cleanup pass   Stephen Warren
• [PATCH 1/9] ARM: dt: tegra: whitespace cleanup   Stephen Warren
• [PATCH 2/9] ARM: dt: tegra: remove unnecessary unit addresses   Stephen Warren
• [PATCH 3/9] ARM: dt: tegra: gpio comment cleanup   Stephen Warren
• [PATCH 4/9] ARM: dt: tegra: format regs properties consistently   Stephen Warren
• [PATCH 5/9] ARM: dt: tegra: consistenly use lower-case for hex constants   Stephen Warren
• [PATCH 6/9] ARM: dt: tegra: remove duplicate device_type property   Stephen Warren
• [PATCH 7/9] ARM: dt: tegra: sort nodes based on bus order   Stephen Warren
• [PATCH 8/9] ARM: dt: tegra: consistent basic property ordering   Stephen Warren
• [PATCH 9/9] ARM: dt: tegra: invert status=disable vs status=okay   Stephen Warren
• Stable I2C branch needed as a dependency for Tegra change   Stephen Warren
• moving Tegra30 to the common clock framework   Stephen Warren
• [PATCH] ARM: tegra: Fix flow controller accesses   Stephen Warren
• [GIT PULL] ARM: tegra: Fix for 3.4   Stephen Warren
• [GIT PULL] ARM: tegra: dt2 branch   Stephen Warren
• [PATCH] pinctrl: Add generic pinctrl-simple driver that supports omap2+ padconf   Stephen Warren
• [GIT PULL] ARM: tegra: dt2 branch   Stephen Warren
• [GIT PULL] ARM: tegra: for-3.5/ahb branch   Stephen Warren
• [GIT PULL] ARM: tegra: dt2 branch   Stephen Warren
• [GIT PULL] ARM: tegra: for-3.5/ahb branch   Stephen Warren
• [PATCH 1/5] pinctrl: a minor error checking improvement for pinconf   Stephen Warren
• [GIT PULL] ARM: tegra: dt2 branch   Stephen Warren
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Stephen Warren
• [GIT PULL] ARM: tegra: dt2 branch   Stephen Warren
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Stephen Warren
• [PATCH] pinctrl: Add generic pinctrl-simple driver that supports omap2+ padconf   Stephen Warren
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Stephen Warren
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Stephen Warren
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Stephen Warren
• [PATCH] pinctrl: mxs: add gpio range support   Stephen Warren
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Stephen Warren
• [PATCH 1/2] pinctrl: pinctrl-imx: add imx53 pinctrl driver   Stephen Warren
• [PATCH RFC 1/1] pinctrl: improve gpio support for dt   Stephen Warren
• [PATCH V2 1/3] ARM: tegra: trimslice: enable PCIe when booting from device tree   Stephen Warren
• [PATCH V2 2/3] ARM: tegra: harmony: init regulators, PCIe when booting from DT   Stephen Warren
• [PATCH V2 3/3] ARM: tegra: paz00: enable WiFi rfkill when booting from device tree   Stephen Warren
• [PATCH] ARM: dt: tegra: add Whistler device tree file   Stephen Warren
• [PATCH] gpiolib: Add of_get_gpio_chip_by_phandle() helper   Stephen Warren
• [PATCH RFC 1/1] pinctrl: improve gpio support for dt   Stephen Warren
• [PATCH RFC v2 1/2] pinctrl: add pinctrl_add_gpio_ranges function   Stephen Warren
• [PATCH RFC v2 2/2] pinctrl: add pinctrl gpio binding support   Stephen Warren
• db8500.dtsi: ab8500 at 5 reg property invalid length   Stephen Warren
• Duplicate labels in dts files   Stephen Warren
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Stephen Warren
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Stephen Warren
• Duplicate labels in dts files   Stephen Warren
• [PATCH RFC v2 2/2] pinctrl: add pinctrl gpio binding support   Stephen Warren
• [PATCH RFC v2 2/2] pinctrl: add pinctrl gpio binding support   Stephen Warren
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Stephen Warren
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Stephen Warren
• [PATCH 1/3] ARM: tegra: make .dts compilation depend on Tegra2 support   Stephen Warren
• [PATCH 2/3] ARM: tegra: remove CONFIG_MACH_TEGRA_DT   Stephen Warren
• [PATCH 3/3] ARM: tegra: remove Seaboard board files   Stephen Warren
• [PATCH] dt: name all Tegra binding docs consistently   Stephen Warren
• [PATCH V2 1/3] ARM: tegra: trimslice: enable PCIe when booting from device tree   Stephen Warren
• [PATCH RFC v2 2/2] pinctrl: add pinctrl gpio binding support   Stephen Warren
• perf_event_v7.c compilation failure in next-20120523   Stephen Warren
• [PATCH RFC v3 1/3] pinctrl: remove pinctrl_remove_gpio_range   Stephen Warren
• [PATCH RFC v3 3/3] pinctrl: add pinctrl gpio binding support   Stephen Warren
• [PATCH RFC v3 3/3] pinctrl: add pinctrl gpio binding support   Stephen Warren
• [PATCH RFC v3 3/3] pinctrl: add pinctrl gpio binding support   Stephen Warren
• [PATCH RFC v3 3/3] pinctrl: add pinctrl gpio binding support   Stephen Warren
• [PATCH v4 5/6] of: add of_parse_phandle_with_args_ext function   Stephen Warren
• [PATCH v4 6/6] pinctrl: add pinctrl gpio binding support   Stephen Warren
• [PATCH v4 6/6] pinctrl: add pinctrl gpio binding support   Stephen Warren
• arm: Remaining issue with alignment of __log_buf in printk.c   Stephen Warren
• amba, tegra-ahb and pci (Kconfig question)   Stephen Warren
• arm: Remaining issue with alignment of __log_buf in printk.c   Stephen Warren
• arm: Remaining issue with alignment of __log_buf in printk.c   Stephen Warren
• [PATCH v4 6/6] pinctrl: add pinctrl gpio binding support   Stephen Warren
• [RFC PATCH] clk: add extension API   Stephen Warren
• [PATCH] Add missing call to uart_update_timeout()   Lothar Waßmann
• [PATCH] gpio/generic: initialize the shadow of direction register   Lothar Waßmann
• [PATCH] gpio/generic: initialize the shadow of direction register   Lothar Waßmann
• [PATCH] gpio/generic: initialize the shadow of direction register   Lothar Waßmann
• [PATCH v7 3/3] MTD: atmel_nand: Update driver to support Programmable Multibit ECC controller   Lothar Waßmann
• [PATCH] gpio/generic: initialize the shadow of direction register   Lothar Waßmann
• [PATCH] gpio/generic: initialize the shadow of direction register   Lothar Waßmann
• [PATCH] gpio/generic: initialize the shadow of direction register   Lothar Waßmann
• [PATCH] gpio/generic: initialize the shadow of direction register   Lothar Waßmann
• [PATCH 4/4] MXS-MMC: Add wp-inverted property   Lothar Waßmann
• [PATCH 01/20] arm: Do not call do_signal() with irqs disabled   Richard Weinberger
• [PATCH 13/20] arm: Do not call try_to_freeze() in do_signal()   Richard Weinberger
• [PATCH 13/20] arm: Do not call try_to_freeze() in do_signal()   Richard Weinberger
• [PATCH] clk: give clock chance to change parent at setrate stage   Lei Wen
• [PATCH] clk: give clock chance to change parent at setrate stage   Lei Wen
• [PATCH V2] clk: give clock chance to change parent at setrate stage   Lei Wen
• [PATCH V2] clk: give clock chance to change parent at setrate stage   Lei Wen
• 将基层员工计时型薪酬设计得多元化s   Wgijh
• [PATCHv2 3/4] mm: vmalloc: add VM_DMA flag to indicate areas used by dma-mapping framework   Konrad Rzeszutek Wilk
• [PATCH] netwinder: nw_gpio_lock is a raw_spinlock_t   David Woodhouse
• [PATCH] netwinder: encapsulate CPLD hardware locking and access   David Woodhouse
• [PATCH V3 00/10] PM: Create the AVS(Adaptive Voltage Scaling)   Woodruff, Richard
• [linux-pm] [PATCH V3 00/10] PM: Create the AVS(Adaptive Voltage Scaling)   Woodruff, Richard
• Making ARM multiplatform kernels DT-only?   Wookey
• Making ARM multiplatform kernels DT-only?   Wookey
• [PATCH 02/19] led-triggers: create a trigger for CPU activity   Bryan Wu
• [PATCH v9 00/19] Introduce a led trigger for CPU activity and consolidate LED driver in ARM   Bryan Wu
• [PATCH 01/19] led-triggers: rename *trigger to *trig for unified naming scheme   Bryan Wu
• [PATCH 02/19] led-triggers: create a trigger for CPU activity   Bryan Wu
• [PATCH 03/19] ARM: at91: convert old leds drivers to gpio_led and led_trigger drivers   Bryan Wu
• [PATCH 04/19] ARM: mach-realview and mach-versatile: retire custom LED code   Bryan Wu
• [PATCH 05/19] ARM: mach-ks8695: remove leds driver, since nobody use it   Bryan Wu
• [PATCH 06/19] ARM: mach-shark: retire custom LED code   Bryan Wu
• [PATCH 07/19] ARM: mach-orion5x: convert custom LED code to gpio_led and LED CPU trigger   Bryan Wu
• [PATCH 08/19] ARM: mach-integrator: move CM_CTRL to header file for accessing by other functions   Bryan Wu
• [PATCH 09/19] ARM: mach-integrator: retire custom LED code   Bryan Wu
• [PATCH 10/19] ARM: mach-clps711x: retire custom LED code of P720T machine   Bryan Wu
• [PATCH 11/19] ARM: mach-ebsa110: retire custom LED code   Bryan Wu
• [PATCH 12/19] ARM: mach-footbridge: retire custom LED code   Bryan Wu
• [PATCH 13/19] char: nwflash: remove old led event code   Bryan Wu
• [PATCH 14/19] ARM: mach-pxa: retire custom LED code   Bryan Wu
• [PATCH 15/19] ARM: plat-samsung: remove including old leds event API header file   Bryan Wu
• [PATCH 16/19] ARM: mach-pnx4008: remove including old leds event API header file   Bryan Wu
• [PATCH 17/19] ARM: mach-omap1: retire custom LED code   Bryan Wu
• [PATCH 18/19] ARM: mach-sa1100: retire custom LED code   Bryan Wu
• [PATCH 19/19] ARM: use new LEDS CPU trigger stub to replace old one   Bryan Wu
• [PATCH v9 00/19] Introduce a led trigger for CPU activity and consolidate LED driver in ARM   Bryan Wu
• [PATCH v9 00/19] Introduce a led trigger for CPU activity and consolidate LED driver in ARM   Bryan Wu
• [PATCH v9 00/19] Introduce a led trigger for CPU activity and consolidate LED driver in ARM   Bryan Wu
• [PATCH v9 00/19] Introduce a led trigger for CPU activity and consolidate LED driver in ARM   Bryan Wu
• [PATCH v9 00/19] Introduce a led trigger for CPU activity and consolidate LED driver in ARM   Bryan Wu
• [PATCH v9 00/19] Introduce a led trigger for CPU activity and consolidate LED driver in ARM   Bryan Wu
• [PATCH v9 00/19] Introduce a led trigger for CPU activity and consolidate LED driver in ARM   Bryan Wu
• [PATCH v9 00/19] Introduce a led trigger for CPU activity and consolidate LED driver in ARM   Bryan Wu
• [PATCH v5] MTD: atmel_nand: Update driver to support Programmable Multibit ECC controller   Josh Wu
• [PATCH v5] MTD: atmel_nand: Update driver to support Programmable Multibit ECC controller   Josh Wu
• [PATCH v5] MTD: atmel_nand: Update driver to support Programmable Multibit ECC controller   Josh Wu
• [PATCH v6] MTD: atmel_nand: Update driver to support Programmable Multibit ECC controller   Josh Wu
• [PATCH v6] MTD: atmel_nand: Update driver to support Programmable Multibit ECC controller   Josh Wu
• [PATCH v7 0/3] Add PMECC support for at91 nand flash driver   Josh Wu
• [PATCH v7 1/3] MTD: at91: extract hw ecc initialization to one function   Josh Wu
• [PATCH v7 2/3] MTD: add dt parameters for PMECC   Josh Wu
• [PATCH v7 3/3] MTD: atmel_nand: Update driver to support Programmable Multibit ECC controller   Josh Wu
• [PATCH v7 0/3] Add PMECC support for at91 nand flash driver   Josh Wu
• [PATCH v7 3/3] MTD: atmel_nand: Update driver to support Programmable Multibit ECC controller   Josh Wu
• [PATCH v8 0/3] Add PMECC support for at91 nand flash driver   Josh Wu
• [PATCH v8 1/3] MTD: at91: extract hw ecc initialization to one function   Josh Wu
• [PATCH v8 2/3] MTD: add dt parameters for PMECC   Josh Wu
• [PATCH v8 3/3] MTD: atmel_nand: Update driver to support Programmable Multibit ECC controller   Josh Wu
• [PATCH v8 3/3] MTD: atmel_nand: Update driver to support Programmable Multibit ECC controller   Josh Wu
• [PATCH v8 2/3] MTD: add dt parameters for PMECC   Josh Wu
• [PATCH v8 1/3] MTD: at91: extract hw ecc initialization to one function   Josh Wu
• [PATCH v9 0/3] MTD: at91: Add PMECC support for at91 nand flash driver   Josh Wu
• [PATCH v9 1/3] MTD: at91: extract hw ecc initialization to one function and use relaxed read/write   Josh Wu
• [PATCH v9 2/3] MTD: at91: add dt parameters for PMECC   Josh Wu
• [PATCH v9 3/3] MTD: at91: atmel_nand: Update driver to support Programmable Multibit ECC controller   Josh Wu
• [PATCH v9 3/3] MTD: at91: atmel_nand: Update driver to support Programmable Multibit ECC controller   Josh Wu
• [PATCH v9 3/3] MTD: at91: atmel_nand: Update driver to support Programmable Multibit ECC controller   Josh Wu
• [PATCH v9 1/3] MTD: at91: extract hw ecc initialization to one function and use relaxed read/write   Josh Wu
• [PATCH 15/17] ARM: shmobile: use machine specific hook for late init   Rafael J. Wysocki
• [PATCH 00/02] mach-shmobile: Emma Mobile EV2 - first shot   Rafael J. Wysocki
• [PATCHv3 0/5] coupled cpuidle state support   Rafael J. Wysocki
• [PATCHv3 0/5] coupled cpuidle state support   Rafael J. Wysocki
• [PATCHv3 1/5] cpuidle: refactor out cpuidle_enter_state   Rafael J. Wysocki
• [linux-pm] [PATCHv3 2/5] cpuidle: fix error handling in __cpuidle_register_device   Rafael J. Wysocki
• [linux-pm] [PATCHv3 3/5] cpuidle: add support for states that affect multiple cpus   Rafael J. Wysocki
• [linux-pm] [PATCHv3 3/5] cpuidle: add support for states that affect multiple cpus   Rafael J. Wysocki
• [PATCH 00/02] mach-shmobile: Emma Mobile EV2 - first shot   Rafael J. Wysocki
• [linux-pm] [PATCHv3 3/5] cpuidle: add support for states that affect multiple cpus   Rafael J. Wysocki
• [PATCH 00/02] mach-shmobile: Emma Mobile EV2 - first shot   Rafael J. Wysocki
• [PATCH 00/02] mach-shmobile: Emma Mobile EV2 - first shot   Rafael J. Wysocki
• [PATCHv4 1/4] cpuidle: refactor out cpuidle_enter_state   Rafael J. Wysocki
• [PATCHv4 2/4] cpuidle: fix error handling in __cpuidle_register_device   Rafael J. Wysocki
• [PATCHv4 3/4] cpuidle: add support for states that affect multiple cpus   Rafael J. Wysocki
• [PATCHv4 4/4] cpuidle: coupled: add parallel barrier function   Rafael J. Wysocki
• [GIT PULL] Urgent fixes (for v3.4 if possible) for Renesas ARM-based platforms   Rafael J. Wysocki
• [PATCHv4 4/4] cpuidle: coupled: add parallel barrier function   Rafael J. Wysocki
• [GIT PULL] Renesas ARM-based platforms updates for v3.5   Rafael J. Wysocki
• [GIT PULL] Renesas ARM-based platforms updates for v3.5   Rafael J. Wysocki
• [GIT PULL] Urgent fixes (for v3.4 if possible) for Renesas ARM-based platforms   Rafael J. Wysocki
• [GIT PULL] Urgent fixes (for v3.4 if possible) for Renesas ARM-based platforms   Rafael J. Wysocki
• [GIT PULL] Renesas ARM-based platforms updates for v3.5   Rafael J. Wysocki
• [GIT PULL] Urgent fixes (for v3.4 if possible) for Renesas ARM-based platforms   Rafael J. Wysocki
• [GIT PULL][Update] Urgent fixes (for v3.4 if possible) for Renesas ARM-based platforms   Rafael J. Wysocki
• [GIT PULL][Update x2] Urgent fixes (for v3.4 if possible) for Renesas ARM-based platforms   Rafael J. Wysocki
• [GIT PULL][Update] Renesas ARM-based platforms: new boards support for v3.5   Rafael J. Wysocki
• [GIT PULL][Update] Renesas ARM-based platforms: new boards support for v3.5   Rafael J. Wysocki
• [PATCHv3 0/4] coupled cpuidle state support   Rafael J. Wysocki
• [GIT PULL] Renesas sh73a0 fix for v3.5   Rafael J. Wysocki
• [GIT PULL] Renesas Emma Mobile EV2 SoC and KZM9D board support for v3.5   Rafael J. Wysocki
• [GIT PULL] Renesas Emma Mobile EV2 SoC and KZM9D board support for v3.5   Rafael J. Wysocki
• [PATCH 1/2] ARM: mmp: move XX_REG definition to addr-map.h   Chao Xie
• [PATCH 2/2] ARM: mmp: add PM support for mmp2   Chao Xie
• [PATCH 1/4] ARM: mm: proc-mohawk: add suspend resume for mohawk   Chao Xie
• [PATCH 2/4] ARM: cache: tauros2: add disable and resume callback   Chao Xie
• [PATCH 3/4] ARM: mmp: ttc_dkb: add PMIC support   Chao Xie
• [PATCH 4/4] ARM: pxa910: add pm support for pxa910   Chao Xie
• common clock framework   Chao Xie
• common clock framework   Chao Xie
• [PATCH V2 1/2] ARM: mmp: move XX_REG definition to addr-map.h   Chao Xie
• [PATCH V2 2/2] ARM: mmp: add PM support for mmp2   Chao Xie
• [PATCH V2 1/4] ARM: mm: proc-mohawk: add suspend resume for mohawk   Chao Xie
• [PATCH V2 2/4] ARM: cache: tauros2: add disable and resume callback   Chao Xie
• [PATCH V2 3/4] ARM: mmp: ttc_dkb: add PMIC support   Chao Xie
• [PATCH V2 4/4] ARM: pxa910: add pm support for pxa910   Chao Xie
• common clock framework   Chao Xie
• FW: [alsa-devel] [PATCH 2/4] ASoC: mmp: add audio dma support   Chao Xie
• [PATCH 3/3] ARM: MMP: add 88pm860x battery-charger support   Raul Xiong
• common clock framework   Raul Xiong
• [PATCH] cpu_pm: fix some typos in comments   Raul Xiong
• [PATCH] cpu_pm: fix some typos in comments   Raul Xiong
• [PATCH] cpu_pm: fix some typos in comments   Raul Xiong
• linux-next: manual merge of the arm-soc tree with the crypto tree   Herbert Xu
• [PATCH 4/4] ASoC: add mmp brownstone support   Leo Yan
• AW: [PATCH v10 3/4] drivers/i2c/busses/i2c-at91.c: add new driver   Adrian Yanes
• [PATCH] Prevent process migration during vfp_init()   Hyungwoo Yang
• [PATCH] Prevent process migration during vfp_init()   Hyungwoo Yang
• [PATCH] Prevent process migration during vfp_init()   Hyungwoo Yang
• [PATCH] Prevent process migration during vfp_init()   Hyungwoo Yang
• [PATCH 1/1] mx3fb: support pan display with fb_set_var   Liu Ying-B17645
• ARM: ETH PHY Micrel: KSZ8051MNL Driver?   Shmuel Yitzhaki
• [PATCH] arm/dts: OMAP4: Add Variscite OMAP4 System-On-Modeule support   Uri Yosef
• A good sub-architecture to base new ports on?   Alexey Zaytsev
• A good sub-architecture to base new ports on?   Alexey Zaytsev
• A good sub-architecture to base new ports on?   Alexey Zaytsev
• [PATCH v3 0/6] thermal: exynos: Add kernel thermal support for exynos platform   Zhang, Rui
• [RFC PATCH] ARM: cmpxchg: define __HAVE_ARCH_CMPXCHG for armv6 and later   Yong Zhang
• [RFC PATCH] ARM: cmpxchg: define __HAVE_ARCH_CMPXCHG for armv6 and later   Yong Zhang
• [PATCH 09/11] ARM: imx6q: add ssi1 clk_lookup   Richard Zhao
• [PATCH 11/11] ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000   Richard Zhao
• [PATCH 03/11] ASoC: fsl: add sgtl5000 clock support for imx-sgtl5000   Richard Zhao
• [PATCH 10/11] ARM: imx6q_sabrelite: clkdev_add cko1 for sgtl5000   Richard Zhao
• [PATCH] ARM: imx6q: make ksz9021rn_phy_fixup depends on config of FEC   Richard Zhao
• [PATCH] ARM: imx6q: register phy fixup only when CONFIG_PHYLIB is enabled   Richard Zhao
• [PATCH V2 00/11] enable imx6q_sabrelite sgtl5000 audio support   Richard Zhao
• [PATCH V2 01/11] dma: imx-sdma: make channel0 operations atomic   Richard Zhao
• [PATCH V2 02/11] ARM: dts: imx6q-sabrelite: add i2c1 pinctrl support   Richard Zhao
• [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support   Richard Zhao
• [PATCH V2 04/11] ARM: dts: imx6q-sabrelite: add audmux pinctrl support   Richard Zhao
• [PATCH V2 05/11] ARM: imx6q: add ssi1_ipg clk_lookup   Richard Zhao
• [PATCH V2 06/11] ASoC: fsl_ssi: convert to use devm_clk_get   Richard Zhao
• [PATCH V2 07/11] ARM: imx6q_sabrelite: clk_register_clkdev cko1 for sgtl5000   Richard Zhao
• [PATCH V2 08/11] ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000   Richard Zhao
• [PATCH V2 09/11] ARM: dts: imx6q-sabrelite: add serial2 pinctrl support   Richard Zhao
• [PATCH V2 10/11] ARM: imx6q: change clkdev device name from xxxx.uart to xxxx.serial   Richard Zhao
• [PATCH V2 11/11] ARM: imx6q: change clkdev device name from xxxx.enet to xxxx.ethernet   Richard Zhao
• [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support   Richard Zhao
• [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support   Richard Zhao
• [PATCH V2 08/11] ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000   Richard Zhao
• [PATCH V2 08/11] ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000   Richard Zhao
• [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support   Richard Zhao
• [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support   Richard Zhao
• [PATCH Rebase 1/1] dma: imx-sdma: make channel0 operations atomic   Richard Zhao
• [PATCH] i2c: imx: convert to use managed functions   Richard Zhao
• [PATCH 1/2] mfd: anatop: make register accessor more flexible and rename meaningfully   Richard Zhao
• [PATCH 2/2] mfd: anatop: permit adata be NULL when access register   Richard Zhao
• [PATCH V2] mfd: anatop: make register accessor more flexible and rename meaningfully   Richard Zhao
• [PATCH] i2c: imx: convert to use managed functions   Richard Zhao
• [PATCH 1/1] ARM: imx6q: prepare and enable init on clks directly instead of clk_get first   Richard Zhao
• [PATCH 1/1] ARM: imx6q: prepare and enable init on clks directly instead of clk_get first   Richard Zhao
• [PATCH 2/2] mfd: anatop: permit adata be NULL when access register   Richard Zhao
• [PATCH 1/1] ARM: mxc: change timer clock to perclk   Richard Zhao
• [PATCH v1 0/7] preliminary work for adding imx6q_sabrelite usb support   Richard Zhao
• [PATCH v1 1/7] usb: chipidea: permit user select USB_EHCI_ROOT_HUB_TT   Richard Zhao
• [PATCH v1 2/7] usb: chipidea: remove zero check of hw_ep_max   Richard Zhao
• [PATCH v1 3/7] usb: chipidea: add imx on-soc utmi phy driver   Richard Zhao
• [PATCH v1 4/7] usb: chipidea: add imx driver binding   Richard Zhao
• [PATCH v1 5/7] ARM: imx6q: correct device name of usbphy and usboh3 clock export   Richard Zhao
• [PATCH v1 6/7] ARM: imx6q: add anatop initialization for usb controllers   Richard Zhao
• [PATCH v1 7/7] ARM: dts: imx6q-sabrelite: add usb devices   Richard Zhao
• [PATCH v1 4/7] usb: chipidea: add imx driver binding   Richard Zhao
• [PATCH] clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate().   Richard Zhao
• [PATCH] clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate().   Richard Zhao
• [PATCH v1 0/7] preliminary work for adding imx6q_sabrelite usb support   Richard Zhao
• [PATCH 1/8] MXS: Make clk_disable return integer   Richard Zhao
• [PATCH 2/8] MXS: Add USB EHCI and USB PHY clock handling   Richard Zhao
• [PATCH 3/8] MXS: Fixup i.MX233 USB base address name   Richard Zhao
• [PATCH 4/8] MXS: Add data shared between imx-otg and EHCI driver   Richard Zhao
• [PATCH 5/8] MXS: Add USB PHY driver   Richard Zhao
• [PATCH 5/8] MXS: Add USB PHY driver   Richard Zhao
• [PATCH v1 2/7] usb: chipidea: remove zero check of hw_ep_max   Richard Zhao
• [PATCH 5/8] MXS: Add USB PHY driver   Richard Zhao
• [PATCH v1 4/7] usb: chipidea: add imx driver binding   Richard Zhao
• [PATCH v1 4/7] usb: chipidea: add imx driver binding   Richard Zhao
• [PATCH v1 4/7] usb: chipidea: add imx driver binding   Richard Zhao
• [PATCH 2/2] mfd: anatop: permit adata be NULL when access register   Richard Zhao
• [PATCH v2 00/12] add imx usb driver for mx28/6x   Richard Zhao
• [PATCH v2 01/12] usb: otg: add notify_connect_change callback   Richard Zhao
• [PATCH v2 02/12] usb: chipidea: permit driver bindings pass phy pointer   Richard Zhao
• [PATCH v2 03/12] usb: ehci-hcd: notify phy when connect change   Richard Zhao
• [PATCH v2 04/12] usb: otg: add basic mxs phy driver support   Richard Zhao
• [PATCH v2 05/12] usb: chipidea: add imx driver binding   Richard Zhao
• [PATCH v2 06/12] ARM: imx6q: correct device name of usbphy and usb controller clock export   Richard Zhao
• [PATCH v2 07/12] ARM: imx6q: add config-on-boot gpios   Richard Zhao
• [PATCH v2 08/12] ARM: imx6q: add usbphy clocks   Richard Zhao
• [PATCH v2 09/12] ARM: imx6q: disable usb charger detector   Richard Zhao
• [PATCH v2 10/12] ARM: dts: imx6q-sabrelite: add usb devices   Richard Zhao
• [PATCH v2 11/12] ARM: mxs: clk_register_clkdev mx28 usb clocks   Richard Zhao
• [PATCH v2 12/12] ARM: dts: imx28-evk: add usb devices   Richard Zhao
• [PATCH v2 01/12] usb: otg: add notify_connect_change callback   Richard Zhao
• [PATCH 2/2] mfd: anatop: permit adata be NULL when access register   Richard Zhao
• [PATCH v2 01/12] usb: otg: add notify_connect_change callback   Richard Zhao
• [PATCH 1/1] dma: imx-sdma: buf_tail should be initialize in prepare function   Richard Zhao
• [PATCH V2 00/11] enable imx6q_sabrelite sgtl5000 audio support   Richard Zhao
• [PATCH v2 01/12] usb: otg: add notify_connect_change callback   Richard Zhao
• [PATCH V2 00/11] enable imx6q_sabrelite sgtl5000 audio support   Richard Zhao
• [PATCH v2 00/12] add imx usb driver for mx28/6x   Richard Zhao
• [PATCH v2 00/12] add imx usb driver for mx28/6x   Richard Zhao
• [PATCH v2 07/12] ARM: imx6q: add config-on-boot gpios   Richard Zhao
• [PATCH v2 09/12] ARM: imx6q: disable usb charger detector   Richard Zhao
• [PATCH v2 03/12] usb: ehci-hcd: notify phy when connect change   Richard Zhao
• [PATCH v2 05/12] usb: chipidea: add imx driver binding   Richard Zhao
• [PATCH v2 06/12] ARM: imx6q: correct device name of usbphy and usb controller clock export   Richard Zhao
• [PATCH v2 08/12] ARM: imx6q: add usbphy clocks   Richard Zhao
• [PATCH v2 11/12] ARM: mxs: clk_register_clkdev mx28 usb clocks   Richard Zhao
• [PATCH v2 12/12] ARM: dts: imx28-evk: add usb devices   Richard Zhao
• [PATCH v2 00/12] add imx usb driver for mx28/6x   Richard Zhao
• [PATCH v2 10/12] ARM: dts: imx6q-sabrelite: add usb devices   Richard Zhao
• [PATCH v2 07/12] ARM: imx6q: add config-on-boot gpios   Richard Zhao
• [PATCH v2 08/12] ARM: imx6q: add usbphy clocks   Richard Zhao
• [PATCH v2 10/12] ARM: dts: imx6q-sabrelite: add usb devices   Richard Zhao
• [PATCH v2 05/12] usb: chipidea: add imx driver binding   Richard Zhao
• [PATCH 1/1] dma: imx-sdma: buf_tail should be initialize in prepare function   Richard Zhao
• [PATCH v2 05/12] usb: chipidea: add imx driver binding   Richard Zhao
• [PATCH v2 02/12] usb: chipidea: permit driver bindings pass phy pointer   Richard Zhao
• [PATCH v2 05/12] usb: chipidea: add imx driver binding   Richard Zhao
• [PATCH v2 05/12] usb: chipidea: add imx driver binding   Richard Zhao
• [PATCH 1/1] dma: imx-sdma: buf_tail should be initialize in prepare function   Richard Zhao
• [PATCH v2 00/12] add imx usb driver for mx28/6x   Richard Zhao
• [PATCH v3 00/12] add imx usb driver for mx28/6x   Richard Zhao
• [PATCH v3 01/12] usb: otg: add notify_connect/notify_disconnect callback   Richard Zhao
• [PATCH v3 02/12] usb: chipidea: permit driver bindings pass phy pointer   Richard Zhao
• [PATCH v3 03/12] usb: ehci-hcd: notify phy when connect change   Richard Zhao
• [PATCH v3 04/12] usb: otg: add basic mxs phy driver support   Richard Zhao
• [PATCH v3 05/12] usb: chipidea: add imx platform driver   Richard Zhao
• [PATCH v3 06/12] ARM: imx6q: correct device name of usbphy and usb controller clock export   Richard Zhao
• [PATCH v3 07/12] ARM: imx6q: add config-on-boot gpios   Richard Zhao
• [PATCH v3 08/12] ARM: imx6q: add usbphy clocks   Richard Zhao
• [PATCH v3 09/12] ARM: imx6q: disable usb charger detector   Richard Zhao
• [PATCH v3 10/12] ARM: dts: imx6q-sabrelite: add usb devices   Richard Zhao
• [PATCH v3 11/12] ARM: mxs: clk_register_clkdev mx28 usb clocks   Richard Zhao
• [PATCH v3 12/12] ARM: dts: imx28-evk: add usb devices   Richard Zhao
• [PATCH 1/1] dma: imx-sdma: buf_tail should be initialize in prepare function   Richard Zhao
• [PATCH v3 05/12] usb: chipidea: add imx platform driver   Richard Zhao
• [PATCH v3 00/12] add imx usb driver for mx28/6x   Richard Zhao
• [PATCH v3 05/12] usb: chipidea: add imx platform driver   Richard Zhao
• [PATCH] ARM: BCMRING: Fix UART declaration and clk dev name mismatch   Jiandong Zheng
• [PATCH] ARM: BCMRING: fix IO mem static mapping   Jiandong Zheng
• [PATCH] ARM: BCMRING: Add debug macro   Jiandong Zheng
• [PATCH] ARM: BCMRING: Fix UART declaration and clk dev name mismatch   Jiandong Zheng
• How to check if a patch is applied, ejected or ignored?   Jiandong Zheng
• How to check if a patch is applied, ejected or ignored?   Jiandong Zheng
• [PATCH] ARM: BCMRING: Fix UART declaration and clk dev name mismatch   Jiandong Zheng
• [PATCH] ARM: BCMRING: Add debug macro   Jiandong Zheng
• [PATCH] ARM: BCMRING: fix IO mem static mapping   Jiandong Zheng
• [PATCH] ARM: BCMRING: Fix UART declaration and clk dev name mismatch   Jiandong Zheng
• [PATCH] ARM: BCMRING: Fix UART declaration and clk dev name mismatch   Jiandong Zheng
• [UPDATE PATCH] Fix bcmring IO mem mapping.   Jiandong Zheng
• [PATCH] ARM: BCMRING: fix IO mem static mapping   Jiandong Zheng
• [PATCH RESEND] ARM: pxa: hx4700: Initialize DS1WM clock_rate   Haojian Zhuang
• [PATCH 3/9] ARM: mmp: support DT in irq   Haojian Zhuang
• [PATCH 2/9] ARM: mmp: distinguish mmp and mmp2 in Kconfig   Haojian Zhuang
• [PATCH RESEND] ARM: pxa: hx4700: Initialize DS1WM clock_rate   Haojian Zhuang
• [PATCH RESEND] ARM: pxa: hx4700: Enable ASIC3 GPIO as a wakeup source   Haojian Zhuang
• [PATCH RESEND 2/3 v6] ARM: pxa: hx4700: Add PCMCIA/CF support   Haojian Zhuang
• [PATCH 3/9] ARM: mmp: support DT in irq   Haojian Zhuang
• [PATCH v2 0/9] support dt for mmp2   Haojian Zhuang
• [PATCH v2 1/9] ARM: mmp: fix build issue on mmp with device tree   Haojian Zhuang
• [PATCH v2 2/9] ARM: mmp: append CONFIG_MACH_MMP2_DT   Haojian Zhuang
• [PATCH v2 3/9] ARM: mmp: support DT in irq   Haojian Zhuang
• [PATCH v2 4/9] ARM: mmp: support DT in timer   Haojian Zhuang
• [PATCH v2 5/9] gpio: pxa: parse gpio from DTS file   Haojian Zhuang
• [PATCH v2 6/9] ARM: mmp: support mmp2 with device tree   Haojian Zhuang
• [PATCH v2 7/9] ARM: mmp: support pxa910 with device tree   Haojian Zhuang
• [PATCH v2 8/9] ARM: dts: refresh dts file for arch mmp   Haojian Zhuang
• [PATCH v2 9/9] Documentation: update docs for mmp dt   Haojian Zhuang
• [GIT PULL] [for 3.5] request pull of dt on arch-mmp   Haojian Zhuang
• [PATCH 3/3] ARM: MMP: add 88pm860x battery-charger support   Haojian Zhuang
• [PATCH RESEND 1/3 v7] ARM: pxa: hx4700: Add PCMCIA/CF platform device   Haojian Zhuang
• [PATCH 1/2] mfd: max8925: request resource region   Haojian Zhuang
• [PATCH 2/2] ARM: mmp: add io head file   Haojian Zhuang
• [GIT PULL][for 3.4]pull request for fix branch in arch-pxa   Haojian Zhuang
• [GIT PULL] [for 3.5] request pull of dt on arch-mmp   Haojian Zhuang
• [PATCH V2 1/2] ARM: mmp: move XX_REG definition to addr-map.h   Haojian Zhuang
• [PATCH V2 1/4] ARM: mm: proc-mohawk: add suspend resume for mohawk   Haojian Zhuang
• [PATCH 1/2] mfd: max8925: request resource region   Haojian Zhuang
• [PATCH 1/2] mfd: max8925: request resource region   Haojian Zhuang
• [GIT PULL][for 3.5] pull request of board-specific branch in arch-pxa git tree   Haojian Zhuang
• [PATCH] ARM: mach-pxa: Use REGULATOR_SUPPLY macro   Haojian Zhuang
• [PATCH 2/2 v7] ARM: pxa: hx4700: Add Synaptics NavPoint touchpad   Haojian Zhuang
• [GIT PULL][for 3.5] pull request of board-specific branch in arch-pxa   Haojian Zhuang
• [GIT PULL] [for 3.5] request pull of dt on arch-mmp   Haojian Zhuang
• [GIT PULL][for 3.5] pull request of dt branch in arch-pxa   Haojian Zhuang
• [GIT PULL][for 3.5] request pull of power branch in arch-pxa   Haojian Zhuang
• [PATCH] arm: Add basic support for new Marvell Armada SoC family   Haojian Zhuang
• linux-next: manual merge of the arm-soc tree with the arm tree   Haojian Zhuang
• [PATCH v2 0/9] support dt for mmp2   Haojian Zhuang
• [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree   Haojian Zhuang
• [PATCH 3/9] ARM: mmp: support DT in irq   Haojian Zhuang
• [PATCH 1/9] cpu: Introduce clear_tasks_mm_cpumask() helper   Peter Zijlstra
• Development tree for Cortex-A15?   Marc Zyngier
• Development tree for Cortex-A15?   Marc Zyngier
• Development tree for Cortex-A15?   Marc Zyngier
• Development tree for Cortex-A15?   Marc Zyngier
• Development tree for Cortex-A15?   Marc Zyngier
• [PATCH] ARM: move read_{boot, persistent}_clock to the architecture level   Marc Zyngier
• Development tree for Cortex-A15?   Marc Zyngier
• Development tree for Cortex-A15?   Marc Zyngier
• [PATCH] mach-shmobile: Emma Mobile EV2 SMP prototype code   Marc Zyngier
• [PATCH v2] ARM: DT: Add binding for GIC virtualization extentions (VGIC)   Marc Zyngier
• [PATCH v2] ARM: DT: Add binding for GIC virtualization extentions (VGIC)   Marc Zyngier
• [PATCH v2] ARM: DT: Add binding for GIC virtualization extentions (VGIC)   Marc Zyngier
• [PATCH v2] ARM: DT: Add binding for GIC virtualization extentions (VGIC)   Marc Zyngier
• [PATCH v2] ARM: DT: Add binding for GIC virtualization extentions (VGIC)   Marc Zyngier
• [PATCH v2] ARM: DT: Add binding for GIC virtualization extentions (VGIC)   Marc Zyngier
• [PATCH 0/4] mmc: atmel-mci: add support for old mci IPs   ludovic.desroches at atmel.com
• [PATCH 1/4] mmc: atmel-mci: the r/w proof capability lack was not well managed   ludovic.desroches at atmel.com
• [PATCH 2/4] mmc: atmel-mci: change the state machine   ludovic.desroches at atmel.com
• [PATCH 3/4] mmc: atmel-mci: add support for version lower than v2xx   ludovic.desroches at atmel.com
• [PATCH 4/4] mmc: atmel-mci: add debug logs   ludovic.desroches at atmel.com
• [PATCH] mmc: atmel-mci: fix burst/chunk size modification   ludovic.desroches at atmel.com
• [PATCH] mmc: atmel-mci: fix burst/chunk size modification   ludovic.desroches at atmel.com
• [PATCH 0/2] ARM: at91: allow all boards to use atmel-mci driver   ludovic.desroches at atmel.com
• [PATCH 1/2] ARM: at91: add atmel-mci support for chips and boards which can use it   ludovic.desroches at atmel.com
• [PATCH 2/2] mmc: at91-mci: this driver is now deprecated   ludovic.desroches at atmel.com
• [PATCH v2] ARM: at91: add atmel-mci support for chips and boards which can use it   ludovic.desroches at atmel.com
• [PATCH v3 0/3] atmel-mci device tree support   ludovic.desroches at atmel.com
• [PATCH v3 1/3] mmc: atmel-mci: add device tree support   ludovic.desroches at atmel.com
• [PATCH v3 2/3] ARM: at91: add clocks for DT entries   ludovic.desroches at atmel.com
• [PATCH v3 3/3] ARM: dts: add nodes for atmel hsmci controllers for atmel platforms   ludovic.desroches at atmel.com
• [PATCH v4 1/3] mmc: atmel-mci: add device tree support   ludovic.desroches at atmel.com
• [PATCH] mmc: atmel-mci: fix data timeout issue   ludovic.desroches at atmel.com
• [PATCH v4 2/3] ARM: at91: add clocks for DT entries   ludovic.desroches at atmel.com
• [PATCH v4 3/3] ARM: dts: add nodes for atmel hsmci controllers for atmel platforms   ludovic.desroches at atmel.com
• [PATCH v5 0/4] atmel-mci device tree support   ludovic.desroches at atmel.com
• [PATCH 1/4 v5] mmc: atmel-mci: add device tree support   ludovic.desroches at atmel.com
• [PATCH 2/4 v5] ARM: at91: add clocks for DT entries   ludovic.desroches at atmel.com
• [PATCH 3/4 v5] ARM: dts: add nodes for atmel hsmci controllers for atmel SOCs   ludovic.desroches at atmel.com
• [PATCH 4/4 v5] ARM: dts: add nodes for atmel hsmci controllers for atmel boards   ludovic.desroches at atmel.com
• [PATCH] ARM: at91: aic can use fast eoi handler type   ludovic.desroches at atmel.com
• [PATCH v2] ARM: at91: aic can use fast eoi handler type   ludovic.desroches at atmel.com
• [PATCH] ARM: at91: fix at91_aic_write macro   ludovic.desroches at atmel.com
• Query about: ARM11 MPCore: preemption/task migration cache coherency   bill4carson
• Query about: ARM11 MPCore: preemption/task migration cache coherency   bill4carson
• Query about: ARM11 MPCore: preemption/task migration cache coherency   bill4carson
• Query about: ARM11 MPCore: preemption/task migration cache coherency   bill4carson
• Query about: ARM11 MPCore: preemption/task migration cache coherency   bill4carson
• Query about: ARM11 MPCore: preemption/task migration cache coherency   bill4carson
• Query about: ARM11 MPCore: preemption/task migration cache coherency   bill4carson
• Query about: ARM11 MPCore: preemption/task migration cache coherency   bill4carson
• Query about: ARM11 MPCore: preemption/task migration cache coherency   bill4carson
• moving Tegra30 to the common clock framework   skannan at codeaurora.org
• [PATCH] clk: Fix race conditions between clk_set_parent() and clk_enable()   skannan at codeaurora.org
• oprofile and ARM A9 hardware counter   stephane eranian
• [PATCH 1/7] remoteproc: resource table overhaul   frq09524
• [PATCH 1/7] remoteproc: resource table overhaul   frq09524
• [alsa-devel] [PATCH 2/4] ASoC: mmp: add audio dma support   zhangfei gao
• [alsa-devel] [PATCH 2/4] ASoC: mmp: add audio dma support   zhangfei gao
• [alsa-devel] [PATCH 3/4] ASOC: mmp: add sspa support   zhangfei gao
• [alsa-devel] [PATCH 2/4] ASoC: mmp: add audio dma support   zhangfei gao
• [RFC 03/34] dmaengine: virt-dma: add support for cyclic DMA periodic callbacks   zhangfei gao
• [RFC 03/34] dmaengine: virt-dma: add support for cyclic DMA periodic callbacks   zhangfei gao
• Compile err with raumfeld_defconfig   jgq516 at gmail.com
• [PATCH 0/3] omap3/omap4: add device tree support for wdt   jgq516 at gmail.com
• [PATCH 1/3] arm/dts: add wdt node for omap3 and omap4   jgq516 at gmail.com
• [PATCH 2/3] OMAP: avoid build wdt platform device if with dt support   jgq516 at gmail.com
• [PATCH 3/3] watchdog: omap_wdt: add device tree support   jgq516 at gmail.com
• Query about: ARM11 MPCore: preemption/task migration cache coherency   snakky.zhang at gmail.com
• Query about: ARM11 MPCore: preemption/task migration cache coherency   snakky.zhang at gmail.com
• Query about: ARM11 MPCore: preemption/task migration cache coherency   snakky.zhang at gmail.com
• [PATCH v3 0/2] regulator: Add initial suport for max77686   yadi.brar01 at gmail.com
• [PATCH v3 1/2] mfd: Add support for MAX77686.   yadi.brar01 at gmail.com
• [PATCH v3 2/2] regulator: Add support for MAX77686.   yadi.brar01 at gmail.com
• smp_twd fix for adapting to cpu frequency change   shiraz hashim
• Re[3]: v3.4 boot failure on qemu-system-arm -M versatilepb   takuo.koguchi.sw at hitachi.com
• [PATCH] ARM: exynos: Adapt to cpuidle core time keeping and irq enable   amit kachhap
• [PATCH] gpiolib: Add of_get_gpio_chip_by_phandle() helper   viresh kumar
• [RFC 4/5] pinctrl: SPEAr: Add gpio ranges support   viresh kumar
• [RFC 4/5] pinctrl: SPEAr: Add gpio ranges support   viresh kumar
• [GIT PULL] SPEAr pinctrl updates for v-3.5   viresh kumar
• [GIT PULL] SPEAr SMI updates for v-3.5   viresh kumar
• [GIT PULL] SPEAr13xx support updates for v-3.5   viresh kumar
• [PATCH] clk: SPEAr600: Fix ethernet clock name for DT based probing   viresh kumar
• [linux-next] "clk: add non CONFIG_HAVE_CLK routines" commit   viresh kumar
• [PATCHv5 1/3] ARM: tegra: Add Tegra AHB driver   gregkh at linuxfoundation.org
• [PATCH 0/4] mmc: atmel-mci: add support for old mci IPs   ludovic.desroches
• [PATCH 2/2] mmc: at91-mci: this driver is now deprecated   ludovic.desroches
• [PATCH 2/2] mmc: at91-mci: this driver is now deprecated   ludovic.desroches
• [PATCH v2] ARM: at91: add atmel-mci support for chips and boards which can use it   ludovic.desroches
• [PATCH v3 3/3] ARM: dts: add nodes for atmel hsmci controllers for atmel platforms   ludovic.desroches
• [PATCH v3 1/3] mmc: atmel-mci: add device tree support   ludovic.desroches
• [PATCH] mmc: atmel-mci: fix burst/chunk size modification   ludovic.desroches
• [RFC PATCH 0/2] Remove at91 workaround from handle_IRQ   ludovic.desroches
• [PATCH 0/5] ARM: OMAP2+: PM: implement a caching mechanism on the power domains state registers   jean.pihet at newoldbits.com
• [PATCH 1/5] ARM: OMAP2+: PM: implement a caching mechanism on the power domains state registers   jean.pihet at newoldbits.com
• [PATCH 2/5] ARM: OMAP2+: PM: use the power domains registers cache for the power states   jean.pihet at newoldbits.com
• [PATCH 3/5] ARM: OMAP2+: PM: use the power domains registers cache for the logic and mem states   jean.pihet at newoldbits.com
• [PATCH 4/5] ARM: OMAP2+: PM: use the power domains registers cache invalidate API   jean.pihet at newoldbits.com
• [PATCH 5/5] ARM: OMAP2+: PM debug: use the power domains registers caching API   jean.pihet at newoldbits.com
• [PATCH] ARM: EXYNOS: Add platform resource definitions for FIMC-LITE   nop
• [PATCH v3 2/2] regulator: Add support for MAX77686.   jonghwa3.lee at samsung.com
• [PATCH v3 2/2] regulator: Add support for MAX77686.   jonghwa3.lee at samsung.com
• [PATCH v3 2/2] regulator: Add support for MAX77686.   jonghwa3.lee at samsung.com
• [PATCH v3 2/2] regulator: Add support for MAX77686.   jonghwa3.lee at samsung.com
• [PATCH 00/10] spi: s3c64xx: add support for device tree   padma venkat
• [PATCH 6/6] ARM: dts: Add nodes for spi controllers for Samsung Exynos5 platforms   padma venkat
• [PATCH 1/2] SPEAr: Add SMI NOR partition info in dts files   walimis
• moving Tegra30 to the common clock framework   zhoujie wu
• [PATCH V2] clk: give clock chance to change parent at setrate stage   zhoujie wu
• [PATCH V2] clk: give clock chance to change parent at setrate stage   zhoujie wu
• 外贸五步法外贸五步法 shared photos with you   外贸五步法外贸五步法