[PATCH v2] ARM: at91: add atmel-mci support for chips and boards which can use it
ludovic.desroches
ludovic.desroches at atmel.com
Mon May 21 06:31:12 EDT 2012
Le 05/21/2012 12:23 PM, ludovic.desroches at atmel.com a écrit :
> From: Ludovic Desroches<ludovic.desroches at atmel.com>
>
> Since atmel-mci driver supports all atmel mci version excepted the rm9200 one,
> use it instead of at91_mci driver.
Sorry commit message is wrong.
Since atmel-mci driver supports all atmel mci versions, use it instead
of at91_mci driver.
>
> Signed-off-by: Ludovic Desroches<ludovic.desroches at atmel.com>
> ---
> V2: add several boards I missed
>
> arch/arm/mach-at91/at91rm9200_devices.c | 99 ++++++++++++++++++
> arch/arm/mach-at91/at91sam9261_devices.c | 67 ++++++++++++
> arch/arm/mach-at91/at91sam9263.c | 2 +
> arch/arm/mach-at91/at91sam9263_devices.c | 164 ++++++++++++++++++++++++++++++
> arch/arm/mach-at91/at91sam9rl_devices.c | 70 +++++++++++++
> arch/arm/mach-at91/board-afeb-9260v1.c | 14 +++
> arch/arm/mach-at91/board-carmeva.c | 14 +++
> arch/arm/mach-at91/board-cpu9krea.c | 14 +++
> arch/arm/mach-at91/board-cpuat91.c | 14 +++
> arch/arm/mach-at91/board-csb337.c | 14 +++
> arch/arm/mach-at91/board-eb9200.c | 14 +++
> arch/arm/mach-at91/board-ecbat91.c | 14 +++
> arch/arm/mach-at91/board-eco920.c | 14 +++
> arch/arm/mach-at91/board-flexibity.c | 14 +++
> arch/arm/mach-at91/board-foxg20.c | 16 +++-
> arch/arm/mach-at91/board-kb9202.c | 14 +++
> arch/arm/mach-at91/board-neocore926.c | 14 +++
> arch/arm/mach-at91/board-picotux200.c | 14 +++
> arch/arm/mach-at91/board-qil-a9260.c | 14 +++
> arch/arm/mach-at91/board-rm9200dk.c | 14 +++
> arch/arm/mach-at91/board-rm9200ek.c | 14 +++
> arch/arm/mach-at91/board-rsi-ews.c | 14 +++
> arch/arm/mach-at91/board-sam9-l9260.c | 16 +++-
> arch/arm/mach-at91/board-sam9260ek.c | 16 +++-
> arch/arm/mach-at91/board-sam9261ek.c | 14 +++
> arch/arm/mach-at91/board-sam9263ek.c | 14 +++
> arch/arm/mach-at91/board-sam9rlek.c | 14 +++
> arch/arm/mach-at91/board-usb-a926x.c | 2 +-
> arch/arm/mach-at91/board-yl-9200.c | 14 +++
> 29 files changed, 728 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
> index 05774e5..2c13783 100644
> --- a/arch/arm/mach-at91/at91rm9200_devices.c
> +++ b/arch/arm/mach-at91/at91rm9200_devices.c
> @@ -374,6 +374,105 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
>
>
> /* --------------------------------------------------------------------
> + * MMC / SD
> + * -------------------------------------------------------------------- */
> +
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> +static u64 mmc_dmamask = DMA_BIT_MASK(32);
> +static struct mci_platform_data mmc_data;
> +
> +static struct resource mmc_resources[] = {
> + [0] = {
> + .start = AT91RM9200_BASE_MCI,
> + .end = AT91RM9200_BASE_MCI + SZ_16K - 1,
> + .flags = IORESOURCE_MEM,
> + },
> + [1] = {
> + .start = AT91RM9200_ID_MCI,
> + .end = AT91RM9200_ID_MCI,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +static struct platform_device at91rm9200_mmc_device = {
> + .name = "atmel_mci",
> + .id = -1,
> + .dev = {
> + .dma_mask =&mmc_dmamask,
> + .coherent_dma_mask = DMA_BIT_MASK(32),
> + .platform_data =&mmc_data,
> + },
> + .resource = mmc_resources,
> + .num_resources = ARRAY_SIZE(mmc_resources),
> +};
> +
> +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
> +{
> + unsigned int i;
> + unsigned int slot_count = 0;
> +
> + if (!data)
> + return;
> +
> + for (i = 0; i< ATMCI_MAX_NR_SLOTS; i++) {
> +
> + if (!data->slot[i].bus_width)
> + continue;
> +
> + /* input/irq */
> + if (gpio_is_valid(data->slot[i].detect_pin)) {
> + at91_set_gpio_input(data->slot[i].detect_pin, 1);
> + at91_set_deglitch(data->slot[i].detect_pin, 1);
> + }
> + if (gpio_is_valid(data->slot[i].wp_pin))
> + at91_set_gpio_input(data->slot[i].wp_pin, 1);
> +
> + switch (i) {
> + case 0: /* slot A */
> + /* CMD */
> + at91_set_A_periph(AT91_PIN_PA28, 1);
> + /* DAT0, maybe DAT1..DAT3 */
> + at91_set_A_periph(AT91_PIN_PA29, 1);
> + if (data->slot[i].bus_width == 4) {
> + at91_set_B_periph(AT91_PIN_PB3, 1);
> + at91_set_B_periph(AT91_PIN_PB4, 1);
> + at91_set_B_periph(AT91_PIN_PB5, 1);
> + }
> + slot_count++;
> + break;
> + case 1: /* slot B */
> + /* CMD */
> + at91_set_B_periph(AT91_PIN_PA8, 1);
> + /* DAT0, maybe DAT1..DAT3 */
> + at91_set_B_periph(AT91_PIN_PA9, 1);
> + if (data->slot[i].bus_width == 4) {
> + at91_set_B_periph(AT91_PIN_PA10, 1);
> + at91_set_B_periph(AT91_PIN_PA11, 1);
> + at91_set_B_periph(AT91_PIN_PA12, 1);
> + }
> + slot_count++;
> + break;
> + default:
> + printk(KERN_ERR
> + "AT91: SD/MMC slot %d not available\n", i);
> + break;
> + }
> + if (slot_count) {
> + /* CLK */
> + at91_set_A_periph(AT91_PIN_PA27, 0);
> +
> + mmc_data = *data;
> + platform_device_register(&at91rm9200_mmc_device);
> + }
> + }
> +
> +}
> +#else
> +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
> +#endif
> +
> +
> +/* --------------------------------------------------------------------
> * NAND / SmartMedia
> * -------------------------------------------------------------------- */
>
> diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
> index 4db961a..0817854 100644
> --- a/arch/arm/mach-at91/at91sam9261_devices.c
> +++ b/arch/arm/mach-at91/at91sam9261_devices.c
> @@ -202,7 +202,74 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
> void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
> #endif
>
> +/* --------------------------------------------------------------------
> + * MMC / SD Slot for Atmel MCI Driver
> + * -------------------------------------------------------------------- */
> +
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> +static u64 mmc_dmamask = DMA_BIT_MASK(32);
> +static struct mci_platform_data mmc_data;
> +
> +static struct resource mmc_resources[] = {
> + [0] = {
> + .start = AT91SAM9261_BASE_MCI,
> + .end = AT91SAM9261_BASE_MCI + SZ_16K - 1,
> + .flags = IORESOURCE_MEM,
> + },
> + [1] = {
> + .start = AT91SAM9261_ID_MCI,
> + .end = AT91SAM9261_ID_MCI,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +static struct platform_device at91sam9261_mmc_device = {
> + .name = "atmel_mci",
> + .id = -1,
> + .dev = {
> + .dma_mask =&mmc_dmamask,
> + .coherent_dma_mask = DMA_BIT_MASK(32),
> + .platform_data =&mmc_data,
> + },
> + .resource = mmc_resources,
> + .num_resources = ARRAY_SIZE(mmc_resources),
> +};
> +
> +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
> +{
> + if (!data)
> + return;
>
> + if (data->slot[0].bus_width) {
> + /* input/irq */
> + if (gpio_is_valid(data->slot[0].detect_pin)) {
> + at91_set_gpio_input(data->slot[0].detect_pin, 1);
> + at91_set_deglitch(data->slot[0].detect_pin, 1);
> + }
> + if (gpio_is_valid(data->slot[0].wp_pin))
> + at91_set_gpio_input(data->slot[0].wp_pin, 1);
> +
> + /* CLK */
> + at91_set_B_periph(AT91_PIN_PA2, 0);
> +
> + /* CMD */
> + at91_set_B_periph(AT91_PIN_PA1, 1);
> +
> + /* DAT0, maybe DAT1..DAT3 */
> + at91_set_B_periph(AT91_PIN_PA0, 1);
> + if (data->slot[0].bus_width == 4) {
> + at91_set_B_periph(AT91_PIN_PA4, 1);
> + at91_set_B_periph(AT91_PIN_PA5, 1);
> + at91_set_B_periph(AT91_PIN_PA6, 1);
> + }
> +
> + mmc_data = *data;
> + platform_device_register(&at91sam9261_mmc_device);
> + }
> +}
> +#else
> +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
> +#endif
> /* --------------------------------------------------------------------
> * NAND / SmartMedia
> * -------------------------------------------------------------------- */
> diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
> index ef301be..053e47a 100644
> --- a/arch/arm/mach-at91/at91sam9263.c
> +++ b/arch/arm/mach-at91/at91sam9263.c
> @@ -189,6 +189,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
> CLKDEV_CON_DEV_ID("pclk", "ssc.1",&ssc1_clk),
> CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0",&mmc0_clk),
> CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1",&mmc1_clk),
> + CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0",&mmc0_clk),
> + CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1",&mmc1_clk),
> CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0",&spi0_clk),
> CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1",&spi1_clk),
> CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0",&tcb_clk),
> diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
> index fe99206..617fbfc 100644
> --- a/arch/arm/mach-at91/at91sam9263_devices.c
> +++ b/arch/arm/mach-at91/at91sam9263_devices.c
> @@ -354,6 +354,170 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
> #endif
>
> /* --------------------------------------------------------------------
> + * MMC / SD
> + * -------------------------------------------------------------------- */
> +
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> +static u64 mmc_dmamask = DMA_BIT_MASK(32);
> +static struct mci_platform_data mmc0_data, mmc1_data;
> +
> +static struct resource mmc0_resources[] = {
> + [0] = {
> + .start = AT91SAM9263_BASE_MCI0,
> + .end = AT91SAM9263_BASE_MCI0 + SZ_16K - 1,
> + .flags = IORESOURCE_MEM,
> + },
> + [1] = {
> + .start = AT91SAM9263_ID_MCI0,
> + .end = AT91SAM9263_ID_MCI0,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +static struct platform_device at91sam9263_mmc0_device = {
> + .name = "atmel_mci",
> + .id = 0,
> + .dev = {
> + .dma_mask =&mmc_dmamask,
> + .coherent_dma_mask = DMA_BIT_MASK(32),
> + .platform_data =&mmc0_data,
> + },
> + .resource = mmc0_resources,
> + .num_resources = ARRAY_SIZE(mmc0_resources),
> +};
> +
> +static struct resource mmc1_resources[] = {
> + [0] = {
> + .start = AT91SAM9263_BASE_MCI1,
> + .end = AT91SAM9263_BASE_MCI1 + SZ_16K - 1,
> + .flags = IORESOURCE_MEM,
> + },
> + [1] = {
> + .start = AT91SAM9263_ID_MCI1,
> + .end = AT91SAM9263_ID_MCI1,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +static struct platform_device at91sam9263_mmc1_device = {
> + .name = "atmel_mci",
> + .id = 1,
> + .dev = {
> + .dma_mask =&mmc_dmamask,
> + .coherent_dma_mask = DMA_BIT_MASK(32),
> + .platform_data =&mmc1_data,
> + },
> + .resource = mmc1_resources,
> + .num_resources = ARRAY_SIZE(mmc1_resources),
> +};
> +
> +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
> +{
> + unsigned int i;
> + unsigned int slot_count = 0;
> +
> + if (!data)
> + return;
> +
> + for (i = 0; i< ATMCI_MAX_NR_SLOTS; i++) {
> +
> + if (!data->slot[i].bus_width)
> + continue;
> +
> + /* input/irq */
> + if (gpio_is_valid(data->slot[i].detect_pin)) {
> + at91_set_gpio_input(data->slot[i].detect_pin,
> + 1);
> + at91_set_deglitch(data->slot[i].detect_pin,
> + 1);
> + }
> + if (gpio_is_valid(data->slot[i].wp_pin))
> + at91_set_gpio_input(data->slot[i].wp_pin, 1);
> +
> + if (mmc_id == 0) { /* MCI0 */
> + switch (i) {
> + case 0: /* slot A */
> + /* CMD */
> + at91_set_A_periph(AT91_PIN_PA1, 1);
> + /* DAT0, maybe DAT1..DAT3 */
> + at91_set_A_periph(AT91_PIN_PA0, 1);
> + if (data->slot[i].bus_width == 4) {
> + at91_set_A_periph(AT91_PIN_PA3, 1);
> + at91_set_A_periph(AT91_PIN_PA4, 1);
> + at91_set_A_periph(AT91_PIN_PA5, 1);
> + }
> + slot_count++;
> + break;
> + case 1: /* slot B */
> + /* CMD */
> + at91_set_A_periph(AT91_PIN_PA16, 1);
> + /* DAT0, maybe DAT1..DAT3 */
> + at91_set_A_periph(AT91_PIN_PA17, 1);
> + if (data->slot[i].bus_width == 4) {
> + at91_set_A_periph(AT91_PIN_PA18, 1);
> + at91_set_A_periph(AT91_PIN_PA19, 1);
> + at91_set_A_periph(AT91_PIN_PA20, 1);
> + }
> + slot_count++;
> + break;
> + default:
> + printk(KERN_ERR
> + "AT91: SD/MMC slot %d not available\n", i);
> + break;
> + }
> + if (slot_count) {
> + /* CLK */
> + at91_set_A_periph(AT91_PIN_PA12, 0);
> +
> + mmc0_data = *data;
> + platform_device_register(&at91sam9263_mmc0_device);
> + }
> + } else if (mmc_id == 1) { /* MCI1 */
> + switch (i) {
> + case 0: /* slot A */
> + /* CMD */
> + at91_set_A_periph(AT91_PIN_PA7, 1);
> + /* DAT0, maybe DAT1..DAT3 */
> + at91_set_A_periph(AT91_PIN_PA8, 1);
> + if (data->slot[i].bus_width == 4) {
> + at91_set_A_periph(AT91_PIN_PA9, 1);
> + at91_set_A_periph(AT91_PIN_PA10, 1);
> + at91_set_A_periph(AT91_PIN_PA11, 1);
> + }
> + slot_count++;
> + break;
> + case 1: /* slot B */
> + /* CMD */
> + at91_set_A_periph(AT91_PIN_PA21, 1);
> + /* DAT0, maybe DAT1..DAT3 */
> + at91_set_A_periph(AT91_PIN_PA22, 1);
> + if (data->slot[i].bus_width == 4) {
> + at91_set_A_periph(AT91_PIN_PA23, 1);
> + at91_set_A_periph(AT91_PIN_PA24, 1);
> + at91_set_A_periph(AT91_PIN_PA25, 1);
> + }
> + slot_count++;
> + break;
> + default:
> + printk(KERN_ERR
> + "AT91: SD/MMC slot %d not available\n", i);
> + break;
> + }
> + if (slot_count) {
> + /* CLK */
> + at91_set_A_periph(AT91_PIN_PA6, 0);
> +
> + mmc1_data = *data;
> + platform_device_register(&at91sam9263_mmc1_device);
> + }
> + }
> + }
> +}
> +#else
> +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
> +#endif
> +
> +/* --------------------------------------------------------------------
> * Compact Flash (PCMCIA or IDE)
> * -------------------------------------------------------------------- */
>
> diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
> index fe4ae22..83c5845 100644
> --- a/arch/arm/mach-at91/at91sam9rl_devices.c
> +++ b/arch/arm/mach-at91/at91sam9rl_devices.c
> @@ -228,6 +228,76 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
>
>
> /* --------------------------------------------------------------------
> + * MMC / SD
> + * -------------------------------------------------------------------- */
> +
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> +static u64 mmc_dmamask = DMA_BIT_MASK(32);
> +static struct mci_platform_data mmc_data;
> +
> +static struct resource mmc_resources[] = {
> + [0] = {
> + .start = AT91SAM9RL_BASE_MCI,
> + .end = AT91SAM9RL_BASE_MCI + SZ_16K - 1,
> + .flags = IORESOURCE_MEM,
> + },
> + [1] = {
> + .start = AT91SAM9RL_ID_MCI,
> + .end = AT91SAM9RL_ID_MCI,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +static struct platform_device at91sam9rl_mmc_device = {
> + .name = "atmel_mci",
> + .id = -1,
> + .dev = {
> + .dma_mask =&mmc_dmamask,
> + .coherent_dma_mask = DMA_BIT_MASK(32),
> + .platform_data =&mmc_data,
> + },
> + .resource = mmc_resources,
> + .num_resources = ARRAY_SIZE(mmc_resources),
> +};
> +
> +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
> +{
> + if (!data)
> + return;
> +
> + if (data->slot[0].bus_width) {
> + /* input/irq */
> + if (gpio_is_valid(data->slot[0].detect_pin)) {
> + at91_set_gpio_input(data->slot[0].detect_pin, 1);
> + at91_set_deglitch(data->slot[0].detect_pin, 1);
> + }
> + if (gpio_is_valid(data->slot[0].wp_pin))
> + at91_set_gpio_input(data->slot[0].wp_pin, 1);
> +
> + /* CLK */
> + at91_set_A_periph(AT91_PIN_PA2, 0);
> +
> + /* CMD */
> + at91_set_A_periph(AT91_PIN_PA1, 1);
> +
> + /* DAT0, maybe DAT1..DAT3 */
> + at91_set_A_periph(AT91_PIN_PA0, 1);
> + if (data->slot[0].bus_width == 4) {
> + at91_set_A_periph(AT91_PIN_PA3, 1);
> + at91_set_A_periph(AT91_PIN_PA4, 1);
> + at91_set_A_periph(AT91_PIN_PA5, 1);
> + }
> +
> + mmc_data = *data;
> + platform_device_register(&at91sam9rl_mmc_device);
> + }
> +}
> +#else
> +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
> +#endif
> +
> +
> +/* --------------------------------------------------------------------
> * NAND / SmartMedia
> * -------------------------------------------------------------------- */
>
> diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
> index 161efba..1e294ba 100644
> --- a/arch/arm/mach-at91/board-afeb-9260v1.c
> +++ b/arch/arm/mach-at91/board-afeb-9260v1.c
> @@ -148,6 +148,15 @@ static struct atmel_nand_data __initdata afeb9260_nand_data = {
> /*
> * MCI (SD/MMC)
> */
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> +static struct mci_platform_data __initdata afeb9260_mci0_data = {
> + .slot[1] = {
> + .bus_width = 4,
> + .detect_pin = AT91_PIN_PC9,
> + .wp_pin = AT91_PIN_PC4,
> + },
> +};
> +#else
> static struct at91_mmc_data __initdata afeb9260_mmc_data = {
> .det_pin = AT91_PIN_PC9,
> .wp_pin = AT91_PIN_PC4,
> @@ -155,6 +164,7 @@ static struct at91_mmc_data __initdata afeb9260_mmc_data = {
> .wire4 = 1,
> .vcc_pin = -EINVAL,
> };
> +#endif
>
>
>
> @@ -202,7 +212,11 @@ static void __init afeb9260_board_init(void)
> at91_set_B_periph(AT91_PIN_PA10, 0); /* ETX2 */
> at91_set_B_periph(AT91_PIN_PA11, 0); /* ETX3 */
> /* MMC */
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> + at91_add_device_mci(0,&afeb9260_mci0_data);
> +#else
> at91_add_device_mmc(0,&afeb9260_mmc_data);
> +#endif
> /* I2C */
> at91_add_device_i2c(afeb9260_i2c_devices,
> ARRAY_SIZE(afeb9260_i2c_devices));
> diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
> index 59d9cf9..050b9d5 100644
> --- a/arch/arm/mach-at91/board-carmeva.c
> +++ b/arch/arm/mach-at91/board-carmeva.c
> @@ -81,6 +81,15 @@ static struct at91_udc_data __initdata carmeva_udc_data = {
> // .vcc_pin = -EINVAL,
> // };
>
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> +static struct mci_platform_data __initdata carmeva_mci0_data = {
> + .slot[0] = {
> + .bus_width = 4,
> + .detect_pin = AT91_PIN_PB10,
> + .wp_pin = AT91_PIN_PC14,
> + },
> +};
> +#else
> static struct at91_mmc_data __initdata carmeva_mmc_data = {
> .slot_b = 0,
> .wire4 = 1,
> @@ -88,6 +97,7 @@ static struct at91_mmc_data __initdata carmeva_mmc_data = {
> .wp_pin = AT91_PIN_PC14,
> .vcc_pin = -EINVAL,
> };
> +#endif
>
> static struct spi_board_info carmeva_spi_devices[] = {
> { /* DataFlash chip */
> @@ -153,7 +163,11 @@ static void __init carmeva_board_init(void)
> /* Compact Flash */
> // at91_add_device_cf(&carmeva_cf_data);
> /* MMC */
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> + at91_add_device_mci(0,&carmeva_mci0_data);
> +#else
> at91_add_device_mmc(0,&carmeva_mmc_data);
> +#endif
> /* LEDs */
> at91_gpio_leds(carmeva_leds, ARRAY_SIZE(carmeva_leds));
> }
> diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
> index 5f3680e..9842297 100644
> --- a/arch/arm/mach-at91/board-cpu9krea.c
> +++ b/arch/arm/mach-at91/board-cpu9krea.c
> @@ -339,6 +339,15 @@ static void __init cpu9krea_add_device_buttons(void)
> /*
> * MCI (SD/MMC)
> */
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> +static struct mci_platform_data __initdata cpu9krea_mci0_data = {
> + .slot[0] = {
> + .bus_width = 4,
> + .detect_pin = AT91_PIN_PA29,
> + .wp_pin = -EINVAL,
> + },
> +};
> +#else
> static struct at91_mmc_data __initdata cpu9krea_mmc_data = {
> .slot_b = 0,
> .wire4 = 1,
> @@ -346,6 +355,7 @@ static struct at91_mmc_data __initdata cpu9krea_mmc_data = {
> .wp_pin = -EINVAL,
> .vcc_pin = -EINVAL,
> };
> +#endif
>
> static void __init cpu9krea_board_init(void)
> {
> @@ -362,7 +372,11 @@ static void __init cpu9krea_board_init(void)
> /* Ethernet */
> at91_add_device_eth(&cpu9krea_macb_data);
> /* MMC */
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> + at91_add_device_mci(0,&cpu9krea_mci0_data);
> +#else
> at91_add_device_mmc(0,&cpu9krea_mmc_data);
> +#endif
> /* I2C */
> at91_add_device_i2c(cpu9krea_i2c_devices,
> ARRAY_SIZE(cpu9krea_i2c_devices));
> diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
> index e094cc8..cb5dcbf 100644
> --- a/arch/arm/mach-at91/board-cpuat91.c
> +++ b/arch/arm/mach-at91/board-cpuat91.c
> @@ -99,12 +99,22 @@ static struct at91_udc_data __initdata cpuat91_udc_data = {
> .pullup_pin = AT91_PIN_PC14,
> };
>
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> +static struct mci_platform_data __initdata cpuat91_mci0_data = {
> + .slot[0] = {
> + .bus_width = 4,
> + .detect_pin = AT91_PIN_PC2,
> + .wp_pin = -EINVAL,
> + },
> +};
> +#else
> static struct at91_mmc_data __initdata cpuat91_mmc_data = {
> .det_pin = AT91_PIN_PC2,
> .wire4 = 1,
> .wp_pin = -EINVAL,
> .vcc_pin = -EINVAL,
> };
> +#endif
>
> static struct physmap_flash_data cpuat91_flash_data = {
> .width = 2,
> @@ -171,7 +181,11 @@ static void __init cpuat91_board_init(void)
> /* USB Device */
> at91_add_device_udc(&cpuat91_udc_data);
> /* MMC */
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> + at91_add_device_mci(0,&cpuat91_mci0_data);
> +#else
> at91_add_device_mmc(0,&cpuat91_mmc_data);
> +#endif
> /* I2C */
> at91_add_device_i2c(NULL, 0);
> /* Platform devices */
> diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
> index 1a1547b..36d65ef 100644
> --- a/arch/arm/mach-at91/board-csb337.c
> +++ b/arch/arm/mach-at91/board-csb337.c
> @@ -95,6 +95,15 @@ static struct at91_cf_data __initdata csb337_cf_data = {
> .rst_pin = AT91_PIN_PD2,
> };
>
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> +static struct mci_platform_data __initdata csb337_mci0_data = {
> + .slot[0] = {
> + .bus_width = 4,
> + .detect_pin = AT91_PIN_PD5,
> + .wp_pin = AT91_PIN_PD6,
> + },
> +};
> +#else
> static struct at91_mmc_data __initdata csb337_mmc_data = {
> .det_pin = AT91_PIN_PD5,
> .slot_b = 0,
> @@ -102,6 +111,7 @@ static struct at91_mmc_data __initdata csb337_mmc_data = {
> .wp_pin = AT91_PIN_PD6,
> .vcc_pin = -EINVAL,
> };
> +#endif
>
> static struct spi_board_info csb337_spi_devices[] = {
> { /* CAN controller */
> @@ -244,7 +254,11 @@ static void __init csb337_board_init(void)
> /* SPI */
> at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
> /* MMC */
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> + at91_add_device_mci(0,&csb337_mci0_data);
> +#else
> at91_add_device_mmc(0,&csb337_mmc_data);
> +#endif
> /* NOR flash */
> platform_device_register(&csb_flash);
> /* LEDs */
> diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
> index d302ca3..f374ecc 100644
> --- a/arch/arm/mach-at91/board-eb9200.c
> +++ b/arch/arm/mach-at91/board-eb9200.c
> @@ -83,6 +83,15 @@ static struct at91_cf_data __initdata eb9200_cf_data = {
> .rst_pin = AT91_PIN_PC5,
> };
>
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> +static struct mci_platform_data __initdata eb9200_mci0_data = {
> + .slot[0] = {
> + .bus_width = 4,
> + .detect_pin = -EINVAL,
> + .wp_pin = -EINVAL,
> + },
> +};
> +#else
> static struct at91_mmc_data __initdata eb9200_mmc_data = {
> .slot_b = 0,
> .wire4 = 1,
> @@ -90,6 +99,7 @@ static struct at91_mmc_data __initdata eb9200_mmc_data = {
> .wp_pin = -EINVAL,
> .vcc_pin = -EINVAL,
> };
> +#endif
>
> static struct i2c_board_info __initdata eb9200_i2c_devices[] = {
> {
> @@ -116,7 +126,11 @@ static void __init eb9200_board_init(void)
> at91_add_device_spi(NULL, 0);
> /* MMC */
> /* only supports 1 or 4 bit interface, not wired through to SPI */
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> + at91_add_device_mci(0,&eb9200_mci0_data);
> +#else
> at91_add_device_mmc(0,&eb9200_mmc_data);
> +#endif
> }
>
> MACHINE_START(ATEB9200, "Embest ATEB9200")
> diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
> index 69966ce..0f39fb3 100644
> --- a/arch/arm/mach-at91/board-ecbat91.c
> +++ b/arch/arm/mach-at91/board-ecbat91.c
> @@ -75,6 +75,15 @@ static struct at91_usbh_data __initdata ecb_at91usbh_data = {
> .overcurrent_pin= {-EINVAL, -EINVAL},
> };
>
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> +static struct mci_platform_data __initdata ecbat91_mci0_data = {
> + .slot[0] = {
> + .bus_width = 4,
> + .detect_pin = -EINVAL,
> + .wp_pin = -EINVAL,
> + },
> +};
> +#else
> static struct at91_mmc_data __initdata ecb_at91mmc_data = {
> .slot_b = 0,
> .wire4 = 1,
> @@ -82,6 +91,7 @@ static struct at91_mmc_data __initdata ecb_at91mmc_data = {
> .wp_pin = -EINVAL,
> .vcc_pin = -EINVAL,
> };
> +#endif
>
>
> #if defined(CONFIG_MTD_DATAFLASH)
> @@ -164,7 +174,11 @@ static void __init ecb_at91board_init(void)
> at91_add_device_i2c(NULL, 0);
>
> /* MMC */
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> + at91_add_device_mci(0,&ecbat91_mci0_data);
> +#else
> at91_add_device_mmc(0,&ecb_at91mmc_data);
> +#endif
>
> /* SPI */
> at91_add_device_spi(ecb_at91spi_devices, ARRAY_SIZE(ecb_at91spi_devices));
> diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
> index f23aabe..932bebd 100644
> --- a/arch/arm/mach-at91/board-eco920.c
> +++ b/arch/arm/mach-at91/board-eco920.c
> @@ -64,6 +64,15 @@ static struct at91_udc_data __initdata eco920_udc_data = {
> .pullup_pin = AT91_PIN_PB13,
> };
>
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> +static struct mci_platform_data __initdata eco920_mci0_data = {
> + .slot[0] = {
> + .bus_width = 1,
> + .detect_pin = -EINVAL,
> + .wp_pin = -EINVAL,
> + },
> +};
> +#else
> static struct at91_mmc_data __initdata eco920_mmc_data = {
> .slot_b = 0,
> .wire4 = 0,
> @@ -71,6 +80,7 @@ static struct at91_mmc_data __initdata eco920_mmc_data = {
> .wp_pin = -EINVAL,
> .vcc_pin = -EINVAL,
> };
> +#endif
>
> static struct physmap_flash_data eco920_flash_data = {
> .width = 2,
> @@ -108,7 +118,11 @@ static void __init eco920_board_init(void)
> at91_add_device_usbh(&eco920_usbh_data);
> at91_add_device_udc(&eco920_udc_data);
>
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> + at91_add_device_mci(0,&eco920_mci0_data);
> +#else
> at91_add_device_mmc(0,&eco920_mmc_data);
> +#endif
> platform_device_register(&eco920_flash);
>
> at91_ramc_write(0, AT91_SMC_CSR(7), AT91_SMC_RWHOLD_(1)
> diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
> index 1815152..6632a80 100644
> --- a/arch/arm/mach-at91/board-flexibity.c
> +++ b/arch/arm/mach-at91/board-flexibity.c
> @@ -80,6 +80,15 @@ static struct spi_board_info flexibity_spi_devices[] = {
> };
>
> /* MCI (SD/MMC) */
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> +static struct mci_platform_data __initdata flexibity_mci0_data = {
> + .slot[0] = {
> + .bus_width = 4,
> + .detect_pin = AT91_PIN_PC9,
> + .wp_pin = AT91_PIN_PC4,
> + },
> +};
> +#else
> static struct at91_mmc_data __initdata flexibity_mmc_data = {
> .slot_b = 0,
> .wire4 = 1,
> @@ -87,6 +96,7 @@ static struct at91_mmc_data __initdata flexibity_mmc_data = {
> .wp_pin = AT91_PIN_PC4,
> .vcc_pin = -EINVAL,
> };
> +#endif
>
> /* LEDs */
> static struct gpio_led flexibity_leds[] = {
> @@ -155,7 +165,11 @@ static void __init flexibity_board_init(void)
> at91_add_device_spi(flexibity_spi_devices,
> ARRAY_SIZE(flexibity_spi_devices));
> /* MMC */
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> + at91_add_device_mci(0,&flexibity_mci0_data);
> +#else
> at91_add_device_mmc(0,&flexibity_mmc_data);
> +#endif
> /* LEDs */
> at91_gpio_leds(flexibity_leds, ARRAY_SIZE(flexibity_leds));
> }
> diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
> index caf017f..6cda303 100644
> --- a/arch/arm/mach-at91/board-foxg20.c
> +++ b/arch/arm/mach-at91/board-foxg20.c
> @@ -123,7 +123,7 @@ static struct at91_udc_data __initdata foxg20_udc_data = {
> * SPI devices.
> */
> static struct spi_board_info foxg20_spi_devices[] = {
> -#if !defined(CONFIG_MMC_AT91)
> +#if !defined(CONFIG_MMC_AT91)&& !defined(CONFIG_MMC_ATMELMCI)
> {
> .modalias = "mtd_dataflash",
> .chip_select = 1,
> @@ -146,6 +146,7 @@ static struct macb_platform_data __initdata foxg20_macb_data = {
> * MCI (SD/MMC)
> * det_pin, wp_pin and vcc_pin are not connected
> */
> +#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
> static struct at91_mmc_data __initdata foxg20_mmc_data = {
> .slot_b = 1,
> .wire4 = 1,
> @@ -153,6 +154,15 @@ static struct at91_mmc_data __initdata foxg20_mmc_data = {
> .wp_pin = -EINVAL,
> .vcc_pin = -EINVAL,
> };
> +#elif defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> +static struct mci_platform_data __initdata foxg20_mci0_data = {
> + .slot[1] = {
> + .bus_width = 4,
> + .detect_pin = -EINVAL,
> + .wp_pin = -EINVAL,
> + },
> +};
> +#endif
>
>
> /*
> @@ -251,7 +261,11 @@ static void __init foxg20_board_init(void)
> /* Ethernet */
> at91_add_device_eth(&foxg20_macb_data);
> /* MMC */
> +#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
> at91_add_device_mmc(0,&foxg20_mmc_data);
> +#elif defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> + at91_add_device_mci(0,&foxg20_mci0_data);
> +#endif
> /* I2C */
> at91_add_device_i2c(foxg20_i2c_devices, ARRAY_SIZE(foxg20_i2c_devices));
> /* LEDs */
> diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
> index 59b92aa..e31ec8e 100644
> --- a/arch/arm/mach-at91/board-kb9202.c
> +++ b/arch/arm/mach-at91/board-kb9202.c
> @@ -86,6 +86,15 @@ static struct at91_udc_data __initdata kb9202_udc_data = {
> .pullup_pin = AT91_PIN_PB22,
> };
>
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> +static struct mci_platform_data __initdata kb9202_mci0_data = {
> + .slot[0] = {
> + .bus_width = 4,
> + .detect_pin = AT91_PIN_PB2,
> + .wp_pin = -EINVAL,
> + },
> +};
> +#else
> static struct at91_mmc_data __initdata kb9202_mmc_data = {
> .det_pin = AT91_PIN_PB2,
> .slot_b = 0,
> @@ -93,6 +102,7 @@ static struct at91_mmc_data __initdata kb9202_mmc_data = {
> .wp_pin = -EINVAL,
> .vcc_pin = -EINVAL,
> };
> +#endif
>
> static struct mtd_partition __initdata kb9202_nand_partition[] = {
> {
> @@ -124,7 +134,11 @@ static void __init kb9202_board_init(void)
> /* USB Device */
> at91_add_device_udc(&kb9202_udc_data);
> /* MMC */
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> + at91_add_device_mci(0,&kb9202_mci0_data);
> +#else
> at91_add_device_mmc(0,&kb9202_mmc_data);
> +#endif
> /* I2C */
> at91_add_device_i2c(NULL, 0);
> /* SPI */
> diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
> index 57d5f6a..849b938 100644
> --- a/arch/arm/mach-at91/board-neocore926.c
> +++ b/arch/arm/mach-at91/board-neocore926.c
> @@ -146,12 +146,22 @@ static struct spi_board_info neocore926_spi_devices[] = {
> /*
> * MCI (SD/MMC)
> */
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> +static struct mci_platform_data __initdata neocore926_mci0_data = {
> + .slot[0] = {
> + .bus_width = 4,
> + .detect_pin = AT91_PIN_PE18,
> + .wp_pin = AT91_PIN_PE19,
> + },
> +};
> +#else
> static struct at91_mmc_data __initdata neocore926_mmc_data = {
> .wire4 = 1,
> .det_pin = AT91_PIN_PE18,
> .wp_pin = AT91_PIN_PE19,
> .vcc_pin = -EINVAL,
> };
> +#endif
>
>
> /*
> @@ -357,7 +367,11 @@ static void __init neocore926_board_init(void)
> neocore926_add_device_ts();
>
> /* MMC */
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> + at91_add_device_mci(0,&neocore926_mci0_data);
> +#else
> at91_add_device_mmc(1,&neocore926_mmc_data);
> +#endif
>
> /* Ethernet */
> at91_add_device_eth(&neocore926_macb_data);
> diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
> index 59e35dd..a8cb032 100644
> --- a/arch/arm/mach-at91/board-picotux200.c
> +++ b/arch/arm/mach-at91/board-picotux200.c
> @@ -72,6 +72,15 @@ static struct at91_usbh_data __initdata picotux200_usbh_data = {
> .overcurrent_pin= {-EINVAL, -EINVAL},
> };
>
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> +static struct mci_platform_data __initdata picotux200_mci0_data = {
> + .slot[0] = {
> + .bus_width = 4,
> + .detect_pin = AT91_PIN_PB27,
> + .wp_pin = AT91_PIN_PA17,
> + },
> +};
> +#else
> static struct at91_mmc_data __initdata picotux200_mmc_data = {
> .det_pin = AT91_PIN_PB27,
> .slot_b = 0,
> @@ -79,6 +88,7 @@ static struct at91_mmc_data __initdata picotux200_mmc_data = {
> .wp_pin = AT91_PIN_PA17,
> .vcc_pin = -EINVAL,
> };
> +#endif
>
> #define PICOTUX200_FLASH_BASE AT91_CHIPSELECT_0
> #define PICOTUX200_FLASH_SIZE SZ_4M
> @@ -115,7 +125,11 @@ static void __init picotux200_board_init(void)
> at91_add_device_i2c(NULL, 0);
> /* MMC */
> at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> + at91_add_device_mci(0,&picotux200_mci0_data);
> +#else
> at91_add_device_mmc(0,&picotux200_mmc_data);
> +#endif
> /* NOR Flash */
> platform_device_register(&picotux200_flash);
> }
> diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
> index b6ed5ed..2a49993 100644
> --- a/arch/arm/mach-at91/board-qil-a9260.c
> +++ b/arch/arm/mach-at91/board-qil-a9260.c
> @@ -173,6 +173,15 @@ static void __init ek_add_device_nand(void)
> /*
> * MCI (SD/MMC)
> */
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> +static struct mci_platform_data __initdata ek_mci0_data = {
> + .slot[0] = {
> + .bus_width = 4,
> + .detect_pin = -EINVAL,
> + .wp_pin = -EINVAL,
> + },
> +};
> +#else
> static struct at91_mmc_data __initdata ek_mmc_data = {
> .slot_b = 0,
> .wire4 = 1,
> @@ -180,6 +189,7 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
> .wp_pin = -EINVAL,
> .vcc_pin = -EINVAL,
> };
> +#endif
>
> /*
> * GPIO Buttons
> @@ -249,7 +259,11 @@ static void __init ek_board_init(void)
> /* Ethernet */
> at91_add_device_eth(&ek_macb_data);
> /* MMC */
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> + at91_add_device_mci(0,&ek_mci0_data);
> +#else
> at91_add_device_mmc(0,&ek_mmc_data);
> +#endif
> /* Push Buttons */
> ek_add_device_buttons();
> /* LEDs */
> diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
> index 01332aa..b6128fb 100644
> --- a/arch/arm/mach-at91/board-rm9200dk.c
> +++ b/arch/arm/mach-at91/board-rm9200dk.c
> @@ -90,6 +90,15 @@ static struct at91_cf_data __initdata dk_cf_data = {
> };
>
> #ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> +static struct mci_platform_data __initdata dk_mci0_data = {
> + .slot[0] = {
> + .bus_width = 4,
> + .detect_pin = -EINVAL,
> + .wp_pin = -EINVAL,
> + },
> +};
> +#else
> static struct at91_mmc_data __initdata dk_mmc_data = {
> .slot_b = 0,
> .wire4 = 1,
> @@ -98,6 +107,7 @@ static struct at91_mmc_data __initdata dk_mmc_data = {
> .vcc_pin = -EINVAL,
> };
> #endif
> +#endif
>
> static struct spi_board_info dk_spi_devices[] = {
> { /* DataFlash chip */
> @@ -211,8 +221,12 @@ static void __init dk_board_init(void)
> #else
> /* MMC */
> at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> + at91_add_device_mci(0,&dk_mci0_data);
> +#else
> at91_add_device_mmc(0,&dk_mmc_data);
> #endif
> +#endif
> /* NAND */
> at91_add_device_nand(&dk_nand_data);
> /* NOR Flash */
> diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
> index b2e4fe2..7177aac 100644
> --- a/arch/arm/mach-at91/board-rm9200ek.c
> +++ b/arch/arm/mach-at91/board-rm9200ek.c
> @@ -83,6 +83,7 @@ static struct at91_udc_data __initdata ek_udc_data = {
> };
>
> #ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
> +#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
> static struct at91_mmc_data __initdata ek_mmc_data = {
> .det_pin = AT91_PIN_PB27,
> .slot_b = 0,
> @@ -90,6 +91,15 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
> .wp_pin = AT91_PIN_PA17,
> .vcc_pin = -EINVAL,
> };
> +#elif defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> +static struct mci_platform_data __initdata ek_mci0_data = {
> + .slot[0] = {
> + .bus_width = 4,
> + .detect_pin = AT91_PIN_PB27,
> + .wp_pin = AT91_PIN_PA17,
> + }
> +};
> +#endif
> #endif
>
> static struct spi_board_info ek_spi_devices[] = {
> @@ -180,7 +190,11 @@ static void __init ek_board_init(void)
> #else
> /* MMC */
> at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
> +#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
> at91_add_device_mmc(0,&ek_mmc_data);
> +#elif defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> + at91_add_device_mci(0,&ek_mci0_data);
> +#endif
> #endif
> /* NOR Flash */
> platform_device_register(&ek_flash);
> diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c
> index af0750f..373537a 100644
> --- a/arch/arm/mach-at91/board-rsi-ews.c
> +++ b/arch/arm/mach-at91/board-rsi-ews.c
> @@ -77,12 +77,22 @@ static struct at91_usbh_data rsi_ews_usbh_data __initdata = {
> /*
> * SD/MC
> */
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> +static struct mci_platform_data __initdata rsi_ews_mci0_data = {
> + .slot[0] = {
> + .bus_width = 4,
> + .detect_pin = AT91_PIN_PB27,
> + .wp_pin = AT91_PIN_PB29,
> + },
> +};
> +#else
> static struct at91_mmc_data rsi_ews_mmc_data __initdata = {
> .slot_b = 0,
> .wire4 = 1,
> .det_pin = AT91_PIN_PB27,
> .wp_pin = AT91_PIN_PB29,
> };
> +#endif
>
> /*
> * I2C
> @@ -218,7 +228,11 @@ static void __init rsi_ews_board_init(void)
> at91_add_device_spi(rsi_ews_spi_devices,
> ARRAY_SIZE(rsi_ews_spi_devices));
> /* MMC */
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> + at91_add_device_mci(0,&rsi_ews_mci0_data);
> +#else
> at91_add_device_mmc(0,&rsi_ews_mmc_data);
> +#endif
> /* NOR Flash */
> platform_device_register(&rsiews_nor_flash);
> /* LEDs */
> diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
> index e8b116b..7562011 100644
> --- a/arch/arm/mach-at91/board-sam9-l9260.c
> +++ b/arch/arm/mach-at91/board-sam9-l9260.c
> @@ -89,7 +89,7 @@ static struct at91_udc_data __initdata ek_udc_data = {
> * SPI devices.
> */
> static struct spi_board_info ek_spi_devices[] = {
> -#if !defined(CONFIG_MMC_AT91)
> +#if !defined(CONFIG_MMC_AT91)&& !defined(CONFIG_MMC_ATMELMCI)
> { /* DataFlash chip */
> .modalias = "mtd_dataflash",
> .chip_select = 1,
> @@ -174,6 +174,15 @@ static void __init ek_add_device_nand(void)
> /*
> * MCI (SD/MMC)
> */
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> +static struct mci_platform_data __initdata ek_mci0_data = {
> + .slot[1] = {
> + .bus_width = 4,
> + .detect_pin = AT91_PIN_PC8,
> + .wp_pin = AT91_PIN_PC4,
> + },
> +};
> +#else
> static struct at91_mmc_data __initdata ek_mmc_data = {
> .slot_b = 1,
> .wire4 = 1,
> @@ -181,6 +190,7 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
> .wp_pin = AT91_PIN_PC4,
> .vcc_pin = -EINVAL,
> };
> +#endif
>
> static void __init ek_board_init(void)
> {
> @@ -197,7 +207,11 @@ static void __init ek_board_init(void)
> /* Ethernet */
> at91_add_device_eth(&ek_macb_data);
> /* MMC */
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> + at91_add_device_mci(0,&ek_mci0_data);
> +#else
> at91_add_device_mmc(0,&ek_mmc_data);
> +#endif
> /* I2C */
> at91_add_device_i2c(NULL, 0);
> }
> diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
> index d5aec55..b39009e 100644
> --- a/arch/arm/mach-at91/board-sam9260ek.c
> +++ b/arch/arm/mach-at91/board-sam9260ek.c
> @@ -121,7 +121,7 @@ static void __init at73c213_set_clk(struct at73c213_board_info *info) {}
> * SPI devices.
> */
> static struct spi_board_info ek_spi_devices[] = {
> -#if !defined(CONFIG_MMC_AT91)
> +#if !defined(CONFIG_MMC_AT91)&& !defined(CONFIG_MMC_ATMELMCI)
> { /* DataFlash chip */
> .modalias = "mtd_dataflash",
> .chip_select = 1,
> @@ -224,6 +224,15 @@ static void __init ek_add_device_nand(void)
> /*
> * MCI (SD/MMC)
> */
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> +static struct mci_platform_data __initdata ek_mci0_data = {
> + .slot[1] = {
> + .bus_width = 4,
> + .detect_pin = -EINVAL,
> + .wp_pin = -EINVAL,
> + },
> +};
> +#else
> static struct at91_mmc_data __initdata ek_mmc_data = {
> .slot_b = 1,
> .wire4 = 1,
> @@ -231,6 +240,7 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
> .wp_pin = -EINVAL,
> .vcc_pin = -EINVAL,
> };
> +#endif
>
>
> /*
> @@ -332,7 +342,11 @@ static void __init ek_board_init(void)
> /* Ethernet */
> at91_add_device_eth(&ek_macb_data);
> /* MMC */
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> + at91_add_device_mci(0,&ek_mci0_data);
> +#else
> at91_add_device_mmc(0,&ek_mmc_data);
> +#endif
> /* I2C */
> at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
> /* SSC (to AT73C213) */
> diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
> index 065fed3..797dd7c 100644
> --- a/arch/arm/mach-at91/board-sam9261ek.c
> +++ b/arch/arm/mach-at91/board-sam9261ek.c
> @@ -344,6 +344,7 @@ static struct spi_board_info ek_spi_devices[] = {
> #else /* CONFIG_SPI_ATMEL_* */
> /* spi0 and mmc/sd share the same PIO pins: cannot be used at the same time */
>
> +#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
> /*
> * MCI (SD/MMC)
> * det_pin, wp_pin and vcc_pin are not connected
> @@ -354,6 +355,15 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
> .wp_pin = -EINVAL,
> .vcc_pin = -EINVAL,
> };
> +#elif defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> +static struct mci_platform_data __initdata mci0_data = {
> + .slot[0] = {
> + .bus_width = 4,
> + .detect_pin = -EINVAL,
> + .wp_pin = -EINVAL,
> + },
> +};
> +#endif
>
> #endif /* CONFIG_SPI_ATMEL_* */
>
> @@ -601,7 +611,11 @@ static void __init ek_board_init(void)
> at91_add_device_ssc(AT91SAM9261_ID_SSC1, ATMEL_SSC_TX);
> #else
> /* MMC */
> +#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
> at91_add_device_mmc(0,&ek_mmc_data);
> +#elif defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> + at91_add_device_mci(0,&mci0_data);
> +#endif
> #endif
> /* LCD Controller */
> at91_add_device_lcdc(&ek_lcdc_data);
> diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
> index 2ffe50f..419c57a 100644
> --- a/arch/arm/mach-at91/board-sam9263ek.c
> +++ b/arch/arm/mach-at91/board-sam9263ek.c
> @@ -149,12 +149,22 @@ static struct spi_board_info ek_spi_devices[] = {
> /*
> * MCI (SD/MMC)
> */
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> +static struct mci_platform_data __initdata mci1_data = {
> + .slot[0] = {
> + .bus_width = 4,
> + .detect_pin = AT91_PIN_PE18,
> + .wp_pin = AT91_PIN_PE19,
> + },
> +};
> +#else
> static struct at91_mmc_data __initdata ek_mmc_data = {
> .wire4 = 1,
> .det_pin = AT91_PIN_PE18,
> .wp_pin = AT91_PIN_PE19,
> .vcc_pin = -EINVAL,
> };
> +#endif
>
>
> /*
> @@ -423,7 +433,11 @@ static void __init ek_board_init(void)
> /* Touchscreen */
> ek_add_device_ts();
> /* MMC */
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> + at91_add_device_mci(1,&mci1_data);
> +#else
> at91_add_device_mmc(1,&ek_mmc_data);
> +#endif
> /* Ethernet */
> at91_add_device_eth(&ek_macb_data);
> /* NAND */
> diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
> index b109ce2..bb06521 100644
> --- a/arch/arm/mach-at91/board-sam9rlek.c
> +++ b/arch/arm/mach-at91/board-sam9rlek.c
> @@ -64,12 +64,22 @@ static struct usba_platform_data __initdata ek_usba_udc_data = {
> /*
> * MCI (SD/MMC)
> */
> +#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
> static struct at91_mmc_data __initdata ek_mmc_data = {
> .wire4 = 1,
> .det_pin = AT91_PIN_PA15,
> .wp_pin = -EINVAL,
> .vcc_pin = -EINVAL,
> };
> +#elif defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> +static struct mci_platform_data __initdata mci0_data = {
> + .slot[0] = {
> + .bus_width = 4,
> + .detect_pin = AT91_PIN_PA15,
> + .wp_pin = -EINVAL,
> + },
> +};
> +#endif
>
>
> /*
> @@ -306,7 +316,11 @@ static void __init ek_board_init(void)
> /* SPI */
> at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
> /* MMC */
> +#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
> at91_add_device_mmc(0,&ek_mmc_data);
> +#elif defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> + at91_add_device_mci(0,&mci0_data);
> +#endif
> /* LCD Controller */
> at91_add_device_lcdc(&ek_lcdc_data);
> /* AC97 */
> diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c
> index b7483a3..879e34e 100644
> --- a/arch/arm/mach-at91/board-usb-a926x.c
> +++ b/arch/arm/mach-at91/board-usb-a926x.c
> @@ -114,7 +114,7 @@ static struct mmc_spi_platform_data at91_mmc_spi_pdata = {
> * SPI devices.
> */
> static struct spi_board_info usb_a9263_spi_devices[] = {
> -#if !defined(CONFIG_MMC_AT91)
> +#if !defined(CONFIG_MMC_AT91)&& !defined(CONFIG_MMC_ATMELMCI)
> { /* DataFlash chip */
> .modalias = "mtd_dataflash",
> .chip_select = 0,
> diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
> index 38dd279..3d3b8a6 100644
> --- a/arch/arm/mach-at91/board-yl-9200.c
> +++ b/arch/arm/mach-at91/board-yl-9200.c
> @@ -138,12 +138,22 @@ static struct at91_udc_data __initdata yl9200_udc_data = {
> /*
> * MMC
> */
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> +static struct mci_platform_data __initdata yl9200_mci0_data = {
> + .slot[0] = {
> + .bus_width = 4,
> + .detect_pin = AT91_PIN_PB9,
> + .wp_pin = -EINVAL,
> + },
> +};
> +#else
> static struct at91_mmc_data __initdata yl9200_mmc_data = {
> .det_pin = AT91_PIN_PB9,
> .wire4 = 1,
> .wp_pin = -EINVAL,
> .vcc_pin = -EINVAL,
> };
> +#endif
>
> /*
> * NAND Flash
> @@ -571,7 +581,11 @@ static void __init yl9200_board_init(void)
> /* I2C */
> at91_add_device_i2c(yl9200_i2c_devices, ARRAY_SIZE(yl9200_i2c_devices));
> /* MMC */
> +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
> + at91_add_device_mci(0,&yl9200_mci0_data);
> +#else
> at91_add_device_mmc(0,&yl9200_mmc_data);
> +#endif
> /* NAND */
> at91_add_device_nand(&yl9200_nand_data);
> /* NOR Flash */
More information about the linux-arm-kernel
mailing list