[PATCH v2 02/12] usb: chipidea: permit driver bindings pass phy pointer
Richard Zhao
richard.zhao at freescale.com
Mon May 21 05:23:47 EDT 2012
Sometimes, the driver bindings may know what phy they use.
For example, when using device tree, the usb controller may have a
phandler pointing to usb phy.
Signed-off-by: Richard Zhao <richard.zhao at freescale.com>
---
drivers/usb/chipidea/ci.h | 2 ++
drivers/usb/chipidea/core.c | 4 ++++
drivers/usb/chipidea/host.c | 1 +
drivers/usb/chipidea/udc.c | 11 +++++++----
include/linux/usb/chipidea.h | 3 +++
5 files changed, 17 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index 50911f8..71d7080 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -160,6 +160,8 @@ struct ci13xxx {
struct ci13xxx_udc_driver *udc_driver;
int vbus_active;
+ /* FIXME: some day, we'll not use global phy */
+ bool global_phy;
struct usb_phy *transceiver;
struct usb_hcd *hcd;
};
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 15e03b3..0492786 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -365,6 +365,10 @@ static int __devinit ci_hdrc_probe(struct platform_device *pdev)
ci->dev = dev;
ci->udc_driver = dev->platform_data;
+ if (ci->udc_driver->phy)
+ ci->transceiver = ci->udc_driver->phy;
+ else
+ ci->global_phy = 1;
ret = hw_device_init(ci, base);
if (ret < 0) {
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index 9eacd21..7bc11a5 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -121,6 +121,7 @@ static int host_start(struct ci13xxx *ci)
ehci = hcd_to_ehci(hcd);
ehci->caps = ci->hw_bank.cap;
ehci->has_hostpc = ci->hw_bank.lpm;
+ ehci->transceiver = ci->transceiver;
ret = usb_add_hcd(hcd, 0, 0);
if (ret)
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 51f9694..22139fae 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1687,7 +1687,8 @@ static int udc_start(struct ci13xxx *udc)
udc->gadget.ep0 = &udc->ep0in->ep;
- udc->transceiver = usb_get_transceiver();
+ if (udc->global_phy) {
+ udc->transceiver = usb_get_transceiver();
if (udc->udc_driver->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
if (udc->transceiver == NULL) {
@@ -1731,7 +1732,8 @@ static int udc_start(struct ci13xxx *udc)
remove_trans:
if (udc->transceiver) {
otg_set_peripheral(udc->transceiver->otg, &udc->gadget);
- usb_put_transceiver(udc->transceiver);
+ if (udc->global_phy)
+ usb_put_transceiver(udc->transceiver);
}
dev_err(dev, "error = %i\n", retval);
@@ -1740,7 +1742,7 @@ remove_dbg:
unreg_device:
device_unregister(&udc->gadget.dev);
put_transceiver:
- if (udc->transceiver)
+ if (udc->transceiver && udc->global_phy)
usb_put_transceiver(udc->transceiver);
free_pools:
dma_pool_destroy(udc->td_pool);
@@ -1774,7 +1776,8 @@ static void udc_stop(struct ci13xxx *udc)
if (udc->transceiver) {
otg_set_peripheral(udc->transceiver->otg, NULL);
- usb_put_transceiver(udc->transceiver);
+ if (udc->global_phy)
+ usb_put_transceiver(udc->transceiver);
}
dbg_remove_files(&udc->gadget.dev);
device_unregister(&udc->gadget.dev);
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index edb90d6..c46c9e9 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -5,12 +5,15 @@
#ifndef __LINUX_USB_CHIPIDEA_H
#define __LINUX_USB_CHIPIDEA_H
+#include <linux/usb/otg.h>
+
struct ci13xxx;
struct ci13xxx_udc_driver {
const char *name;
/* offset of the capability registers */
uintptr_t capoffset;
unsigned power_budget;
+ struct usb_phy *phy;
unsigned long flags;
#define CI13XXX_REGS_SHARED BIT(0)
#define CI13XXX_REQUIRE_TRANSCEIVER BIT(1)
--
1.7.5.4
More information about the linux-arm-kernel
mailing list