[RFC PATCH 00/11] OMAP System Control Module
Valentin, Eduardo
eduardo.valentin at ti.com
Fri May 25 07:11:26 EDT 2012
Konstantin,
On Fri, May 25, 2012 at 1:50 PM, Konstantin Baydarov
<kbaidarov at dev.rtsoft.ru> wrote:
> Hi.
>
> On 05/25/2012 12:25 PM, Eduardo Valentin wrote:
>> Hello Paul and Tony,
>>
>> This is a series of patches adding a basic support for system control module,
>> on OMAP4+ context. It is a working in progress, but I wanted to share already
>> to get your feedback.
>>
>> I've modeled the driver as an MFD. You will see in this series:
>> . A rework of the system control module header (patch from Santosh, picked from the list)
>> . Device creation for control module core
>> . Early device creation for control module core
>> . The MFD core driver for system control module
>> . The MFD child for usb-phy pin control
>> . The MFD child for bandgap sensor
>> . Very early exposure of OMAP4 thermal zone
>> . All added drivers are only supporting DT probing
>> . The series is based on linux-omap master, as it has the hwmod entries for SCM.
>>
>> The overall idea of this series is to put in place the infrastructure. It is
>> not touching nor removing the existing APIs under mach-omap2/control.c for now.
>> But the target is to have these APIs moved to the MFD core driver.
>>
>> For early access, like ID checking, I have written the platform driver
>> as an early platform driver and you will see also early device addition
>> and probing under device.c for this case. This is of course a proposal.
>> I see that there are people that thing this is a bit of an overkill.
>> Konstantin (CCd) was proposing a simpler solution by having
>> APIs with early_* prefixes, and solve the IO address mapping with
>> a DT entry, for instance. But feel free to propose better ways.
> In my latest version I got rid from early API set, check out patch for V3 patch set.
> I'll attach patch for current version later.
Please send it across so we can compare your approach with the one
present in this series.
>
> BR,
> Konstantin Baydarov.
>
>>
>> This code has been ripped off from the Android 3.1 branch. I have rewritten
>> a couple of things, but the major driver functions and API's entries are kept.
>>
>> So, based on this series, I see as a TODO list, for system control core driver:
>> - Start to move all the existing APIs under mach-omap2/control.c to the mfd core.
>> - Rewrite the users of the existing APIs, mentioned on previous item
>> Once we decide the API and agree on how to deal with early calls.
>> - Add remaining children (from top of my head, the CAM is one of them,
>> but I also think we should prob have one for HWOBS for instance)
>> - Test on boards that use the existing APIs.
>>
>> TODO list for bandgap driver:
>> - Improve thermal zone definition for OMAP4
>> - Introduce the thermal zones for OMAP5
>>
>> Amit, due to hwmod dep, I didn't include any cooling binding in this series,
>> based on the generic CPU cooling device.
>>
>> Overall series has been tested only with panda board OMAP4460.
>>
>> Your comments are welcome.
>>
>> All best,
>>
>> Eduardo Valentin (9):
>> ARM: OMAP: expose control.h to mach area
>> OMAP: Add early device for system control module
>> mfd: omap: control: core system control driver
>> OMAP2+: use control module mfd driver in omap_type
>> mfd: omap: control: usb-phy: introduce the ctrl-module usb driver
>> ARM: OMAP4+: Adding the temperature sensor register set bit fields
>> ARM: OMAP4+: thermal: introduce bandgap temperature sensor
>> omap4: thermal: add basic CPU thermal zone
>> ARM: DT: Add support to system control module for OMAP4
>>
>> Kishon Vijay Abraham I (1):
>> arm: omap: device: create a device for system control module
>>
>> Santosh Shilimkar (1):
>> ARM: OMAP4: Remove un-used control module headers and defines.
>>
>> .../devicetree/bindings/mfd/omap_control.txt | 44 +
>> .../devicetree/bindings/thermal/omap_bandgap.txt | 27 +
>> arch/arm/boot/dts/omap4.dtsi | 13 +
>> arch/arm/mach-omap2/Kconfig | 1 +
>> arch/arm/mach-omap2/am35xx-emac.c | 2 +-
>> arch/arm/mach-omap2/board-3430sdp.c | 2 +-
>> arch/arm/mach-omap2/board-4430sdp.c | 2 +-
>> arch/arm/mach-omap2/board-am3517crane.c | 2 +-
>> arch/arm/mach-omap2/board-am3517evm.c | 2 +-
>> arch/arm/mach-omap2/board-apollon.c | 2 +-
>> arch/arm/mach-omap2/board-cm-t3517.c | 2 +-
>> arch/arm/mach-omap2/board-h4.c | 2 +-
>> arch/arm/mach-omap2/board-igep0020.c | 2 +-
>> arch/arm/mach-omap2/board-ldp.c | 2 +-
>> arch/arm/mach-omap2/board-omap3logic.c | 2 +-
>> arch/arm/mach-omap2/board-omap4panda.c | 2 +-
>> arch/arm/mach-omap2/board-omap4pcm049.c | 2 +-
>> arch/arm/mach-omap2/clock2420_data.c | 2 +-
>> arch/arm/mach-omap2/clock2430_data.c | 2 +-
>> arch/arm/mach-omap2/clock3xxx_data.c | 2 +-
>> arch/arm/mach-omap2/clock44xx_data.c | 2 +-
>> arch/arm/mach-omap2/common.c | 2 +-
>> arch/arm/mach-omap2/control.c | 2 +-
>> arch/arm/mach-omap2/cpuidle34xx.c | 2 +-
>> arch/arm/mach-omap2/devices.c | 57 +-
>> arch/arm/mach-omap2/display.c | 2 +-
>> arch/arm/mach-omap2/hsmmc.c | 2 +-
>> arch/arm/mach-omap2/id.c | 18 +-
>> arch/arm/mach-omap2/{ => include/mach}/control.h | 163 ++-
>> .../include/mach/ctrl_module_core_44xx.h | 391 -----
>> .../include/mach/ctrl_module_pad_core_44xx.h | 1409 -----------------
>> .../include/mach/ctrl_module_pad_wkup_44xx.h | 236 ---
>> .../include/mach/ctrl_module_wkup_44xx.h | 92 --
>> arch/arm/mach-omap2/mcbsp.c | 2 +-
>> arch/arm/mach-omap2/mux.c | 2 +-
>> arch/arm/mach-omap2/omap_phy_internal.c | 2 +-
>> arch/arm/mach-omap2/opp3xxx_data.c | 2 +-
>> arch/arm/mach-omap2/opp4xxx_data.c | 2 +-
>> arch/arm/mach-omap2/pm24xx.c | 2 +-
>> arch/arm/mach-omap2/pm34xx.c | 2 +-
>> arch/arm/mach-omap2/prcm.c | 2 +-
>> arch/arm/mach-omap2/serial.c | 2 +-
>> arch/arm/mach-omap2/sleep34xx.S | 2 +-
>> arch/arm/mach-omap2/sr_device.c | 2 +-
>> arch/arm/mach-omap2/usb-fs.c | 2 +-
>> arch/arm/mach-omap2/voltage.c | 2 +-
>> arch/arm/plat-omap/Kconfig | 3 +
>> drivers/mfd/Kconfig | 9 +
>> drivers/mfd/Makefile | 1 +
>> drivers/mfd/omap-control-core.c | 211 +++
>> drivers/thermal/Kconfig | 25 +
>> drivers/thermal/Makefile | 5 +-
>> drivers/thermal/omap-bandgap.c | 1602 ++++++++++++++++++++
>> drivers/thermal/omap-bandgap.h | 75 +
>> drivers/thermal/omap4-thermal.c | 72 +
>> drivers/usb/otg/Kconfig | 13 +
>> drivers/usb/otg/Makefile | 1 +
>> drivers/usb/otg/omap4-usb-phy.c | 130 ++
>> include/linux/mfd/omap_control.h | 69 +
>> include/linux/usb/omap4_usb_phy.h | 53 +
>> 60 files changed, 2617 insertions(+), 2173 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/mfd/omap_control.txt
>> create mode 100644 Documentation/devicetree/bindings/thermal/omap_bandgap.txt
>> rename arch/arm/mach-omap2/{ => include/mach}/control.h (75%)
>> delete mode 100644 arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h
>> delete mode 100644 arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h
>> delete mode 100644 arch/arm/mach-omap2/include/mach/ctrl_module_pad_wkup_44xx.h
>> delete mode 100644 arch/arm/mach-omap2/include/mach/ctrl_module_wkup_44xx.h
>> create mode 100644 drivers/mfd/omap-control-core.c
>> create mode 100644 drivers/thermal/omap-bandgap.c
>> create mode 100644 drivers/thermal/omap-bandgap.h
>> create mode 100644 drivers/thermal/omap4-thermal.c
>> create mode 100644 drivers/usb/otg/omap4-usb-phy.c
>> create mode 100644 include/linux/mfd/omap_control.h
>> create mode 100644 include/linux/usb/omap4_usb_phy.h
>>
>
--
Eduardo Valentin
More information about the linux-arm-kernel
mailing list