[PATCH 37/39] ARM: OMAP2+: board zoom-debugboard: gpmc driver adaptation
Afzal Mohammed
afzal at ti.com
Tue May 1 08:10:30 EDT 2012
gpmc code has been converted to driver. Modify the board
code to provide gpmc driver with required information.
Signed-off-by: Afzal Mohammed <afzal at ti.com>
---
arch/arm/mach-omap2/board-zoom-debugboard.c | 47 +++++++++++++++------------
1 file changed, 27 insertions(+), 20 deletions(-)
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index f64f441..dae7df2 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -31,6 +31,13 @@
#define DEBUG_BASE 0x08000000
#define ZOOM_ETHR_START DEBUG_BASE
+static struct gpmc_device_pdata *gpmc_device_data[2];
+static struct gpmc_device_pdata **gpmc_cur = gpmc_device_data;
+
+static struct gpmc_pdata gpmc_data = {
+ .device_pdata = gpmc_device_data,
+};
+
static struct omap_smsc911x_platform_data zoom_smsc911x_cfg = {
.cs = ZOOM_SMSC911X_CS,
.gpio_irq = ZOOM_SMSC911X_GPIO,
@@ -40,7 +47,11 @@ static struct omap_smsc911x_platform_data zoom_smsc911x_cfg = {
static inline void __init zoom_init_smsc911x(void)
{
- gpmc_smsc911x_init(&zoom_smsc911x_cfg);
+ *gpmc_cur = gpmc_smsc911x_init(&zoom_smsc911x_cfg);
+ if (*gpmc_cur)
+ gpmc_data.num_device++, gpmc_cur++;
+ else
+ pr_err("error: %s: gpmc smsc911x setup\n", __func__);
}
static struct plat_serial8250_port serial_platform_data[] = {
@@ -56,18 +67,22 @@ static struct plat_serial8250_port serial_platform_data[] = {
}
};
-static struct platform_device zoom_debugboard_serial_device = {
+static struct gpmc_cs_data zoom_debugboard_gpmc_cs_serial_data = {
+ .cs = ZOOM_QUADUART_CS,
+ .mem_size = SZ_1M,
+};
+
+static struct gpmc_device_pdata zoom_debugboard_gpmc_serial_data = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_platform_data,
- },
+ .pdata = serial_platform_data,
+ .pdata_size = sizeof(serial_platform_data),
+ .cs_data = &zoom_debugboard_gpmc_cs_serial_data,
+ .num_cs = 1,
};
static inline void __init zoom_init_quaduart(void)
{
- int quart_cs;
- unsigned long cs_mem_base;
int quart_gpio = 0;
if (gpio_request_one(ZOOM_QUADUART_RST_GPIO,
@@ -78,14 +93,6 @@ static inline void __init zoom_init_quaduart(void)
return;
}
- quart_cs = ZOOM_QUADUART_CS;
-
- if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) {
- printk(KERN_ERR "Failed to request GPMC mem"
- "for Quad UART(TL16CP754C)\n");
- return;
- }
-
quart_gpio = ZOOM_QUADUART_GPIO;
if (gpio_request_one(quart_gpio, GPIOF_IN, "TL16CP754C GPIO") < 0)
@@ -93,6 +100,9 @@ static inline void __init zoom_init_quaduart(void)
quart_gpio);
serial_platform_data[0].irq = gpio_to_irq(102);
+
+ *gpmc_cur++ = &zoom_debugboard_gpmc_serial_data;
+ gpmc_data.num_device++;
}
static inline int omap_zoom_debugboard_detect(void)
@@ -116,10 +126,6 @@ static inline int omap_zoom_debugboard_detect(void)
return ret;
}
-static struct platform_device *zoom_devices[] __initdata = {
- &zoom_debugboard_serial_device,
-};
-
static struct regulator_consumer_supply dummy_supplies[] = {
REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
@@ -133,5 +139,6 @@ int __init zoom_debugboard_init(void)
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
zoom_init_smsc911x();
zoom_init_quaduart();
- return platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices));
+ omap_init_gpmc(&gpmc_data);
+ return 0;
}
--
1.7.10
More information about the linux-arm-kernel
mailing list