[PATCH v3 2/2] regulator: Add support for MAX77686.
yadi.brar01 at gmail.com
yadi.brar01 at gmail.com
Tue May 22 01:57:00 EDT 2012
From: Yadwinder Singh Brar <yadi.brar at samsung.com>
Add support for PMIC/regulator portion of MAX77686 multifunction device.
MAX77686 provides LDOs[1-26] and BUCKs[1-9]. This is initial release of driv
which supports setting and getting the voltage of a regulator with I2C
interface.
Signed-off-by: Yadwinder Singh Brar <yadi.brar at samsung.com>
---
drivers/regulator/Kconfig | 9 +
drivers/regulator/Makefile | 1 +
drivers/regulator/max77686.c | 387 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 397 insertions(+), 0 deletions(-)
create mode 100644 drivers/regulator/max77686.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index c86b886..e8f9417 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -195,6 +195,15 @@ config REGULATOR_MAX8998
via I2C bus. The provided regulator is suitable for S3C6410
and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
+config REGULATOR_MAX77686
+ tristate "Maxim 77686 regulator"
+ depends on MFD_MAX77686
+ help
+ This driver controls a Maxim 77686 voltage regulator via I2C
+ bus. The provided regulator is suitable for Exynos5 chips to
+ control VDD_ARM and VDD_INT voltages.It supports LDOs[1-26]
+ and BUCKs[1-9].
+
config REGULATOR_PCAP
tristate "Motorola PCAP2 regulator driver"
depends on EZX_PCAP
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 977fd46..d854453 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_REGULATOR_MAX8925) += max8925-regulator.o
obj-$(CONFIG_REGULATOR_MAX8952) += max8952.o
obj-$(CONFIG_REGULATOR_MAX8997) += max8997.o
obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
+obj-$(CONFIG_REGULATOR_MAX77686) += max77686.o
obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686.c
new file mode 100644
index 0000000..98dbd50
--- /dev/null
+++ b/drivers/regulator/max77686.c
@@ -0,0 +1,387 @@
+/*
+ * max77686.c - Regulator driver for the Maxim 77686
+ *
+ * Copyright (C) 2012 Samsung Electronics Co. Ltd.
+ * Chiwoong Byun <woong.byun at samsung.com>
+ * Yadwinder Singh Brar <yadi.brar at samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * This driver is based on max8997.c
+ */
+
+#include <linux/module.h>
+#include <linux/bug.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/mfd/max77686.h>
+#include <linux/mfd/max77686-private.h>
+
+struct max77686_data {
+ struct device *dev;
+ struct max77686_dev *iodev;
+ int num_regulators;
+ struct regulator_dev **rdev;
+ int ramp_delay; /* index of ramp_delay */
+
+ /*GPIO-DVS feature is not enabled with the
+ *current version of MAX77686 driver.*/
+};
+
+static int max77686_voltage_dvs_buck_time_sel(struct regulator_dev *rdev,
+ unsigned int old_sel,
+ unsigned int new_sel)
+{
+ struct max77686_data *max77686 = rdev_get_drvdata(rdev);
+ int ramp[] = {13, 27, 55, 100}; /* ramp_rate in mV/uS */
+
+ return DIV_ROUND_UP(rdev->desc->uV_step *
+ abs(new_sel - old_sel),
+ ramp[max77686->ramp_delay]);
+}
+
+static int max77686_voltage_time_sel(struct regulator_dev *rdev,
+ unsigned int old_sel,
+ unsigned int new_sel)
+{
+ return DIV_ROUND_UP(rdev->desc->uV_step *
+ abs(new_sel - old_sel),
+ 100);
+}
+
+static struct regulator_ops max77686_ops = {
+ .map_voltage = regulator_map_voltage_linear,
+ .list_voltage = regulator_list_voltage_linear,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_voltage_time_sel = max77686_voltage_time_sel,
+};
+
+static struct regulator_ops max77686_buck_ops = {
+ .map_voltage = regulator_map_voltage_linear,
+ .list_voltage = regulator_list_voltage_linear,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_voltage_time_sel = max77686_voltage_dvs_buck_time_sel,
+};
+
+#define regulator_desc_ldo(num) { \
+ .name = "LDO"#num, \
+ .id = MAX77686_LDO##num, \
+ .ops = &max77686_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = 800000, \
+ .uV_step = 50000, \
+ .n_voltages = 64, \
+ .vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
+ .vsel_mask = 0x3f, \
+ .enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
+ .enable_mask = 0x0c, \
+}
+#define regulator_desc_ldo_low_vol(num) { \
+ .name = "LDO"#num, \
+ .id = MAX77686_LDO##num, \
+ .ops = &max77686_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = 800000, \
+ .uV_step = 25000, \
+ .n_voltages = 64, \
+ .vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
+ .vsel_mask = 0x3f, \
+ .enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
+ .enable_mask = 0x0c, \
+}
+#define regulator_desc_buck(num) { \
+ .name = "BUCK"#num, \
+ .id = MAX77686_BUCK##num, \
+ .ops = &max77686_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = 750000, \
+ .uV_step = 50000, \
+ .n_voltages = 64, \
+ .vsel_reg = MAX77686_REG_BUCK5OUT + (num - 5) * 2, \
+ .vsel_mask = 0x3f, \
+ .enable_reg = MAX77686_REG_BUCK5CTRL + (num - 5) * 2, \
+ .enable_mask = 0x03, \
+}
+#define regulator_desc_buck1(num) { \
+ .name = "BUCK"#num, \
+ .id = MAX77686_BUCK##num, \
+ .ops = &max77686_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = 750000, \
+ .uV_step = 50000, \
+ .n_voltages = 64, \
+ .vsel_reg = MAX77686_REG_BUCK1OUT, \
+ .vsel_mask = 0x3f, \
+ .enable_reg = MAX77686_REG_BUCK1CTRL, \
+ .enable_mask = 0x03, \
+}
+#define regulator_desc_buck_dvs(num) { \
+ .name = "BUCK"#num, \
+ .id = MAX77686_BUCK##num, \
+ .ops = &max77686_buck_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = 600000, \
+ .uV_step = 12500, \
+ .n_voltages = 256, \
+ .vsel_reg = MAX77686_REG_BUCK2DVS1 + (num - 2) * 10, \
+ .vsel_mask = 0xff, \
+ .enable_reg = MAX77686_REG_BUCK2CTRL1 + (num - 2) * 10, \
+ .enable_mask = 0x30, \
+}
+
+static struct regulator_desc regulators[] = {
+ regulator_desc_ldo_low_vol(1),
+ regulator_desc_ldo_low_vol(2),
+ regulator_desc_ldo(3),
+ regulator_desc_ldo(4),
+ regulator_desc_ldo(5),
+ regulator_desc_ldo_low_vol(6),
+ regulator_desc_ldo_low_vol(7),
+ regulator_desc_ldo_low_vol(8),
+ regulator_desc_ldo(9),
+ regulator_desc_ldo(10),
+ regulator_desc_ldo(11),
+ regulator_desc_ldo(12),
+ regulator_desc_ldo(13),
+ regulator_desc_ldo(14),
+ regulator_desc_ldo(15),
+ regulator_desc_ldo(16),
+ regulator_desc_ldo(17),
+ regulator_desc_ldo(18),
+ regulator_desc_ldo(19),
+ regulator_desc_ldo(20),
+ regulator_desc_ldo(21),
+ regulator_desc_ldo(22),
+ regulator_desc_ldo(23),
+ regulator_desc_ldo(24),
+ regulator_desc_ldo(25),
+ regulator_desc_ldo(26),
+ regulator_desc_buck1(1),
+ regulator_desc_buck_dvs(2),
+ regulator_desc_buck_dvs(3),
+ regulator_desc_buck_dvs(4),
+ regulator_desc_buck(5),
+ regulator_desc_buck(6),
+ regulator_desc_buck(7),
+ regulator_desc_buck(8),
+ regulator_desc_buck(9),
+};
+
+#ifdef CONFIG_OF
+static int max77686_pmic_dt_parse_pdata(struct max77686_dev *iodev,
+ struct max77686_platform_data *pdata)
+{
+ struct device_node *pmic_np, *regulators_np;
+ struct of_regulator_match *rdata;
+ unsigned int i, ret;
+
+ pmic_np = iodev->dev->of_node;
+ if (!pmic_np) {
+ dev_err(iodev->dev, "could not find pmic sub-node\n");
+ return -ENODEV;
+ }
+
+ regulators_np = of_find_node_by_name(pmic_np, "voltage-regulators");
+ if (!regulators_np) {
+ dev_err(iodev->dev, "could not find regulators sub-node\n");
+ return -EINVAL;
+ }
+
+ /* count the number of regulators to be supported in pmic */
+ pdata->num_regulators = ARRAY_SIZE(regulators);
+
+ rdata = devm_kzalloc(iodev->dev, sizeof(*rdata) *
+ (pdata->num_regulators), GFP_KERNEL);
+ if (!rdata) {
+ dev_err(iodev->dev,
+ "could not allocate memory for regulator data\n");
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < pdata->num_regulators; i++)
+ rdata[i].name = regulators[i].name;
+
+ ret = of_regulator_match(iodev->dev, regulators_np, rdata,
+ pdata->num_regulators);
+
+ if (ret < 0)
+ dev_err(iodev->dev, "Parsing DT for regulators failed\n");
+ else
+ dev_info(iodev->dev, "regulators found in device tree : %d\n"
+ , ret);
+
+ pdata->regulators = rdata;
+
+ if (of_property_read_u32(pmic_np, "max77686,buck_ramp_delay", &i))
+ pdata->ramp_delay = i & 0xff;
+
+ return 0;
+}
+#else
+static int max77686_pmic_dt_parse_pdata(struct max77686_dev *iodev,
+ struct max77686_platform_data *pdata)
+{
+ return 0;
+}
+#endif /* CONFIG_OF */
+
+static __devinit int max77686_pmic_probe(struct platform_device *pdev)
+{
+ struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+ struct max77686_platform_data *pdata = iodev->pdata;
+ struct regulator_dev **rdev;
+ struct max77686_data *max77686;
+ struct i2c_client *i2c = iodev->i2c;
+ struct regulator_config config = { };
+ int i, ret, size;
+
+ if (iodev->dev->of_node) {
+ ret = max77686_pmic_dt_parse_pdata(iodev, pdata);
+ if (ret)
+ return ret;
+ } else { /* pdata from machine-setup file */
+ if (!pdata) {
+ dev_err(&pdev->dev, "platform data not found\n");
+ return -ENODEV;
+ } else {
+ if (pdata->num_regulators != ARRAY_SIZE(regulators)) {
+ dev_err(&pdev->dev,
+ "incomplete regulator list\n");
+ return -ENODEV;
+ }
+ }
+ }
+
+ max77686 = devm_kzalloc(&pdev->dev, sizeof(struct max77686_data),
+ GFP_KERNEL);
+ if (!max77686)
+ return -ENOMEM;
+
+ size = sizeof(struct regulator_dev *) * pdata->num_regulators;
+ max77686->rdev = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
+ if (!max77686->rdev) {
+ kfree(max77686);
+ return -ENOMEM;
+ }
+
+ rdev = max77686->rdev;
+
+ max77686->dev = &pdev->dev;
+ max77686->iodev = iodev;
+ max77686->num_regulators = pdata->num_regulators;
+
+ if (pdata->ramp_delay < MAX77686_RAMP_RATE_13MV ||
+ pdata->ramp_delay > MAX77686_RAMP_RATE_100MV)
+ pdata->ramp_delay = MAX77686_RAMP_RATE_27MV; /* default */
+
+ max77686->ramp_delay = pdata->ramp_delay - 1;
+ max77686_update_reg(i2c, MAX77686_REG_BUCK2CTRL1,
+ max77686->ramp_delay << 6, RAMP_MASK);
+ max77686_update_reg(i2c, MAX77686_REG_BUCK3CTRL1,
+ max77686->ramp_delay << 6, RAMP_MASK);
+ max77686_update_reg(i2c, MAX77686_REG_BUCK4CTRL1,
+ max77686->ramp_delay << 6, RAMP_MASK);
+
+ platform_set_drvdata(pdev, max77686);
+
+ for (i = 0; i < pdata->num_regulators; i++) {
+ config.dev = max77686->dev;
+ config.init_data = pdata->regulators[i].init_data;
+ config.driver_data = max77686;
+ config.regmap = iodev->regmap;
+
+ rdev[i] = regulator_register(®ulators[i], &config);
+ if (IS_ERR(rdev[i])) {
+ ret = PTR_ERR(rdev[i]);
+ dev_err(max77686->dev,
+ "regulator init failed for id : %d\n", i);
+ rdev[i] = NULL;
+ goto err;
+ }
+ }
+
+ return 0;
+ err:
+ for (i = 0; i < max77686->num_regulators; i++)
+ if (rdev[i])
+ regulator_unregister(rdev[i]);
+
+ return ret;
+}
+
+static int __devexit max77686_pmic_remove(struct platform_device *pdev)
+{
+ struct max77686_data *max77686 = platform_get_drvdata(pdev);
+ struct regulator_dev **rdev = max77686->rdev;
+ int i;
+
+ for (i = 0; i < max77686->num_regulators; i++)
+ if (rdev[i])
+ regulator_unregister(rdev[i]);
+
+ return 0;
+}
+
+static const struct platform_device_id max77686_pmic_id[] = {
+ {"max77686-pmic", 0},
+ {},
+};
+MODULE_DEVICE_TABLE(platform, max77686_pmic_id);
+
+static struct platform_driver max77686_pmic_driver = {
+ .driver = {
+ .name = "max77686-pmic",
+ .owner = THIS_MODULE,
+ },
+ .probe = max77686_pmic_probe,
+ .remove = __devexit_p(max77686_pmic_remove),
+ .id_table = max77686_pmic_id,
+};
+
+static int __init max77686_pmic_init(void)
+{
+ return platform_driver_register(&max77686_pmic_driver);
+}
+subsys_initcall(max77686_pmic_init);
+
+static void __exit max77686_pmic_cleanup(void)
+{
+ platform_driver_unregister(&max77686_pmic_driver);
+}
+module_exit(max77686_pmic_cleanup);
+
+MODULE_DESCRIPTION("MAXIM 77686 Regulator Driver");
+MODULE_AUTHOR("Chiwoong Byun <woong.byun at samsung.com>");
+MODULE_AUTHOR("Yadwinder Singh Brar <yadi.brar at samsung.com>");
+MODULE_LICENSE("GPL");
--
1.7.0.4
More information about the linux-arm-kernel
mailing list