[PATCH 6/8] CI13xxx: Add i.MX233/i.MX28 binding code
Marek Vasut
marex at denx.de
Wed May 16 09:41:17 EDT 2012
Dear Felipe Balbi,
> On Tue, May 15, 2012 at 10:23:37AM +0200, Marek Vasut wrote:
> > This codes connects the CI13xxx driver with the core found inside of
> > the Freescale i.MX244/i.MX28 CPU.
> >
> > Signed-off-by: Marek Vasut <marex at denx.de>
> > Cc: Alan Stern <stern at rowland.harvard.edu>
> > Cc: Detlev Zundel <dzu at denx.de>
> > CC: Dong Aisheng <b29396 at freescale.com>
> > CC: Fabio Estevam <fabio.estevam at freescale.com>
> > Cc: Felipe Balbi <balbi at ti.com>
> > Cc: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
> > Cc: Linux ARM kernel <linux-arm-kernel at lists.infradead.org>
> > Cc: linux-i2c at vger.kernel.org
> > CC: Sascha Hauer <s.hauer at pengutronix.de>
> > CC: Shawn Guo <shawn.guo at linaro.org>
> > Cc: Stefano Babic <sbabic at denx.de>
> > CC: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
> > Cc: Wolfgang Denk <wd at denx.de>
> > Cc: Wolfram Sang <w.sang at pengutronix.de>
> > ---
> >
> > drivers/usb/chipidea/Makefile | 4 +
> > drivers/usb/chipidea/ci13xxx_mxs.c | 201
> > ++++++++++++++++++++++++++++++++++++ 2 files changed, 205 insertions(+)
> > create mode 100644 drivers/usb/chipidea/ci13xxx_mxs.c
> >
> > diff --git a/drivers/usb/chipidea/Makefile
> > b/drivers/usb/chipidea/Makefile index cc34937..266d57d 100644
> > --- a/drivers/usb/chipidea/Makefile
> > +++ b/drivers/usb/chipidea/Makefile
> > @@ -12,3 +12,7 @@ endif
> >
> > ifneq ($(CONFIG_ARCH_MSM),)
> >
> > obj-$(CONFIG_USB_CHIPIDEA) += ci13xxx_msm.o
> >
> > endif
> >
> > +
> > +ifneq ($(CONFIG_ARCH_MXS),)
> > + obj-$(CONFIG_USB_CHIPIDEA) += ci13xxx_mxs.o
> > +endif
>
> NAK... let it compile everywhere.
I just followed the pattern here, honestly I think this is quite OK so far.
Further improvements can be made indeed.
> > diff --git a/drivers/usb/chipidea/ci13xxx_mxs.c
> > b/drivers/usb/chipidea/ci13xxx_mxs.c new file mode 100644
> > index 0000000..fcca90b
> > --- /dev/null
> > +++ b/drivers/usb/chipidea/ci13xxx_mxs.c
> > @@ -0,0 +1,201 @@
> > +/*
> > + * drivers/usb/chipidea/ci13xxx_mxs.c
> > + *
> > + * Freescale i.MX233/i.MX28 USB glue driver to CI13xxx core.
> > + *
> > + * Copyright (C) 2012 Marek Vasut <marex at denx.de>
> > + * on behalf of DENX Software Engineering GmbH
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program; if not, write to the Free Software
> > + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> > + */
> > +
> > +#include <linux/module.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/clk.h>
> > +#include <linux/dma-mapping.h>
> > +
> > +#include <linux/usb.h>
> > +#include <linux/usb/chipidea.h>
> > +#include <linux/usb/ch9.h>
> > +#include <linux/usb/otg.h>
> > +#include <linux/usb/gadget.h>
> > +#include <linux/usb/hcd.h>
> > +#include <linux/usb/ehci_def.h>
> > +
> > +#include <linux/usb/mxs-usb.h>
> > +
> > +#include "ci.h"
> > +
> > +static void ci13xxx_mxs_notify(struct ci13xxx *ci, unsigned event)
> > +{
> > + uint32_t status;
> > + struct usb_phy *phy;
> > + struct mxs_ci13xxx_phy_notify notify;
> > +
> > + phy = usb_get_transceiver();
> > + if (!phy)
> > + return;
> > +
> > + if (event != CI13XXX_CONTROLLER_HOST_IRQ_EVENT)
> > + return;
> > +
> > + status = hw_read(ci, OP_USBSTS, ~0);
> > +
> > + notify.discon = status & STS_PCD;
> > +
> > + usb_phy_notify(phy, ¬ify);
> > +}
> > +
> > +static struct ci13xxx_udc_driver ci13xxx_mxs_udc_driver = {
> > + .name = "ci13xxx_mxs",
> > + .flags = /*CI13XXX_REGS_SHARED |*/
> > + CI13XXX_REQUIRE_TRANSCEIVER |
> > + CI13XXX_PULLUP_ON_VBUS |
> > + CI13XXX_DISABLE_STREAMING,
> > + .capoffset = 0x100,
> > + .notify_event = ci13xxx_mxs_notify,
> > +};
> > +
> > +struct ci13xxx_mxs_data {
> > + struct clk *clk;
> > + struct platform_device *pdev;
> > +};
> > +
> > +static int __devinit ci13xxx_mxs_probe(struct platform_device *pdev)
> > +{
> > + struct ci13xxx_mxs_data *data;
> > + int ret;
> > + struct usb_phy *phy;
> > +
> > + phy = usb_get_transceiver();
> > + if (!phy)
> > + return -EPROBE_DEFER;
> > +
> > + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> > + if (!data) {
> > + dev_err(&pdev->dev, "Failed to allocate CI13xxx-MXS data!\n");
> > + return -ENOMEM;
> > + }
> > +
> > + ret = usb_phy_init(phy);
> > + if (ret) {
> > + dev_err(&pdev->dev, "Failed to initialize PHY!\n");
> > + return -EINVAL;
> > + }
> > +
> > + data->pdev = platform_device_alloc("ci_hdrc", -1);
> > + if (!data->pdev) {
> > + dev_err(&pdev->dev,
> > + "Failed to allocate ci_hdrc platform device!\n");
> > + ret = -ENOMEM;
> > + goto put_phy;
> > + }
> > +
> > + /* Add DMA mask */
> > + data->pdev->dev.dma_mask = devm_kzalloc(&pdev->dev,
> > + sizeof(*data->pdev->dev.dma_mask),
> > + GFP_KERNEL);
> > + if (!data->pdev->dev.dma_mask) {
> > + ret = -ENOMEM;
> > + goto put_platform;
> > + }
> > +
> > + *data->pdev->dev.dma_mask = DMA_BIT_MASK(32);
> > + data->pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
>
> why don't you just point to the parent's ?
Good idea, thanks :)
More information about the linux-arm-kernel
mailing list